source: wiki/pages/TracUpgrade @ 29080

Last change on this file since 29080 was 26484, checked in by obi, 10 years ago

add wiki pages

File size: 12.9 KB
1= Upgrade Instructions =
5== Instructions ==
7Typically, there are seven steps involved in upgrading to a newer version of Trac:
9=== 1. Bring your server off-line
11It is not a good idea to update a running server: the server processes may have parts of the current packages cached in memory, and updating the code will likely trigger [#ZipImportError internal errors].
13=== 2. Update the Trac Code === #UpdatetheTracCode
15Get the new version as described in TracInstall, or your operating system specific procedure.
17If you already have a 0.11 version of Trac installed via `easy_install`, it might be easiest to also use `easy_install` to upgrade your Trac installation:
20# easy_install --upgrade Trac==0.12
23If you do a manual (not operating system-specific) upgrade, you should also stop any running Trac servers before the installation. Doing "hot" upgrades is not advised, especially on Windows ([trac:#7265]).
25You may also want to remove the pre-existing Trac code by deleting the `trac` directory from the Python `lib/site-packages` directory, or remove Trac `.egg` files from former versions.
26The location of the site-packages directory depends on the operating system and the location in which Python was installed. However, the following locations are typical:
27 * on Linux: `/usr/lib/python2.X/site-packages`
28 * on Windows: `C:\Python2.X\lib\site-packages`
29 * on MacOSX: `/Library/Python/2.X/site-packages`
31You may also want to remove the Trac `cgi-bin`, `htdocs`, `templates` and `wiki-default` directories that are commonly found in a directory called `share/trac`. (The exact location depends on your platform.)
33This cleanup is not mandatory, but makes it easier to troubleshoot issues later on, as you won't waste your time looking at code or templates from a previous release that are not being used anymore... As usual, make a backup before actually deleting things.
35=== 3. Upgrade the Trac Environment === #UpgradetheTracEnvironment
37Environment upgrades are not necessary for minor version releases unless otherwise noted.
39After restarting, Trac should show the instances which need a manual upgrade via the automated upgrade scripts to ease the pain. These scripts are run via [TracAdmin trac-admin]:
41trac-admin /path/to/projenv upgrade
44This command will do nothing if the environment is already up-to-date.
46Note that a backup of your database will be performed automatically prior to the upgrade.
47This feature is relatively new for the PostgreSQL or MySQL database backends, so if it fails, you will have to backup the database manually. Then, to perform the actual upgrade, run:
49trac-admin /path/to/projenv upgrade --no-backup
52=== 4. Update the Trac Documentation === #UpdatetheTracDocumentation
54Every [TracEnvironment Trac environment] includes a copy of the Trac documentation for the installed version. As you probably want to keep the included documentation in sync with the installed version of Trac, [TracAdmin trac-admin] provides a command to upgrade the documentation:
56trac-admin /path/to/projenv wiki upgrade
59Note that this procedure will leave your `WikiStart` page intact.
62=== 5. Refresh static resources ===
64If you have set up a web server to give out static resources directly (accessed using the `/chrome/` URL) then you will need to refresh them using the same command:
66trac-admin /path/to/env deploy /deploy/path
68this will extract static resources and CGI scripts (`trac.wsgi`, etc) from new Trac version and its plugins into `/deploy/path`.
70Some web browsers (IE, Opera) cache CSS and Javascript files aggressively, so you may need to instruct your users to manually erase the contents of their browser's cache, a forced refreshed (`<F5>`) should be enough.
72Remove above note once #9936 is fixed.
75=== 6. Steps specific to a given Trac version  ===
76==== Upgrading from Trac 0.12 to Trac 1.0 ==== #to1.0
78The Trac components for Subversion support are no longer enabled by default. To enable the svn support, you need to make sure the `tracopt.versioncontrol.svn` components are enabled, for example by setting the following in the TracIni:
81tracopt.versioncontrol.svn.* = enabled
83The upgrade procedure should take care of this and change the TracIni appropriately, unless you already had the svn components explicitly disabled.
85Another step in the automatic upgrade will change the way the attachments are stored. If you're a bit paranoid, you might want to take a backup of the `attachments` directory before upgrading (but if you are, you already did a full copy of the environment, no?). In case the `attachments` directory contains some files which are //not// attachments, the last step of the migration to the new layout will fail: the deletion of the now unused `attachments` directory can't be done if there are still files and folders in it. You may ignore this error, but better go have a look to these files, move them elsewhere and remove the `attachments` directory manually to cleanup the environment. The attachments themselves are now all located in your environment below the `files/attachments` directory.
88==== Upgrading from Trac 0.11 to Trac 0.12 ====
90===== Python 2.3 no longer supported =====
91The minimum supported version of python is now 2.4
93===== SQLite v3.x required =====
94SQLite v2.x is no longer supported. If you still use a Trac database of this format, you'll need to convert it to SQLite v3.x first. See [trac:PySqlite#UpgradingSQLitefrom2.xto3.x] for details.
96===== PySqlite 2 required =====
97PySqlite 1.1.x is no longer supported. Please install 2.5.5 or later if possible (see [#Tracdatabaseupgrade Trac database upgrade] below).
99===== Multiple Repository Support =====
100The latest version includes support for multiple repositories. If you plan to add more repositories to your Trac instance, please refer to TracRepositoryAdmin#Migration.
102This may be of interest to users with only one repository, since there's now a way to avoid the potentially costly resync check at every request.
104===== Resynchronize the Trac Environment Against the Source Code Repository =====
106Each [TracEnvironment Trac environment] must be resynchronized against the source code repository in order to avoid errors such as "[ No changeset ??? in the repository]" while browsing the source through the Trac interface:
109trac-admin /path/to/projenv repository resync '*'
112===== Improved repository synchronization =====
113In addition to supporting multiple repositories, there is now a more efficient method for synchronizing Trac and your repositories.
115While you can keep the same synchronization as in 0.11 adding the post-commit hook as outlined in TracRepositoryAdmin#Synchronization and TracRepositoryAdmin#ExplicitSync will allow more efficient synchronization and is more or less required for multiple repositories.
117Note that if you were using the `trac-post-commit-hook`, ''you're strongly advised to upgrade it'' to the new hook documented in the above references and [TracWorkflow#Howtocombinethetracopt.ticket.commit_updaterwiththetestingworkflow here], as the old hook will not work with anything else than the default repository and even for this case, it won't trigger the appropriate notifications.
119===== Authz permission checking =====
120The authz permission checking has been migrated to a fine-grained permission policy. If you use authz permissions (aka `[trac] authz_file` and `authz_module_name`), you must add `AuthzSourcePolicy` in front of your permission policies in `[trac] permission_policies`. You must also remove `BROWSER_VIEW`, `CHANGESET_VIEW`, `FILE_VIEW` and `LOG_VIEW` from your global permissions (with `trac-admin $ENV permission remove` or the "Permissions" admin panel).
122===== Microsecond timestamps =====
123All timestamps in database tables (except the `session` table) have been changed from "seconds since epoch" to "microseconds since epoch" values. This change should be transparent to most users, except for custom reports. If any of your reports use date/time columns in calculations (e.g. to pass them to `datetime()`), you must divide the values retrieved from the database by 1'000'000. Similarly, if a report provides a calculated value to be displayed as a date/time (i.e. with a column named "time", "datetime", "changetime", "date", "created" or "modified"), you must provide a microsecond timestamp, that is, multiply your previous calculation with 1'000'000.
125==== Upgrading from Trac 0.10 to Trac 0.11 ====
126===== Site Templates and Styles =====
127The templating engine has changed in 0.11 to Genshi, please look at TracInterfaceCustomization for more information.
129If you are using custom CSS styles or modified templates in the `templates` directory of the TracEnvironment, you will need to convert them to the Genshi way of doing things. To continue to use your style sheet, follow the instructions at TracInterfaceCustomization#SiteAppearance.
131===== Trac Macros, Plugins =====
132The Trac macros will need to be adapted, as the old-style wiki-macros are not supported anymore (due to the drop of [trac:ClearSilver] and the HDF); they need to be converted to the new-style macros, see WikiMacros. When they are converted to the new style, they need to be placed into the plugins directory instead and not wiki-macros, which is no longer scanned for macros or plugins.
134===== For FCGI/WSGI/CGI users =====
135For those who run Trac under the CGI environment, run this command in order to obtain the trac.*gi file:
137trac-admin /path/to/env deploy /deploy/directory/path
140This will create a deploy directory with the following two subdirectories: `cgi-bin` and `htdocs`. Then update your Apache configuration file `httpd.conf` with this new `trac.cgi` location and `htdocs` location.
142===== Web Admin plugin integrated =====
143If you had the webadmin plugin installed, you can uninstall it as it is part of the Trac code base since 0.11.
145=== 7. Restart the Web Server === #RestarttheWebServer
147If you are not running [wiki:TracCgi CGI], reload the new Trac code by restarting your web server.
149== Known Issues ==
151Things you should pay attention to, while upgrading.
153=== Customized Templates
155Trac supports customization of its Genshi templates by placing copies of the templates in the `<env>/templates` folder of your [TracEnvironment environment] or in a common location specified in the [[TracIni#GlobalConfiguration| [inherit] templates_dir]] configuration setting. If you choose to do so, be wary that you will need to repeat your changes manually on a copy of the new templates when you upgrade to a new release of Trac (even a minor one), as the templates will likely evolve. So keep a diff around ;-)
157The preferred way to perform TracInterfaceCustomization is to write a custom plugin doing an appropriate `ITemplateStreamFilter` transformation, as this is more robust in case of changes: we usually won't modify element `id`s or change CSS `class`es, and if we have to do so, this will be documented in the TracDev/ApiChanges pages.
159=== !ZipImportError ===
161Due to internal caching of zipped packages,  whenever the content of the packages change on disk, the in-memory zip index will no longer match and you'll get irrecoverable !ZipImportError errors. Better anticipate and bring your server down for maintenance before upgrading.
162See [trac:#7014] for details.
164=== Wiki Upgrade ===
165`trac-admin` will not delete or remove default wiki pages that were present in a previous version but are no longer in the new version.
167=== Trac database upgrade ===
169A known issue in some versions of PySqlite (2.5.2-2.5.4) prevents the trac-admin upgrade script from successfully upgrading the database format. It is advised to use either a newer or older version of the sqlite python bindings to avoid this error. For more details see ticket [trac:#9434].
171=== parent dir ===
172If you use a trac parent env configuration and one of the plugins in one child does not work, none of the children work.
174== Related topics
176=== Upgrading Python ===
178Upgrading Python to a newer version will require reinstallation of Python packages: Trac of course; also [ easy_install], if you've been using that.  Assuming you're using Subversion, you'll also need to upgrade the Python bindings for svn.
180==== Windows and Python 2.6 ====
182If you've been using !CollabNet's Subversion package, you may need to uninstall that in favor of [ Alagazam], which has the Python bindings readily available (see TracSubversion).  The good news is, that works with no tweaking.
184=== Changing Database Backend ===
185==== SQLite to PostgreSQL ====
187The [ sqlite2pg] script on [] has been written to assist in migrating a SQLite database to a PostgreSQL database
189=== Upgrading from older versions of Trac === #OlderVersions
191For upgrades from versions older than Trac 0.10, refer first to [trac:wiki:0.10/TracUpgrade#SpecificVersions].
194See also: TracGuide, TracInstall
Note: See TracBrowser for help on using the repository browser.