source: wiki/pages/de/Installation-Recovery @ 28196

Last change on this file since 28196 was 28196, checked in by aafsvn, 10 years ago

[titan] autoupdate wiki files

File size: 23.1 KB
Line 
1----
2'''8 Installation / Recovery Inhaltsverzeichnis''' [=#point8] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
3
4----
5[[br]]
6
7This section contains information on instalation and removal of TitanNit from your receiver
8
9[[br]]
10'''SH4 Models'''
11
12 * [#point8.1 8.1 Atemio510 und kompatible Modelle]
13 * [#point8.2 8.2 Atemio520 und kompatible Modelle]
14 * [#point8.3 8.3 Atemio530 und kompatible Modelle]
15 * [#point8.4 8.4 Atemio7600 und kompatible Modelle]
16 * [#point8.5 8.5 Atevio700 und kompatible Modelle ]
17 * [#point8.6 8.6 Atevio7000 und kompatible Modelle]
18 * [#point8.7 8.7 Ufs910]
19 * [#point8.8 8.8 Ufs912]
20 * [#point8.9 8.9 Ufs922]
21
22'''MIPS Models'''
23
24 * [#point8.10 8.10 Atemio5000]
25 * [#point8.11 8.11 Atemio5200]
26
27'''Aditional Info'''
28
29 * [#point8.12 8.12 Installation auf anderen Fortis Modellen]
30 * [#point8.13 8.13 Deinstallation auf anderen Fortis Modellen]
31 * [#point8.14 8.14 IRD Update Titan]
32 * [#point8.15 8.15 IRD Download Locations]
33[[br]]
34[[br]]
35[[br]]
36
37
38'''SH4 Models'''
39----
40'''8.1 Atemio510''' [=#point8.1] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
41----
42'' Wie installiere ich ein Atemio 510 IRD Image? ''
43 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.15 IRD Download Locations])
44 * Entpacken Sie die ZIP-Datei
45 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.
46     Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
47     Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
48 * USB Stick mit der IRD-Datei anschließen
49 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die die CH+ am Gerät (1 Taste von rechts) solange gedrückt halten (ca. 15 Sekunden), bis „search IRD File…“ erscheint,
50   anschließend beginnt die Installation. Erst danach die Taste loslassen
51     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
52 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
53
54[[br]]
55
56----
57'''8.2 Atemio520''' [=#point8.2] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
58----
59'' Wie installiere ich ein Atemio 520 IRD Image? ''
60 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.15 IRD Download Locations])
61 * Entpacken Sie die ZIP-Datei
62 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.
63     Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
64     Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
65 * Schalten Sie das Gerät aus.
66 * USB Stick mit der IRD-Datei anschließen
67 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Power Taste vorne am Gerät (die Taste in der Mitte) solange gedrückt halten (ca. 15 Sekunden), bis „search IRD File…“ erscheint,
68   anschließend beginnt die Installation. Erst danach die Taste loslassen
69     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
70 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
71
72[[br]]
73
74----
75'''8.3 Atemio530''' [=#point8.3] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
76----
77'' Wie installiere ich ein Atemio 530 IRD Image? ''
78 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.15 IRD Download Locations])
79 * Entpacken Sie die ZIP-Datei
80 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.
81     Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
82     Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
83 * Schalten Sie das Gerät aus.
84 * USB Stick mit der IRD-Datei anschließen
85 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die CH+ am Gerät (1 Taste von rechts) solange gedrückt halten (ca. 15 Sekunden), bis „search IRD File…“ erscheint,
86   anschließend beginnt die Installation. Erst danach die Taste loslassen
87     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
88 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
89
90[[br]]
91----
92'''8.4 Atemio7600''' [=#point8.4] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])----
93'' Wie installiere ich ein Atemio 7600 IRD Image? ''
94 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.15 IRD Download Locations])
95 * Entpacken Sie die ZIP-Datei
96 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.
97     Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
98     Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
99 * Schalten Sie das Gerät aus.
100 * USB Stick mit der IRD-Datei anschließen
101 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die CH+ am Gerät (1 Taste von rechts) solange gedrückt halten (ca. 15 Sekunden), bis „search IRD File…“ erscheint,
102   anschließend beginnt die Installation. Erst danach die Taste loslassen
103     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
104 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
105
106[[br]]
107----
108'''8.5 Atevio700''' [=#point8.5] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
109----
110'' Wie installiere ich ein Atevio 700 IRD Image? ''
111 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.15 IRD Download Locations])
112 * Entpacken Sie die ZIP-Datei
113 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.
114     Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
115     Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
116 * Schalten Sie das Gerät aus.
117 * USB Stick mit der IRD-Datei anschließen
118 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die die CH+ am Gerät (1 Taste von rechts) solange gedrückt halten (ca. 15 Sekunden), bis „search IRD File…“ erscheint,
119   anschließend beginnt die Installation. Erst danach die Taste loslassen
120     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
121 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
122
123[[br]]
124----
125'''8.6 Atevio7000''' [=#point8.6] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
126----
127'' Wie installiere ich ein Atevio 7000 IRD Image? ''
128 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich aktuellest TitanNit Firmware. ([#point8.15 IRD Download Locations])
129 * Entpacken Sie die ZIP-Datei
130 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.
131     Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
132     Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
133 * Schalten Sie das Gerät aus.
134 * USB Stick mit der IRD-Datei anschließen
135 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die CH+ am Gerät (1 Taste von rechts) solange gedrückt halten (ca. 15 Sekunden), bis „search IRD File…“ erscheint,
136   anschließend beginnt die Installation. Erst danach die Taste loslassen
137     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
138 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
139
140[[br]]
141----
142'''8.7 Kathrein Ufs910''' [=#point8.7] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
143----
144
145'' Wie installiere ich ein Kathrein UFS910 Update Image? ''
146 * Beim Installieren per usb wird der MNT Bereich im Image gelöscht das ist gleichzusetzen wie ein (Recovery-Image), beim Onlineupdate bleibt der Bereich erhalten.
147 * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.15 IRD Download Locations])
148 * Entpacken Sie die ZIP-Datei.
149 * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und nennen Sie in miniFLASH.img um.
150     Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
151     Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
152 * Schalten Sie das Gerät aus.
153 * USB Stick mit der Update-Datei anschließen
154 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig mit der Fernbedinung 5 sekunden auf die Record Taste drücken bis „miniFlash search“ erscheint,
155   anschließend beginnt die Installation. Erst danach die Taste loslassen
156     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
157 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
158
159
160[[br]]
161----
162'''8.8 Kathrein UFS912''' [=#point8.8] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
163----
164'' Wie installiere ich ein Kathrein UFS912 Update Image? ''
165 * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.15 IRD Download Locations])
166 * Entpacken Sie die ZIP-Datei.
167 * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und platzieren sie die Datei im /kathrein/ufs912 Ordner
168     Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
169     Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
170 * Schalten Sie das Gerät aus.
171 * USB Stick mit der Update-Datei anschließen
172 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Radio-Taste am Gerät solange gedrückt halten (ca. 5 Sekunden), bis „emergency boot“ erscheint,
173   anschließend beginnt die Installation. Erst danach die Taste loslassen
174     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
175 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
176
177[[br]]
178----
179'''8.9 Kathrein UFS922''' [=#point8.9] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
180----
181'' Wie installiere ich ein Kathrein UFS922 Update Image? ''
182 * Beim Installieren per usb wird der MNT Bereich im Image gelöscht das ist gleichzusetzen wie ein (Recovery-Image), beim Onlineupdate bleibt der Bereich erhalten.
183 * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.15 IRD Download Locations])
184 * Entpacken Sie die ZIP-Datei.
185 * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und platzieren sie die Datei im /kathrein/ufs922 Ordner
186     Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
187     Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
188 * Schalten Sie das Gerät aus.
189 * USB Stick mit der Update-Datei anschließen
190 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Radio-Taste am Gerät solange gedrückt halten (ca. 5 Sekunden), bis „emergency boot“ erscheint,
191   anschließend beginnt die Installation. Erst danach die Taste loslassen
192     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
193 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
194[[br]]
195[[br]]
196[[br]]
197
198
199'''Mips Models'''
200----
201'''8.10 Atemio5000''' [=#point8.10] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
202----
203'' Wie installiere ich ein Atemio 5000 Update Image? ''
204 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.15 IRD Download Locations])
205 * Entpacken Sie die ZIP-Datei
206 * Kopieren Sie nun die Firmware-Datei auf einen in FAT32 formatierten USB-Stick und entpacken Sie diese direkt auf dem USB-STick.
207     Hinweis: Nach dem auspacken werden zwei Unterordner atemio/5x00 erstellt. Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
208     Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
209 * Schalten Sie das Gerät aus.
210 * USB Stick mit der Ausgepackten Firmware-Datei anschließen
211 * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...“ erscheint,
212   anschließend beginnt die Installation. Erst danach die Taste loslassen
213     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
214 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
215
216[[br]]
217----
218'''8.11 Atemio5200''' [=#point8.11] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
219----
220'' Wie installiere ich ein Atemio 5200 Update Image? ''
221 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.15 IRD Download Locations])
222 * Entpacken Sie die ZIP-Datei
223 * Kopieren Sie nun die Firmware-Datei auf einen in FAT32 formatierten USB-Stick und entpacken Sie diese direkt auf dem USB-STick.
224     Hinweis: Nach dem auspacken werden zwei Unterordner atemio/5x00 erstellt. Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
225     Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
226 * Schalten Sie das Gerät aus.
227 * USB Stick mit der Ausgepackten Firmware-Datei anschließen
228 * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...“ erscheint,
229   anschließend beginnt die Installation. Erst danach die Taste loslassen
230     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
231 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
232[[br]]
233[[br]]
234[[br]]
235
236
237'''Aditional Info'''
238----
239'''8.12 Instalation on other Fortis Recievers'''  [=#point8.12]([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
240----
241'''Instalation Notes:'''
242
243''If you wish to try or install titan you need to install Atemio/ Atevio factory loader, because of secutity installed in the bootloader one can not flash a loader from another fortis Reciever it will be rejected.''
244
245''If you wish to install TitanNit the loader version must be 1.54 or above titan versions above 1.32 require you to install the new Iboot loader.''
246
247''There is a few ways around this as explained below:''
248 
249[[br]]
250
251'''AAF Recovery Tool (ART) method'''
252
253 * Install the AAF Recovery Tool (ART) and set up a connection to your Reciever
254 * Set the IP address and subnet mask of your uboot enviroment.
255 * Reboot the decoder and reconect to make changes.
256 * Install the factory loader and reboot.
257 * You will have the factory loader version 1.21 you must now update to 1.54 to be compatable with TitanNit
258
259 * Visit the Atemio homepage or the AAF digital forum and download the latest Atevio/ Atemio loaader (1.54).
260 * Extract the zip file
261  * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
262     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
263     " HP USB Disk Storage Format Tool" (freeware program).
264     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
265 * Turn off the Receiver and disconnect all USB devices.
266 * Connect the USB stick with the IRD file to your Receiver
267 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
268   and the installation begins. Only then release the button
269     Note: If installation does not start , use a different USB stick.
270 * After successfully installing the receiver will reboot and the installed Loader should start-up
271
272''You may now install TitanNit''
273[[br]]
274
275
276[[br]]
277
278'''Cross Flash Method'''
279
280''This method explains how to install the HDF bootloader flash plugin to your fortis decoder and flash an Atemio/ Atevio compatable boot loader from the plugin menu.''
281
282* Download the HDF Boot loader flash plugin from the [http://www.aaf-digital.info/forum/forum.php AAF Digital] forum.
283 * Extract the zip file
284 * Now copy the unzipped Plugin folder to a formatted FAT32 USB stick.
285     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
286     " HP USB Disk Storage Format Tool" (freeware program).
287     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
288 * go to the plugins section in your decoder and install the plugin and then start it.
289 * type in the password contained in the zip file and follow the onscreen propmts.
290 * After successfully installing the receiver will reboot and the installed bootLoader should start-up.
291
292''You may now install TitanNit''
293
294[[br]]
295
296'''Reseller Changer Tool Method'''
297
298''This method explains how to change the Reseler ID of an Atemio/ Atevio compatable bootloader and flash it to any compatable Fortis receiver from the plugin menu.''
299
300
301* Visit the Atemio homepage or the AAF digital forum and download the latest Atevio/ Atemio loader.
302 * Extract the zip file
303 * use the reseller ID changer tool and change the IRD to that of your reseller ID.
304 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
305     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
306     " HP USB Disk Storage Format Tool" (freeware program).
307     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
308 * Turn off the Receiver and disconnect all USB devices.
309 * Connect the USB stick with the IRD file to your Receiver
310 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
311   and the installation begins. Only then release the button
312     Note: If installation does not start , use a different USB stick.
313 * After successfully installing the receiver will reboot and the installed image should start-up
314
315
316with this method it will require you to change the reseller ID also of the titan ird file IRD to be able to install TitanNit.
317
318
319'''Be aware that this process if it goes wrong or the power goes off during flashing the loader there is no recovery method and don't blame us, compatibility is not guranteed with other decoders but you may find a list of compatable recievers in the [wiki:Supported-Recievers-en#point7 Supported Receivers] section.'''
320[[br]]
321
322----
323'''8.13 Uninstalling Titan''' [=#point8.13] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
324----
325If you have an Atemio/Atevio or ufs Receiver all you have to do is install your original ird file as explained above and no bootloader changes are nessesary.
326
327Uninstalling titan and switching back to the original reseller loader cant be done (easily) for other fortis decoders but there is one simple alternative method outlined below.
328
329
330'''Uninstalling TitanNit on non Atemio/ Atevio Reciever and Restore Reseller ID with Maxiuboot'''
331
332If you have iboot installed then you must install a version of TitanNit below 1.32 before using this method.
333
334This will install the factory atemio loader that is compatible with the AAF Recovert Tool (ART) to be able to install the Maxiuboot Loader.
335
336But for this to work make sure the setting Allow __"Iboot Update"__ is enabled in [wiki:Remote-Device-Control-en#point4.6 Iboot].
337
338once this is done you may start up ART from your pc and install Maxiuboot.
339
340
341Once it is installed you then can set up your bootargs and change your Reseller ID back to its factory setting, This is out side the scope of this wiki please read the manual included with the AAF Recovery Tool (ART) for more information on this process.
342
343[[br]]
344----   
345'''8.14 Update TitanNit''' [=#point8.14] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) 
346----
347There are two ways to update your TitanNit version and there are merits to both methods :
348
349IRD offline method see [#point8 Installation / Recovery Inhaltsverzeichnis] and select your Reciever model to show information on how to update titan using an IRD titannit image.
350[[br]]
351''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
352Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
353
354Image Online Method see [wiki:System-Update#point3.5.7 System aktualisieren] for information on how preform an online update.
355[[br]]
356''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
357
358[[br]]
359----   
360'''8.15 IRD Download Locations''' [=#point8.15] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) 
361---- 
362* [wiki:Manufactures#point13 13 Hersteller] - [http://atemio.de/index.php/software-updates Stable Images][[br]] 
363* [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
364[[br]]
365
366 
Note: See TracBrowser for help on using the repository browser.