source: wiki/pages/de/Remote-Device-Control @ 29085

Last change on this file since 29085 was 27482, checked in by aafsvn, 10 years ago

[titan] autoupdate wiki files

File size: 20.7 KB
Line 
1----
2'''4 Fernbedienung / Gerät Bedienung''' [=#point4] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
3----
4== Fernbedienung / Gerät Bedienung ==
5
6Dieser Abschnitt enthält Informationen über die Bedienung Ihres Receivers und die Funktionen der unterschiedlichen Fernbedienungen und Tasten direkt am Gerät
7
8 * ([wiki:Remote-Device-Control#point4.1 Fernbedienungen])
9 * ([wiki:Remote-Device-Control#point4.2 Geräte Bedienung])
10 * ([wiki:Remote-Device-Control#point4.3 Web Interface])
11 * ([wiki:Remote-Device-Control#point4.4 Telnet Control])
12 * ([wiki:Remote-Device-Control#point4.5 Rgui])
13 * ([wiki:Remote-Device-Control#point4.6 Bootloader])
14 * ([wiki:Remote-Device-Control#point4.7 TitanNit Web-IF (Htmlapi)])
15 * ([wiki:Remote-Device-Control#point4.8 FTP (File Transfer Protocol)])
16 * ([wiki:Remote-Device-Control#point4.8 autostart scripting (usercmd)])
17
18[[br]]
19[[br]]
20
21
22----
23'''4.1 Fernbedienungen''' [=#point4.1] ([#point4 Seitenanfang])
24
25----
26
27 * ([#point104.10.1 RC Atevio700])
28 * ([#point104.10.2 RC Atevio7000, Atevio7500, Atemio7600])
29 * ([#point104.10.3 RC Atemio500, Atemio510])
30 * ([#point104.10.4 RC Atemio520])
31 * ([#point104.10.5 RC Atemio520-V2])
32 * ([#point104.10.6 RC Atemio530])
33
34 * ([#point104.10.7 RC UFS910])
35 * ([#point104.10.8 RC UFS912])
36 * ([#point104.10.9 RC UFS922])
37
38[[BR]]
39[[BR]]
40[[BR]]
41
42
43
44
45'''4.1.1 Fernbedienung Atevio700''' [=#point4.1.1] ([#point4.1 back])
46[[BR]]
47{{{#!th rowspan=0 align=left style="border: none"
48[[Image(source:/titan/web/img/rc.atevio700.png)]][[br]]
49}}}
50|----------------
51{{{#!td style="border: none"
52 
53'''TEXT RC Atevio 700'''
54
55}}}
56
57[[br]]
58[[br]]
59[[br]]
60
61
62
63'''4.1.2 Fernbedienung Atevio7000, Atevio7500, Atemio7600''' [=#point4.1.2]  ([#point4.1 back])
64[[BR]]
65{{{#!th rowspan=0 align=left style="border: none"
66[[Image(source:/titan/web/img/rc.atevio7000.png)]][[br]]
67}}}
68|----------------
69{{{#!td style="border: none"
70 The section contains information on the functions and operation of your remote control unit.
71
72 '''Special Function Buttons operation during channel streaming'''
73
74 
75 ||'''Resolution:''' ||This Key Switches the videomode.||
76 ||'''V.Format:''' ||This Key Switches the Video format.||
77 ||'''Recall:''' ||This key can bring up the recent channel history so you can jump easilly between programs.||
78 ||'''Info:''' ||This Button displays the infobar.||
79 ||'''fav:''' ||This button brings up the favourite and Boquet lists to easilly select programs.||
80 ||'''Menu:''' ||This key opens the menu.||
81 ||'''Sleep:''' ||This Key can setup the sleep timer.||
82 ||'''Help:''' ||This key can display detailed information and help text's.||
83 ||'''Exit:''' ||This key exits menus and popups .||
84 ||'''text:''' ||This key shows the teletext display.||
85 ||'''Ok:''' ||This button confirms menu items and popups.||
86
87[[br]]
88
89'''Programming the universal remote to operate a supported TV'''
90
91This section explains how to automatically search and program your universal remote control to operate your tv
92
93NOTE: If no inputs for 10 seconds during Setting the TV RC code the setting mode is terminated.
94
95'''Automatic code search '''
96
97 * Press the TV / Atevio button on the remote (for at least 3 seconds) until the LED flashes twice.
98
99   Enter the code 001. The LED flashes twice to confirm the entry.
100
101 * Press and hold the "ON / OFF" button until the TV turns off.
102   
103   Note: The LED flashes every 1.5 seconds and sends a new TV power rc code.
104
105 * Release the button immediately then press the "OK" button to store the TV code.
106
107  (This can take up to 15 minutes to cycle all the tv's pre programmed in to the remote from the factory)
108
109   If you dont let go of the power key in time it will step to the next RC Power button code if this happens use the D-Pad down to rewind 5 codes to attempt to store the code again.
110
111 * To interrupt the search mode, Press the Exit button for 2 seconds and return to normal operation or wait for 10 seconds with no key presses.
112
113 * The remote control blinks 5 times at the end of the list if the tv has not turned off by the time your tv is not a supported model.
114
115'''Reset remote to factory programming'''
116
117This will reset the remote back to a factory non programmed state, this is nessesary if the remote  needs to be reprogrammed to operate a new TV and was previously programmed.
118
119 * Press the TV / Atevio button on the remote (for at least 3 seconds) until the LED flashes twice.
120
121 * Enter the code 000.
122 
123 * The LED flashes twice to confirm the entry. The remote control will now be reset (no code programmed)
124
125
126}}}
127
128[[br]]
129[[br]]
130[[br]]
131
132'''4.1.3 Fernbedienung Atemio 500 / Atemio 510''' [=#point4.1.3]  ([#point4.1 back])
133[[BR]]
134{{{#!th rowspan=0 align=left style="border: none"
135[[Image(source:/titan/web/img/rc.atemio510.png)]][[br]]
136}}}
137|----------------
138{{{#!td style="border: none"
139 
140'''TEXT RC Atemio 500/510'''
141
142}}}
143
144[[br]]
145[[br]]
146[[br]]
147
148'''4.1.4 Fernbedienung Atemio 520''' [=#point4.1.4]  ([#point4.1 back])
149[[BR]]
150{{{#!th rowspan=0 align=left style="border: none"
151[[Image(source:/titan/web/img/rc.atemio520.png)]][[br]]
152}}}
153|----------------
154{{{#!td style="border: none"
155 
156'''TEXT RC Atemio 520'''
157
158}}}
159
160[[br]]
161[[br]]
162[[br]]
163
164'''4.1.5 Fernbedienung Atemio 520 V2''' [=#point4.1.5]  ([#point4.1 back])
165[[BR]]
166{{{#!th rowspan=0 align=left style="border: none"
167[[Image(source:/titan/web/img/rc.atemio520-V2.png)]][[br]]
168}}}
169|----------------
170{{{#!td style="border: none"
171 
172'''TEXT RC Atemio 520-V2'''
173
174}}}
175
176[[br]]
177[[br]]
178[[br]]
179
180'''4.1.6 Fernbedienung Atemio 530''' [=#point4.1.6]  ([#point4.1 back])
181[[BR]]
182{{{#!th rowspan=0 align=left style="border: none"
183[[Image(source:/titan/web/img/rc.atemio530.png)]][[br]]
184}}}
185|----------------
186{{{#!td style="border: none"
187 
188'''TEXT RC Atemio 530'''
189
190}}}
191
192[[br]]
193[[br]]
194[[br]]
195
196
197'''4.1.7 Fernbedienung Kathrein UFS910''' [=#point4.1.7]  ([#point4.1 back])
198[[BR]]
199{{{#!th rowspan=0 align=left style="border: none"
200[[Image(source:/titan/web/img/rc.ufs910.png)]][[br]]
201}}}
202|----------------
203{{{#!td style="border: none"
204 
205'''TEXT RC UFS 910'''
206
207}}}
208
209[[br]]
210[[br]]
211[[br]]
212
213
214
215
216'''4.1.8 Fernbedienung Kathrein UFS912''' [=#point4.1.8]  ([#point4.1 back])
217[[BR]]
218{{{#!th rowspan=0 align=left style="border: none"
219[[Image(source:/titan/web/img/rc.ufs912.png)]][[br]]
220}}}
221|----------------
222{{{#!td style="border: none"
223 
224'''TEXT RC UFS912'''
225
226}}}
227
228[[br]]
229[[br]]
230[[br]]
231
232
233
234'''4.1.9 Fernbedienung Kathrein UFS922''' [=#point4.1.9]  ([#point4.1 back])
235[[BR]]
236{{{#!th rowspan=0 align=left style="border: none"
237[[Image(source:/titan/web/img/rc.ufs922.png)]][[br]]
238}}}
239|----------------
240{{{#!td style="border: none"
241 
242'''TEXT RC UFS922'''
243
244}}}
245
246[[br]]
247[[br]]
248[[br]]
249
250
251
252[[br]]
253----
254'''4.2 Gerät Bedienung''' [=#point4.2] ([#point4 Seitenanfang])
255----
256
257
258[[Image(source:/wiki/Wiki-Pictures/DE/On_Device_Control.jpg)]][[br]]
259
260The section contains information on the functions and operation of your Receiver from the onboard buttons.
261Please note: the control is very limited from the on device controls but simple menu and tv control's can be made:
262
263'''Device Controll keys'''
264
265 
266 ||'''Power''' ||This Key Switches to the power menu or shuts down depending on the "power action" see ([#point3.60.6 Adjust]) for more info. ||
267 ||'''Menu:''' ||This Key brongs up the on screen display/ menu. ||
268 ||'''Ok:''' ||This key accept on screen prompts. ||
269 ||'''D-pad:''' ||These buttons can control the volume and TV channel when on the TV display it can also be used to navigate the menu and on screen prompts. ||
270
271----
272'''4.3 Web Interface''' [=#point4.3] ([#point4 Seitenanfang])
273----
274
275[[Image(source:/wiki/Wiki-Pictures/DE/Web_Control.jpg)]][[br]]
276
277The section contains information on the functions and operation of your Receiver from the web interface over LWAN, LAN or wifi.
278
279[[br]]
280
281----
282''' Channel list''' 
283----
284
285[[br]]
286
287 ||'''All''' ||Show All Channels from all Boquets .||
288 ||'''Sat''' ||Sort channels By Satellite.||
289 ||'''provider:''' ||Sort channels By provider.||
290 ||'''A-Z:''' ||Sort channels Alphabetically.||
291 ||'''Boquets:''' ||Sort channels By Boquet.||
292
293
294[[br]]
295----
296'''Box Control'''
297
298----
299
300[[br]]
301 
302 ||'''Power Control:''' ||This brings up the links to control the power settings (shutdown, restart, etc....)||
303 ||'''Message:''' ||Send a message to the display of the tv.||
304 ||'''Remote:''' ||Bring up the remote on the web page for control of the decoder.||
305 ||'''Screenshot OSD:''' ||Take a screen shot of the OSD.||
306 ||'''Play Movie (URL:''' ||Play a movie from the selected url.||
307
308[[br]]
309----
310'''Movies'''
311
312----
313
314[[br]]
315
316This will bring up a list of the movie directory on the reciever please see ([#point3.120.5 Web Controls]) for more information
317
318'''Timer''' 
319 
320 ||'''Timer List:''' ||Show a list of the timer Recordings.||
321 ||'''Timer Archive:''' ||Show a list of all the completed timer recordings.||
322 ||'''Add Timer:''' ||Add a timer recording.||
323
324----
325'''Web Controls'''
326
327----
328
329[[br]]
330
331
332'''Filelist Display Web Buttons'''
333
334This section explains the functions and discriptions of the icons displayed on the web page along side the file list display.
335
336 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button plays the selected program (web Stream) ||
337 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button plays the selected program (Stream) ||
338 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button deletes the selected program ||
339 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button downloads the selected program ||
340 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button displays the (EPG) ||
341 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button shows the selected channel is audio only (radio)||
342 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button shows the selected channel is audio and video (TV)||
343 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button shows the selected channel is not available ||
344 
345
346'''Other Web Buttons'''
347
348This section explains the functions and discriptions icons displayed on the web page title area.
349
350 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button shows or hides the onscreen remote control ||
351 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button turns off the Reciever ||
352 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button restarts the Receiver ||
353 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button restarts the GUI ||
354 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button puts the receiver into standby ||
355 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button mute's the sound ||
356 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||These buttons select the volume 10 to 100% (left to right) ||
357 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button starts a Recording ||
358 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This button shows the signal info's ||
359 ||[[Image(source:/wiki/Wiki-Pictures/DE/tv.png)]] ||This box enables you to search the EPG type your test into the box and press enter. ||
360
361[[br]]
362----
363
364To open the web interface, use an Internet browser and enter the ip address of your decoder in the adress bar as follows: you may find your ip adress from the system information/network display.
365
366http:// IP.Adresse.des.Receivers    (zB. http://192.168.0.100)
367
368[[br]]
369
370
371----
372'''4.4 Telnet Control''' [=#point4.4] ([#point4 top of the page])
373----
374
375
376[[Image(source:/wiki/Wiki-Pictures/EN/Telnet_Control.jpg)]][[br]]
377
378The section contains information on the operation of your Receiver over a telnet session.
379
380'''Telnet Setup'''
381
382 * Eithernet Interface Telnet Setup
383
384  1 A Network connection must be active
385
386  2 Install the client found here: ([http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty]).
387
388  3 Find the IP address from the system info ([wiki:Network#point3.7.8.5 Network]) section
389
390  4 Insert the IP address info into the telnet client
391
392  5 Click connect.
393
394[[br]]
395 
396 * Serial Interface Telnet Setup
397
398  1 Connect a null modem cable between the Receiver and PC
399
400  2 Install the client found here: ([http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty])
401
402  3 Set up the serial port connection parameters
403
404  4 Click connect.
405
406After the above steps are completed you will now be presented with a console where you can login to your Receiver with a username and password.
407
408after entering your login information there are a few receiver specific functions that may be handy if you require information on basic telnet commands i suggest you have a look on [http://www.linux.org linux.org]
409
410'''Remote RC debugging'''
411{{{
412#!python
413killall -9 evremote2
414evremote2
415}}}
416[[br]]
417
418'''Start FTDI driver'''
419{{{
420#!python
421mknod / dev.static/ttyUSB0 c 188 0"
422}}}
423[[br]]
424
425'''Test FTDI driver commands'''
426{{{
427#!python
428ls-al / dev/ttyUSB0
429}}}
430[[br]]
431
432{{{
433#!python
434cat /proc/bus/usb/devices
435}}}
436[[br]]
437
438{{{
439#!python
440lsmod | grep usbserial
441}}}
442[[br]]
443
444'''Take a screen shot'''
445{{{
446#!python
447/sbin/grab -j 100 -r 960 /tmp/000.jpg
448}}}
449
450----
451'''4.5 Rgui'''  [=#point4.5]  ([#point4 Seitenanfang])
452----
453[[br]]
454
455[[Image(source:/wiki/Wiki-Pictures/DE/Mainmenu.jpg)]][[br]]
456
457
458Rgui ist ein TitanNit Plugin mit dem man von einer Box aus andere Boxen bedienen kann. [[br]]
459Dabei wird die Gui komplett übertragen, ohne das TV-Bild des entfernten Receivers wiederzugeben.[[br]]
460Damit kann man also nur die anderen Receiver von aussen bedienen, aber nicht das Tv Signal weiter streamen.
461
462[[br]]
463
464
465
466 
467
468----
469'''4.6 Bootloader''' [=#point4.6] ([#point4 Seitenanfang])
470----
471[[br]]
472
473[[Image(source:/wiki/Wiki-Pictures/DE/On_Device_Control.jpg)]][[br]]
474
475
476
477== Aufgaben des Boot Loaders: ==
478
479* Erkennung der Hardware
480* Starten des Image
481
482==  iboot ist ein Boot Loader ==
483geschrieben von Solala.
484
485== I-boot ab 1.32 ==
486
487
488'''I-boot starten'''
489
490Receiver stromlos machen beim Einschalten auf der Fernbedienung "Menu" drücken.
491I-boot startet bis Menu-Flash
492
493
494
495'''Experten Modus einschalten'''
496
497Receiver stromlos machen beim Einschalten auf der Fernbedienung "Menu" drücken.
498I-boot startet bis Menu-Flash
499
500nun mit Steuerkreuz links/rechts auf '''"SETTINGS"''' gehen und mit rauf/runter auf '''"set OSD color"''' dann auf '''OK'''
501mit links/rechts wechselt man durch die Farben
502mit rauf/runter stellt man die einzeln Farben um
503
504bei der '''AM 510/AM520''' ist der Code
505
506Red = 11
507
508Green = 47
509
510Blue =11
511
512bei der '''AM 7500/7600''' ist der Code
513
514Red = 7
515
516Green = 10
517
518Blue =5
519
520
521dann mit 2x '''"Exit"''' raus gehen, bis I-boot '''"Flash"''' anzeigt und sofort wieder '''"Menu"''' drücken.
522auf dem Tv-Bildschirm sollte nun stehen:
523
524''' !!! YOU ACTIVATED EXPERTENMODE !!! ''' - du hast den Experten Modus aktiviert
525
526''' !!!NO WARRANTY ----- USE AT YOUR OWN RISC !!! ''' Keine Garantie - benutzen auf eigene Gefahr
527
528if you dont agree : execute '''"clean environment sector"''' in MENU-FLASH
529wenn Sie die Garantie nicht verlieren willst, mußt du '''"clean environment sector"''' in MENU-FLASH ausführen
530
531
532==4.6.1 Hauptkategorien == [=#point4.6.1]
533
534[#point4.6.2 ''MENU-FLASH'']
535
536[#point4.6.3 ''SETTINGS'']
537
538[#point4.6.4 ''MENU_MISC'']
539
540[#point4.6.5 ''MENU-NET'']
541
542
543== Unterkategorien ==
544
545
546'''4.6.2 MENU-FLASH''' [=#point4.6.2]  ([#point4.6 zurück])
547
548* ''' 1.USB IRDupdt Image ''' flash per Usb-Stick oder Usb-HDD von sda1 (standard) (abhängig von SETTINGS>Select USB/SATA dev 1-4)
549
550* '''2.list USBirds''' wenn mehrere ird Image's auf dem Usb-Stick liegen, kann man sich diese anzeigen lassen und dann das Richtige flashen
551
552* '''3.clean environment sector''' setzt die Bootargs zurück und bringt I-boot in den Standard Modus, wenn man keinen Experten Modus nutzen will wegen der Garantie
553
554* '''4. clean Flash ! Include swap''' löscht das komplette Image, inklusive den Swap-Bereich, also alle Einstellungen, Plugins, Backups und so weiter.
555
556* '''5. SATA IRDupdt''' hiermit kann man ein ird Image von einer internen Platte oder einer extern SATA/e-SATA Platte flashen
557
558* '''6. list SATAirds''' wenn mehre ird Image's auf dem SATA/e-SATA liegen, kann man sich diese anzeigen lassen und dann das Richtige flashen
559
560* '''7. allow I-boot update''' Entwickler Option damit man auch nur das image flashen kann und der auf der Box befindliche Bootloader nicht überschrieben wird
561     ''Einstellungsoptionen:''
562       ''0'' - i-boot darf nicht überschrieben werden
563
564       ''1'' - i-boot darf überschrieben werden (Standardeinstellung)
565
566[[br]]
567
568----
569'''4.6.3 Menu Settings ''' [=#point4.6.3] ([#point4.6 zurück])
570
571
572 ||'''Turbosw'''||Select overclocking speeds available settings are (0)265, (1)265, (2)297, (3)297, (4)333, (5)333, (6)364, (7)364. ||
573 ||'''Timeout'''||Delay befor selecting the default boot option. ||
574 ||'''USB Sleep'''||???. ||
575 ||'''Scroll Speed'''||How fast the VFDisplay module moves. ||
576
577[[br]]
578
579----
580'''4.6.4 Menu Misc''' [=#point4.6.4]  ([#point4.6 zurück])
581
582
583 ||'''Disclaimer''' ||Shows the info on the bootloader. ||
584 ||'''Serial Console''' ||Enables Bootloader serial debugging. ||
585 ||'''Reset Board'''||Resets the Receiver and restarts boot process. ||
586
587
588
589[[br]]
590
591----
592'''4.6.5 Menu Net ''' [=#point4.6.5]  ([#point4.6 zurück])
593(not present in av700/7000)
594
595[[br]]
596
597
598
599----
600'''4.7 TitanNit Web-IF (Htmlapi)''' [=#point4.7] ([#point4 top of the page])
601----
602
603[[Image(source:/wiki/Wiki-Pictures/DE/Web_Control.jpg)]][[br]]
604
605The section contains information on the operation and control of your decoder from the Htmlapi.
606
607[[br]]
608
609TitanNit provides its own Htmlapi that is freely distributed so that other developers may interface with a reciever running titan.
610
611
612The Htmlapi is very simple to implement an example message structure is as follows:
613
614 * query?param&param&... for html output
615
616 * queryraw?param&param&... for raw-struct output
617
618
619For example if you would wish to send a RC remote keypress of the "Mute" key the message format would be as follows:
620
621 * __query?sendrc&rcmute__
622
623
624if you would like to retrieve a list of all the current satelites the format would be as follows:
625
626 * __queryraw?getsat__
627
628
629the output message back from the Reciever would be as follows:
630
631 * __satname#orbitalpos__
632and an example raw output would be:
633
634> {{{Optus_d2#160}}}[[br]]
635> {{{Optus_d1#166}}}[[br]]
636> {{{Intelsat_IS19#156}}}[[br]]
637
638''more information on the protocol and the query strings can be found here [http://sbnc.dyndns.tv/trac/browser/titan/doc/htmlapi.txt htmlapi.txt]''
639
640[[br]]
641
642----
643'''4.8 FTP (File Transfer Protocol)''' [=#point4.8] ([#point4 top of the page])
644----
645
646[[Image(source:/wiki/Wiki-Pictures/EN/Filezilla.jpg)]][[br]]
647
648The section contains information on how to setup a FTP connection to your TitanNit Receiver.
649
650[[br]]
651
652Titan Has an inbuilt FTP Server that is able to be used to transfer files to and from your Receiver.
653
654To connect to your receiver you can connect via your browser in windows or use a dedicated FTP program as with many linux programs the default password and user name is "root" and port 21 is the default FTP interface port.
655
656You connect to your receiver via internet explorer on your pc to do this you need to find the IP address fo the decoder from the system information menu [wiki:System-info-Network#point3.7.8.4 Network Information] of your receiver and type it into the address bas as follows:
657
658{{{ftp://Username:Password@Ip_Address:Port_Number}}}
659
660{{{ftp://root:root@192.168.0.1:21}}}
661
662if you Wish to use a dedicated FTP program please read the documentation supplied with your program for information on setup of the FTP connection, Below is a screen shot of Filezilla a popular Free FTP client Program with a sample loggin details of my Receiver.
663
664[[Image(source:/wiki/Wiki-Pictures/EN/FileZilla-Setup.jpg)]][[br]]
665
666----
667 '''4.9 autostart scripting (usercmd)''' [=#point4.9] ([#point4 top of the page])
668----
669
670If you wish to run a script on startup of the Receiver you can install commands in the usercmd.sh to be proformed at the startup of the receiver.
671
672a sample of the usercmd.sh is below:
673
674{{{
675#!python
676#! / bin / sh
677 # Start the user commands here
678echo " [ usercmd.sh ] start"
679 # insert code here
680 exit
681}}}
682
683the {{{__"# insert code here"__}}} section must be replaced by your commands.
684
685If you place the following code in to the usercmd.sh it will delete every time shift file on the internal hdd on startup of the receiver:
686
687{{{
688#!python
689rm -f /media/hdd/movie/timeshift*.ts
690}}}
691
692If you place the following code in to the usergmd.sh it will autostart the FTDI driver.
693{{{
694#!python
695mknod / dev.static/ttyUSB0 c 188 0"
696}}}
697[[br]]
698
699
700the full path to the file is:
701__"/mnt/config/usercmd.sh"__
702
703
704
705
706
707
708
709
710
711
Note: See TracBrowser for help on using the repository browser.