source: wiki/pages/en/Installation-Recovery-Mips-Atemio @ 37372

Last change on this file since 37372 was 37372, checked in by aafsvn, 4 years ago

[titan] autoupdate wiki files

File size: 6.4 KB
Line 
1----
2'''8.061 Mips Atemio''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
3----
4
5manufacturer blurb.....
6
7
8
9
10
11----
12'''8.061 Atemio-Nemesis''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
13----
14'' How do I install an Atemio 5000 Update UBI image? ''
15 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
16 * Extract the zip file
17 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
18    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
19     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
20 * Turn off the Receiver and disconnect all USB devices.
21 * Connect the USB stick with the IRD file to your Receiver
22 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
23   then the installation begins, Only then release the button.
24    Note: If installation does not start , use a different USB stick.
25 * After successfully installing the receiver will reboot and the installed image should start-up
26[[br]]
27[#point8 Top of Page]
28[[br]]
29----
30'''8.062 Atemio5200''' [=#point8.062] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
31----
32'' How do I install an Atemio 5200 Update UBI image? ''
33 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
34 * Extract the zip file
35 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
36    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
37     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
38 * Turn off the Receiver and disconnect all USB devices.
39 * Connect the USB stick with the IRD file to your Receiver
40 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
41   then the installation begins, Only then release the button.
42    Note: If installation does not start , use a different USB stick.
43 * After successfully installing the receiver will reboot and the installed image should start-up
44[[br]]
45[#point8 Top of Page]
46[[br]]
47----
48'''8.063 Atemio6000''' [=#point8.063] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
49----
50'' How do I install an Atemio 6000 Update UBI image? ''
51 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
52 * Extract the zip file
53 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
54    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
55     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
56 * Turn off the Receiver and disconnect all USB devices.
57 * Connect the USB stick with the IRD file to your Receiver
58 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
59   then the installation begins, Only then release the button.
60    Note: If installation does not start , use a different USB stick.
61 * After successfully installing the receiver will reboot and the installed image should start-up
62[[br]]
63[#point8 Top of Page]
64[[br]]
65----
66'''8.064 Atemio6100''' [=#point8.064] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
67----
68'' How do I install an Atemio 6100 Update UBI image? ''
69 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
70 * Extract the zip file
71 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
72    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
73     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
74 * Turn off the Receiver and disconnect all USB devices.
75 * Connect the USB stick with the IRD file to your Receiver
76 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
77   then the installation begins, Only then release the button.
78    Note: If installation does not start , use a different USB stick.
79 * After successfully installing the receiver will reboot and the installed image should start-up
80[[br]]
81[#point8 Top of Page]
82[[br]]
83----
84'''8.065 Atemio6200''' [=#point8.065] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
85----
86'' How do I install an Atemio 6200 Update UBI image? ''
87 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
88 * Extract the zip file
89 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
90    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
91     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
92 * Turn off the Receiver and disconnect all USB devices.
93 * Connect the USB stick with the IRD file to your Receiver
94 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
95   then the installation begins, Only then release the button.
96    Note: If installation does not start , use a different USB stick.
97 * After successfully installing the receiver will reboot and the installed image should start-up
98[[br]]
99[#point8 Top of Page]
100[[br]]
Note: See TracBrowser for help on using the repository browser.