1 | [[TranslatedPages]]
|
---|
2 | ----
|
---|
3 | '''8.061 Mips Atemio''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
4 | ----
|
---|
5 |
|
---|
6 | manufacturer blurb.....
|
---|
7 |
|
---|
8 |
|
---|
9 |
|
---|
10 |
|
---|
11 |
|
---|
12 | ----
|
---|
13 | '''8.061 Atemio-Nemesis''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
14 | ----
|
---|
15 | '' How do I install an Atemio 5000 Update UBI image? ''
|
---|
16 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
17 | * Extract the zip file
|
---|
18 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
19 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
20 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
21 | * Turn off the Receiver and disconnect all USB devices.
|
---|
22 | * Connect the USB stick with the IRD file to your Receiver
|
---|
23 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
24 | then the installation begins, Only then release the button.
|
---|
25 | Note: If installation does not start , use a different USB stick.
|
---|
26 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
27 | [[br]]
|
---|
28 | [#point8 Top of Page]
|
---|
29 | [[br]]
|
---|
30 | ----
|
---|
31 | '''8.062 Atemio5200''' [=#point8.062] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
32 | ----
|
---|
33 | '' How do I install an Atemio 5200 Update UBI image? ''
|
---|
34 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
35 | * Extract the zip file
|
---|
36 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
37 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
38 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
39 | * Turn off the Receiver and disconnect all USB devices.
|
---|
40 | * Connect the USB stick with the IRD file to your Receiver
|
---|
41 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
42 | then the installation begins, Only then release the button.
|
---|
43 | Note: If installation does not start , use a different USB stick.
|
---|
44 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
45 | [[br]]
|
---|
46 | [#point8 Top of Page]
|
---|
47 | [[br]]
|
---|
48 | ----
|
---|
49 | '''8.063 Atemio6000''' [=#point8.063] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
50 | ----
|
---|
51 | '' How do I install an Atemio 6000 Update UBI image? ''
|
---|
52 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
53 | * Extract the zip file
|
---|
54 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
55 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
56 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
57 | * Turn off the Receiver and disconnect all USB devices.
|
---|
58 | * Connect the USB stick with the IRD file to your Receiver
|
---|
59 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
60 | then the installation begins, Only then release the button.
|
---|
61 | Note: If installation does not start , use a different USB stick.
|
---|
62 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
63 | [[br]]
|
---|
64 | [#point8 Top of Page]
|
---|
65 | [[br]]
|
---|
66 | ----
|
---|
67 | '''8.064 Atemio6100''' [=#point8.064] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
68 | ----
|
---|
69 | '' How do I install an Atemio 6100 Update UBI image? ''
|
---|
70 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
71 | * Extract the zip file
|
---|
72 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
73 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
74 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
75 | * Turn off the Receiver and disconnect all USB devices.
|
---|
76 | * Connect the USB stick with the IRD file to your Receiver
|
---|
77 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
78 | then the installation begins, Only then release the button.
|
---|
79 | Note: If installation does not start , use a different USB stick.
|
---|
80 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
81 | [[br]]
|
---|
82 | [#point8 Top of Page]
|
---|
83 | [[br]]
|
---|
84 | ----
|
---|
85 | '''8.065 Atemio6200''' [=#point8.065] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
86 | ----
|
---|
87 | '' How do I install an Atemio 6200 Update UBI image? ''
|
---|
88 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
89 | * Extract the zip file
|
---|
90 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
91 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
92 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
93 | * Turn off the Receiver and disconnect all USB devices.
|
---|
94 | * Connect the USB stick with the IRD file to your Receiver
|
---|
95 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
96 | then the installation begins, Only then release the button.
|
---|
97 | Note: If installation does not start , use a different USB stick.
|
---|
98 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
99 | [[br]]
|
---|
100 | [#point8 Top of Page]
|
---|
101 | [[br]]
|
---|