source: wiki/pages/en/Installation-Recovery-Mips-Golden-Interstar @ 37371

Last change on this file since 37371 was 37371, checked in by professor_jonny, 4 years ago

progress update for outdated wiki.
update translated pages? macro in all wiki pages.
update wiki to new code for all languages.
update pictures for all languages with place holders.
remove useless pages and fix missing pages and incorrectly named pages.
get ready to replace pictures and wiki paths for languages with new code.

File size: 2.5 KB
Line 
1[[TranslatedPages]]
2----
3'''8.080 Goldern interstar Xpeedlx1/2''' [=#point8.080] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
4----
5
6manufacturer blurb
7
8
9
10----
11'''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
12----
13''How do I install a Xpeedlx1/2 update image? ''
14 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
15 * Extract the zip file
16 * Now copy the unzipped firmware folder "xpeedlx3"  to a formatted FAT32 USB stick.
17    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
18 * Turn off the Receiver and disconnect all USB devices.
19 * Connect the USB stick with the update image file
20 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
21
22Note: If installation does not start, use a different USB stick.
23•After successfully installing the receiver will reboot and the installed image should start-up
24[[br]]
25[#point8 Top of Page]
26[[br]]
27----
28'''8.082 goldern interstar Xpeedlx3''' [=#point8.082] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
29----
30''How do I install a Xpeedlx3 update image? ''
31 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
32 * Extract the zip file
33 * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.
34    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
35 * Turn off the Receiver and disconnect all USB devices.
36 * Connect the USB stick with the update image file
37 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
38
39Note: If installation does not start, use a different USB stick.
40•After successfully installing the receiver will reboot and the installed image should start-up
41[[br]]
42[#point8 Top of Page]
43[[br]]
Note: See TracBrowser for help on using the repository browser.