[37412] | 1 | [[TranslatedPages]]
|
---|
[37351] | 2 | ----
|
---|
| 3 | '''8.090 Miraclebox''' [=#point8.090] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 4 | ----
|
---|
| 5 |
|
---|
| 6 | manufacturer blurb......
|
---|
| 7 |
|
---|
| 8 |
|
---|
| 9 |
|
---|
| 10 |
|
---|
| 11 |
|
---|
| 12 | ----
|
---|
| 13 | '''8.091 Miraclebox Ultra''' [=#point8.091] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 14 | ----
|
---|
| 15 | '' How do I install an Miraclebox Ultra Update UBI image? ''
|
---|
| 16 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 17 | * Extract the zip file
|
---|
| 18 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 19 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 20 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 21 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 22 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 23 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
| 24 | then the installation begins, Only then release the button.
|
---|
| 25 | Note: If installation does not start , use a different USB stick.
|
---|
| 26 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 27 | [[br]]
|
---|
| 28 | [#point8 Top of Page]
|
---|
| 29 | [[br]]
|
---|
| 30 | ----
|
---|
| 31 | '''8.092 Miraclebox Mini''' [=#point8.092] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 32 | ----
|
---|
| 33 | '' How do I install an Miraclebox Mini Update UBI image? ''
|
---|
| 34 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 35 | * Extract the zip file
|
---|
| 36 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 37 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 38 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 39 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 40 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 41 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
| 42 | then the installation begins, Only then release the button.
|
---|
| 43 | Note: If installation does not start , use a different USB stick.
|
---|
| 44 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 45 | [[br]]
|
---|
| 46 | [#point8 Top of Page]
|
---|
| 47 | [[br]]
|
---|