source: wiki/pages/en/Installation-Recovery-Mips-Miraclebox @ 37372

Last change on this file since 37372 was 37372, checked in by aafsvn, 4 years ago

[titan] autoupdate wiki files

File size: 2.6 KB
Line 
1----
2'''8.090 Miraclebox''' [=#point8.090] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
3----
4
5manufacturer blurb......
6
7
8
9
10
11----
12'''8.091 Miraclebox Ultra''' [=#point8.091] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
13----
14'' How do I install an Miraclebox Ultra Update UBI image? ''
15 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
16 * Extract the zip file
17 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
18    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
19     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
20 * Turn off the Receiver and disconnect all USB devices.
21 * Connect the USB stick with the IRD file to your Receiver
22 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
23   then the installation begins, Only then release the button.
24    Note: If installation does not start , use a different USB stick.
25 * After successfully installing the receiver will reboot and the installed image should start-up
26[[br]]
27[#point8 Top of Page]
28[[br]]
29----
30'''8.092 Miraclebox Mini''' [=#point8.092] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
31----
32'' How do I install an Miraclebox Mini Update UBI image? ''
33 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
34 * Extract the zip file
35 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
36    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
37     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
38 * Turn off the Receiver and disconnect all USB devices.
39 * Connect the USB stick with the IRD file to your Receiver
40 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
41   then the installation begins, Only then release the button.
42    Note: If installation does not start , use a different USB stick.
43 * After successfully installing the receiver will reboot and the installed image should start-up
44[[br]]
45[#point8 Top of Page]
46[[br]]
Note: See TracBrowser for help on using the repository browser.