source: wiki/pages/en/Installation-Recovery-Mips-Sezam @ 37407

Last change on this file since 37407 was 37407, checked in by aafsvn, 4 years ago

[titan] autoupdate wiki files

File size: 2.4 KB
Line 
1----
2'''8.100 Sezam-Marvel''' [=#point8.100] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
3----
4
5manufacturer blurb....
6
7
8
9
10
11----
12'''8.101 Sezam-Marvel''' [=#point8.101] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
13----
14''How do I install a Sezam-Marvel  update image? ''
15 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
16 * Extract the zip file
17 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
18    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
19 * Turn off the Receiver and disconnect all USB devices.
20 * Connect the USB stick with the update image file
21 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
22
23Note: If installation does not start, use a different USB stick.
24•After successfully installing the receiver will reboot and the installed image should start-up
25[[br]]
26[#point8 Top of Page]
27[[br]]
28----
29'''8.102 Sezam-1000HD''' [=#point8.102] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
30----
31''How do I install a Sezam-1000HD  update image? ''
32 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
33 * Extract the zip file
34 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
35    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
36 * Turn off the Receiver and disconnect all USB devices.
37 * Connect the USB stick with the update image file
38 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
39
40Note: If installation does not start, use a different USB stick.
41•After successfully installing the receiver will reboot and the installed image should start-up
42[[br]]
43[#point8 Top of Page]
44[[br]]
Note: See TracBrowser for help on using the repository browser.