[37412] | 1 | [[TranslatedPages]]
|
---|
[37351] | 2 | ----
|
---|
| 3 | '''SH4 Atemio (Atevio)'''[=#point8.00]
|
---|
| 4 | ----
|
---|
| 5 |
|
---|
| 6 | The SH4 Atemio recievers are manufactured by Fortis who are a Korean manufacturer of satellite receivers all atemio (atevio) models are compatible with TitanNit.
|
---|
| 7 | as TitanNit was developed for these recievers no bootloader software ID changes are required to install TitanNit, some of these models cam factory supplied with TitanNit such as the atemio 530.
|
---|
| 8 |
|
---|
| 9 | '''SH4 Atemio Contents'''
|
---|
| 10 |
|
---|
| 11 | * [#point8.001 8.001 Atemio510]
|
---|
| 12 | * [#point8.002 8.002 Atemio520]
|
---|
| 13 | * [#point8.003 8.003 Atemio530]
|
---|
| 14 | * [#point8.004 8.004 Atemio7600]
|
---|
| 15 | * [#point8.005 8.005 Atevio700]
|
---|
| 16 | * [#point8.006 8.006 Atevio7000]
|
---|
| 17 |
|
---|
| 18 | '''Additional Info'''
|
---|
| 19 |
|
---|
| 20 | * [#point8.007 8.007 Uninstallation]
|
---|
| 21 | * [#point8.008 8.008 Update TitanNit]
|
---|
| 22 | * [#point8.009 8.009 IRD Download Location]
|
---|
| 23 |
|
---|
| 24 |
|
---|
| 25 |
|
---|
| 26 | ----
|
---|
| 27 | '''8.1 Atemio510 and Fortis HS-7810''' [=#point8.001] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 28 | ----
|
---|
| 29 | '' How do I install an Atemio 510 IRD image? ''
|
---|
| 30 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 31 | * Extract the zip file
|
---|
| 32 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 33 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the
|
---|
| 34 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 35 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 36 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 37 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 38 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
|
---|
| 39 | and the installation begins. Only then release the button
|
---|
| 40 | Note: If installation does not start , use a different USB stick.
|
---|
| 41 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 42 | [[br]]
|
---|
| 43 | '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
|
---|
| 44 | * [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6 iboot sh4 loader flashing and recovery ][[br]]
|
---|
| 45 | [#point8 Top of Page]
|
---|
| 46 | [[br]]
|
---|
| 47 | ----
|
---|
| 48 | '''8.2 Atemio520''' [=#point8.002] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 49 | ----
|
---|
| 50 | '' How do I install an Atemio 520 IRD image? ''
|
---|
| 51 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 52 | * Extract the zip file
|
---|
| 53 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 54 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the
|
---|
| 55 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 56 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 57 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 58 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 59 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
|
---|
| 60 | and the installation begins. Only then release the button
|
---|
| 61 | Note: If installation does not start , use a different USB stick.
|
---|
| 62 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 63 | [[br]]
|
---|
| 64 | '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
|
---|
| 65 | * [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6 iboot sh4 loader flashing and recovery ][[br]]
|
---|
| 66 | [#point8 Top of Page]
|
---|
| 67 | [[br]]
|
---|
| 68 | ----
|
---|
| 69 | '''8.3 Atemio530''' [=#point8.003] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 70 | ----
|
---|
| 71 | '' How do I install an Atemio 530 IRD image? ''
|
---|
| 72 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 73 | * Extract the zip file
|
---|
| 74 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 75 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the
|
---|
| 76 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 77 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 78 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 79 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 80 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
|
---|
| 81 | and the installation begins. Only then release the button
|
---|
| 82 | Note: If installation does not start , use a different USB stick.
|
---|
| 83 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 84 | [[br]]
|
---|
| 85 | [#point8 Top of Page]
|
---|
| 86 | [[br]]
|
---|
| 87 | ----
|
---|
| 88 | '''8.4 Atemio7600 and Fortis HX-8200''' [=#point8.004] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 89 | ----
|
---|
| 90 | '' How do I install an Atemio 7600 IRD image? ''
|
---|
| 91 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 92 | * Extract the zip file
|
---|
| 93 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 94 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the
|
---|
| 95 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 96 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 97 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 98 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 99 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
|
---|
| 100 | and the installation begins. Only then release the button
|
---|
| 101 | Note: If installation does not start , use a different USB stick.
|
---|
| 102 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 103 | [[br]]
|
---|
| 104 | '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
|
---|
| 105 | * [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6 iboot sh4 loader flashing and recovery ][[br]]
|
---|
| 106 | [#point8 Top of Page]
|
---|
| 107 | [[br]]
|
---|
| 108 | ----
|
---|
| 109 | '''8.5 Atevio700''' [=#point8.005] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 110 | ----
|
---|
| 111 | '' How do I install an Atemio 7600 IRD image? ''
|
---|
| 112 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 113 | * Extract the zip file
|
---|
| 114 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 115 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the
|
---|
| 116 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 117 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 118 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 119 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 120 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
|
---|
| 121 | and the installation begins. Only then release the button
|
---|
| 122 | Note: If installation does not start , use a different USB stick.
|
---|
| 123 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 124 | [[br]]
|
---|
| 125 | '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
|
---|
| 126 | * [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6 iboot sh4 loader flashing and recovery ][[br]]
|
---|
| 127 | [#point8 Top of Page]
|
---|
| 128 | [[br]]
|
---|
| 129 | ----
|
---|
| 130 | '''8.6 Atevio7000 and Fortis FS-9000/9200''' [=#point8.006] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 131 | ----
|
---|
| 132 | '' How do I install an Atemio 7000 IRD image? ''
|
---|
| 133 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 134 | * Extract the zip file
|
---|
| 135 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 136 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the
|
---|
| 137 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 138 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 139 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 140 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 141 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
|
---|
| 142 | and the installation begins. Only then release the button
|
---|
| 143 | Note: If installation does not start , use a different USB stick.
|
---|
| 144 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 145 | [[br]]
|
---|
| 146 | '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
|
---|
| 147 | * [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6 iboot sh4 loader flashing and recovery ][[br]]
|
---|
| 148 | [#point8 Top of Page]
|
---|
| 149 | [[br]]
|
---|
| 150 |
|
---|
| 151 | ----
|
---|
| 152 | '''8.007 Uninstalling Titan''' [=#point8.007] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 153 | ----
|
---|
| 154 | If you have an Atemio (Atevio) receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
|
---|
| 155 |
|
---|
| 156 |
|
---|
| 157 | [[br]]
|
---|
| 158 | [#point8 Top of Page]
|
---|
| 159 | [[br]]
|
---|
| 160 |
|
---|
| 161 | ----
|
---|
| 162 | '''8.008 Update TitanNit''' [=#point8.008] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
|
---|
| 163 | ----
|
---|
| 164 | There are two ways to update your TitanNit version and there are merits to both methods :
|
---|
| 165 |
|
---|
| 166 | IRD offline method see above [#point8.00 SH4 Atemio contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
|
---|
| 167 | [[br]]
|
---|
| 168 | ''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
|
---|
| 169 | Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
|
---|
| 170 |
|
---|
| 171 | Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
|
---|
| 172 | [[br]]
|
---|
| 173 | ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
|
---|
| 174 | [[br]]
|
---|
| 175 | [#point8 Top of Page]
|
---|
| 176 | [[br]]
|
---|
| 177 |
|
---|
| 178 | ----
|
---|
| 179 | '''8.009 IRD Download Locations''' [=#point8.009] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
|
---|
| 180 | ----
|
---|
| 181 | * [wiki:Manufactures#point13 13 Manufactures] - [http://atemio.de/index.php/software-updates Stable Images][[br]]
|
---|
| 182 | * [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]
|
---|
| 183 |
|
---|
| 184 | [[br]]
|
---|
| 185 | [#point8 Top of Page]
|
---|
| 186 | [[br]]
|
---|