source: wiki/pages/en/Installation-Recovery-SH4-Atemio @ 37372

Last change on this file since 37372 was 37372, checked in by aafsvn, 4 years ago

[titan] autoupdate wiki files

File size: 10.5 KB
Line 
1
2----
3'''SH4 Atemio (Atevio)'''[=#point8.00]
4----
5
6The SH4 Atemio recievers are manufactured by Fortis who are a Korean manufacturer of satellite receivers all atemio (atevio) models are compatible with TitanNit.
7as TitanNit was developed for these recievers no bootloader software ID changes are required to install TitanNit, some of these models cam factory supplied with TitanNit such as the atemio  530.
8
9'''SH4 Atemio Contents'''
10
11 * [#point8.001 8.001 Atemio510]
12 * [#point8.002 8.002 Atemio520]
13 * [#point8.003 8.003 Atemio530]
14 * [#point8.004 8.004 Atemio7600]
15 * [#point8.005 8.005 Atevio700]
16 * [#point8.006 8.006 Atevio7000]
17
18'''Additional Info'''
19
20 * [#point8.007 8.007 Uninstallation]
21 * [#point8.008 8.008 Update TitanNit]
22 * [#point8.009 8.009 IRD Download Location]
23
24
25
26----
27'''8.1 Atemio510 and Fortis HS-7810''' [=#point8.001] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
28----
29'' How do I install an Atemio 510 IRD image? ''
30 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
31 * Extract the zip file
32 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
33     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
34     " HP USB Disk Storage Format Tool" (freeware program).
35     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
36 * Turn off the Receiver and disconnect all USB devices.
37 * Connect the USB stick with the IRD file to your Receiver
38 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
39   and the installation begins. Only then release the button
40     Note: If installation does not start , use a different USB stick.
41 * After successfully installing the receiver will reboot and the installed image should start-up
42[[br]]
43  '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
44* [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6  iboot sh4 loader flashing and recovery ][[br]] 
45[#point8 Top of Page]
46[[br]]
47----
48'''8.2 Atemio520''' [=#point8.002] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
49----
50'' How do I install an Atemio 520 IRD image? ''
51 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
52 * Extract the zip file
53 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
54     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
55     " HP USB Disk Storage Format Tool" (freeware program).
56     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
57 * Turn off the Receiver and disconnect all USB devices.
58 * Connect the USB stick with the IRD file to your Receiver
59 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
60   and the installation begins. Only then release the button
61     Note: If installation does not start , use a different USB stick.
62 * After successfully installing the receiver will reboot and the installed image should start-up
63[[br]]
64  '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
65* [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6  iboot sh4 loader flashing and recovery ][[br]] 
66[#point8 Top of Page]
67[[br]]
68----
69'''8.3 Atemio530''' [=#point8.003] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
70----
71'' How do I install an Atemio 530 IRD image? ''
72 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
73 * Extract the zip file
74 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
75     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
76     " HP USB Disk Storage Format Tool" (freeware program).
77     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
78 * Turn off the Receiver and disconnect all USB devices.
79 * Connect the USB stick with the IRD file to your Receiver
80 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
81   and the installation begins. Only then release the button
82     Note: If installation does not start , use a different USB stick.
83 * After successfully installing the receiver will reboot and the installed image should start-up
84[[br]]
85[#point8 Top of Page]
86[[br]]
87----
88'''8.4 Atemio7600 and Fortis HX-8200''' [=#point8.004] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
89----
90'' How do I install an Atemio 7600 IRD image? ''
91 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
92 * Extract the zip file
93 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
94     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
95     " HP USB Disk Storage Format Tool" (freeware program).
96     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
97 * Turn off the Receiver and disconnect all USB devices.
98 * Connect the USB stick with the IRD file to your Receiver
99 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
100   and the installation begins. Only then release the button
101     Note: If installation does not start , use a different USB stick.
102 * After successfully installing the receiver will reboot and the installed image should start-up
103[[br]]
104  '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
105* [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6  iboot sh4 loader flashing and recovery ][[br]] 
106[#point8 Top of Page]
107[[br]]
108----
109'''8.5 Atevio700''' [=#point8.005] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
110----
111'' How do I install an Atemio 7600 IRD image? ''
112 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
113 * Extract the zip file
114 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
115     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
116     " HP USB Disk Storage Format Tool" (freeware program).
117     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
118 * Turn off the Receiver and disconnect all USB devices.
119 * Connect the USB stick with the IRD file to your Receiver
120 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
121   and the installation begins. Only then release the button
122     Note: If installation does not start , use a different USB stick.
123 * After successfully installing the receiver will reboot and the installed image should start-up
124[[br]]
125  '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
126* [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6  iboot sh4 loader flashing and recovery ][[br]] 
127[#point8 Top of Page]
128[[br]]
129----
130'''8.6 Atevio7000 and Fortis FS-9000/9200''' [=#point8.006] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
131----
132'' How do I install an Atemio 7000 IRD image? ''
133 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
134 * Extract the zip file
135 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
136     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
137     " HP USB Disk Storage Format Tool" (freeware program).
138     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
139 * Turn off the Receiver and disconnect all USB devices.
140 * Connect the USB stick with the IRD file to your Receiver
141 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
142   and the installation begins. Only then release the button
143     Note: If installation does not start , use a different USB stick.
144 * After successfully installing the receiver will reboot and the installed image should start-up
145[[br]]
146  '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
147* [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6  iboot sh4 loader flashing and recovery ][[br]] 
148[#point8 Top of Page]
149[[br]]
150
151----
152'''8.007 Uninstalling Titan''' [=#point8.007] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
153----
154If you have an Atemio (Atevio) receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
155
156
157[[br]]
158[#point8 Top of Page]
159[[br]]
160
161----   
162'''8.008 Update TitanNit''' [=#point8.008] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
163----
164There are two ways to update your TitanNit version and there are merits to both methods :
165
166IRD offline method see above [#point8.00 SH4 Atemio contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
167[[br]]
168''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
169Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
170
171Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
172[[br]]
173''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
174[[br]]
175[#point8 Top of Page]
176[[br]]
177
178----   
179'''8.009 IRD Download Locations''' [=#point8.009] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
180----
181* [wiki:Manufactures#point13 13 Manufactures] - [http://atemio.de/index.php/software-updates Stable Images][[br]] 
182* [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
183 
184[[br]] 
185[#point8 Top of Page] 
186[[br]]
Note: See TracBrowser for help on using the repository browser.