source: wiki/pages/en/Installation-Recovery-SH4-Katherin @ 37371

Last change on this file since 37371 was 37371, checked in by jonathan brophy, 8 years ago

progress update for outdated wiki.
update translated pages? macro in all wiki pages.
update wiki to new code for all languages.
update pictures for all languages with place holders.
remove useless pages and fix missing pages and incorrectly named pages.
get ready to replace pictures and wiki paths for languages with new code.

File size: 9.0 KB
Line 
1[[TranslatedPages]]
2----
3'''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
4----
5
6Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
7
8'''SH4 Fortis Contents'''
9
10 * [#point8.041 8.041 Kathrein Ufs910]
11 * [#point8.042 8.042 Kathrein Ufs912]
12 * [#point8.043 8.043 Kathrein Ufs913]
13 * [#point8.044 8.044 Kathrein Ufs922]
14 * [#point8.045 8.045 Kathrein Ufs960]
15
16'''Additional Info'''
17
18 * [#point8.046 8.06 Uninstallation]
19 * [#point8.047 8.07 Update TitanNit]
20 * [#point8.048 8.08 IRD Download Location]
21
22----
23'''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
24----
25'' How do I install a Kathrein UFS910 update image? ''
26 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
27 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
28 * Extract the zip file
29 * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick.
30     Note: The USB stick should not be formatted with windows, but a separate program, such as the
31     " HP USB Disk Storage Format Tool" (freeware program).
32     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
33 * Turn off the Receiver and disconnect all USB devices.
34 * Connect the USB stick with the img file to the front USB Port
35 * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds)
36   until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button-
37     Note: If installation does not start, use a different USB stick.
38 * After successfully installing the receiver will reboot and the installed image should start-up
39[[br]]
40[#point8 Top of Page]
41[[br]]
42----
43'''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
44----
45'' How do I install a Kathrein UFS912 update image? ''
46 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
47 * Extract the zip file
48 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ .
49     Note: The USB stick should not be formatted with windows, but a separate program, such as the
50     " HP USB Disk Storage Format Tool" (freeware program).
51     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
52 * Turn off the Receiver and disconnect all USB devices.
53 * Connect the USB stick with the img file
54 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
55   then the installation begins. Only after that message release the -TV/Radio button-
56     Note: If installation does not start, use a different USB stick.
57 * After successfully installing the receiver will reboot and the installed image should start-up
58[[br]]
59[#point8.1 Top of Page]
60[[br]]
61----
62'''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
63----
64'' How do I install a Kathrein UFS913 update image? ''
65 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
66 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
67 * Extract the zip file
68 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
69     Note: The USB stick should not be formatted with windows, but a separate program, such as the
70     " HP USB Disk Storage Format Tool" (freeware program).
71     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
72 * Turn off the Receiver and disconnect all USB devices.
73 * Connect the USB stick with the img file
74 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
75   then the installation begins. Only after that message release the -TV/Radio button-
76     Note: If installation does not start, use a different USB stick.
77 * After successfully installing the receiver will reboot and the installed image should start-up
78[[br]]
79[#point8.1 Top of Page]
80[[br]]
81----
82'''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
83----
84'' How do I install a Kathrein UFS922 update image? ''
85 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
86 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
87 * Extract the zip file
88 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
89     Note: The USB stick should not be formatted with windows, but a separate program, such as the
90     " HP USB Disk Storage Format Tool" (freeware program).
91     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
92 * Turn off the Receiver and disconnect all USB devices.
93 * Connect the USB stick with the img file
94 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
95   then the installation begins. Only after that message release the -TV/Radio button-
96     Note: If installation does not start, use a different USB stick.
97 * After successfully installing the receiver will reboot and the installed image should start-up
98[[br]]
99[#point8 Top of Page]
100[[br]]
101----
102'''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
103----
104'' How do I install a Kathrein UFS960 update image? ''
105 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
106 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
107 * Extract the zip file
108 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ .
109     Note: The USB stick should not be formatted with windows, but a separate program, such as the
110     " HP USB Disk Storage Format Tool" (freeware program).
111     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
112 * Turn off the Receiver and disconnect all USB devices.
113 * Connect the USB stick with the img file
114 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
115   then the installation begins. Only after that message release the -TV/Radio button-
116     Note: If installation does not start, use a different USB stick.
117 * After successfully installing the receiver will reboot and the installed image should start-up
118[[br]]
119[#point8 Top of Page]
120[[br]]
121
122----
123'''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
124----
125If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
126
127[[br]]
128[#point8 Top of Page]
129[[br]]
130
131----   
132'''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
133----
134There are two ways to update your TitanNit version and there are merits to both methods :
135
136IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
137[[br]]
138''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
139Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
140
141Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
142[[br]]
143''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
144[[br]]
145[#point8 Top of Page]
146[[br]]
147
148----   
149'''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
150----
151[http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
152 
153[[br]] 
154[#point8 Top of Page] 
155[[br]]
Note: See TracBrowser for help on using the repository browser.