1 | ----
|
---|
2 | '''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
3 | ----
|
---|
4 |
|
---|
5 | Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
|
---|
6 |
|
---|
7 | '''SH4 Fortis Contents'''
|
---|
8 |
|
---|
9 | * [#point8.041 8.041 Kathrein Ufs910]
|
---|
10 | * [#point8.042 8.042 Kathrein Ufs912]
|
---|
11 | * [#point8.043 8.043 Kathrein Ufs913]
|
---|
12 | * [#point8.044 8.044 Kathrein Ufs922]
|
---|
13 | * [#point8.045 8.045 Kathrein Ufs960]
|
---|
14 |
|
---|
15 | '''Additional Info'''
|
---|
16 |
|
---|
17 | * [#point8.046 8.06 Uninstallation]
|
---|
18 | * [#point8.047 8.07 Update TitanNit]
|
---|
19 | * [#point8.048 8.08 IRD Download Location]
|
---|
20 |
|
---|
21 | ----
|
---|
22 | '''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
23 | ----
|
---|
24 | '' How do I install a Kathrein UFS910 update image? ''
|
---|
25 | * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
|
---|
26 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
27 | * Extract the zip file
|
---|
28 | * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick.
|
---|
29 | Note: The USB stick should not be formatted with windows, but a separate program, such as the
|
---|
30 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
31 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
32 | * Turn off the Receiver and disconnect all USB devices.
|
---|
33 | * Connect the USB stick with the img file to the front USB Port
|
---|
34 | * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds)
|
---|
35 | until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button-
|
---|
36 | Note: If installation does not start, use a different USB stick.
|
---|
37 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
38 | [[br]]
|
---|
39 | [#point8 Top of Page]
|
---|
40 | [[br]]
|
---|
41 | ----
|
---|
42 | '''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
43 | ----
|
---|
44 | '' How do I install a Kathrein UFS912 update image? ''
|
---|
45 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
46 | * Extract the zip file
|
---|
47 | * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ .
|
---|
48 | Note: The USB stick should not be formatted with windows, but a separate program, such as the
|
---|
49 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
50 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
51 | * Turn off the Receiver and disconnect all USB devices.
|
---|
52 | * Connect the USB stick with the img file
|
---|
53 | * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
|
---|
54 | then the installation begins. Only after that message release the -TV/Radio button-
|
---|
55 | Note: If installation does not start, use a different USB stick.
|
---|
56 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
57 | [[br]]
|
---|
58 | [#point8.1 Top of Page]
|
---|
59 | [[br]]
|
---|
60 | ----
|
---|
61 | '''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
62 | ----
|
---|
63 | '' How do I install a Kathrein UFS913 update image? ''
|
---|
64 | * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
|
---|
65 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
66 | * Extract the zip file
|
---|
67 | * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
|
---|
68 | Note: The USB stick should not be formatted with windows, but a separate program, such as the
|
---|
69 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
70 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
71 | * Turn off the Receiver and disconnect all USB devices.
|
---|
72 | * Connect the USB stick with the img file
|
---|
73 | * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
|
---|
74 | then the installation begins. Only after that message release the -TV/Radio button-
|
---|
75 | Note: If installation does not start, use a different USB stick.
|
---|
76 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
77 | [[br]]
|
---|
78 | [#point8.1 Top of Page]
|
---|
79 | [[br]]
|
---|
80 | ----
|
---|
81 | '''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
82 | ----
|
---|
83 | '' How do I install a Kathrein UFS922 update image? ''
|
---|
84 | * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
|
---|
85 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
86 | * Extract the zip file
|
---|
87 | * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
|
---|
88 | Note: The USB stick should not be formatted with windows, but a separate program, such as the
|
---|
89 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
90 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
91 | * Turn off the Receiver and disconnect all USB devices.
|
---|
92 | * Connect the USB stick with the img file
|
---|
93 | * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
|
---|
94 | then the installation begins. Only after that message release the -TV/Radio button-
|
---|
95 | Note: If installation does not start, use a different USB stick.
|
---|
96 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
97 | [[br]]
|
---|
98 | [#point8 Top of Page]
|
---|
99 | [[br]]
|
---|
100 | ----
|
---|
101 | '''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
102 | ----
|
---|
103 | '' How do I install a Kathrein UFS960 update image? ''
|
---|
104 | * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
|
---|
105 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
106 | * Extract the zip file
|
---|
107 | * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ .
|
---|
108 | Note: The USB stick should not be formatted with windows, but a separate program, such as the
|
---|
109 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
110 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
111 | * Turn off the Receiver and disconnect all USB devices.
|
---|
112 | * Connect the USB stick with the img file
|
---|
113 | * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
|
---|
114 | then the installation begins. Only after that message release the -TV/Radio button-
|
---|
115 | Note: If installation does not start, use a different USB stick.
|
---|
116 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
117 | [[br]]
|
---|
118 | [#point8 Top of Page]
|
---|
119 | [[br]]
|
---|
120 |
|
---|
121 | ----
|
---|
122 | '''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
123 | ----
|
---|
124 | If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
|
---|
125 |
|
---|
126 | [[br]]
|
---|
127 | [#point8 Top of Page]
|
---|
128 | [[br]]
|
---|
129 |
|
---|
130 | ----
|
---|
131 | '''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
|
---|
132 | ----
|
---|
133 | There are two ways to update your TitanNit version and there are merits to both methods :
|
---|
134 |
|
---|
135 | IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
|
---|
136 | [[br]]
|
---|
137 | ''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
|
---|
138 | Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
|
---|
139 |
|
---|
140 | Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
|
---|
141 | [[br]]
|
---|
142 | ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
|
---|
143 | [[br]]
|
---|
144 | [#point8 Top of Page]
|
---|
145 | [[br]]
|
---|
146 |
|
---|
147 | ----
|
---|
148 | '''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
|
---|
149 | ----
|
---|
150 | [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]
|
---|
151 |
|
---|
152 | [[br]]
|
---|
153 | [#point8 Top of Page]
|
---|
154 | [[br]]
|
---|