| 1 | ----
|
|---|
| 2 | '''8.061 Mips Atemio''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 3 | ----
|
|---|
| 4 |
|
|---|
| 5 | manufacturer blurb.....
|
|---|
| 6 |
|
|---|
| 7 |
|
|---|
| 8 |
|
|---|
| 9 |
|
|---|
| 10 |
|
|---|
| 11 | ----
|
|---|
| 12 | '''8.061 Atemio-Nemesis''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 13 | ----
|
|---|
| 14 | '' How do I install an Atemio 5000 Update UBI image? ''
|
|---|
| 15 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
|---|
| 16 | * Extract the zip file
|
|---|
| 17 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
|---|
| 18 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
|---|
| 19 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
|---|
| 20 | * Turn off the Receiver and disconnect all USB devices.
|
|---|
| 21 | * Connect the USB stick with the IRD file to your Receiver
|
|---|
| 22 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
|---|
| 23 | then the installation begins, Only then release the button.
|
|---|
| 24 | Note: If installation does not start , use a different USB stick.
|
|---|
| 25 | * After successfully installing the receiver will reboot and the installed image should start-up
|
|---|
| 26 | [[br]]
|
|---|
| 27 | [#point8 Top of Page]
|
|---|
| 28 | [[br]]
|
|---|
| 29 | ----
|
|---|
| 30 | '''8.062 Atemio5200''' [=#point8.062] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 31 | ----
|
|---|
| 32 | '' How do I install an Atemio 5200 Update UBI image? ''
|
|---|
| 33 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
|---|
| 34 | * Extract the zip file
|
|---|
| 35 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
|---|
| 36 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
|---|
| 37 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
|---|
| 38 | * Turn off the Receiver and disconnect all USB devices.
|
|---|
| 39 | * Connect the USB stick with the IRD file to your Receiver
|
|---|
| 40 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
|---|
| 41 | then the installation begins, Only then release the button.
|
|---|
| 42 | Note: If installation does not start , use a different USB stick.
|
|---|
| 43 | * After successfully installing the receiver will reboot and the installed image should start-up
|
|---|
| 44 | [[br]]
|
|---|
| 45 | [#point8 Top of Page]
|
|---|
| 46 | [[br]]
|
|---|
| 47 | ----
|
|---|
| 48 | '''8.063 Atemio6000''' [=#point8.063] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 49 | ----
|
|---|
| 50 | '' How do I install an Atemio 6000 Update UBI image? ''
|
|---|
| 51 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
|---|
| 52 | * Extract the zip file
|
|---|
| 53 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
|---|
| 54 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
|---|
| 55 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
|---|
| 56 | * Turn off the Receiver and disconnect all USB devices.
|
|---|
| 57 | * Connect the USB stick with the IRD file to your Receiver
|
|---|
| 58 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
|---|
| 59 | then the installation begins, Only then release the button.
|
|---|
| 60 | Note: If installation does not start , use a different USB stick.
|
|---|
| 61 | * After successfully installing the receiver will reboot and the installed image should start-up
|
|---|
| 62 | [[br]]
|
|---|
| 63 | [#point8 Top of Page]
|
|---|
| 64 | [[br]]
|
|---|
| 65 | ----
|
|---|
| 66 | '''8.064 Atemio6100''' [=#point8.064] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 67 | ----
|
|---|
| 68 | '' How do I install an Atemio 6100 Update UBI image? ''
|
|---|
| 69 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
|---|
| 70 | * Extract the zip file
|
|---|
| 71 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
|---|
| 72 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
|---|
| 73 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
|---|
| 74 | * Turn off the Receiver and disconnect all USB devices.
|
|---|
| 75 | * Connect the USB stick with the IRD file to your Receiver
|
|---|
| 76 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
|---|
| 77 | then the installation begins, Only then release the button.
|
|---|
| 78 | Note: If installation does not start , use a different USB stick.
|
|---|
| 79 | * After successfully installing the receiver will reboot and the installed image should start-up
|
|---|
| 80 | [[br]]
|
|---|
| 81 | [#point8 Top of Page]
|
|---|
| 82 | [[br]]
|
|---|
| 83 | ----
|
|---|
| 84 | '''8.065 Atemio6200''' [=#point8.065] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 85 | ----
|
|---|
| 86 | '' How do I install an Atemio 6200 Update UBI image? ''
|
|---|
| 87 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
|---|
| 88 | * Extract the zip file
|
|---|
| 89 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
|---|
| 90 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
|---|
| 91 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
|---|
| 92 | * Turn off the Receiver and disconnect all USB devices.
|
|---|
| 93 | * Connect the USB stick with the IRD file to your Receiver
|
|---|
| 94 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
|---|
| 95 | then the installation begins, Only then release the button.
|
|---|
| 96 | Note: If installation does not start , use a different USB stick.
|
|---|
| 97 | * After successfully installing the receiver will reboot and the installed image should start-up
|
|---|
| 98 | [[br]]
|
|---|
| 99 | [#point8 Top of Page]
|
|---|
| 100 | [[br]]
|
|---|
