source: wiki/pages/fr/Installation-Recovery-Mips-Golden-Interstar @ 37379

Last change on this file since 37379 was 37379, checked in by professor_jonny, 4 years ago
File size: 2.5 KB
Line 
1----
2'''8.080 Goldern interstar Xpeedlx1/2''' [=#point8.080] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
3----
4
5manufacturer blurb
6
7
8
9----
10'''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
11----
12''How do I install a Xpeedlx1/2 update image? ''
13 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
14 * Extract the zip file
15 * Now copy the unzipped firmware folder "xpeedlx3"  to a formatted FAT32 USB stick.
16    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
17 * Turn off the Receiver and disconnect all USB devices.
18 * Connect the USB stick with the update image file
19 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
20
21Note: If installation does not start, use a different USB stick.
22•After successfully installing the receiver will reboot and the installed image should start-up
23[[br]]
24[#point8 Top of Page]
25[[br]]
26----
27'''8.082 goldern interstar Xpeedlx3''' [=#point8.082] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
28----
29''How do I install a Xpeedlx3 update image? ''
30 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
31 * Extract the zip file
32 * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.
33    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
34 * Turn off the Receiver and disconnect all USB devices.
35 * Connect the USB stick with the update image file
36 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
37
38Note: If installation does not start, use a different USB stick.
39•After successfully installing the receiver will reboot and the installed image should start-up
40[[br]]
41[#point8 Top of Page]
42[[br]]
Note: See TracBrowser for help on using the repository browser.