| [37373] | 1 | [[TranslatedPages]]
|
|---|
| 2 | ----
|
|---|
| 3 | '''8.100 Sezam-Marvel''' [=#point8.100] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
|
|---|
| 4 | ----
|
|---|
| 5 |
|
|---|
| 6 | manufacturer blurb....
|
|---|
| 7 |
|
|---|
| 8 |
|
|---|
| 9 |
|
|---|
| 10 |
|
|---|
| 11 |
|
|---|
| 12 | ----
|
|---|
| 13 | '''8.101 Sezam-Marvel''' [=#point8.101] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
|
|---|
| 14 | ----
|
|---|
| 15 | ''How do I install a Sezam-Marvel update image? ''
|
|---|
| 16 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
|
|---|
| 17 | * Extract the zip file
|
|---|
| 18 | * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
|
|---|
| 19 | Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
|---|
| 20 | * Turn off the Receiver and disconnect all USB devices.
|
|---|
| 21 | * Connect the USB stick with the update image file
|
|---|
| 22 | * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
|
|---|
| 23 |
|
|---|
| 24 | Note: If installation does not start, use a different USB stick.
|
|---|
| 25 | •After successfully installing the receiver will reboot and the installed image should start-up
|
|---|
| 26 | [[br]]
|
|---|
| 27 | [#point8 Top of Page]
|
|---|
| 28 | [[br]]
|
|---|
| 29 | ----
|
|---|
| 30 | '''8.102 Sezam-1000HD''' [=#point8.102] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
|
|---|
| 31 | ----
|
|---|
| 32 | ''How do I install a Sezam-1000HD update image? ''
|
|---|
| 33 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
|
|---|
| 34 | * Extract the zip file
|
|---|
| 35 | * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
|
|---|
| 36 | Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
|---|
| 37 | * Turn off the Receiver and disconnect all USB devices.
|
|---|
| 38 | * Connect the USB stick with the update image file
|
|---|
| 39 | * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
|
|---|
| 40 |
|
|---|
| 41 | Note: If installation does not start, use a different USB stick.
|
|---|
| 42 | •After successfully installing the receiver will reboot and the installed image should start-up
|
|---|
| 43 | [[br]]
|
|---|
| 44 | [#point8 Top of Page]
|
|---|
| 45 | [[br]]
|
|---|
