source: wiki/pages/fr/Installation-Recovery-SH4-Homecast @ 37379

Last change on this file since 37379 was 37379, checked in by professor_jonny, 4 years ago
File size: 3.4 KB
Line 
1----
2'''8.020 Homecast''' [=#point8.020] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
3----
4
5Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
6
7'''SH4 Homecast Contents'''
8
9 * [#point8.021 8.021 Homecast pro]
10
11
12'''Additional Info'''
13
14 * [#point8.022 8.022 Uninstallation]
15 * [#point8.023 8.025 Update TitanNit]
16 * [#point8.024 8.024 IRD Download Location]
17
18----
19'''8.021 Homecast Pro''' [=#point8.021] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
20----
21'' How do I install an Homecast UPDATEUSB Image? ''
22 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.2 IRD Download Locations])
23 * Extract the zip file
24 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
25     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
26     " HP USB Disk Storage Format Tool" (freeware program).
27     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
28 * Turn off the Receiver and disconnect all USB devices.
29 * Connect the USB stick with the IMG file to your Receiver
30* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
31    then the installation starts. Only then release the button
32     Note: If installation does not start, use a different USB stick.
33 * The installation is finished when DONE appears on the receiver.
34 * Restart the machine after by the main switch again to .
35[[br]]
36[#point8 Top of Page]
37[[br]]
38
39----
40'''8.022 Uninstalling Titan''' [=#point8.022] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
41----
42If you have an Homecast receiver all you have to do is install your original IMG file as explained above and no bootloader changes are necessary.
43
44[[br]]
45[#point8 Top of Page]
46[[br]]
47
48----   
49'''8.023 Update TitanNit''' [=#point8.023] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
50----
51There are two ways to update your TitanNit version and there are merits to both methods :
52
53IRD offline method see [#point8.020 Homecast Contents] and select your Receiver model to show information on how to update titan using an IRD TitanNit image.
54[[br]]
55''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed.
56Plugins and files installed to MNT or a valid configured storage device will retain there settings .''
57
58Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
59[[br]]
60''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
61[[br]]
62[#point8 Top of Page]
63[[br]]
64
65----   
66'''8.024 IRD Download Locations''' [=#point8.024] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
67----
68
69* [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
70 
71[[br]] 
72[#point8 Top of Page] 
73[[br]]
74
Note: See TracBrowser for help on using the repository browser.