source: wiki/pages/fr/Installation-Recovery-SH4-IPBox @ 37373

Last change on this file since 37373 was 37373, checked in by professor_jonny, 4 years ago
File size: 7.1 KB
Line 
1[[TranslatedPages]]
2----
3'''8.031 Ipbox''' [=#point8.030] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
4----
5
6Ipbox is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region.
7
8'''SH4 Ipbox Contents'''
9
10 * [#point8.031 8.031 Ipbox91]
11 * [#point8.032 8.032 Ipbox900]
12 * [#point8.033 8.033 Ipbox910]
13 * [#point8.034 8.034 Ipbox9000]
14
15'''Additional Info'''
16
17 * [#point8.035 8.035 Uninstallation]
18 * [#point8.036 8.036 Update TitanNit]
19 * [#point8.037 8.037 IRD Download Location]
20
21----
22'''8.031 Ipbox91''' [=#point8.031] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
23----
24'' How do I install an Ipbox 91 UPDATEUSB Image? ''
25 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
26 * Extract the zip file
27 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
28     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
29     " HP USB Disk Storage Format Tool" (freeware program).
30     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
31 * Turn off the Receiver and disconnect all USB devices.
32 * Connect the USB stick with the IMG file to your Receiver
33* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
34    then the installation starts. Only then release the button
35     Note: If installation does not start, use a different USB stick.
36 * The installation is finished when DONE appears on the receiver.
37 * Restart the machine after by the main switch again to .
38[[br]]
39[#point8 Top of Page]
40[[br]]
41----
42'''8.032 Ipbox900''' [=#point8.032] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
43----
44'' How do I install an Ipbox 900 UPDATEUSB Image? ''
45 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
46 * Extract the zip file
47 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
48     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
49     " HP USB Disk Storage Format Tool" (freeware program).
50     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
51 * Turn off the Receiver and disconnect all USB devices.
52 * Connect the USB stick with the IMG file to your Receiver
53* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
54    then the installation starts. Only then release the button
55     Note: If installation does not start, use a different USB stick.
56 * The installation is finished when DONE appears on the receiver.
57 * Restart the machine after by the main switch again to .
58[[br]]
59[#point8 Top of Page]
60[[br]]
61----
62'''8.033 Ipbox910''' [=#point8.033] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
63----
64'' How do I install an Ipbox 910 UPDATEUSB Image? ''
65 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
66 * Extract the zip file
67 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
68     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
69     " HP USB Disk Storage Format Tool" (freeware program).
70     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
71 * Turn off the Receiver and disconnect all USB devices.
72 * Connect the USB stick with the IMG file to your Receiver
73* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
74    then the installation starts. Only then release the button
75     Note: If installation does not start, use a different USB stick.
76 * The installation is finished when DONE appears on the receiver.
77 * Restart the machine after by the main switch again to .
78[[br]]
79[#point8 Top of Page]
80[[br]]
81----
82'''8.034 Ipbox9000''' [=#point8.034] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
83----
84'' How do I install an Ipbox 9000 UPDATEUSB Image? ''
85 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
86 * Extract the zip file
87 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
88     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
89     " HP USB Disk Storage Format Tool" (freeware program).
90     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
91 * Turn off the Receiver and disconnect all USB devices.
92 * Connect the USB stick with the IMG file to your Receiver
93* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
94    then the installation starts. Only then release the button
95     Note: If installation does not start, use a different USB stick.
96 * The installation is finished when DONE appears on the receiver.
97 * Restart the machine after by the main switch again to .
98[[br]]
99[#point8 Top of Page]
100[[br]]
101
102----
103'''8.035 Uninstalling Titan''' [=#point8.035] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
104----
105If you have an Ipbox receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
106
107[[br]]
108[#point8 Top of Page]
109[[br]]
110
111----   
112'''8.036 Update TitanNit''' [=#point8.036] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
113----
114There are two ways to update your TitanNit version and there are merits to both methods :
115
116IRD offline method see [#point8 Installation / Recovery] and select your Reciever model to show information on how to update titan using an IRD titannit image.
117[[br]]
118''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
119Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
120
121Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
122[[br]]
123''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
124[[br]]
125[#point8 Top of Page]
126[[br]]
127
128----   
129'''8.037 IRD Download Locations''' [=#point8.037] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
130----
131
132* [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
133 
134[[br]] 
135[#point8 Top of Page] 
136[[br]]
Note: See TracBrowser for help on using the repository browser.