source: wiki/pages/fr/Installation-Recovery-SH4-IPBox @ 37379

Last change on this file since 37379 was 37379, checked in by professor_jonny, 4 years ago
File size: 7.1 KB
Line 
1----
2'''8.031 Ipbox''' [=#point8.030] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
3----
4
5Ipbox is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region.
6
7'''SH4 Ipbox Contents'''
8
9 * [#point8.031 8.031 Ipbox91]
10 * [#point8.032 8.032 Ipbox900]
11 * [#point8.033 8.033 Ipbox910]
12 * [#point8.034 8.034 Ipbox9000]
13
14'''Additional Info'''
15
16 * [#point8.035 8.035 Uninstallation]
17 * [#point8.036 8.036 Update TitanNit]
18 * [#point8.037 8.037 IRD Download Location]
19
20----
21'''8.031 Ipbox91''' [=#point8.031] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
22----
23'' How do I install an Ipbox 91 UPDATEUSB Image? ''
24 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
25 * Extract the zip file
26 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
27     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
28     " HP USB Disk Storage Format Tool" (freeware program).
29     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
30 * Turn off the Receiver and disconnect all USB devices.
31 * Connect the USB stick with the IMG file to your Receiver
32* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
33    then the installation starts. Only then release the button
34     Note: If installation does not start, use a different USB stick.
35 * The installation is finished when DONE appears on the receiver.
36 * Restart the machine after by the main switch again to .
37[[br]]
38[#point8 Top of Page]
39[[br]]
40----
41'''8.032 Ipbox900''' [=#point8.032] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
42----
43'' How do I install an Ipbox 900 UPDATEUSB Image? ''
44 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
45 * Extract the zip file
46 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
47     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
48     " HP USB Disk Storage Format Tool" (freeware program).
49     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
50 * Turn off the Receiver and disconnect all USB devices.
51 * Connect the USB stick with the IMG file to your Receiver
52* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
53    then the installation starts. Only then release the button
54     Note: If installation does not start, use a different USB stick.
55 * The installation is finished when DONE appears on the receiver.
56 * Restart the machine after by the main switch again to .
57[[br]]
58[#point8 Top of Page]
59[[br]]
60----
61'''8.033 Ipbox910''' [=#point8.033] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
62----
63'' How do I install an Ipbox 910 UPDATEUSB Image? ''
64 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
65 * Extract the zip file
66 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
67     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
68     " HP USB Disk Storage Format Tool" (freeware program).
69     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
70 * Turn off the Receiver and disconnect all USB devices.
71 * Connect the USB stick with the IMG file to your Receiver
72* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
73    then the installation starts. Only then release the button
74     Note: If installation does not start, use a different USB stick.
75 * The installation is finished when DONE appears on the receiver.
76 * Restart the machine after by the main switch again to .
77[[br]]
78[#point8 Top of Page]
79[[br]]
80----
81'''8.034 Ipbox9000''' [=#point8.034] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
82----
83'' How do I install an Ipbox 9000 UPDATEUSB Image? ''
84 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
85 * Extract the zip file
86 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
87     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
88     " HP USB Disk Storage Format Tool" (freeware program).
89     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
90 * Turn off the Receiver and disconnect all USB devices.
91 * Connect the USB stick with the IMG file to your Receiver
92* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
93    then the installation starts. Only then release the button
94     Note: If installation does not start, use a different USB stick.
95 * The installation is finished when DONE appears on the receiver.
96 * Restart the machine after by the main switch again to .
97[[br]]
98[#point8 Top of Page]
99[[br]]
100
101----
102'''8.035 Uninstalling Titan''' [=#point8.035] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
103----
104If you have an Ipbox receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
105
106[[br]]
107[#point8 Top of Page]
108[[br]]
109
110----   
111'''8.036 Update TitanNit''' [=#point8.036] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
112----
113There are two ways to update your TitanNit version and there are merits to both methods :
114
115IRD offline method see [#point8 Installation / Recovery] and select your Reciever model to show information on how to update titan using an IRD titannit image.
116[[br]]
117''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
118Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
119
120Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
121[[br]]
122''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
123[[br]]
124[#point8 Top of Page]
125[[br]]
126
127----   
128'''8.037 IRD Download Locations''' [=#point8.037] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
129----
130
131* [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
132 
133[[br]] 
134[#point8 Top of Page] 
135[[br]]
Note: See TracBrowser for help on using the repository browser.