source: wiki/pages/fr/Installation-Recovery-SH4-Katherin @ 37379

Last change on this file since 37379 was 37379, checked in by professor_jonny, 4 years ago
File size: 8.9 KB
Line 
1----
2'''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
3----
4
5Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
6
7'''SH4 Fortis Contents'''
8
9 * [#point8.041 8.041 Kathrein Ufs910]
10 * [#point8.042 8.042 Kathrein Ufs912]
11 * [#point8.043 8.043 Kathrein Ufs913]
12 * [#point8.044 8.044 Kathrein Ufs922]
13 * [#point8.045 8.045 Kathrein Ufs960]
14
15'''Additional Info'''
16
17 * [#point8.046 8.06 Uninstallation]
18 * [#point8.047 8.07 Update TitanNit]
19 * [#point8.048 8.08 IRD Download Location]
20
21----
22'''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
23----
24'' How do I install a Kathrein UFS910 update image? ''
25 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
26 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
27 * Extract the zip file
28 * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick.
29     Note: The USB stick should not be formatted with windows, but a separate program, such as the
30     " HP USB Disk Storage Format Tool" (freeware program).
31     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
32 * Turn off the Receiver and disconnect all USB devices.
33 * Connect the USB stick with the img file to the front USB Port
34 * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds)
35   until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button-
36     Note: If installation does not start, use a different USB stick.
37 * After successfully installing the receiver will reboot and the installed image should start-up
38[[br]]
39[#point8 Top of Page]
40[[br]]
41----
42'''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
43----
44'' How do I install a Kathrein UFS912 update image? ''
45 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
46 * Extract the zip file
47 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ .
48     Note: The USB stick should not be formatted with windows, but a separate program, such as the
49     " HP USB Disk Storage Format Tool" (freeware program).
50     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
51 * Turn off the Receiver and disconnect all USB devices.
52 * Connect the USB stick with the img file
53 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
54   then the installation begins. Only after that message release the -TV/Radio button-
55     Note: If installation does not start, use a different USB stick.
56 * After successfully installing the receiver will reboot and the installed image should start-up
57[[br]]
58[#point8.1 Top of Page]
59[[br]]
60----
61'''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
62----
63'' How do I install a Kathrein UFS913 update image? ''
64 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
65 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
66 * Extract the zip file
67 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
68     Note: The USB stick should not be formatted with windows, but a separate program, such as the
69     " HP USB Disk Storage Format Tool" (freeware program).
70     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
71 * Turn off the Receiver and disconnect all USB devices.
72 * Connect the USB stick with the img file
73 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
74   then the installation begins. Only after that message release the -TV/Radio button-
75     Note: If installation does not start, use a different USB stick.
76 * After successfully installing the receiver will reboot and the installed image should start-up
77[[br]]
78[#point8.1 Top of Page]
79[[br]]
80----
81'''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
82----
83'' How do I install a Kathrein UFS922 update image? ''
84 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
85 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
86 * Extract the zip file
87 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
88     Note: The USB stick should not be formatted with windows, but a separate program, such as the
89     " HP USB Disk Storage Format Tool" (freeware program).
90     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
91 * Turn off the Receiver and disconnect all USB devices.
92 * Connect the USB stick with the img file
93 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
94   then the installation begins. Only after that message release the -TV/Radio button-
95     Note: If installation does not start, use a different USB stick.
96 * After successfully installing the receiver will reboot and the installed image should start-up
97[[br]]
98[#point8 Top of Page]
99[[br]]
100----
101'''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
102----
103'' How do I install a Kathrein UFS960 update image? ''
104 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
105 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
106 * Extract the zip file
107 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ .
108     Note: The USB stick should not be formatted with windows, but a separate program, such as the
109     " HP USB Disk Storage Format Tool" (freeware program).
110     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
111 * Turn off the Receiver and disconnect all USB devices.
112 * Connect the USB stick with the img file
113 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
114   then the installation begins. Only after that message release the -TV/Radio button-
115     Note: If installation does not start, use a different USB stick.
116 * After successfully installing the receiver will reboot and the installed image should start-up
117[[br]]
118[#point8 Top of Page]
119[[br]]
120
121----
122'''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
123----
124If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
125
126[[br]]
127[#point8 Top of Page]
128[[br]]
129
130----   
131'''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
132----
133There are two ways to update your TitanNit version and there are merits to both methods :
134
135IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
136[[br]]
137''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
138Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
139
140Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
141[[br]]
142''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
143[[br]]
144[#point8 Top of Page]
145[[br]]
146
147----   
148'''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
149----
150[http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
151 
152[[br]] 
153[#point8 Top of Page] 
154[[br]]
Note: See TracBrowser for help on using the repository browser.