source: wiki/pages/fr/Installation-Recovery-SH4-Spark @ 37379

Last change on this file since 37379 was 37379, checked in by professor_jonny, 4 years ago
File size: 4.6 KB
Line 
1----
2'''8.051 SPARK''' [=#point8.050] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
3----
4
5Spark is a reseller of the Fulan Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized hardware.
6
7'''SH4 Spark Contents'''
8
9 * [#point8.051 8.051 SPARK (7111)]
10 * [#point8.052 8.052 SPARK (7162)]
11
12'''Additional Info'''
13
14
15 * [#point8.053 8.053 Uninstallation]
16 * [#point8.054 8.054 Update TitanNit]
17 * [#point8.055 8.055 IRD Download Location]
18
19
20
21----
22'''8.051 SPARK (7111)''' [=#point8.051] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
23----
24'' How do I install a Spark (7111) Update Image? ''
25  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
26  * Extract the zip file
27  * Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2"
28     Note: The USB stick should not be formatted with windows, but a separate program, such as the
29     " HP USB Disk Storage Format Tool" (freeware program).
30     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
31  * Turn off the device.
32  * Connect the USB stick with the update file
33  * hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears,
34    then the installation will begin, when you see "U LD" in the display release the "OK" button.
35      Note: If the installation does not start, use a different USB stick.
36  * After installation "SUCC" appears in the display boot the receiver and the new image should appear.
37[[br]]
38[#point8.050 Top of Page]
39[[br]]
40----
41'''8.052 SPARK7162''' [=#point8.052] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
42----
43'' How do I install a Spark (7162) Update Image? ''
44  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
45  * Extract the zip file
46  * Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2"
47     Note: The USB stick should not be formatted with windows, but a separate program, such as the
48     " HP USB Disk Storage Format Tool" (freeware program).
49     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
50  * Turn off the device.
51  * Connect the USB stick with the update file
52  * hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears,
53    then the installation will begin, when you see "U LD" in the display release the "OK" button.
54      Note: If the installation does not start, use a different USB stick.
55  * After installation "SUCC" appears in the display boot the receiver and the new image should appear.
56[[br]]
57[#point8.050 Top of Page]
58[[br]]
59
60----
61'''8.053 Uninstalling Titan''' [=#point8.053] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
62----
63If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
64
65[[br]]
66[#point8.050 Top of Page]
67[[br]]
68
69----   
70'''8.054 Update TitanNit''' [=#point8.054] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
71----
72There are two ways to update your TitanNit version and there are merits to both methods :
73
74IRD offline method see [#point8 Installation / Recovery] and select your Receiver model to show information on how to update titan using an IRD TitanNit image.
75[[br]]
76''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed.
77Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
78
79Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
80[[br]]
81''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
82[[br]]
83[#point8.050 Top of Page]
84[[br]]
85
86----   
87'''8.055 IRD Download Locations''' [=#point8.055] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
88----
89[http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
90 
91[[br]] 
92[#point8.050 Top of Page] 
93[[br]]
Note: See TracBrowser for help on using the repository browser.