source: wiki/pages/gr/Installation-Recovery-Mips-Beyonwiz @ 37407

Last change on this file since 37407 was 37379, checked in by jonathan brophy, 8 years ago
File size: 1.4 KB
Line 
1----
2'''8.071 Beyonwiz''' [=#point8.070] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
3----
4
5
6manufacturer blurb.....
7
8
9----
10'''8.071 Beyonwiz T4''' [=#point8.071] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
11----
12'' How do I install an Beyonwiz T4 Update UBI image? ''
13 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
14 * Extract the zip file
15 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
16    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
17     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
18 * Turn off the Receiver and disconnect all USB devices.
19 * Connect the USB stick with the IRD file to your Receiver
20 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
21   then the installation begins, Only then release the button.
22    Note: If installation does not start , use a different USB stick.
23 * After successfully installing the receiver will reboot and the installed image should start-up
24[[br]]
25[#point8 Top of Page]
26[[br]]
Note: See TracBrowser for help on using the repository browser.