| 1 | ----
|
|---|
| 2 | '''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 3 | ----
|
|---|
| 4 |
|
|---|
| 5 | Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
|
|---|
| 6 |
|
|---|
| 7 | '''SH4 Fortis Contents'''
|
|---|
| 8 |
|
|---|
| 9 | * [#point8.041 8.041 Kathrein Ufs910]
|
|---|
| 10 | * [#point8.042 8.042 Kathrein Ufs912]
|
|---|
| 11 | * [#point8.043 8.043 Kathrein Ufs913]
|
|---|
| 12 | * [#point8.044 8.044 Kathrein Ufs922]
|
|---|
| 13 | * [#point8.045 8.045 Kathrein Ufs960]
|
|---|
| 14 |
|
|---|
| 15 | '''Additional Info'''
|
|---|
| 16 |
|
|---|
| 17 | * [#point8.046 8.06 Uninstallation]
|
|---|
| 18 | * [#point8.047 8.07 Update TitanNit]
|
|---|
| 19 | * [#point8.048 8.08 IRD Download Location]
|
|---|
| 20 |
|
|---|
| 21 | ----
|
|---|
| 22 | '''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 23 | ----
|
|---|
| 24 | '' How do I install a Kathrein UFS910 update image? ''
|
|---|
| 25 | * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
|
|---|
| 26 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
|---|
| 27 | * Extract the zip file
|
|---|
| 28 | * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick.
|
|---|
| 29 | Note: The USB stick should not be formatted with windows, but a separate program, such as the
|
|---|
| 30 | " HP USB Disk Storage Format Tool" (freeware program).
|
|---|
| 31 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
|---|
| 32 | * Turn off the Receiver and disconnect all USB devices.
|
|---|
| 33 | * Connect the USB stick with the img file to the front USB Port
|
|---|
| 34 | * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds)
|
|---|
| 35 | until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button-
|
|---|
| 36 | Note: If installation does not start, use a different USB stick.
|
|---|
| 37 | * After successfully installing the receiver will reboot and the installed image should start-up
|
|---|
| 38 | [[br]]
|
|---|
| 39 | [#point8 Top of Page]
|
|---|
| 40 | [[br]]
|
|---|
| 41 | ----
|
|---|
| 42 | '''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 43 | ----
|
|---|
| 44 | '' How do I install a Kathrein UFS912 update image? ''
|
|---|
| 45 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
|---|
| 46 | * Extract the zip file
|
|---|
| 47 | * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ .
|
|---|
| 48 | Note: The USB stick should not be formatted with windows, but a separate program, such as the
|
|---|
| 49 | " HP USB Disk Storage Format Tool" (freeware program).
|
|---|
| 50 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
|---|
| 51 | * Turn off the Receiver and disconnect all USB devices.
|
|---|
| 52 | * Connect the USB stick with the img file
|
|---|
| 53 | * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
|
|---|
| 54 | then the installation begins. Only after that message release the -TV/Radio button-
|
|---|
| 55 | Note: If installation does not start, use a different USB stick.
|
|---|
| 56 | * After successfully installing the receiver will reboot and the installed image should start-up
|
|---|
| 57 | [[br]]
|
|---|
| 58 | [#point8.1 Top of Page]
|
|---|
| 59 | [[br]]
|
|---|
| 60 | ----
|
|---|
| 61 | '''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 62 | ----
|
|---|
| 63 | '' How do I install a Kathrein UFS913 update image? ''
|
|---|
| 64 | * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
|
|---|
| 65 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
|---|
| 66 | * Extract the zip file
|
|---|
| 67 | * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
|
|---|
| 68 | Note: The USB stick should not be formatted with windows, but a separate program, such as the
|
|---|
| 69 | " HP USB Disk Storage Format Tool" (freeware program).
|
|---|
| 70 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
|---|
| 71 | * Turn off the Receiver and disconnect all USB devices.
|
|---|
| 72 | * Connect the USB stick with the img file
|
|---|
| 73 | * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
|
|---|
| 74 | then the installation begins. Only after that message release the -TV/Radio button-
|
|---|
| 75 | Note: If installation does not start, use a different USB stick.
|
|---|
| 76 | * After successfully installing the receiver will reboot and the installed image should start-up
|
|---|
| 77 | [[br]]
|
|---|
| 78 | [#point8.1 Top of Page]
|
|---|
| 79 | [[br]]
|
|---|
| 80 | ----
|
|---|
| 81 | '''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 82 | ----
|
|---|
| 83 | '' How do I install a Kathrein UFS922 update image? ''
|
|---|
| 84 | * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
|
|---|
| 85 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
|---|
| 86 | * Extract the zip file
|
|---|
| 87 | * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
|
|---|
| 88 | Note: The USB stick should not be formatted with windows, but a separate program, such as the
|
|---|
| 89 | " HP USB Disk Storage Format Tool" (freeware program).
|
|---|
| 90 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
|---|
| 91 | * Turn off the Receiver and disconnect all USB devices.
|
|---|
| 92 | * Connect the USB stick with the img file
|
|---|
| 93 | * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
|
|---|
| 94 | then the installation begins. Only after that message release the -TV/Radio button-
|
|---|
| 95 | Note: If installation does not start, use a different USB stick.
|
|---|
| 96 | * After successfully installing the receiver will reboot and the installed image should start-up
|
|---|
| 97 | [[br]]
|
|---|
| 98 | [#point8 Top of Page]
|
|---|
| 99 | [[br]]
|
|---|
| 100 | ----
|
|---|
| 101 | '''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 102 | ----
|
|---|
| 103 | '' How do I install a Kathrein UFS960 update image? ''
|
|---|
| 104 | * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
|
|---|
| 105 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
|---|
| 106 | * Extract the zip file
|
|---|
| 107 | * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ .
|
|---|
| 108 | Note: The USB stick should not be formatted with windows, but a separate program, such as the
|
|---|
| 109 | " HP USB Disk Storage Format Tool" (freeware program).
|
|---|
| 110 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
|---|
| 111 | * Turn off the Receiver and disconnect all USB devices.
|
|---|
| 112 | * Connect the USB stick with the img file
|
|---|
| 113 | * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
|
|---|
| 114 | then the installation begins. Only after that message release the -TV/Radio button-
|
|---|
| 115 | Note: If installation does not start, use a different USB stick.
|
|---|
| 116 | * After successfully installing the receiver will reboot and the installed image should start-up
|
|---|
| 117 | [[br]]
|
|---|
| 118 | [#point8 Top of Page]
|
|---|
| 119 | [[br]]
|
|---|
| 120 |
|
|---|
| 121 | ----
|
|---|
| 122 | '''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
|---|
| 123 | ----
|
|---|
| 124 | If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
|
|---|
| 125 |
|
|---|
| 126 | [[br]]
|
|---|
| 127 | [#point8 Top of Page]
|
|---|
| 128 | [[br]]
|
|---|
| 129 |
|
|---|
| 130 | ----
|
|---|
| 131 | '''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
|
|---|
| 132 | ----
|
|---|
| 133 | There are two ways to update your TitanNit version and there are merits to both methods :
|
|---|
| 134 |
|
|---|
| 135 | IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
|
|---|
| 136 | [[br]]
|
|---|
| 137 | ''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
|
|---|
| 138 | Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
|
|---|
| 139 |
|
|---|
| 140 | Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
|
|---|
| 141 | [[br]]
|
|---|
| 142 | ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
|
|---|
| 143 | [[br]]
|
|---|
| 144 | [#point8 Top of Page]
|
|---|
| 145 | [[br]]
|
|---|
| 146 |
|
|---|
| 147 | ----
|
|---|
| 148 | '''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
|
|---|
| 149 | ----
|
|---|
| 150 | [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]
|
|---|
| 151 |
|
|---|
| 152 | [[br]]
|
|---|
| 153 | [#point8 Top of Page]
|
|---|
| 154 | [[br]]
|
|---|
