[43268] | 1 | [[TranslatedPages]]
|
---|
| 2 | ----
|
---|
| 3 | '''8.061 Mips Atemio''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 4 | ----
|
---|
| 5 |
|
---|
| 6 | manufacturer blurb.....
|
---|
| 7 |
|
---|
| 8 |
|
---|
| 9 |
|
---|
| 10 |
|
---|
| 11 |
|
---|
| 12 | ----
|
---|
| 13 | '''8.061 Atemio-Nemesis''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 14 | ----
|
---|
| 15 | '' How do I install an Atemio 5000 Update UBI image? ''
|
---|
| 16 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 17 | * Extract the zip file
|
---|
| 18 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 19 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 20 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 21 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 22 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 23 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
| 24 | then the installation begins, Only then release the button.
|
---|
| 25 | Note: If installation does not start , use a different USB stick.
|
---|
| 26 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 27 | [[br]]
|
---|
| 28 | [#point8 Top of Page]
|
---|
| 29 | [[br]]
|
---|
| 30 | ----
|
---|
| 31 | '''8.062 Atemio5200''' [=#point8.062] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 32 | ----
|
---|
| 33 | '' How do I install an Atemio 5200 Update UBI image? ''
|
---|
| 34 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 35 | * Extract the zip file
|
---|
| 36 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 37 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 38 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 39 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 40 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 41 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
| 42 | then the installation begins, Only then release the button.
|
---|
| 43 | Note: If installation does not start , use a different USB stick.
|
---|
| 44 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 45 | [[br]]
|
---|
| 46 | [#point8 Top of Page]
|
---|
| 47 | [[br]]
|
---|
| 48 | ----
|
---|
| 49 | '''8.063 Atemio6000''' [=#point8.063] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 50 | ----
|
---|
| 51 | '' How do I install an Atemio 6000 Update UBI image? ''
|
---|
| 52 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 53 | * Extract the zip file
|
---|
| 54 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 55 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 56 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 57 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 58 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 59 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
| 60 | then the installation begins, Only then release the button.
|
---|
| 61 | Note: If installation does not start , use a different USB stick.
|
---|
| 62 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 63 | [[br]]
|
---|
| 64 | [#point8 Top of Page]
|
---|
| 65 | [[br]]
|
---|
| 66 | ----
|
---|
| 67 | '''8.064 Atemio6100''' [=#point8.064] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 68 | ----
|
---|
| 69 | '' How do I install an Atemio 6100 Update UBI image? ''
|
---|
| 70 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 71 | * Extract the zip file
|
---|
| 72 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 73 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 74 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 75 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 76 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 77 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
| 78 | then the installation begins, Only then release the button.
|
---|
| 79 | Note: If installation does not start , use a different USB stick.
|
---|
| 80 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 81 | [[br]]
|
---|
| 82 | [#point8 Top of Page]
|
---|
| 83 | [[br]]
|
---|
| 84 | ----
|
---|
| 85 | '''8.065 Atemio6200''' [=#point8.065] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
| 86 | ----
|
---|
| 87 | '' How do I install an Atemio 6200 Update UBI image? ''
|
---|
| 88 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
| 89 | * Extract the zip file
|
---|
| 90 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
| 91 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
| 92 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
| 93 | * Turn off the Receiver and disconnect all USB devices.
|
---|
| 94 | * Connect the USB stick with the IRD file to your Receiver
|
---|
| 95 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
| 96 | then the installation begins, Only then release the button.
|
---|
| 97 | Note: If installation does not start , use a different USB stick.
|
---|
| 98 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
| 99 | [[br]]
|
---|
| 100 | [#point8 Top of Page]
|
---|
| 101 | [[br]]
|
---|