source: wiki/pages/nl/Installation-Recovery-Mips-Atemio @ 43268

Last change on this file since 43268 was 43268, checked in by obi, 5 months ago

reset wiki

File size: 6.4 KB
Line 
1[[TranslatedPages]]
2----
3'''8.061 Mips Atemio''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
4----
5
6manufacturer blurb.....
7
8
9
10
11
12----
13'''8.061 Atemio-Nemesis''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
14----
15'' How do I install an Atemio 5000 Update UBI image? ''
16 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
17 * Extract the zip file
18 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
19    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
20     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
21 * Turn off the Receiver and disconnect all USB devices.
22 * Connect the USB stick with the IRD file to your Receiver
23 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
24   then the installation begins, Only then release the button.
25    Note: If installation does not start , use a different USB stick.
26 * After successfully installing the receiver will reboot and the installed image should start-up
27[[br]]
28[#point8 Top of Page]
29[[br]]
30----
31'''8.062 Atemio5200''' [=#point8.062] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
32----
33'' How do I install an Atemio 5200 Update UBI image? ''
34 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
35 * Extract the zip file
36 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
37    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
38     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
39 * Turn off the Receiver and disconnect all USB devices.
40 * Connect the USB stick with the IRD file to your Receiver
41 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
42   then the installation begins, Only then release the button.
43    Note: If installation does not start , use a different USB stick.
44 * After successfully installing the receiver will reboot and the installed image should start-up
45[[br]]
46[#point8 Top of Page]
47[[br]]
48----
49'''8.063 Atemio6000''' [=#point8.063] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
50----
51'' How do I install an Atemio 6000 Update UBI image? ''
52 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
53 * Extract the zip file
54 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
55    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
56     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
57 * Turn off the Receiver and disconnect all USB devices.
58 * Connect the USB stick with the IRD file to your Receiver
59 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
60   then the installation begins, Only then release the button.
61    Note: If installation does not start , use a different USB stick.
62 * After successfully installing the receiver will reboot and the installed image should start-up
63[[br]]
64[#point8 Top of Page]
65[[br]]
66----
67'''8.064 Atemio6100''' [=#point8.064] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
68----
69'' How do I install an Atemio 6100 Update UBI image? ''
70 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
71 * Extract the zip file
72 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
73    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
74     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
75 * Turn off the Receiver and disconnect all USB devices.
76 * Connect the USB stick with the IRD file to your Receiver
77 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
78   then the installation begins, Only then release the button.
79    Note: If installation does not start , use a different USB stick.
80 * After successfully installing the receiver will reboot and the installed image should start-up
81[[br]]
82[#point8 Top of Page]
83[[br]]
84----
85'''8.065 Atemio6200''' [=#point8.065] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
86----
87'' How do I install an Atemio 6200 Update UBI image? ''
88 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
89 * Extract the zip file
90 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
91    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
92     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
93 * Turn off the Receiver and disconnect all USB devices.
94 * Connect the USB stick with the IRD file to your Receiver
95 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
96   then the installation begins, Only then release the button.
97    Note: If installation does not start , use a different USB stick.
98 * After successfully installing the receiver will reboot and the installed image should start-up
99[[br]]
100[#point8 Top of Page]
101[[br]]
Note: See TracBrowser for help on using the repository browser.