source: wiki/pages/nl/Installation-Recovery-Mips-Beyonwiz @ 43268

Last change on this file since 43268 was 43268, checked in by obi, 7 months ago

reset wiki

File size: 1.4 KB
Line 
1[[TranslatedPages]]
2----
3'''8.071 Beyonwiz''' [=#point8.070] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
4----
5
6
7manufacturer blurb.....
8
9
10----
11'''8.071 Beyonwiz T4''' [=#point8.071] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
12----
13'' How do I install an Beyonwiz T4 Update UBI image? ''
14 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
15 * Extract the zip file
16 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
17    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
18     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
19 * Turn off the Receiver and disconnect all USB devices.
20 * Connect the USB stick with the IRD file to your Receiver
21 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
22   then the installation begins, Only then release the button.
23    Note: If installation does not start , use a different USB stick.
24 * After successfully installing the receiver will reboot and the installed image should start-up
25[[br]]
26[#point8 Top of Page]
27[[br]]
Note: See TracBrowser for help on using the repository browser.