source: wiki/pages/nl/Installation-Recovery-Mips-Golden-Interstar @ 43268

Last change on this file since 43268 was 43268, checked in by obi, 3 months ago

reset wiki

File size: 2.5 KB
Line 
1[[TranslatedPages]]
2----
3'''8.080 Goldern interstar Xpeedlx1/2''' [=#point8.080] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
4----
5
6manufacturer blurb
7
8
9
10----
11'''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
12----
13''How do I install a Xpeedlx1/2 update image? ''
14 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
15 * Extract the zip file
16 * Now copy the unzipped firmware folder "xpeedlx3"  to a formatted FAT32 USB stick.
17    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
18 * Turn off the Receiver and disconnect all USB devices.
19 * Connect the USB stick with the update image file
20 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
21
22Note: If installation does not start, use a different USB stick.
23•After successfully installing the receiver will reboot and the installed image should start-up
24[[br]]
25[#point8 Top of Page]
26[[br]]
27----
28'''8.082 goldern interstar Xpeedlx3''' [=#point8.082] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
29----
30''How do I install a Xpeedlx3 update image? ''
31 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
32 * Extract the zip file
33 * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.
34    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
35 * Turn off the Receiver and disconnect all USB devices.
36 * Connect the USB stick with the update image file
37 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
38
39Note: If installation does not start, use a different USB stick.
40•After successfully installing the receiver will reboot and the installed image should start-up
41[[br]]
42[#point8 Top of Page]
43[[br]]
Note: See TracBrowser for help on using the repository browser.