source: wiki/pages/nl/Installation-Recovery-Mips-Miraclebox @ 40228

Last change on this file since 40228 was 39063, checked in by obi, 7 years ago

reset wiki

File size: 2.7 KB
Line 
1[[TranslatedPages]]
2----
3'''8.090 Miraclebox''' [=#point8.090] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
4----
5
6manufacturer blurb......
7
8
9
10
11
12----
13'''8.091 Miraclebox Ultra''' [=#point8.091] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
14----
15'' How do I install an Miraclebox Ultra Update UBI image? ''
16 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
17 * Extract the zip file
18 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
19    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
20     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
21 * Turn off the Receiver and disconnect all USB devices.
22 * Connect the USB stick with the IRD file to your Receiver
23 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
24   then the installation begins, Only then release the button.
25    Note: If installation does not start , use a different USB stick.
26 * After successfully installing the receiver will reboot and the installed image should start-up
27[[br]]
28[#point8 Top of Page]
29[[br]]
30----
31'''8.092 Miraclebox Mini''' [=#point8.092] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
32----
33'' How do I install an Miraclebox Mini Update UBI image? ''
34 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
35 * Extract the zip file
36 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
37    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
38     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
39 * Turn off the Receiver and disconnect all USB devices.
40 * Connect the USB stick with the IRD file to your Receiver
41 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
42   then the installation begins, Only then release the button.
43    Note: If installation does not start , use a different USB stick.
44 * After successfully installing the receiver will reboot and the installed image should start-up
45[[br]]
46[#point8 Top of Page]
47[[br]]
Note: See TracBrowser for help on using the repository browser.