source: wiki/pages/nl/Installation-Recovery-Mips-Sezam @ 40228

Last change on this file since 40228 was 39063, checked in by obi, 7 years ago

reset wiki

File size: 2.5 KB
Line 
1[[TranslatedPages]]
2----
3'''8.100 Sezam-Marvel''' [=#point8.100] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
4----
5
6manufacturer blurb....
7
8
9
10
11
12----
13'''8.101 Sezam-Marvel''' [=#point8.101] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
14----
15''How do I install a Sezam-Marvel  update image? ''
16 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
17 * Extract the zip file
18 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
19    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
20 * Turn off the Receiver and disconnect all USB devices.
21 * Connect the USB stick with the update image file
22 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
23
24Note: If installation does not start, use a different USB stick.
25•After successfully installing the receiver will reboot and the installed image should start-up
26[[br]]
27[#point8 Top of Page]
28[[br]]
29----
30'''8.102 Sezam-1000HD''' [=#point8.102] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
31----
32''How do I install a Sezam-1000HD  update image? ''
33 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
34 * Extract the zip file
35 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
36    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
37 * Turn off the Receiver and disconnect all USB devices.
38 * Connect the USB stick with the update image file
39 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
40
41Note: If installation does not start, use a different USB stick.
42•After successfully installing the receiver will reboot and the installed image should start-up
43[[br]]
44[#point8 Top of Page]
45[[br]]
Note: See TracBrowser for help on using the repository browser.