1 | [[TranslatedPages]]
|
---|
2 | ----
|
---|
3 | '''SH4 Atemio (Atevio)'''[=#point8.00]
|
---|
4 | ----
|
---|
5 |
|
---|
6 | The SH4 Atemio recievers are manufactured by Fortis who are a Korean manufacturer of satellite receivers all atemio (atevio) models are compatible with TitanNit.
|
---|
7 | as TitanNit was developed for these recievers no bootloader software ID changes are required to install TitanNit, some of these models cam factory supplied with TitanNit such as the atemio 530.
|
---|
8 |
|
---|
9 | '''SH4 Atemio Contents'''
|
---|
10 |
|
---|
11 | * [#point8.001 8.001 Atemio510]
|
---|
12 | * [#point8.002 8.002 Atemio520]
|
---|
13 | * [#point8.003 8.003 Atemio530]
|
---|
14 | * [#point8.004 8.004 Atemio7600]
|
---|
15 | * [#point8.005 8.005 Atevio700]
|
---|
16 | * [#point8.006 8.006 Atevio7000]
|
---|
17 |
|
---|
18 | '''Additional Info'''
|
---|
19 |
|
---|
20 | * [#point8.007 8.007 Uninstallation]
|
---|
21 | * [#point8.008 8.008 Update TitanNit]
|
---|
22 | * [#point8.009 8.009 IRD Download Location]
|
---|
23 |
|
---|
24 |
|
---|
25 |
|
---|
26 | ----
|
---|
27 | '''8.1 Atemio510 and Fortis HS-7810''' [=#point8.001] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
28 | ----
|
---|
29 | '' How do I install an Atemio 510 IRD image? ''
|
---|
30 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
31 | * Extract the zip file
|
---|
32 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
33 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the
|
---|
34 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
35 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
36 | * Turn off the Receiver and disconnect all USB devices.
|
---|
37 | * Connect the USB stick with the IRD file to your Receiver
|
---|
38 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
|
---|
39 | and the installation begins. Only then release the button
|
---|
40 | Note: If installation does not start , use a different USB stick.
|
---|
41 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
42 | [[br]]
|
---|
43 | '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
|
---|
44 | * [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6 iboot sh4 loader flashing and recovery ][[br]]
|
---|
45 | [#point8 Top of Page]
|
---|
46 | [[br]]
|
---|
47 | ----
|
---|
48 | '''8.2 Atemio520''' [=#point8.002] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
49 | ----
|
---|
50 | '' How do I install an Atemio 520 IRD image? ''
|
---|
51 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
52 | * Extract the zip file
|
---|
53 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
54 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the
|
---|
55 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
56 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
57 | * Turn off the Receiver and disconnect all USB devices.
|
---|
58 | * Connect the USB stick with the IRD file to your Receiver
|
---|
59 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
|
---|
60 | and the installation begins. Only then release the button
|
---|
61 | Note: If installation does not start , use a different USB stick.
|
---|
62 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
63 | [[br]]
|
---|
64 | '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
|
---|
65 | * [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6 iboot sh4 loader flashing and recovery ][[br]]
|
---|
66 | [#point8 Top of Page]
|
---|
67 | [[br]]
|
---|
68 | ----
|
---|
69 | '''8.3 Atemio530''' [=#point8.003] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
70 | ----
|
---|
71 | '' How do I install an Atemio 530 IRD image? ''
|
---|
72 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
73 | * Extract the zip file
|
---|
74 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
75 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the
|
---|
76 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
77 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
78 | * Turn off the Receiver and disconnect all USB devices.
|
---|
79 | * Connect the USB stick with the IRD file to your Receiver
|
---|
80 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
|
---|
81 | and the installation begins. Only then release the button
|
---|
82 | Note: If installation does not start , use a different USB stick.
|
---|
83 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
84 | [[br]]
|
---|
85 | [#point8 Top of Page]
|
---|
86 | [[br]]
|
---|
87 | ----
|
---|
88 | '''8.4 Atemio7600 and Fortis HX-8200''' [=#point8.004] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
89 | ----
|
---|
90 | '' How do I install an Atemio 7600 IRD image? ''
|
---|
91 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
92 | * Extract the zip file
|
---|
93 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
94 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the
|
---|
95 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
96 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
97 | * Turn off the Receiver and disconnect all USB devices.
|
---|
98 | * Connect the USB stick with the IRD file to your Receiver
|
---|
99 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
|
---|
100 | and the installation begins. Only then release the button
|
---|
101 | Note: If installation does not start , use a different USB stick.
|
---|
102 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
103 | [[br]]
|
---|
104 | '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
|
---|
105 | * [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6 iboot sh4 loader flashing and recovery ][[br]]
|
---|
106 | [#point8 Top of Page]
|
---|
107 | [[br]]
|
---|
108 | ----
|
---|
109 | '''8.5 Atevio700''' [=#point8.005] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
110 | ----
|
---|
111 | '' How do I install an Atemio 7600 IRD image? ''
|
---|
112 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
113 | * Extract the zip file
|
---|
114 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
115 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the
|
---|
116 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
117 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
118 | * Turn off the Receiver and disconnect all USB devices.
|
---|
119 | * Connect the USB stick with the IRD file to your Receiver
|
---|
120 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
|
---|
121 | and the installation begins. Only then release the button
|
---|
122 | Note: If installation does not start , use a different USB stick.
|
---|
123 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
124 | [[br]]
|
---|
125 | '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
|
---|
126 | * [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6 iboot sh4 loader flashing and recovery ][[br]]
|
---|
127 | [#point8 Top of Page]
|
---|
128 | [[br]]
|
---|
129 | ----
|
---|
130 | '''8.6 Atevio7000 and Fortis FS-9000/9200''' [=#point8.006] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
131 | ----
|
---|
132 | '' How do I install an Atemio 7000 IRD image? ''
|
---|
133 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
134 | * Extract the zip file
|
---|
135 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
136 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the
|
---|
137 | " HP USB Disk Storage Format Tool" (freeware program).
|
---|
138 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
139 | * Turn off the Receiver and disconnect all USB devices.
|
---|
140 | * Connect the USB stick with the IRD file to your Receiver
|
---|
141 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
|
---|
142 | and the installation begins. Only then release the button
|
---|
143 | Note: If installation does not start , use a different USB stick.
|
---|
144 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
145 | [[br]]
|
---|
146 | '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
|
---|
147 | * [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6 iboot sh4 loader flashing and recovery ][[br]]
|
---|
148 | [#point8 Top of Page]
|
---|
149 | [[br]]
|
---|
150 |
|
---|
151 | ----
|
---|
152 | '''8.007 Uninstalling Titan''' [=#point8.007] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
153 | ----
|
---|
154 | If you have an Atemio (Atevio) receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
|
---|
155 |
|
---|
156 |
|
---|
157 | [[br]]
|
---|
158 | [#point8 Top of Page]
|
---|
159 | [[br]]
|
---|
160 |
|
---|
161 | ----
|
---|
162 | '''8.008 Update TitanNit''' [=#point8.008] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
|
---|
163 | ----
|
---|
164 | There are two ways to update your TitanNit version and there are merits to both methods :
|
---|
165 |
|
---|
166 | IRD offline method see above [#point8.00 SH4 Atemio contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
|
---|
167 | [[br]]
|
---|
168 | ''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
|
---|
169 | Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
|
---|
170 |
|
---|
171 | Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
|
---|
172 | [[br]]
|
---|
173 | ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
|
---|
174 | [[br]]
|
---|
175 | [#point8 Top of Page]
|
---|
176 | [[br]]
|
---|
177 |
|
---|
178 | ----
|
---|
179 | '''8.009 IRD Download Locations''' [=#point8.009] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
|
---|
180 | ----
|
---|
181 | * [wiki:Manufactures#point13 13 Manufactures] - [http://atemio.de/index.php/software-updates Stable Images][[br]]
|
---|
182 | * [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]
|
---|
183 |
|
---|
184 | [[br]]
|
---|
185 | [#point8 Top of Page]
|
---|
186 | [[br]]
|
---|