source: wiki/pages/nl/Installation-Recovery-SH4-Homecast @ 40228

Last change on this file since 40228 was 39063, checked in by obi, 7 years ago

reset wiki

File size: 3.4 KB
Line 
1[[TranslatedPages]]
2----
3'''8.020 Homecast''' [=#point8.020] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
4----
5
6Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
7
8'''SH4 Homecast Contents'''
9
10 * [#point8.021 8.021 Homecast pro]
11
12
13'''Additional Info'''
14
15 * [#point8.022 8.022 Uninstallation]
16 * [#point8.023 8.025 Update TitanNit]
17 * [#point8.024 8.024 IRD Download Location]
18
19----
20'''8.021 Homecast Pro''' [=#point8.021] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
21----
22'' How do I install an Homecast UPDATEUSB Image? ''
23 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.2 IRD Download Locations])
24 * Extract the zip file
25 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
26     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
27     " HP USB Disk Storage Format Tool" (freeware program).
28     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
29 * Turn off the Receiver and disconnect all USB devices.
30 * Connect the USB stick with the IMG file to your Receiver
31* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
32    then the installation starts. Only then release the button
33     Note: If installation does not start, use a different USB stick.
34 * The installation is finished when DONE appears on the receiver.
35 * Restart the machine after by the main switch again to .
36[[br]]
37[#point8 Top of Page]
38[[br]]
39
40----
41'''8.022 Uninstalling Titan''' [=#point8.022] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
42----
43If you have an Homecast receiver all you have to do is install your original IMG file as explained above and no bootloader changes are necessary.
44
45[[br]]
46[#point8 Top of Page]
47[[br]]
48
49----   
50'''8.023 Update TitanNit''' [=#point8.023] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
51----
52There are two ways to update your TitanNit version and there are merits to both methods :
53
54IRD offline method see [#point8.020 Homecast Contents] and select your Receiver model to show information on how to update titan using an IRD TitanNit image.
55[[br]]
56''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed.
57Plugins and files installed to MNT or a valid configured storage device will retain there settings .''
58
59Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
60[[br]]
61''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
62[[br]]
63[#point8 Top of Page]
64[[br]]
65
66----   
67'''8.024 IRD Download Locations''' [=#point8.024] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
68----
69
70* [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
71 
72[[br]] 
73[#point8 Top of Page] 
74[[br]]
75
Note: See TracBrowser for help on using the repository browser.