source: wiki/pages/nl/Installation-Recovery-SH4-Katherin @ 43268

Last change on this file since 43268 was 43268, checked in by obi, 3 months ago

reset wiki

File size: 9.0 KB
Line 
1[[TranslatedPages]]
2----
3'''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
4----
5
6Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
7
8'''SH4 Fortis Contents'''
9
10 * [#point8.041 8.041 Kathrein Ufs910]
11 * [#point8.042 8.042 Kathrein Ufs912]
12 * [#point8.043 8.043 Kathrein Ufs913]
13 * [#point8.044 8.044 Kathrein Ufs922]
14 * [#point8.045 8.045 Kathrein Ufs960]
15
16'''Additional Info'''
17
18 * [#point8.046 8.06 Uninstallation]
19 * [#point8.047 8.07 Update TitanNit]
20 * [#point8.048 8.08 IRD Download Location]
21
22----
23'''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
24----
25'' How do I install a Kathrein UFS910 update image? ''
26 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
27 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
28 * Extract the zip file
29 * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick.
30     Note: The USB stick should not be formatted with windows, but a separate program, such as the
31     " HP USB Disk Storage Format Tool" (freeware program).
32     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
33 * Turn off the Receiver and disconnect all USB devices.
34 * Connect the USB stick with the img file to the front USB Port
35 * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds)
36   until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button-
37     Note: If installation does not start, use a different USB stick.
38 * After successfully installing the receiver will reboot and the installed image should start-up
39[[br]]
40[#point8 Top of Page]
41[[br]]
42----
43'''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
44----
45'' How do I install a Kathrein UFS912 update image? ''
46 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
47 * Extract the zip file
48 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ .
49     Note: The USB stick should not be formatted with windows, but a separate program, such as the
50     " HP USB Disk Storage Format Tool" (freeware program).
51     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
52 * Turn off the Receiver and disconnect all USB devices.
53 * Connect the USB stick with the img file
54 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
55   then the installation begins. Only after that message release the -TV/Radio button-
56     Note: If installation does not start, use a different USB stick.
57 * After successfully installing the receiver will reboot and the installed image should start-up
58[[br]]
59[#point8.1 Top of Page]
60[[br]]
61----
62'''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
63----
64'' How do I install a Kathrein UFS913 update image? ''
65 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
66 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
67 * Extract the zip file
68 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
69     Note: The USB stick should not be formatted with windows, but a separate program, such as the
70     " HP USB Disk Storage Format Tool" (freeware program).
71     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
72 * Turn off the Receiver and disconnect all USB devices.
73 * Connect the USB stick with the img file
74 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
75   then the installation begins. Only after that message release the -TV/Radio button-
76     Note: If installation does not start, use a different USB stick.
77 * After successfully installing the receiver will reboot and the installed image should start-up
78[[br]]
79[#point8.1 Top of Page]
80[[br]]
81----
82'''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
83----
84'' How do I install a Kathrein UFS922 update image? ''
85 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
86 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
87 * Extract the zip file
88 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
89     Note: The USB stick should not be formatted with windows, but a separate program, such as the
90     " HP USB Disk Storage Format Tool" (freeware program).
91     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
92 * Turn off the Receiver and disconnect all USB devices.
93 * Connect the USB stick with the img file
94 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
95   then the installation begins. Only after that message release the -TV/Radio button-
96     Note: If installation does not start, use a different USB stick.
97 * After successfully installing the receiver will reboot and the installed image should start-up
98[[br]]
99[#point8 Top of Page]
100[[br]]
101----
102'''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
103----
104'' How do I install a Kathrein UFS960 update image? ''
105 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
106 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
107 * Extract the zip file
108 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ .
109     Note: The USB stick should not be formatted with windows, but a separate program, such as the
110     " HP USB Disk Storage Format Tool" (freeware program).
111     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
112 * Turn off the Receiver and disconnect all USB devices.
113 * Connect the USB stick with the img file
114 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
115   then the installation begins. Only after that message release the -TV/Radio button-
116     Note: If installation does not start, use a different USB stick.
117 * After successfully installing the receiver will reboot and the installed image should start-up
118[[br]]
119[#point8 Top of Page]
120[[br]]
121
122----
123'''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
124----
125If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
126
127[[br]]
128[#point8 Top of Page]
129[[br]]
130
131----   
132'''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
133----
134There are two ways to update your TitanNit version and there are merits to both methods :
135
136IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
137[[br]]
138''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
139Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
140
141Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
142[[br]]
143''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
144[[br]]
145[#point8 Top of Page]
146[[br]]
147
148----   
149'''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
150----
151[http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
152 
153[[br]] 
154[#point8 Top of Page] 
155[[br]]
Note: See TracBrowser for help on using the repository browser.