source: wiki/pages/nl/Installation-Recovery-SH4-Spark @ 43268

Last change on this file since 43268 was 43268, checked in by obi, 5 months ago

reset wiki

File size: 4.6 KB
Line 
1[[TranslatedPages]]
2----
3'''8.051 SPARK''' [=#point8.050] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
4----
5
6Spark is a reseller of the Fulan Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized hardware.
7
8'''SH4 Spark Contents'''
9
10 * [#point8.051 8.051 SPARK (7111)]
11 * [#point8.052 8.052 SPARK (7162)]
12
13'''Additional Info'''
14
15
16 * [#point8.053 8.053 Uninstallation]
17 * [#point8.054 8.054 Update TitanNit]
18 * [#point8.055 8.055 IRD Download Location]
19
20
21
22----
23'''8.051 SPARK (7111)''' [=#point8.051] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
24----
25'' How do I install a Spark (7111) Update Image? ''
26  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
27  * Extract the zip file
28  * Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2"
29     Note: The USB stick should not be formatted with windows, but a separate program, such as the
30     " HP USB Disk Storage Format Tool" (freeware program).
31     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
32  * Turn off the device.
33  * Connect the USB stick with the update file
34  * hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears,
35    then the installation will begin, when you see "U LD" in the display release the "OK" button.
36      Note: If the installation does not start, use a different USB stick.
37  * After installation "SUCC" appears in the display boot the receiver and the new image should appear.
38[[br]]
39[#point8.050 Top of Page]
40[[br]]
41----
42'''8.052 SPARK7162''' [=#point8.052] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
43----
44'' How do I install a Spark (7162) Update Image? ''
45  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
46  * Extract the zip file
47  * Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2"
48     Note: The USB stick should not be formatted with windows, but a separate program, such as the
49     " HP USB Disk Storage Format Tool" (freeware program).
50     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
51  * Turn off the device.
52  * Connect the USB stick with the update file
53  * hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears,
54    then the installation will begin, when you see "U LD" in the display release the "OK" button.
55      Note: If the installation does not start, use a different USB stick.
56  * After installation "SUCC" appears in the display boot the receiver and the new image should appear.
57[[br]]
58[#point8.050 Top of Page]
59[[br]]
60
61----
62'''8.053 Uninstalling Titan''' [=#point8.053] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
63----
64If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
65
66[[br]]
67[#point8.050 Top of Page]
68[[br]]
69
70----   
71'''8.054 Update TitanNit''' [=#point8.054] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
72----
73There are two ways to update your TitanNit version and there are merits to both methods :
74
75IRD offline method see [#point8 Installation / Recovery] and select your Receiver model to show information on how to update titan using an IRD TitanNit image.
76[[br]]
77''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed.
78Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
79
80Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
81[[br]]
82''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
83[[br]]
84[#point8.050 Top of Page]
85[[br]]
86
87----   
88'''8.055 IRD Download Locations''' [=#point8.055] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
89----
90[http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
91 
92[[br]] 
93[#point8.050 Top of Page] 
94[[br]]
Note: See TracBrowser for help on using the repository browser.