Line | |
---|
1 | [[TranslatedPages]]
|
---|
2 | ----
|
---|
3 | '''8.071 Beyonwiz''' [=#point8.070] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
4 | ----
|
---|
5 |
|
---|
6 |
|
---|
7 | manufacturer blurb.....
|
---|
8 |
|
---|
9 |
|
---|
10 | ----
|
---|
11 | '''8.071 Beyonwiz T4''' [=#point8.071] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
|
---|
12 | ----
|
---|
13 | '' How do I install an Beyonwiz T4 Update UBI image? ''
|
---|
14 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
|
---|
15 | * Extract the zip file
|
---|
16 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
|
---|
17 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
|
---|
18 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
19 | * Turn off the Receiver and disconnect all USB devices.
|
---|
20 | * Connect the USB stick with the IRD file to your Receiver
|
---|
21 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
|
---|
22 | then the installation begins, Only then release the button.
|
---|
23 | Note: If installation does not start , use a different USB stick.
|
---|
24 | * After successfully installing the receiver will reboot and the installed image should start-up
|
---|
25 | [[br]]
|
---|
26 | [#point8 Top of Page]
|
---|
27 | [[br]]
|
---|
Note: See
TracBrowser
for help on using the repository browser.