1 | [[TranslatedPages]]
|
---|
2 | ----
|
---|
3 | '''8.080 Goldern interstar Xpeedlx1/2''' [=#point8.080] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
|
---|
4 | ----
|
---|
5 |
|
---|
6 | manufacturer blurb
|
---|
7 |
|
---|
8 |
|
---|
9 |
|
---|
10 | ----
|
---|
11 | '''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
|
---|
12 | ----
|
---|
13 | ''How do I install a Xpeedlx1/2 update image? ''
|
---|
14 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
|
---|
15 | * Extract the zip file
|
---|
16 | * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.
|
---|
17 | Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
18 | * Turn off the Receiver and disconnect all USB devices.
|
---|
19 | * Connect the USB stick with the update image file
|
---|
20 | * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
|
---|
21 |
|
---|
22 | Note: If installation does not start, use a different USB stick.
|
---|
23 | •After successfully installing the receiver will reboot and the installed image should start-up
|
---|
24 | [[br]]
|
---|
25 | [#point8 Top of Page]
|
---|
26 | [[br]]
|
---|
27 | ----
|
---|
28 | '''8.082 goldern interstar Xpeedlx3''' [=#point8.082] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
|
---|
29 | ----
|
---|
30 | ''How do I install a Xpeedlx3 update image? ''
|
---|
31 | * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
|
---|
32 | * Extract the zip file
|
---|
33 | * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.
|
---|
34 | Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
|
---|
35 | * Turn off the Receiver and disconnect all USB devices.
|
---|
36 | * Connect the USB stick with the update image file
|
---|
37 | * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
|
---|
38 |
|
---|
39 | Note: If installation does not start, use a different USB stick.
|
---|
40 | •After successfully installing the receiver will reboot and the installed image should start-up
|
---|
41 | [[br]]
|
---|
42 | [#point8 Top of Page]
|
---|
43 | [[br]]
|
---|