Changeset 29572 for wiki


Ignore:
Timestamp:
08/04/14 21:21:12 (10 years ago)
Author:
aafsvn
Message:

[titan] autoupdate wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed
  • wiki/pages/en/Installation-Recovery

    r28192 r29572  
    1515 * [#point8.5 8.5 Atemio700 and compatible Models]
    1616 * [#point8.6 8.6 Atemio7000 and compatible Models]
    17  * [#point8.8 8.7 Ufs910]
    18  * [#point8.9 8.8 Ufs912]
    19  * [#point8.10 8.9 Ufs922]
     17 * [#point8.7 8.7 Ipbox91 and compatible Models]
     18 * [#point8.8 8.8 Ipbox900 and compatible Models]
     19 * [#point8.9 8.9 Ipbox910 and compatible Models]
     20 * [#point8.10 8.10 Ipbox9000 and compatible Models]
     21 * [#point8.11 8.11 Ufs910]
     22 * [#point8.12 8.12 Ufs912]
     23 * [#point8.13 8.13 Ufs913]
     24 * [#point8.14 8.14 Ufs922]
    2025
    2126'''MIPS Models'''
    2227
    23  * [#point8.14 8.10 Atemio5000]
    24  * [#point8.15 8.11 Atemio5200]
     28 * [#point8.20 8.20 Atemio5000]
     29 * [#point8.21 8.21 Atemio5200]
    2530
    2631'''Aditional Info'''
    2732 
    28  * [#point8.11 8.12 Installation on other Fortis Receivers]
    29  * [#point8.12 8.13 Uninstallation On other Fortis Receivers]
    30  * [#point8.13 8.14 Update TitanNit]
    31  * [#point8.14 8.15 IRD Download Location]
     33 * [#point8.30 8.30 Installation on other Fortis Receivers]
     34 * [#point8.31 8.31 Uninstallation On other Fortis Receivers]
     35 * [#point8.32 8.32 Update TitanNit]
     36 * [#point8.33 8.33 IRD Download Location]
    3237[[br]]
    3338[[br]]
     
    154159[#point8.1 Top of Page]
    155160[[br]]
    156 
    157 ----
    158 '''8.7 Kathrein Ufs910''' [=#point8.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     161----
     162'''8.7 Ipbox91''' [=#point8.7] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     163----
     164'' How do I install an Ipbox 91 UPDATEUSB Image? ''
     165 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     166 * Extract the zip file
     167 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
     168     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     169     " HP USB Disk Storage Format Tool" (freeware program).
     170     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     171 * Turn off the Receiver and disconnect all USB devices.
     172 * Connect the USB stick with the IMG file to your Receiver
     173* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
     174    then the installation starts. Only then release the button
     175     Note: If installation does not start, use a different USB stick.
     176 * The installation is finished when DONE appears on the receiver.
     177 * Restart the machine after by the main switch again to .
     178[[br]]
     179
     180[[br]]
     181----
     182'''8.8 Ipbox900''' [=#point8.8] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     183----
     184'' How do I install an Ipbox 900 UPDATEUSB Image? ''
     185 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     186 * Extract the zip file
     187 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
     188     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     189     " HP USB Disk Storage Format Tool" (freeware program).
     190     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     191 * Turn off the Receiver and disconnect all USB devices.
     192 * Connect the USB stick with the IMG file to your Receiver
     193* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
     194    then the installation starts. Only then release the button
     195     Note: If installation does not start, use a different USB stick.
     196 * The installation is finished when DONE appears on the receiver.
     197 * Restart the machine after by the main switch again to .
     198
     199[[br]]
     200----
     201'''8.9 Ipbox910''' [=#point8.9] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     202----
     203'' How do I install an Ipbox 910 UPDATEUSB Image? ''
     204 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     205 * Extract the zip file
     206 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
     207     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     208     " HP USB Disk Storage Format Tool" (freeware program).
     209     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     210 * Turn off the Receiver and disconnect all USB devices.
     211 * Connect the USB stick with the IMG file to your Receiver
     212* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
     213    then the installation starts. Only then release the button
     214     Note: If installation does not start, use a different USB stick.
     215 * The installation is finished when DONE appears on the receiver.
     216 * Restart the machine after by the main switch again to .
     217
     218[[br]]
     219----
     220'''8.10 Ipbox9000''' [=#point8.10] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     221----
     222'' How do I install an Ipbox 9000 UPDATEUSB Image? ''
     223 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     224 * Extract the zip file
     225 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
     226     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     227     " HP USB Disk Storage Format Tool" (freeware program).
     228     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     229 * Turn off the Receiver and disconnect all USB devices.
     230 * Connect the USB stick with the IMG file to your Receiver
     231* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
     232    then the installation starts. Only then release the button
     233     Note: If installation does not start, use a different USB stick.
     234 * The installation is finished when DONE appears on the receiver.
     235 * Restart the machine after by the main switch again to .
     236
     237
     238----
     239'''8.11 Kathrein Ufs910''' [=#point8.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    159240----
    160241'' How do I install a Kathrein UFS910 update image? ''
     
    177258
    178259----
    179 '''8.8 Kathrein UFS912''' [=#point8.8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     260'''8.12 Kathrein UFS912''' [=#point8.12] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    180261----
    181262'' How do I install a Kathrein UFS912 update image? ''
     
    197278
    198279----
    199 '''8.9 Kathrein UFS922''' [=#point8.9] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    200 ----
    201 '' How do I install a Kathrein UFS922 update image? ''
     280'''8.13 Kathrein UFS913''' [=#point8.13] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     281----
     282'' How do I install a Kathrein UFS913 update image? ''
    202283 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
    203284 * Visit the AAF digital forum and download the latest TitanNit firmware .
     
    216297[#point8.1 Top of Page]
    217298[[br]]
     299
     300----
     301'''8.14 Kathrein UFS922''' [=#point8.14] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     302----
     303'' How do I install a Kathrein UFS922 update image? ''
     304 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
     305 * Visit the AAF digital forum and download the latest TitanNit firmware .
     306 * Extract the zip file
     307 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
     308     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     309     " HP USB Disk Storage Format Tool" (freeware program).
     310     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     311 * Turn off the Receiver and disconnect all USB devices.
     312 * Connect the USB stick with the img file
     313 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
     314   then the installation begins. Only after that message release the -TV/Radio button-
     315     Note: If installation does not start, use a different USB stick.
     316 * After successfully installing the receiver will reboot and the installed image should start-up
     317[[br]]
     318[#point8.1 Top of Page]
     319[[br]]
    218320[[br]]
    219321[[br]]
     
    221323'''Mips Models'''
    222324----
    223 '''8.10 Atevio5000''' [=#point8.10] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     325'''8.20 Atevio5000''' [=#point8.20] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    224326----
    225327'' How do I install an Atemio 5000 Update UBI image? ''
     
    240342
    241343----
    242 '''8.11 Atevio5200''' [=#point8.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     344'''8.21 Atevio5200''' [=#point8.21] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    243345----
    244346'' How do I install an Atemio 5200 Update UBI image? ''
     
    263365'''Aditional Info'''
    264366----
    265 '''8.12 installation on other Fortis Receivers'''  [=#point8.12] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     367'''8.30 installation on other Fortis Receivers'''  [=#point8.30] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    266368----
    267369'''Installation Notes:'''
     
    346448[#point8.1 Top of Page]
    347449----
    348 '''8.13 Uninstalling Titan''' [=#point8.13] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     450'''8.31 Uninstalling Titan''' [=#point8.31] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    349451----
    350452If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
     
    371473
    372474----   
    373 '''8.14 Update TitanNit''' [=#point8.14] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
     475'''8.32 Update TitanNit''' [=#point8.32] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
    374476----
    375477There are two ways to update your TitanNit version and there are merits to both methods :
     
    380482Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
    381483
    382 Image Online Method see [wiki:System-Update#point3.5.7 System aktualisieren] for information on how preform an online update.
     484Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
    383485[[br]]
    384486''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
     
    388490
    389491----   
    390 '''8.15 IRD Download Locations''' [=#point8.15] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
     492'''8.33 IRD Download Locations''' [=#point8.33] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
    391493----
    392494* [wiki:Manufactures#point13 13 Manufactures] - [http://atemio.de/index.php/software-updates Stable Images][[br]] 
Note: See TracChangeset for help on using the changeset viewer.