Ignore:
Timestamp:
Mar 17, 2016, 11:04:29 AM (4 years ago)
Author:
aafsvn
Message:

[titan] autoupdate wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed
  • wiki/pages/ru/Installation-Recovery

    r37379 r37380  
    22'''8 Installation and Recovery Contents''' [=#point8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    33----
     4
     5[[br]]
     6
    47This section contains information on installation and removal of TitanNit from your receiver
    5 {{{#!div style="width: 1100px; margin: auto"
    6  {{{#!table style="border: none"
    7   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    8   {{{#!div style="float: left"
    9 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Atemio.png, 60px,align=left,link=http://www.atemio.de Atemio homepage)]]
    10   }}}
    11   '''SH4 Atemio'''[[br]]
    12   {{{#!div style="float: left
    13  [http://www.atemio.de Atemio homepage]
    14  * [wiki:Installation-Recovery-SH4-Atemio#point8.000 Contents]
    15  * [wiki:Installation-Recovery-SH4-Atemio#point8.001 Atemio510]
    16  * [wiki:Installation-Recovery-SH4-Atemio#point8.002 Atemio520]
    17  * [wiki:Installation-Recovery-SH4-Atemio#point8.003 Atemio530]
    18  * [wiki:Installation-Recovery-SH4-Atemio#point8.004 Atemio7600]
    19  * [wiki:Installation-Recovery-SH4-Atemio#point8.005 Atemio700]
    20  * [wiki:Installation-Recovery-SH4-Atemio#point8.006 Atemio7000]
    21   }}}
    22   }}}
    23   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    24   {{{#!div style="float: left"
    25 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Fortis.png, 60px,align=left,link=http://www.fortis.co.kr Fortis homepage)]]
    26   }}}
    27   '''SH4 Fortis'''[[br]]
    28    {{{#!div style="float: left
    29  [http://www.fortis.co.kr Fortis homepage]
    30  * [wiki:Installation-Recovery-SH4-Fortis#point8.010 Contents]
    31  * [wiki:Installation-Recovery-SH4-Fortis#point8.011 Fortis Clone]
    32  * [wiki:Installation-Recovery-SH4-Fortis#point8.012 Bootloader Installation]
    33  * [wiki:Installation-Recovery-SH4-Fortis#point8.013 Fortis FS-9000]
    34  * [wiki:Installation-Recovery-SH4-Fortis#point8.014 Fortis FS-9200]
    35  * [wiki:Installation-Recovery-SH4-Fortis#point8.015 Fortis HS-9510]
    36  * [wiki:Installation-Recovery-SH4-Fortis#point8.016 Fortis HX-8200]
    37  * [wiki:Installation-Recovery-SH4-Fortis#point8.017 Fortis HS-7810]
    38   }}}
    39   }}}
    40  {{{#!td align=center valign=top style="border: none; font-size: 115%"
    41   {{{#!div style="float: left"
    42 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/homecast.png, 60px,align=left,link=http://www.myhomecast.nl Homecast homepage)]]
    43   }}}
    44   '''SH4 Homecast'''[[br]]
    45  {{{#!div style="float: left
    46  [http://www.myhomecast.nl Homecast homepage]
    47  * [wiki:Installation-Recovery-SH4-Homecast#point8.020 Contents]
    48  * [wiki:Installation-Recovery-SH4-Homecast#point8.021 Homecast Pro]
    49   }}}
    50   }}}
    51   |----
    52   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    53   {{{#!div style="float: left"
    54 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/IPBox.png, 60px,align=left,link=http://www.abipbox.com/ AB IPBox homepage)]]
    55   }}}
    56   '''SH4 IPBox'''[[br]]
    57   {{{#!div style="float: left
    58  [http://www.abipbox.com/ AB IPBox homepage]
    59  * [wiki:Installation-Recovery-SH4-IPBox#point8.030 Contents]
    60  * [wiki:Installation-Recovery-SH4-IPBox#point8.031 Ipbox91]
    61  * [wiki:Installation-Recovery-SH4-IPBox#point8.032 Ipbox900]
    62  * [wiki:Installation-Recovery-SH4-IPBox#point8.033 Ipbox910]
    63  * [wiki:Installation-Recovery-SH4-IPBox#point8.034 Ipbox9000]
    64   }}}
    65   }}}
    66   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    67   {{{#!div style="float: left"
    68 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/kathrein.png, 60px,align=left,link=http://www.kathrein-gmbh.at kathrein homepage)]]
    69   }}}
    70   '''SH4 Katherin'''[[br]]
    71   {{{#!div style="float: left
    72  [http://www.kathrein-gmbh.at kathrein homepage]
    73  * [wiki:Installation-Recovery-SH4-Katherin#point8.040 Contents]
    74  * [wiki:Installation-Recovery-SH4-Katherin#point8.041 Ufs910]
    75  * [wiki:Installation-Recovery-SH4-Katherin#point8.042 Ufs912]
    76  * [wiki:Installation-Recovery-SH4-Katherin#point8.043 Ufs913]
    77  * [wiki:Installation-Recovery-SH4-Katherin#point8.044 Ufs922]
    78  * [wiki:Installation-Recovery-SH4-Katherin#point8.045 Ufc960]
    79   }}}
    80   }}}
    81   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    82   {{{#!div style="float: left"
    83 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Spark.png, 60px,align=left,link=http://www.spark-tv.com Spark homepage)]]
    84   }}}
    85   '''SH4 Spark'''[[br]]
    86   {{{#!div style="float: left
    87  [http://www.spark-tv.com Spark homepage]
    88  * [wiki:Installation-Recovery-SH4-Spark#point8.050 Contents]
    89  * [wiki:Installation-Recovery-SH4-Spark#point8.051 Spark7111]
    90  * [wiki:Installation-Recovery-SH4-Spark#point8.052 Spark7162]
    91   }}}
    92   }}}
    93   |----
    94  {{{#!td align=center valign=top style="border: none; font-size: 115%"
    95   {{{#!div style="float: left"
    96 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Atemio.png, 60px,align=left,link=http://www.atemio.de Atemio homepage)]]
    97   }}}
    98   '''Mips Atemio'''[[br]]
    99   {{{#!div style="float: left
    100  [http://www.atemio.de Atemio homepage]
    101  * [wiki:Installation-Recovery-Mips-Atemio#point8.060 Contents]
    102  * [wiki:Installation-Recovery-Mips-Atemio#point8.061 Atemio5000 AKA Nemesis]
    103  * [wiki:Installation-Recovery-Mips-Atemio#point8.062 Atemio5200]
    104  * [wiki:Installation-Recovery-Mips-Atemio#point8.063 Atemio6000]
    105  * [wiki:Installation-Recovery-Mips-Atemio#point8.064 Atemio6100]
    106  * [wiki:Installation-Recovery-Mips-Atemio#point8.065 Atemio6200]
    107   }}}
    108   }}}
    109   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    110   {{{#!div style="float: left"
    111 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/beyonwiz.png, 60px,align=left,link=http://www.beyonwiz.com.au Beyonwiz homepage)]]
    112   }}}
    113   '''Mips Beyonwiz'''[[br]]
    114  {{{#!div style="float: left
    115  [http://www.beyonwiz.com.au Beyonwiz homepage]
    116 
    117  * [wiki:Installation-Recovery-Mips-Beyonwiz#point8.070 Contents]
    118  * [wiki:Installation-Recovery-Mips-Beyonwiz#point8.071 BeyonwizT4]
    119   }}}
    120   }}}
    121   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    122   {{{#!div style="float: left"
    123 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Goldern_Interstar.png, 60px,align=left,link=http://www.golden-interstar.pl Golden Interstar homepage)]]
    124   }}}
    125   '''Mips Golden Interstar'''[[br]]
    126   {{{#!div style="float: left
    127  [http://www.golden-interstar.pl Golden Interstar homepage]
    128  * [wiki:Installation-Recovery-Mips-Golden-Interstar#point8.080 Contents]
    129  * [wiki:Installation-Recovery-Mips-Golden-Interstar#point8.081 Xpeedlx1/2]
    130  * [wiki:Installation-Recovery-Mips-Golden-Interstar#point8.082 Xpeedlx3]
    131   }}}
    132   }}}
    133   |----
    134   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    135   {{{#!div style="float: left"
    136 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Miraclebox.png, 60px,align=left,link=http://www.miraclebox.se miraclebox homepage)]]
    137   }}}
    138   '''Mips Miraclebox[[br]]
    139   {{{#!div style="float: left
    140  [http://www.miraclebox.se Miraclebox homepage]
    141  * [wiki:Installation-Recovery-Mips-Miraclebox#point8.090 Contents]
    142  * [wiki:Installation-Recovery-Mips-Miraclebox#point8.091 MBUltra]
    143  * [wiki:Installation-Recovery-Mips-Miraclebox#point8.092 MBMini]
    144 }}}
    145 }}}
    146   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    147   {{{#!div style="float: left"
    148 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Sezam.png, 60px,align=left,link=http://www.sezam-club.ru/ homepage)]]
    149   }}}
    150   '''Mips Sezam'''[[br]]
    151  {{{#!div style="float: left
    152  [http://www.sezam-club.ru/ Mips Sezam homepage]
    153  * [wiki:Installation-Recovery-Mips-Sezam#point8.100 Contents]
    154  * [wiki:Installation-Recovery-Mips-Sezam#point8.101 Sezam-Marvel]
    155  * [wiki:Installation-Recovery-Mips-Sezam#point8.102 Sezam-1000HD]
    156   }}}
    157   }}}
    158 }}}
    159 }}}
     8
     9[[br]]
     10
     11 * [#point8.1 8.1 Atemio510 and compatible Models]
     12 * [#point8.2 8.2 Atemio520 and compatible Models]
     13 * [#point8.3 8.3 Atemio530 and compatible Models]
     14 * [#point8.4 8.4 Atemio7600 and compatible Models]
     15 * [#point8.5 8.5 Atemio700 and compatible Models]
     16 * [#point8.6 8.6 Atemio7000 and compatible Models]
     17 * [#point8.7 8.7 Ufs910]
     18 * [#point8.8 8.8 Ufs912]
     19 * [#point8.9 8.9 Ufs922]
     20 * [#point8.10 8.10 Installation on other Fortis Receivers]
     21 * [#point8.11 8.11 Uninstallation On other Fortis Receivers]
     22 * [#point8.12 8.12 Update TitanNit]
     23 * [#point8.13 8.13 IRD Download Location]
     24
     25
     26[[br]]
     27
     28
     29----
     30'''8.1 Atemio510''' [=#point8.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     31----
     32
     33[[br]]
     34
     35'' How do I install an Atemio 510 IRD image? ''
     36 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware .
     37 * Extract the zip file
     38 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     39     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     40     " HP USB Disk Storage Format Tool" (freeware program).
     41     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     42 * Turn off the Receiver and disconnect all USB devices.
     43 * Connect the USB stick with the IRD file to your Receiver
     44 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
     45   and the installation begins. Only then release the button
     46     Note: If installation does not start , use a different USB stick.
     47 * After successfully installing the receiver will reboot and the installed image should start-up
     48[[br]]
     49[#point8.1 Top of Page]
     50----
     51'''8.2 Atemio520''' [=#point8.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     52----
     53
     54[[br]]
     55
     56'' How do I install an Atemio 520 IRD image? ''
     57 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware .
     58 * Extract the zip file
     59 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     60     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     61     " HP USB Disk Storage Format Tool" (freeware program).
     62     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     63 * Turn off the Receiver and disconnect all USB devices.
     64 * Connect the USB stick with the IRD file to your Receiver
     65 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
     66   and the installation begins. Only then release the button
     67     Note: If installation does not start , use a different USB stick.
     68 * After successfully installing the receiver will reboot and the installed image should start-up
     69[[br]]
     70[#point8.1 Top of Page]
     71
     72----
     73'''8.3 Atemio530''' [=#point8.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     74----
     75
     76[[br]]
     77'' How do I install an Atemio 530 IRD image? ''
     78 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware .
     79 * Extract the zip file
     80 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     81     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     82     " HP USB Disk Storage Format Tool" (freeware program).
     83     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     84 * Turn off the Receiver and disconnect all USB devices.
     85 * Connect the USB stick with the IRD file to your Receiver
     86 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
     87   and the installation begins. Only then release the button
     88     Note: If installation does not start , use a different USB stick.
     89 * After successfully installing the receiver will reboot and the installed image should start-up
     90[[br]]
     91[#point8.1 Top of Page]
     92
     93----
     94'''8.4 Atemio7600''' [=#point8.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     95----
     96
     97[[br]]
     98'' How do I install an Atemio 7600 IRD image? ''
     99 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware .
     100 * Extract the zip file
     101 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     102     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     103     " HP USB Disk Storage Format Tool" (freeware program).
     104     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     105 * Turn off the Receiver and disconnect all USB devices.
     106 * Connect the USB stick with the IRD file to your Receiver
     107 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
     108   and the installation begins. Only then release the button
     109     Note: If installation does not start , use a different USB stick.
     110 * After successfully installing the receiver will reboot and the installed image should start-up
     111[[br]]
     112[#point8.1 Top of Page]
     113
     114----
     115'''8.5 Atevio700''' [=#point8.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     116----
     117
     118[[br]]
     119
     120'' How do I install an Atemio 700 IRD image? ''
     121 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware .
     122 * Extract the zip file
     123 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     124     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     125     " HP USB Disk Storage Format Tool" (freeware program).
     126     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     127 * Turn off the Receiver and disconnect all USB devices.
     128 * Connect the USB stick with the IRD file to your Receiver
     129 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
     130   and the installation begins. Only then release the button
     131     Note: If installation does not start , use a different USB stick.
     132 * After successfully installing the receiver will reboot and the installed image should start-up
     133[[br]]
     134[#point8.1 Top of Page]
     135
     136----
     137'''8.6 Atevio7000''' [=#point8.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     138----
     139
     140[[br]]
     141
     142'' How do I install an Atemio 7000 IRD image? ''
     143 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware .
     144 * Extract the zip file
     145 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     146     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     147     " HP USB Disk Storage Format Tool" (freeware program).
     148     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     149 * Turn off the Receiver and disconnect all USB devices.
     150 * Connect the USB stick with the IRD file to your Receiver
     151 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
     152   and the installation begins. Only then release the button
     153     Note: If installation does not start , use a different USB stick.
     154 * After successfully installing the receiver will reboot and the installed image should start-up
     155[[br]]
     156[#point8.1 Top of Page]
     157
     158----
     159'''8.7 Kathrein Ufs910''' [=#point8.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     160----
     161
     162[[br]]
     163
     164'' How do I install a Kathrein UFS910 update image? ''
     165 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
     166 * Visit the AAF digital forum and download the latest TitanNit firmware .
     167 * Extract the zip file
     168 * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick.
     169     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     170     " HP USB Disk Storage Format Tool" (freeware program).
     171     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     172 * Turn off the Receiver and disconnect all USB devices.
     173 * Connect the USB stick with the img file to the front USB Port
     174 * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds)
     175   until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button-
     176     Note: If installation does not start, use a different USB stick.
     177 * After successfully installing the receiver will reboot and the installed image should start-up
     178[[br]]
     179[#point8.1 Top of Page]
     180
     181----
     182'''8.8 Kathrein UFS912''' [=#point8.8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     183----
     184
     185[[br]]
     186
     187'' How do I install a Kathrein UFS912 update image? ''
     188 * Visit the AAF digital forum and download the latest TitanNit firmware .
     189 * Extract the zip file
     190 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ .
     191     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     192     " HP USB Disk Storage Format Tool" (freeware program).
     193     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     194 * Turn off the Receiver and disconnect all USB devices.
     195 * Connect the USB stick with the img file
     196 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
     197   then the installation begins. Only after that message release the -TV/Radio button-
     198     Note: If installation does not start, use a different USB stick.
     199 * After successfully installing the receiver will reboot and the installed image should start-up
     200[[br]]
     201[#point8.1 Top of Page]
     202
     203----
     204'''8.9 Kathrein UFS922''' [=#point8.9] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     205----
     206
     207[[br]]
     208
     209'' How do I install a Kathrein UFS922 update image? ''
     210 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
     211 * Visit the AAF digital forum and download the latest TitanNit firmware .
     212 * Extract the zip file
     213 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
     214     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     215     " HP USB Disk Storage Format Tool" (freeware program).
     216     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     217 * Turn off the Receiver and disconnect all USB devices.
     218 * Connect the USB stick with the img file
     219 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
     220   then the installation begins. Only after that message release the -TV/Radio button-
     221     Note: If installation does not start, use a different USB stick.
     222 * After successfully installing the receiver will reboot and the installed image should start-up
     223[[br]]
     224[#point8.1 Top of Page]
     225
     226
     227----
     228'''installation on other Fortis Receivers'''  [=#point8.10] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     229----
     230
     231[[br]]
     232
     233'''Installation Notes:'''
     234
     235''If you wish to try or install titan you need to install an Atemio/Atevio factory loader. The original Atemio Bootloader has a security code within so an installation of Titan is not possible with any other fortis loader''
     236
     237''If you wish to install Titan the loader version must be 1.54 or above. Titan versions above 1.32 require the new Iboot loader which needs to be installed first if not present.''
     238
     239''There are various ways that are explained below:''
     240 
     241[[br]]
     242
     243'''AAF Recovery Tool (ART) method'''
     244
     245 * Install the AAF Recovery Tool (ART) and set up a connection to your receiver
     246 * Set the IP address and subnet mask of your uboot environment.
     247 * Reboot the receiver and reconnect to change the settings.
     248 * Install the factory loader and reboot.
     249 * The factory loader you installed is version 1.21 that you have to update to 1.54 to be compatible with Titan
     250 * Visit the [http:((www-atemio.de Atemio] homepage or the [http://www.aaf-digital.info/forum AAF digital forum] and download the latest Atevio/Atemio loaader (1.54).
     251 * Extract the zip file
     252  * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     253     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     254     "HP USB Disk Storage Format Tool" (freeware program).
     255     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     256 * Turn off the receiver and disconnect all USB devices.
     257 * Connect the USB stick with the IRD file to your receiver
     258 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
     259   and the installation begins. Only then release the button
     260     Note: Should the installation not start, try a different USB stick.
     261 * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.
     262
     263''You may now install Titan''
     264[[br]]
     265
     266
     267[[br]]
     268
     269'''Cross Flash Method'''
     270
     271''This method explains how to install the HDF bootloader flash plugin to your fortis receiver and flash an Atemio/Atevio compatible bootloader from the plugin menu.''
     272
     273* Download the HDF Bootloader flash plugin from the [http://www.aaf-digital.info/forum AAF Digital forum].
     274 * Extract the zip file
     275 * Now copy the unzipped Plugin folder to a formatted FAT32 USB stick.
     276     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     277     " HP USB Disk Storage Format Tool" (freeware program).
     278     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     279 * go to the plugins section in your receiver and install the plugin and then start it.
     280 * type in the password contained in the zip file and follow the onscreen prompts.
     281 * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.
     282
     283''You may now install TitanNit''
     284
     285[[br]]
     286
     287'''Reseller Changer Tool Method'''
     288
     289''This method explains how to change the Reseler ID of an Atemio/Atevio compatible bootloader and flash it to any compatible Fortis receiver from the plugin menu.''
     290
     291
     292* Visit the [http://www.atemio.de Atemio] homepage or the [http://www.aaf-digital.info/forum AAF digital forum] and download the latest Atevio/Atemio loader.
     293 * Extract the zip file
     294 * use the reseller ID changer tool and change the IRD to that of your reseller ID.
     295 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     296     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     297     " HP USB Disk Storage Format Tool" (freeware program).
     298     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     299 * Turn off the Receiver and disconnect all USB devices.
     300 * Connect the USB stick with the IRD file to your Receiver.
     301 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
     302   and the installation begins. Only then release the button
     303     Note: If installation does not start , use a different USB stick.
     304 * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.
     305
     306
     307This method requires you to also change the reseller ID to be able to install TitanNit.
     308
     309
     310'''Be aware should it the installation fail or a loss of Power occur during the flashing process you could brick your receiver as there is no recovery method. Compatibility with other receivers is not guaranteed but you may find a list of compatible receivers in the [wiki:Supported-Receivers#point7 Supported Receivers] section.'''
     311[[br]]
     312[#point8.1 Top of Page]
     313----
     314'''8.11 Uninstalling Titan'' [=#point8.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     315----
     316[[br]]
     317
     318If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
     319
     320Uninstalling titan and switching back to the original reseller loader can't be done (easily) for other fortis receivers but there is one simple alternative method outlined below.
     321
     322
     323'''Uninstalling Titan on non Atemio/Atevio receiver and restore Reseller ID with Maxi-uboot'''
     324
     325If you have iboot installed then you must install a version of TitanNit older than 1.32 before using this method.
     326
     327This will install the factory Atemio loader that is compatible with the AAF Recovery Tool (ART) to be able to install the Maxiuboot Loader.
     328
     329In order for this method to work make sure the setting Allow __"Iboot Update"__ is enabled in [wiki:Remote-Device-Control#point4.6 Iboot].
     330
     331When successfully achieved you may start up ART from your PC and install Maxiuboot.
     332
     333[[br]]
     334
     335Once installed you may set up your bootargs and change your Reseller ID back to its factory settings. For flashin original Firmware or other Software please refere to your receivers' manual or instructions.
     336[[br]]
     337[#point108.1 Top of Page]
    160338
    161339
    162340----   
    163 '''8.113 IRD Download Locations''' [=#point8.113] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
    164 ----
     341'''8.13 Update TitanNit[=#point8.12] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
     342---- 
     343[[br]] 
     344
     345There are two ways to update your TitanNit version and there are merits to both methods :
     346
     347IRD offline method see [#point8 Installation / Recovery Inhaltsverzeichnis] and select your Reciever model to show information on how to update titan using an IRD titannit image.
     348[[br]]
     349''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
     350Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
     351
     352Image Online Method see [wiki:System-Update#point3.5.7 System aktualisieren] for information on how preform an online update.
     353[[br]]
     354''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
     355
     356[[br]]
     357
     358[#point8 Top of Page]
     359
     360[[br]]
     361
     362----   
     363'''8.13 IRD Download Locations'' [=#point8.13] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
     364---- 
     365[[br]] 
     366
    165367* [wiki:Manufactures#point13 13 Manufactures] - [http://atemio.de/index.php/software-updates Stable Images][[br]] 
    166368* [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
    167 
    168   '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
    169 * [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6  iboot sh4 loader flashing and recovery ][[br]] 
    170369 
    171370[[br]] 
    172371[#point8 Top of Page] 
     372[[br]] 
     373[[br]] 
    173374[[br]]
    174 
    175 
    176 
    177 
    178 
Note: See TracChangeset for help on using the changeset viewer.