Changeset 37661 for wiki/pages/vn
- Timestamp:
- 06/07/16 23:07:11 (8 years ago)
- Location:
- wiki/pages/vn
- Files:
-
- 92 edited
Legend:
- Unmodified
- Added
- Removed
-
wiki/pages/vn/AV-Settings
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.6.1 AV Settings''' [=#point3.6.1] ([wiki:Interface-Operation#point3.6 Settings (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/AV-Settings.jpg)]][[BR]]8 >9 > here you can setup your audio and visual settings.10 11 [[br]]12 13 ||'''Resolution (Default)''' ||Set the default resolution of the decoder.||14 ||'''Resolution Current:''' ||Shows the current resolution of the decoder.||15 ||'''Auto Resolution:''' ||Do you want the EPG file to be deleted after being read.||16 ||'''Policy:''' ||If the image does not suit the screen format what method shuld the decoder use to best fill the display.||17 ||'''Aspect:''' ||Set the aspect ratio of the display.||18 ||'''Colour Format''' ||Set the colour format of the hdmi output.||19 ||'''Colour Format Scart/ Composite:''' ||Set the colour format of the composite and scart output.||20 ||'''Audio Source:''' ||Select the audio source format.||21 ||'''Ac3 Default:''' ||Do you wish for the default audio format to be AC3.||22 ||'''Ac3 Mode:''' ||Set the output conversion format of the AC3 stream.||23 ||'''Audio Delay:''' ||Set the delay or advance time of the audio signal to sync it with the video signal.||24 ||'''Inc AC3 Audio in %:''' ||Increace ac3 audio volume in % of total volume.||25 ||'''3D Mode:''' ||Output the tv signal in side by side or vertical 3d format.||26 ||'''two step mute:''' ||Set the default function of the mute button lower volume then mute or just mute.||27 ||'''automatic restart last subtitle:''' ||load the last used subtitle when playing back a recording or stream.||28 ||'''Sound ampflier (tv modus/ internal player)''' ||Increace the volume amplification when watching tv or using the default media player.||29 ||'''Sound ampflier (external player)''' ||Increace the volume amplification when using a third party media player.||30 31 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.32 33 34 35 [[br]] -
wiki/pages/vn/About
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''About''' [=#point3.70.3] ([wiki:Interface-Operation#point103.70 Information (Back)])([wiki:Wiki#point0.2 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/about.jpg)]][[BR]]7 >8 > here you fiew information about the installed titan image.9 10 [[br]] -
wiki/pages/vn/Adaptor-Settings
r37567 r37661 1 [[TranslatedPages]]2 3 >----4 >'''3.5.4.1 Adaptor Settings''' [=#point3.5.4.1] ([#point3.5.1 network (Back])5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Adaptor-Settings.jpg)]]br]]8 >9 Here you can check and adjust the settings for your Eithernet Interface.10 11 [[br]]12 13 '''Coloured Button's Functions"14 15 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the settings menu.16 please see below for more info on the functions of these buttons:.17 18 ||'''Red Button: (Edit)''' ||This will bring up the edit interface dialogue of the selected Eithernet interface.||19 ||'''Green Button: (Hostname)''' ||This will bring up the Hostname dialogue allowing you to edit the host name of the reciever.|| -
wiki/pages/vn/Atemio-Hotline
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.5 Atemio (hotline)''' [=#point3.7.5] ([wiki:Interface-Operation#point3.7 Information (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Atemio_Hotline.jpg)]][[BR]]8 >9 > here you can view contact info from atemio.10 11 [[br]]12 -
wiki/pages/vn/Audio-Player
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.2.1 Audio Player''' [=#point3.2.1] ([wiki:Interface-Operation#point3.2 Media Center (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Audio_Player.jpg)]][[BR]]8 >9 > here you can play music.10 11 [[br]]12 13 ----14 '''Coloured Button's Functions'''15 16 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.17 please see below for more info on the functions of these buttons:.18 19 ||'''Red Button: (Sorting)''' ||Set the sort method for the files listed in the file list display.||20 ||'''Green Button: (Filelist-Mode)''' ||Switch between filelist mode and playlist mode.||21 ||'''Yellow Button: (Random)''' ||select random play mode.||22 ||'''Blue Button: (Repeat)''' ||Select Repeat play mode.||23 ||'''Menu Button: (Menu)''' ||This will show an advanced settings menu for the media player see below for more info on the functions contained with in this menu.||24 25 ----26 '''Advanced Media Player Menu'''27 28 [[br]]29 30 Audio:31 ||'''Sort:''' ||Set the sort method for the files listed in the file list display.||32 ||'''View:''' ||Switch between filelist mode and playlist mode.||33 ||'''MediaDB Autoscan:''' ||Auto scan MediaDb in Background.||34 ||'''Autostart Playlist:''' ||select the autostart Playlist.||35 ||'''Default Directory:''' ||Set the default directory to display when the media player opens.||36 ||'''Use Last Directory:''' ||open the last used directory when the media player opens.||37 38 39 '''Coloured Button's Functions'''40 41 42 ||'''Red Button: (Network)''' ||opens the network menu screen||43 ||'''Green Button: (Edit)''' ||Edit Mode||44 ||'''Yellow Button: (Screensaver)''' ||opens the screensaver menu||45 46 ----47 -
wiki/pages/vn/Audio-Video-Sat
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.18.2 Audio/ Video/ Sat''' [=#point3.5.18.2] ([wiki:Auto-Start-Settings#point3.5.18 Autostart Settings (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Autostart_Settings-Audio-Video-Sat.jpg)]][[br]]8 >9 Here you can check and adjust the video audio and satellite autostart settings.10 11 [[br]]12 13 ||'''Bootlogo:''' ||show the boot logo on startup.||14 ||'''Boot RGB Fix:''' ||apply the startup rgb display output mode.||15 ||'''No Audio Sync:''' ||Don't wait for the audio buffer to fill before starting the audio stream.||16 ||'''HighSR:''' ||??.||17 ||'''Load stmdvb.ko with swts option''' ||???.||18 ||'''Load stmdvb.ko with Camrouting option''' ||???.||19 20 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes. -
wiki/pages/vn/Blind-Scan-Settings
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.1.6 Blind Scan Settings''' [=#point3.5.1.6] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/Blind-Scan-Settings.jpg)]][[br]]7 >8 Here you can proform a blind scan.9 10 [[br]]11 12 ||'''Tuner type''' ||Select the recption tuner type.||13 ||'''Minimal Frequency:''' ||Set the mimimum frequency to scan for during blind scan.||14 ||'''Maximum Frequency:''' ||Set the maximum frequency to scan for during blind scan.||15 ||'''Step Frequency:''' ||Set the step size of the frequency in mhz from the start frequency to scan.||16 ||'''Minimal Signalrate:''' ||Set the minimum Signal rate to scan for during blind scan.||17 ||'''Maximum Signalrate''' ||Set the Maximum Signal rate to scan for during blind scan.||18 ||'''Step Signalrate''' ||Set the brightness of the led when the system is in standby.||19 ||'''Use only standard forward error correction (FEC)''' ||???.||20 ||'''DVB-S Services Only:''' ||Scan only for SD channels.||21 ||'''Only Default FEC:''' ||???.||22 23 ''note: not all these options are relavant or shown and it depend's on the selected tuner type''24 25 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.26 -
wiki/pages/vn/Blue-Button
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.6.5 Blue Button''' [=#point3.6.5] ([wiki:Interface-Operation#point3.60 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Blue_Button.jpg)]][[BR]]8 >9 >here you can configure what happens with the press of the blue button10 11 12 [[br]] -
wiki/pages/vn/CPU
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6.1 CPU''' [=#point3.7.8.6.1] ([wiki:System-Infos#point3.7.8.6 System Infos (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/CPU.jpg)]][[br]]7 >8 Here you can view the detailed cpu info.9 10 [[br]]11 12 13 [[br]] -
wiki/pages/vn/Change-Feed
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.4.2 Change Feed''' [=#point3.4.2] ([wiki:Interface-Operation#point3.4 Extentions (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Change_Feed.jpg)]][[BR]]8 >9 >here you can sett up an aditional feed to obtain extra plugins not found in the online library10 11 [[br]] -
wiki/pages/vn/Channel-Edit
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.6.15 Channel Edit''' [=#point3.6.15] ([wiki:Interface-Operation#point3.6 Settings (Back)])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Channel_Edit.jpg)]][[BR]]8 >9 >here you can edit your channel data10 11 12 [[br]]13 14 ||'''Copy Service:''' ||Enable channel copy mode, this enables the user to copy channels to another boquet.||15 ||'''Remove Service:''' ||Enable channel remove mode, this enables the user to remove channels from the currently selected boquet.||16 ||'''Move Service:''' ||Enable channel move mode, this enables the user to move channels to another boquet.||17 ||'''Protect Service:''' ||Enable channel protect mode, this enables the user to pin protect seletcted channels in the currently selected boquet.||18 ||'''Rename Service:''' ||Enable channel rename mode, this enables the user to copy channels to another boquet.||19 ||'''Sort Service:''' || selecting this will sort all channels in all boquets by alphebitac order.||20 ||'''Set Start Channel:''' ||Here you can set the channel you wish for the receiver to show on startup.||21 ||'''Delete Start Channel:''' ||Here you can remove the currently selected startup channel that shows on startup.||22 23 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes. -
wiki/pages/vn/Child-Safety
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.18.5 Child Safety''' [=#point3.5.18.5] ([wiki:Auto-Start-Settings#point3.5.18 Autostart Settings (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Autostart_Settings-child_safety.jpg)]][[br]]8 >9 Here you can adjust the lock settings on startup.10 11 [[br]]12 13 ||'''Parental:''' ||Enable lock on startup.||14 ||'''Pin:''' ||Select the pin number for the lock on startup.||15 16 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.17 18 [[br]] -
wiki/pages/vn/Common-Interface
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.2 Common Interface''' [=#point3.5.2] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/system-Common_Interface.jpg)]][[BR]]8 >9 >here you can set up your installed cam devices.10 11 [[br]]12 13 Picture:14 ||'''Module Type:''' ||Set the module service type (multiple/ Single Service).||15 16 To __"Store"__ the settings Exit from the Common Interface Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.17 18 [[br]]19 ----20 21 '''Coloured Button's Functions"22 23 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the Commom Interface menu.24 please see below for more info on the functions of these buttons:.25 26 ||'''Red Button: (Reset)''' ||This will reset the selected Common Interface Module.||27 ||'''Green Button: (Menu)''' ||This will Bring up the advanced Common Interface menu.||28 ||'''Yellow Button: (CAID)''' ||???.||29 ||'''Blue Button: (Channel)''' ||Select the channels the selected CA Module will Decode.||30 ||'''Menu Button: (Setting)''' ||This will show the settings for the selected CA Module.||31 32 -
wiki/pages/vn/Community
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''14 Community''' [=#point14] ([wiki:English-Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 [[br]]7 8 The TitanNit project is supported 24 hours in the public forum.9 10 For help and support feel free to join us on our forum11 12 ||= '''[http://www.aaf-digital.info/forum/forum.php AAF Digital Forum]''' =||13 ||= [[Image(http://www.aaf-digital.info/images/logo.jpg,400,link=http://www.aaf-digital.info/forum/forum.php)]] =||14 15 [[br]] -
wiki/pages/vn/Configure
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.5.3 Hard Disk Configure''' [=#point3.5.5.3] ([wiki:Hard-Disk#point3.5.5 hard disk (Back)])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/Configure.jpg)]][[br]]7 >8 Here you can configure your harddisk see below for more information.9 Note that you must enable ([wiki:Adjust#point3.6.7 Expertmode]) to show all available configure options in this display.10 [[br]]11 12 [[br]]13 14 ||'''Use as recordings-device''' ||Prepair the storage device for use as a recording medium.||15 ||'''Remove recordings-device''' ||disable the use of the storage device as a recording medium.||16 ||'''Use as plugins-device''' ||Prepair the storage device for use as a plugins medium.||17 ||'''Remove extentions-device''' ||disable the use of the storage device as a extentions medium.||18 ||'''Use as swap-device''' ||Prepair the storage device for use as a swap medium.||19 ||'''Remove swap-device''' ||disable the use of the storage device as a swap medium.||20 ||'''Use as backup-device''' ||Prepair the storage device for use as a backup medium.||21 ||'''Remove backup-device''' ||disable the use of the storage device as a backup medium.||22 23 24 25 26 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.27 28 29 30 [[br]] -
wiki/pages/vn/Default-Autostart
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.18.1 Default Autostart''' [=#point3.5.18.1] ([wiki:Auto-Start-Settings#point3.5.18 Autostart Settings (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/Autostart_Settings-default_Autostart.jpg)]][[br]]8 >9 Here you can check and adjust the startup settings.10 11 [[br]]12 13 ||'''Bootstop:''' ||???.||14 ||'''Debug:''' ||Here you can set the debug mode and adjust the complexicity of the log output.||15 ||'''Show IP:''' ||Scan for a Media Highway version 2 EPG stream during EPG scan.||16 ||'''Updatelist:''' ||??.||17 18 To __"Store"__ the settings Exit from this Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.19 -
wiki/pages/vn/Development
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''11 Development''' [=#point11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 === Plugins Building ===7 8 '''Preparation'''9 10 In the current tdt git http://gitorious.org/open-duckbox-project-sh4 you can now build TitanNit plugins.11 I have installed 2 plugins that are intended to serve as an example. One can then download and unzip this locally and build your own plugins.12 13 With a fresh clone of the git14 15 {{{16 make yaud-enigma2-nightly17 }}}18 19 after it completes, then20 21 {{{22 make titanium-plugins23 }}}24 25 [[br]] -
wiki/pages/vn/Disclaimer
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''17 Generic Disclaimer''' [=#point17] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 TitanNit is a Semi closed source setop box linux based operating system software. The services provided by AAF Digital including (including developer tools, resources, download areas, files, source code, product information, documentation, communication forums, bug tracker, wiki, internet, streaming, forum etc. all collectively called "services") that the TitanNit Project, its members, and websites provide are for the purpose of providing support to the community and aditional functionality from the original system software provided by the manufactures of the supported hardware.7 The services provided bt the AAF digital team is provided “as is”, "with all faults", and "as available" basis, without warranty of any kind, either express or implied. Your use of these services is at your own risk. TitanNit disclaims all warranties.8 9 TitanNit disclaims liability for any direct, indirect, incidental, special, consequential, exemplary, punitive or other damages, or lost profits, that may result directly or indirectly from the use of these services and any material that is downloaded or obtained through the use of these services.10 11 This includes, without limitation, any damage to computer systems, hardware or software, loss of data, or any other performance failures, any errors, bugs, viruses or other defects that result from, or are associated with the use of these services.12 13 None of the contributors, sponsors, administrators, or anyone else connected with TitanNit in any way whatsoever can be responsible for the appearance of any inaccurate or libelous information or for your use of the information contained in or linked from these services.14 15 AAF Digital reserve the right to to remove and add services as they see fit without warning.16 17 18 19 '''No contract, limited license'''20 21 22 Please make sure that you understand that these services is being provided freely, and that no kind of agreement or contract is implied between the owners or users of these services, the owners of the servers upon which it is housed, the individual contributors to these services, any project administrators, sysops or anyone else who is in any way connected with the project subject to your claims against them directly. You are being granted a limited license to copy or install anything from this site; it does not create or imply any contractual or extracontractual liability on any of it's agents, members, organizers or other users. Neither is anyone responsible should someone change, edit, modify or remove any information contained with in these services.23 24 25 26 '''Trademarks'''27 28 29 Any of the trademarks, service marks, collective marks, design rights or similar rights that are mentioned, used or cited in the services provided for TitanNit are the property of their respective owners. Their use in any "service" does not imply that you may use them for any other purpose other than for the same or a similar use as contemplated by the original authors concent.30 the AAF Digital team will make due effort to outline the services that are provided by other's and give them credit where aplicable.31 32 33 '''Information and Content'''34 35 36 Publication of information found in any of the services provided for TitanNit may be in violation of the laws of the country or jurisdiction from where you are viewing this information. The servers providing these services are located in different locations of the world and is maintained in reference to the protections afforded under local and federal law in respect to their location. Laws in your country or jurisdiction may not protect or allow the same kinds of speech or distribution. the AAF digital team does not encourage the violation of any laws; and cannot be responsible for any violations of such laws, should you link to the domain of the websites of these services or use, reproduce, or republish the information contained therein.37 38 39 '''Final Remarks'''40 41 42 Enjoy TitanNit and the other services provided by AAF Digital and thanks for selecting us!43 -
wiki/pages/vn/EPG-Search
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.1.4 EPG Search''' [=#point3.1.4] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/Epg_Search.jpg)]][[BR]]7 >8 EPG Search is where you can search the EPG title, discription genra for specific keywords to search for programs to set up Recordings.9 10 [[br]]11 12 '''Coloured and Extra Button's Functions"13 14 The __"Coloured and Extra Buttons"__ along the bottom of the display bring up additional menus and options with in the Search EPG menu.15 please see below for more info on the functions of these buttons:.16 17 ||'''Red Button: (Timer)''' ||This will bring up the recording timer menu to set up a timer.||18 ||'''Green Button: (Title)''' ||This will search the EPG title string for text you specify and bring up a list of matches where you may press the red button to set up a timer.||19 ||'''Yellow Button: (Discription)''' ||This will search the EPG Discription string for text you specify and bring up a list of matches where you may press the red button to set up a timer.||20 ||'''Blue Button: (All)''' ||This will search all EPG string for text you specify and bring up a list of matches where you may press the red button to set up a timer.||21 ||'''Menu (Genre):''' ||This will search the EPG Genre string for text you specify and bring up a list of matches where you may press the red button to set up a timer.||22 23 For information on setting up a timer Recording using the red button see ([WikiStart#point103.10.6 Records]) for more info. -
wiki/pages/vn/EPG-Settings
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.6.11 EPG Settings''' [=#point3.6.11] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/EPG_Settings.jpg)]][[BR]]8 >9 >Here you can change your epg settings.10 11 [[br]]12 13 14 ||'''EPG Path''' ||Set to any Path you want where the EPG File should be stored (on Receivers with little Memory it is strongly recommended to extend it by using a USB Pen-Drive or Harddisk)||15 ||'''How Many Days:''' ||The Number of Days in Advance of the EPG to store (I recommend no higher than 8 Days)||16 ||'''Delete EPG after read:''' ||Do you want the EPG file to be deleted after being read.||17 ||'''EPG Save Mode:''' ||When should the EPG Data be stored to the storage medium. Caution: Should you not use a Pen Drive or Harddisk for EPG Storage set to Never, as Receivers with little Memory on Board tend to crash due to Insufficient free space.||18 ||'''Show EPG Screen (EPG Button):''' ||Which EPG format should be shown on EPG Key-press on the Remote.||19 ||'''EPG Free Space (kb):''' ||Total of minimal Free Memory that should be kept on the medium where the epg is stored to aviod free space errors.||20 ||'''EPG List Mode:''' ||What Channels should be scanned in the background (Only for twin Receivers) for EPG (scan)(whitelist) (scanlist and whitelist) (deactivate (disable scan)).||21 ||'''EPG Scan Time:''' ||Here you can set the time of the automatic EPG scan. The Scan will be performed every Day at that set time. Should the Receiver be in Deep Stand-by it will "wake up" aprox. 5 Minutes before the scan is due to start.||22 ||'''EPG Button in EPG:''' ||Behavior of the EPG Button during EPG display.||23 ||'''Grafic EPG Zoom:''' ||Sets the zoom level of the EPG to show more or less of a time span of the shown programs.||24 ||'''Grafic EPG Picons:''' ||Set to yes to use picons or the alternative Picon sets in the infobar and EPG stored in /var/media/autofs/sda1/swapextensions/usr/local/share/titan/picons/ directory.||25 ||'''Delete EPG Before Scan:''' ||Should the EPG be deleted before a the timed scan.||26 ||'''After EPG Scan:''' ||Behavior after the EPG scan is completed EPG scan: Nothing (Stand-By) or Switch Off (Deep Stand-By).||27 ||'''MHW EPG:''' ||Scan for a Media Highway EPG stream during EPG scan.||28 ||'''MHW2 EPG:''' ||Scan for a Media Highway version 2 EPG stream during EPG scan.||29 ||'''OpenTV EPG:''' ||Scan for an OpenTV EPG stream during EPG scan.||30 31 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.32 33 [[br]]34 ----35 36 '''Coloured Button's Functions"37 38 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.39 please see below for more info on the functions of these buttons:.40 41 ||'''Red Button: (EPG Reset)''' ||This will reset the saved epg removing all program data.||42 ||'''Green Button: (Edit)''' ||On a customisable item this will bring up editor to edit a value or text string.||43 ||'''Yellow Button: (Scanlist)''' ||Brings up the epg scan list and you may from there add aditional boquets to be scaned during an epg scan.||44 ||'''Blue Button: (log)''' ||This will show you the past scan log history for the epg.||45 -
wiki/pages/vn/EPG-Short-View
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.1.1 EPG Short View''' [=#point3.1.1] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/EPG_Short_View.jpg)]][[BR]]8 >9 10 EPG Short View is a small easy to read horozontal epg of the current displayed channel including the infomation on the program you may scroll using the direction arrows to a future time.11 [[br]] -
wiki/pages/vn/External-Software
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''9 External Software''' [=#point9] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 External Software is a collection of tools to supplement TitanNit.7 8 This is a list of applications that can be use with or for to manipulate or control your Receiver.9 [[br]]10 Below is a list of external applications please select a link below for more information.11 12 13 14 {{{#!div style="width: 1100px; margin: auto"15 {{{#!table style="border: none"16 {{{#!td align=center valign=top style="border: none; font-size: 115%"17 {{{#!div style="float: left"18 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/TiMote.png,align=left,link=[wiki:External-Software-TiMote#point9.1 9.1 TiMote (Android)])]]19 }}}20 '''[wiki:External-Software-TiMote#point9.1 9.1 TiMote (Android)]'''[[br]]21 {{{#!div style="float: left22 Timote is an andriod application for streaming and control of TitanNit23 }}}24 }}}25 {{{#!td align=center valign=top style="border: none; font-size: 115%"26 {{{#!div style="float: left"27 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/TiView.png,align=left,link=[wiki:External-Software-TiView#point9.2 9.2 TiView (PC)])]]28 }}}29 '''[wiki:External-Software-TiView#point9.2 9.2 TiView (PC)]'''[[br]]30 {{{#!div style="float: left31 TiView is an PC application for streaming and control of TitanNit32 }}}33 }}}34 {{{#!td align=center valign=top style="border: none; font-size: 115%"35 {{{#!div style="float: left"36 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/SatChannelListEditor.png,align=left,link=[wiki:External-Software-SatChannelListEditor#point9.3 9.3 SatChannelListEditor])]]37 }}}38 '''[wiki:External-Software-SatChannelListEditor#point9.3 9.3 SatChannelListEditor]'''[[br]]39 {{{#!div style="float: left40 SatChannelListEditor is an PC application for manipulation of your TitanNit channel data.41 }}}42 }}}43 |----44 {{{#!td align=center valign=top style="border: none; font-size: 115%"45 {{{#!div style="float: left"46 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/E2WebIFAPI.png,align=left,link=[wiki:External-Software-E2WebIfAPI#point9.4 9.4 E2WebIfAPI])]]47 }}}48 '''[wiki:External-Software-E2WebIfAPI#point9.4 9.4 E2WebIfAPI]'''[[br]]49 {{{#!div style="float: left50 E2WebIfAPI is an console application to support the dreambox xml web interface commands.51 }}}52 }}}53 {{{#!td align=center valign=top style="border: none; font-size: 115%"54 {{{#!div style="float: left"55 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/TitanEditor.png,align=left,link=[wiki:External-Software-TitanEditor#point9.5 9.5 TitanEditor])]]56 }}}57 '''[wiki:External-Software-TitanEditor#point9.5 9.5 TitanEditor]'''[[br]]58 {{{#!div style="float: left59 TitanEditor is an PC application for manipulation of dreambox channel data to work on of your TitanNit Receiver.60 }}}61 }}}62 {{{#!td align=center valign=top style="border: none; font-size: 115%"63 {{{#!div style="float: left"64 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/TitanNitLanguageEditor.png,align=left,link=[wiki:External-Software-TitanNitLanguageEditor#point9.6 9.6 TitanNitLanguageEditor])]]65 }}}66 '''[wiki:External-Software-TitanNitLanguageEditor#point9.6 9.6 TitanNitLanguageEditor]'''[[br]]67 {{{#!div style="float: left68 TitanLanguageEditor is an PC application for editing GUI language translations.69 }}}70 }}}71 }}}72 }}} -
wiki/pages/vn/External-Software-E2WebIfAPI
r37567 r37661 1 [[TranslatedPages]]2 '''9.4 E2WebIfAPI''' [=#point9.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])3 4 5 == Introduction ==6 Enigma2 Web Interface ( WebIf ) API was defined for Dreambox .7 It is a protocol that allows you to control a Dreambox via HTTP requests.8 9 Typical control tasks are :10 11 * Programming (timer) and playing back recordings12 * Live streaming (TV and radio)13 * EPG functions (display, search)14 * Remote control (Remote Control)15 16 You can find a good overview of the E2WebIFAPI in the [http://dream.reichholf.net/wiki/Enigma2:WebInterface DreamboxWIKI].17 18 == Motivation ==19 20 For TitanNit the Android App [wiki:External-Software-TiMote#point109.1 9.1 TiMote] was developed. Anybody with an Android Smart-Phone or Tablet with this software installed can control their receiver or watch TV on the Android device. Isn't that cool?21 22 But owners of an iOS-device (i-Phone or i-Pad) are unlucky as there is no iOS TitanNit compatable web client such as TiMote. You can control your receiver via http protocol (same as Web Interface) but you wont be able to use all advantages like tiMote on an Android Platform.23 24 On the other hand iOS and Android Apps already exist for Dreambox receivers. These Apps are based on the Enigma2 protocol. Couldn't one just use that App on iOS instead of developing a new App?25 26 == The solution ==27 TitanNit has its own protocol but is not compatible to the Enigma2 WebIf. Following a short analysis it was discovered that converting E2 requests to Titan didn't seem so difficult. Therefore, an E2 web server (e2webserv) was developed, which implements the Enigma2 WebIf. This server receives the E2 requests, delegates the calls to TitanNit web server and the responses is converted back into the XML format, which is expected from the E2 client.28 29 This way the TitanNit receiver is able to correspond to existing E2 - client software.30 31 32 == Requirements ==33 34 * The Web server must be enabled on the receiver35 * The E2webserv must be installed on the receiver36 37 == IOS Apps ==38 39 The following apps are installed on my iPad2:40 * dreaMote41 * DreaMote Lite42 * e2RemoteHD43 * Dreambox Live44 45 Should you not want to purchase any apps from the Apps-Store I can recommend dreaMote Lite .46 47 In addition to the app you need a player.48 49 I have tried the following players, which work well for me:50 * Good Player51 * BUZZ Player52 * OPlayerHD Lite53 * VLC Player54 55 VLC and OPlayerHD Lite are free.56 57 == XBMC ==58 59 If you are running the Media Center software [http://xbmc.org/ XBMC] or [http://xbmc4xbox.org.uk/ XBMC4XBOX], you can connect your Titan receiver via the Live-TV-Plugin VU+.60 XBMC runs on Windows PCs aswell as Linux and is also available for Raspberry Pi and the Xbox.61 62 == VLC ==63 Having installed the e2webserv you can enjoy Live-Streaming on your Windows or Linux PC using [http://www.videolan.org/vlc/ VLC] (no further software needed).64 65 You do not have to switch channels manually it all happens automatically. In order for this to take place you need an M3U playlist. You can easily generate the playlist by your Favourites and save to your PC. Having done so you only need to open the M3U list in VLC and select the desired channel.66 67 How do you export a particular favourites list into an M3U file?68 69 Enter the address in your Web browser.70 71 Example (favourite is "Polish"):72 73 [http://192.168.1.1:8080/web/services.m3u?bRef=Polish]74 75 Enter your receivers IP address and where names of Favourites have spaces within these spaces must be replaced with "%20".76 77 Example (favourite is "My TV" Receiver - IP: 192.168.0.10):78 79 [http://192.168.0.10:8080/web/services.m3u?bRef=Mein%20TV]80 81 Client Configuration == ==82 Please configure the E2-clientas accordingly:83 * IP address of the receiver84 * Port: 808085 * Streaming Port: 800186 87 Please note that SSL is not supported.88 89 Below you see an example configuration for dreaMote.90 91 [[Image(DreaMote.png,384px)]]92 93 == E2webserv.conf ==94 95 You must alter the server configuration manually. Using standard configured TitanNit no alterration on the e2webserv.conf should be neccessary.96 97 Should you have installed the plugin to Flash the configuration file '''e2webserv.conf''' lies in the directory '''/mnt/swapextensions/etc'''98 99 Here is the content:100 {{{101 # E2 web port102 port = 8080103 # E2 data port104 data port = 8001105 # Titan web port106 titanium- port = 80107 # Titan data port108 titan data port = 22222109 # Titan host (change it if e2webserv is not running locally on the receiver)110 titan host = 127.0.0.1111 # Automatic switching of channels112 # It is useful if you do not want manually switch a channel on receiver with a single tuner.113 # If it is set to false and you have a single tuner you can stream the only channels located114 # On the same transponder as the current channel active on the receiver .115 Autozap = true116 # Log output file117 logFile = /tmp/e2webserv.log118 # Maximum log file size in KB. Set it to 0 (default 10KB) to disable logging (maximum allowed value is 1024).119 # When the file limit is reached a backup of the current file is created .120 # It Means maximally 2 x MaxLogSize KB will be used.121 MaxLogSize = 10122 # Thread pool size (1 through 8)123 threadpool = 2124 # Directory where the transponder and bouquet files are located.125 # You do not need to Specify it, it will be Automatically Discovered .126 # But if you you start e2webserv not on the receiver (but eg on your Linux server or Windows computer) then you127 # Shoulderstand copy the settings (channel, transponder, provider and all bouquets file) and here Specify the location on the local computer .128 titanDir = /mnt/settings129 }}}130 131 == Links ==132 133 * Enigma2 Web API in [http://www.aaf-digital.info/forum/showthread.php?90948-Enigma2-Web-API-f % FCr - TitanNit AAF Forum]134 * Sources on [https://github.com/gswiatek/e2api4titan GitHub]135 [[br]]136 [[br]] -
wiki/pages/vn/External-Software-SatChannelListEditor
r37567 r37661 1 [[TranslatedPages]]2 '''9.3 SatChannelListEditor''' [=#point9.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])3 4 This manual applies to version 5.4 of SatChannelListEditor (SCLE). In future releases,[[br]]5 possibly new features will be added, making the screen shots of this program obsolete.6 7 == Requirements ==8 SCLE has been programmed for the runtime environment " Microsoft. NET Framework ".[[br]]9 Currently .NET Framework version 2.0 or higher is required.10 11 ( also take a look at [http://en.wikipedia.org/wiki/.NET_Framework Wikipedia article . NET Framework] )12 13 == Windows ==14 * In Windows XP .NET Framework version 2.0, 3.0 or 3.5 must be installed.[[br]]15 (3.0 and 3.5 are extended versions include version 2.0)16 * For Windows Vista and Windows 7 the .NET Framework librarys are implemented[[br]]17 in the operating system and do not need to be installed seperately.18 * In Windows 8 .NET Framework 3.5 must be installed. As Windows 8 by default,[[br]]19 only includes .NET framework 4.5, which is not compatible with SCLE20 == Linux ==21 In Linux, the Mono framework is required (see [http://en.wikipedia.org/wiki/Mono_(software)Wikipedia article about Mono project]) .22 [[BR]] You may have to install WinForms libraries manually with "apt -get install libmono- winforms * "23 [[BR]] You may then run SCLE from the command line with the command "mono SatChannelListEditor.exe ".24 25 == Mac OS ==26 In Mac OS , just like Linux, the Mono-Framework is required to to run SCLE.27 28 == The first startup ==29 After the first startup of SCLE the language is set to English and the receiver[[br]]30 model " UFS -821 " is selected. You now have to set the language and your[[br]]31 Receiver model to suite your receiver.32 33 Select the receiver and its System you like to manage.34 35 == Setting the receiver model and type of operating system ==36 Select the menu under " Options ", select " Settings" :37 38 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/3.png)]]39 40 Select Titan in the window that appears as the receiver you wish to connect to:41 42 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/4.png)]]43 44 After selecting the reciever type under the option " Titan " set the IP address of your Receiver, before[[br]]45 you close the window confirm the settings by clicking the OK button.[[br]]46 The other settings on this page should not be changed.47 48 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/5.png)]]49 50 == Download and upload the channel list ==51 52 After the Receiver model and the IP address have been set, you can fetch the channel[[br]]53 list from your Receiver (Download) and after processing send it back to the Receiver (upload).54 [[BR]] Use the Buttons in the Menubar of SCLE or in the Drop-down Menu:55 56 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/6.png)]]57 58 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/7.png)]]59 60 When you start an upload or download the program will automatically change to[[br]]61 the message window where status messages are displayed for file transfer.62 63 == Edit the channel list ==64 65 == Favourites ==66 67 All TV and Radio channels are displayed in the tab "TV" and "Radio" in the main window[[br]]68 of SCLE. Normally there are several hundreds or thousands of channels in this list.69 [[BR]] To simplify navigation on your Receiver you may add the channels to more than one Favourites list.[[br]]70 The Favourites also determine the channel number for easier and direct access with your remote control.71 [[BR]] Create new favourites by clicking the right mouse button within the tree of favourites:72 73 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/8.png)]]74 75 After creating the new Favourites entry assign the desired Name:76 77 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/9.png)]]78 79 You may now add channels to your favourites by drag & drop of the channels[[br]]80 onto the Favourites entry or by clicking the right mouse button on the desired channel[[br]]81 and selecting Add to Favourites and selecting the Favourites Entry from the drop-down-menu:82 83 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/10.png)]]84 85 Once a channel has been added to the favourites, a channel number is assigned.[[br]]86 The first channel in the first favourites is channel number 1:87 88 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/11.png)]]89 90 When a channel is assigned to more than one favourites list, it additionally[[br]]91 obtains further channel numbers:92 93 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/12.png)]]94 95 === EPG favourite "EPG scan " ===96 97 For TV channels there is a special favourite called "EPG scan".[[br]]98 Copy all channels you want to be included for the timed EPG scan, all channels in this list[[br]]99 will have their epg automatically scaned.100 101 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/13.png)]]102 103 === Satellite ===104 Creating and Editing Satellite entrys105 Switch to the "Satellite" tab. After clicking the right mouse button the[[br]]106 drop-down-menu is displayed, where you can create a new Satellite or edit an existing one.[[br]]107 Double - clicking on an existing Satellite also opens this for editing.108 109 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/14.png)]]110 111 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/15.png)]]112 113 === Creating and Editing Transponders ===114 115 Switch to the "Transponder" tab. After clicking the right mouse button the drop-down-menu[[br]]116 is displayed, where you can create a new Transponder or edit an existing one.[[br]]117 Double - clicking on an existing Transponder also opens this for editing.118 119 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/16.png)]]120 121 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/17.png)]]122 123 === Creating and Editing Channels ===124 Switch to the tab "TV" or "Radio". After clicking the right mouse button the drop-down-menu[[br]]125 is displayed, where you can create a new channel or edit an existing one.[[br]]126 Double - clicking on an existing channel also opens this for editing.127 128 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/18.png)]]129 130 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/19.png)]]131 132 === Using receiver profiles ===133 134 If you have more than one Receiver, it is advisable to work with profiles.[[br]]135 Go to the settings and enable the checkbox "Use Receiver Profiles":136 137 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/20.png)]]138 139 Enter a name for the profile, and click the "Save" button.[[br]]140 The profile will be created with the current settings specified under the "Titan" tab.141 [[BR]] To create a profile for a second titan receiver, switch to the "Titan" tab,[[br]]142 enter the IP address of the second receiver, switch back to the "General" tab,[[br]]143 enter a new profile name and click on "Save" once again.144 145 When you close the settings window by clicking the -OK-button- You will now[[br]]146 discover the new selection menu where you may choose your Receiver profile.147 148 [[Image(source:/wiki/Wiki-Pictures/VN/SCLE/21.png)]] -
wiki/pages/vn/External-Software-TiMote
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''9.1 TiMote''' [=#point9.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 [[br]]7 8 Timote is a universal remote control for Linux-based receivers.9 Currently (Atemio) TitanNit, Enigma2 and Neutrino are supported.10 please note that screen shots were taken from TiMote version xxx future versions of TiMote could make these screenshots invalid.11 12 Features:13 - Bouquets / Favorites14 - Show EPG15 - EPG search (*)16 - Show the current station17 - View recordings, stream and delete (*)18 - Create, edit and delete timer19 - Satfinder (*)20 - Power Control21 - Virtual Remote22 - News23 (*) Only Titannit/E224 25 To stream an appropriate player, for example, MX Player, VPlayer or BSPlayer (lite) need to be installed.26 If the app crashes, please activate the "send error report automatically" in the Settings. you can27 thereby help improve the software and make troubleshooting easier crucial to the developer.28 Comments, questions, suggestions or requests? Write me an email or post a comment on the app homepage!29 appear30 31 [[br]]32 33 [[Image(http://www.android.com/images/brand/get_it_on_play_logo_large.png)]]34 [[br]]35 [https://play.google.com/store/apps/details?id=eu.azato.timote PlayStore]36 37 [[br]]38 When you open up Timote You are presented with the main interface along the top of the display the radio buttons are used as the menu of Timote [[br]]39 See below for more information.40 41 '''Main''' [[br]]42 [[Image(source:/wiki/Wiki-Pictures/VN/TiMote/Main.png)]]43 44 Main contains a list of the main functions of timote:45 46 ||'''([wiki:External-Software-TiMote-TV#point0 TV]) ''' ||This will bring up a list of Boquets on the reciever).||47 ||'''([wiki:External-Software-TiMote-On-air#point0 On-air]) ''' ||This will Bring up the information of the TV channel currently displaying on the Reciever||48 ||'''([wiki:External-Software-TiMote-Movies#point0 Movies]) ''' ||This will bring up the Movielist's stored on the reciever).||49 ||'''([wiki:External-Software-TiMote-Timer#point0 Timer]) ''' ||This will bring up a list of the current timer recordings on the reciever).||50 ||'''([wiki:External-Software-TiMote-EPG-Search#point0 EPG-Search]) ''' ||This will bring up a a search page to search the EPG for a specific keyword).||51 52 [[br]]53 54 '''Misc''' [[br]]55 [[Image(source:/wiki/Wiki-Pictures/VN/TiMote/Misc.png)]]56 57 Misc contains a list of other functions of TiMote:58 59 ||'''([wiki:External-Software-TiMote-Signal-Finder#point0 Signal-Finder]) ''' ||This will bring up the signal info's of the current displayed channel.||60 ||'''([wiki:External-Software-TiMote-Screenshot#point9.1.1 Screenshot]) ''' ||This will take a screen shot of the TV Display||61 ||'''([wiki:External-Software-TiMote-Remote#point9.1.2 Remote]) ''' ||This will bring up the on screen remote).||62 ||'''([wiki:External-Software-TiMote-Message#point9.1.3 Message]) ''' ||This can be used to send messages to the TV display).||63 ||'''([wiki:External-Software-TiMote-Power-Menu#point9.1.4 Power Menu]) ''' ||This will bring up the power control menu64 ||'''([wiki:External-Software-TiMote-RGui#point9.1.5 RGui]) ''' ||This will start the RGui engine||65 ||'''([wiki:External-Software-TiMote-LCD-Mode#point9.1.6 LCD Mode]) ''' ||???||66 ||'''([wiki:External-Software-TiMote-Power-About#point09.1.7 Power About]) ''' ||This will bring up information on the developers of TiMote).||67 68 '''Profiles''' [[br]]69 [[Image(source:/wiki/Wiki-Pictures/VN/TiMote/Profile.png)]]70 71 Profiles is a list of receiver profiles with the ability to select and control multiple receivers.72 you may create a new profile using the add button at the top of the display.73 74 75 ----76 Temp data to move to Individual pages77 78 79 [[Image(source:/wiki/Wiki-Pictures/VN/TiMote/Stream.png)]]80 81 [[Image(source:/wiki/Wiki-Pictures/VN/TiMote/Boquet.png)]]82 83 84 -
wiki/pages/vn/External-Software-TiView
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''9.2 TiView''' [=#point9.2] ([wiki:English-Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 TiView is a Windows 32bit application, that will run on a Windows 32/64bit system.[[br]]6 The Tool uses the HTTP-RAW-Api of TitanNit.[[br]]7 [[br]]8 ''Highlights of TiView''9 10 - *Output of the TV-Screen on your PC11 - *Watch recordings on your PC12 - *PiP function for 2 simultaneous TV-Stream or recording viewing on your PC13 - *Proxy function for external access from a remote TiView and streaming a recoded stream14 - Management of timers for recordings15 - Infobar with progress bar for the actual program16 - Picon-view in the Infobar(Enabled by adding the picons into the folder /picons in TiView)17 - Channel EPG18 - Multi EPG19 - Grafical Multi EPG20 - EPG Search21 - Overview of recordings22 - Manage profiles should one have more than one Receiver23 - Signal-Monitor24 - Send Messages to your Receiver25 - OSD-Screenshot26 '''*For Playback on your PC you need a compatable media player the 32bit version 2.x of VLC Player .'''[[br]]27 (Alternativly you can copy libvlc.dll, libvlccore.dll and the Plugins folder from VLC into the TiView folder) -
wiki/pages/vn/File-Browser
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.2.5 File Browser''' [=#point3.2.5] ([wiki:Interface-Operation#point3.2 Media Center (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(http://sbnc.dyndns.tv/trac/export/26462/wiki/Wiki-Pictures/VN/file_manager.jpg)]][[br]]8 >9 >Here you can browse files from any source available from your decoder (local or network)10 > you may do such things as copy delete and move.11 12 13 [[br]] -
wiki/pages/vn/Filesystem-Check
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.5.1 File system Check''' [=#point3.5.5.1] ([WikiStart#point3.5 System (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/Filesystem-Check.jpg)]][[br]]7 >8 Here you can format your harddisk select an item and follow the onscreen prompts.9 10 [[br]]11 12 13 14 15 [[BR]] -
wiki/pages/vn/Free-Space
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.2 Free Space''' [=#point3.7.8.2] ([wiki:System-Info#point3.7.8 System Info (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/Free-Space.jpg)]][[br]]7 >8 Here you can view the free space of all the file systems acessable from the decoder.9 10 [[br]]11 12 13 [[br]] -
wiki/pages/vn/Graphic-EPG
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.1.3 Graphic EPG''' [=#point3.1.3] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Graphical_EPG.jpg)]][[BR]]8 >9 Graphic EPG is a multi channel graphical EPG.10 11 12 [[br]]13 14 '''Coloured and Extra Button's Functions"15 16 The __"Coloured and Extra Buttons"__ along the bottom of the display bring up additional menus and options with in the Single EPG menu.17 please see below for more info on the functions of these buttons:.18 19 ||'''Red Button: (Timer)''' ||This will bring up the recording timer menu to set up a timer.||20 ||'''0 key (EPG Search):''' ||This will search the EPG for text you specify and bring up a list of matches where you may press the red button to set up a timer.||21 ||'''FAV Button: (Favourite)''' ||This will bring up Favourite Boquet menu to select the EPG you would like to display.||22 ||'''Info Button: (Info)''' ||This will bring up the selected program's EPG info string.||23 24 25 26 For information on setting up a timer Recording using the red button see ([WikiStart#point103.10.6 Records]) for more info.27 For information on setting proforming an EPG search using the 0 Key see ([WikiStart#point103.10.5 EPG Search]) for more info. -
wiki/pages/vn/HTTP-Settings
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.4.6 HTTP Settings''' [=#point3.5.4.6] ([wiki:Interface-Operation#point3.5.1 network (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/HTTP-Settings.jpg)]][[br]]7 >8 Here you can setup your HTTP interface.9 10 [[br]]11 12 ||'''Start HTTPD:''' ||Start the webserver.||13 ||'''User:''' ||Sets the zoom level of the EPG to show more or less of a time span of the shown programs.||14 ||'''Password:''' ||Set to yes to use picons or the alternative Picon sets in the infobar and EPG stored in /var/media/autofs/sda1/swapextensions/usr/local/share/titan/picons/ directory.||15 ||'''HTTPD Port:''' ||Should the EPG be deleted before a the timed scan.||16 ||'''IP for Stream:''' ||Behavior after the EPG scan is completed EPG scan: Nothing (Stand-By) or Switch Off (Deep Stand-By).||17 ||'''Stream Port:''' ||Scan for a Media Highway EPG stream during EPG scan.||18 ||'''Start RGUID:''' ||Scan for a Media Highway version 2 EPG stream during EPG scan.||19 ||'''RGUID Port''' ||Scan for an OpenTV EPG stream during EPG scan.||20 21 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.22 23 [[br]]24 ----25 26 '''Coloured Button's Functions"27 28 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.29 please see below for more info on the functions of these buttons:.30 31 ||'''Text Button: (Keyboard)''' ||This will bring up the onscreen keyboard to edit the currently selected test string.||32 33 -
wiki/pages/vn/Hard-Disk
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.5 Hard Disk''' [=#point3.5.5] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/system-Hard_Disk.jpg)]][[BR]]8 >9 Here you can configure your harddisk.[[BR]]10 please select a menu item for more information.11 [[br]]12 13 * ([wiki:Format-Hdd#point3.5.5.1 Format HDD])14 * ([wiki:Filesystem-Check#point3.5.5.2 Filesystem Check])15 * ([wiki:Configure#point3.5.5.3 Configure])16 * ([wiki:Time-to-sleep#point3.5.5.4 Time to sleep])17 18 [[BR]] -
wiki/pages/vn/History
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''1 TitanNit Info Contents ''' [=#point1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 [[br]]6 This section conatins information on TitanNit and frequently asked questions about it.7 Please choose an item below to find more information.8 9 You may select a skip to a specific setup topic or scroll down to read the complete guide.10 11 {{{#!div style="width: 1100px; margin: auto"12 {{{#!table style="border: none"13 {{{#!td align=center valign=top style="border: none; font-size: 115%"14 {{{#!div style="float: left"15 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/About.png,align=left,link=[#point1.1])]]16 }}}17 '''([#point1.1 About])'''[[br]]18 {{{#!div style="float: left19 click here to find info about TitanNit20 }}}21 }}}22 {{{#!td align=center valign=top style="border: none; font-size: 115%"23 {{{#!div style="float: left"24 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/History.png,align=left,link=[#point1.2])]]25 }}}26 '''([#point1.2 History])'''[[br]]27 {{{#!div style="float: left28 click here to find info on the beginnings of TitanNit29 }}}30 }}}31 {{{#!td align=center valign=top style="border: none; font-size: 115%"32 {{{#!div style="float: left"33 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/Features.png,align=left,link=[#point1.3])]]34 }}}35 '''([#point1.3 Features])'''[[br]]36 {{{#!div style="float: left37 click here to find info on the various features of TitanNit38 }}}39 }}}40 }}}41 }}}42 43 {{{#!div style="width: 1100px; margin: auto"44 {{{#!table style="border: none"45 {{{#!td align=center valign=top style="border: none; font-size: 115%"46 {{{#!div style="float: left"47 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/Frequnetly_Asked_Questions.png,align=left,link=[#point1.4])]]48 }}}49 '''([#point1.4 Frequently Asked Questions])'''[[br]]50 {{{#!div style="float: left51 Apendixcies/ references [[br]]to other setup related topics.52 }}}53 }}}54 }}}55 }}}56 [[br]]57 [[br]]58 59 ----60 '''1 About''' [=#point1.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])61 ----62 [[br]]63 TitanNit is a semi closed source replacement operating system for kathrein and Atemio/Atevio digital set top receivers.64 It has come about as the users/devs wanted something better than was currently available.65 TitanNit is spawned from other projects and is developed by users come devs so it is easy of use but yet still remains powerfull and configurable and feature packed.[[br]]66 [[br]]67 [[br]]68 69 ----70 '''1 History''' [=#point1.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])71 ----72 [[br]]73 * Everything started in April 2011. For almost three weeks our Developer Nit secretly worked on the foundation of Titan. After the presentation by Nit Obi and the rest of the team came on board. Everybody was surprised by the rapid development of the Titan Project.74 * From the beginning the development and source of Titan was nonpublic, as it was not to be foreseen in which direction the development would go.75 * After a development period of 6 months our hardware manufacturer Atemio declared interest in the project. Looking back at Years of support through Atemio with the Enigma2 Software, Atemio was given main priority for Titan project.76 * A six-months agreement with Atemio was signed in December 2011.77 * Due to the good cooperation the agreement was extended and is still in force.78 * The basic idea for this project originated for various reasons:79 * due to the missing Python Chip and low CPU speed the sh4 receivers have always had problems with Enigma2.80 * the constant improvement and expansion of Enigma2 and the TDT Git was comprehensive and time-consuming.81 * the alternative Neutrino GIT at that time was not layed out to support twin tuner Receivers.82 * Nit then decided to combine both, the Enigma2 and the Neutrino, to a new Gui which implemented all advantages of both systems.83 * Neutrinos main advantage has always been its speed84 * Enigma2s advantage was the ease of integration and expansion with skins and extensions85 * These two systems combined into one new system was the basic idea of Titan.86 [[br]]87 [[br]]88 89 ----90 '''2 Features''' [=#point1.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])91 ----92 [[br]]93 '' Highlights of TitanNit ''94 95 - Powerful Linux operating system96 - Fast boot97 - About 1 second from standby mode98 - About 25 seconds from the deep standby mode99 - Fast channel switching times (less than 1 second)100 - Different menu interfaces (skins) including customization options101 - Many options to customize the system to your needs102 - Backup / Restore function103 - Organized Favourites and Channel listings and the direct list of following Programs.104 - Multi-Tuner105 - Plug-in management106 - Supports many media formats107 - Wide range of plugins108 - PC programs to personalize and convert the channel list109 - Screen saver in radio mode110 - Remote control buttons freely assignable111 - Online update of the firmware with the ability to retain settings112 - Low memory consumption113 - 24 hour Forum Support114 - Growing Community115 - Web Interface116 - Android app "timote"117 - Windows App "tiView"118 - Bouquets Editor "SatchannelListEditor"119 [[br]]120 121 122 ----123 '''Frequently Asked Questions''' [=#point1.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])124 ----125 [[br]]126 127 '''What is Titan?'''[[br]]TitanNit is a semi closed source replacement operating system for kathrein and Atemio/Atevio digital set top receivers designed to completly replace the factory software.128 [[br]]129 130 '''What can Titan do?'''[[br]]Titan was primarally designed to play/view and record live tv services from tresterial, cable and satellite, it can also be used to play/view the most popular video, audio, and picture formats, and many more lesser-known formats, including:131 Video - DVD-Video, VCD/SVCD, MPEG-1/2/4, DivX, XviD, Matroska132 Audio - MP3, AAC.133 Picture - JPG, GIF, PNG.134 135 136 These can all be played directly from the hard-drive or from a computer over a local network (LAN) internet IPTV services and media streams hosted by the [[wiki:Plugins-Player#point10.11 TiThek]] plugin.137 138 TitanNit can play DVD-Video movies (with and without menus) from ISO/IMG images and even ZIP/RAR-archives with the use of the [[wiki:Plugins-Player#point10.11 dvd-player plugin]].139 TitanNit has a simple user interface that's pleasant and easy to use.140 141 All these features enable your device to function as a full multimedia entertainment system for your tv for the whole family to enjoy.142 [[br]]143 [[br]]144 145 '''What features does TitanNit have?'''[[br]]See the complete list of supported features in the [[wiki:Versions#point6 software versions changelog]] for information of the offically supported features.146 [[br]]147 [[br]]148 149 '''Where can I suggest/request a new feature or function to be implemented into TitanNit?'''[[br]]You can log a NEW feature/function request in our tracker. Just make sure that you first remember to search for existing "Feature Requests" before logging a new request/ticket! (see [wiki:Troubleshooting#point12.1 12.1 Bug Reporting] for information on submitting a ticket).150 151 You may also post a copy of your suggestion in the feature-suggestion section of our [http://www.aaf-digital.info/forum/forum.php AAF Digital Forum] if you want it open for discussion,152 Please respect that your request only counts as a suggestion, there' s no guarantee that it will implemented soon or ever.153 154 Almost all users think their own ideas is the most important, and a very common comment is: "if you only add these features then TitanNit will be perfect for me".155 156 You could try bribing the devs with elaborate gifts :-) flattery will get you every where and agorant requests will most likely get your posts deleted or get you banned from the forum please follow the rules of the forum [http://www.aaf-digital.info/ here].157 [[br]]158 [[br]]159 160 '''When will this and that feature or function be supported by TitanNit?'''[[br]]TitanNit development is driven by the tasks that are important to the individual developers and to the hardware sponsors Atemio, if you have a funky idea or feature you wish implemented submit a request ticket (see [wiki:Troubleshooting#point12.1 12.1 Bug Reporting], but make an extensive search of the forum and tickets before requesting it as it has probally been sugested before.161 [[br]]162 [[br]]163 164 '''Is TitanNit, or the AAFTeam affiliated with Fortis, katherin or ..... or the hardware manufacturer of my Reciever?'''[[br]]No, TitanNit and its members are not in any way affiliated with the manufactures in any way. TitanNit is a third party operating system designed to replace the manufactures original operating system.165 [[br]]166 [[br]]167 168 '''Will the instalation of Titan Void my Warranty?'''[[br]]Yes probally but this software is tested to ensure it won't dammage your reciever and can be reverted at any time to a factory condition. please see [wiki:Supported-Receivers#point7 Supported Receivers] for a list of suspected supported receivers, If you have successfully installed TitanNit on your Receiver please inform an admin member so this list can be updated and verified.169 170 If the factory software was so feature packed and bugless there would be no need for software like TitanNit but sadly this is a world where software is driven by sales and purchases by the big players who request features, but TitanNit is a little different it was started just because the users/ devs wanted something better than what was handed to them by the manufacturer.171 [[br]]172 [[br]]173 174 '''Why is TitanNit Not available for my receiver model XXX?'''[[br]]TitanNit is funded by Atemio who supplys hardware to the devs in return for developing software for use on these devices.175 In future TitanNit may be available for your receiver as support in increaced, at this time Titan in in development for the Broadcom Mips Archeture for the upcomming release of the Atemio 5200 which will be the first non SH4 based reciever supported by TitanNit.176 [[br]]177 [[br]]178 179 '''How do I ...'''[[br]] I don't know I suggest you read the [wiki:Quick-Start-Guide#point0 Quick Start Guide], manual, check the rest of the wiki or proform a [http://www.aaf-digital.info/forum/search.php?search_type=1 search] on the forum, as it has most likely been asked before and you will find the answer, as a last resort post a question on the [http://www.aaf-digital.info/forum/forum.php AAF Digital Forum].180 [[br]]181 [[br]]182 183 '''Where should I put videos/music and pictures so that Titan can read it?''' [[br]]Anywhere you like. TitanNit can read off the local harddisk,usb sticks, or from network sources. Simply press "Add a Source" using the network Browser and browse away.184 >[[Image(source:/wiki/Wiki-Pictures/VN/Network-Browser.jpg, 25%)]][[br]]185 [[br]]186 [[br]]187 188 '''What is the default username and password to the built-in FTP server and telnet server?'''Both the default password and the user name is “root” (in lower case) as with many linux instalations.189 [[br]]190 [[br]]191 192 '''Can I watch recordings from my decoder when on holiday?'''[[br]]yes you can you will need to set up either a static ip on your home network or set up a dynadns server, from there you can log onto the web interface and use video lan to watch tv or your recordings.193 [[br]]194 [[br]]195 196 '''Can I thank and or Chat the TitanNit team?''[[br]]Yes sure you can jump on the [[http://www.aaf-digital.info/forum/ AAFforum]] and leave a post and or stop by [wiki:Contact#point15 Skype] and request a invite the majority of us speak german, some of us speak english also.197 198 '''Do you accept donations?'''[[br]] the team is currently fully funded and no donations are nesessary but if you have some device that may be of use with titan feel free to contact us.199 200 '''How come the Wiki does not show how to operate feature or function.....?'''[[br]]Titan Is in development and is updated almost daily some features plugins or informations have yet to be merged in, this forum is open to editing by the community feel free to log in and add said feature's informatation to the wiki.201 [[br]]202 [[br]]203 204 ([#point1 Top of Page])205 206 207 208 -
wiki/pages/vn/Installation-Recovery
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''8 Installation and Recovery Contents''' [=#point8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 This section contains information on installation and removal of TitanNit from your receiver6 {{{#!div style="width: 1100px; margin: auto"7 {{{#!table style="border: none"8 {{{#!td align=center valign=top style="border: none; font-size: 115%"9 {{{#!div style="float: left"10 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Atemio.png, 60px,align=left,link=http://www.atemio.de Atemio homepage)]]11 }}}12 '''SH4 Atemio'''[[br]]13 {{{#!div style="float: left14 [http://www.atemio.de Atemio homepage]15 * [wiki:Installation-Recovery-SH4-Atemio#point8.000 Contents]16 * [wiki:Installation-Recovery-SH4-Atemio#point8.001 Atemio510]17 * [wiki:Installation-Recovery-SH4-Atemio#point8.002 Atemio520]18 * [wiki:Installation-Recovery-SH4-Atemio#point8.003 Atemio530]19 * [wiki:Installation-Recovery-SH4-Atemio#point8.004 Atemio7600]20 * [wiki:Installation-Recovery-SH4-Atemio#point8.005 Atemio700]21 * [wiki:Installation-Recovery-SH4-Atemio#point8.006 Atemio7000]22 }}}23 }}}24 {{{#!td align=center valign=top style="border: none; font-size: 115%"25 {{{#!div style="float: left"26 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Fortis.png, 60px,align=left,link=http://www.fortis.co.kr Fortis homepage)]]27 }}}28 '''SH4 Fortis'''[[br]]29 {{{#!div style="float: left30 [http://www.fortis.co.kr Fortis homepage]31 * [wiki:Installation-Recovery-SH4-Fortis#point8.010 Contents]32 * [wiki:Installation-Recovery-SH4-Fortis#point8.011 Fortis Clone]33 * [wiki:Installation-Recovery-SH4-Fortis#point8.012 Bootloader Installation]34 * [wiki:Installation-Recovery-SH4-Fortis#point8.013 Fortis FS-9000]35 * [wiki:Installation-Recovery-SH4-Fortis#point8.014 Fortis FS-9200]36 * [wiki:Installation-Recovery-SH4-Fortis#point8.015 Fortis HS-9510]37 * [wiki:Installation-Recovery-SH4-Fortis#point8.016 Fortis HX-8200]38 * [wiki:Installation-Recovery-SH4-Fortis#point8.017 Fortis HS-7810]39 }}}40 }}}41 {{{#!td align=center valign=top style="border: none; font-size: 115%"42 {{{#!div style="float: left"43 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/homecast.png, 60px,align=left,link=http://www.myhomecast.nl Homecast homepage)]]44 }}}45 '''SH4 Homecast'''[[br]]46 {{{#!div style="float: left47 [http://www.myhomecast.nl Homecast homepage]48 * [wiki:Installation-Recovery-SH4-Homecast#point8.020 Contents]49 * [wiki:Installation-Recovery-SH4-Homecast#point8.021 Homecast Pro]50 }}}51 }}}52 |----53 {{{#!td align=center valign=top style="border: none; font-size: 115%"54 {{{#!div style="float: left"55 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/IPBox.png, 60px,align=left,link=http://www.abipbox.com/ AB IPBox homepage)]]56 }}}57 '''SH4 IPBox'''[[br]]58 {{{#!div style="float: left59 [http://www.abipbox.com/ AB IPBox homepage]60 * [wiki:Installation-Recovery-SH4-IPBox#point8.030 Contents]61 * [wiki:Installation-Recovery-SH4-IPBox#point8.031 Ipbox91]62 * [wiki:Installation-Recovery-SH4-IPBox#point8.032 Ipbox900]63 * [wiki:Installation-Recovery-SH4-IPBox#point8.033 Ipbox910]64 * [wiki:Installation-Recovery-SH4-IPBox#point8.034 Ipbox9000]65 }}}66 }}}67 {{{#!td align=center valign=top style="border: none; font-size: 115%"68 {{{#!div style="float: left"69 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/kathrein.png, 60px,align=left,link=http://www.kathrein-gmbh.at kathrein homepage)]]70 }}}71 '''SH4 Katherin'''[[br]]72 {{{#!div style="float: left73 [http://www.kathrein-gmbh.at kathrein homepage]74 * [wiki:Installation-Recovery-SH4-Katherin#point8.040 Contents]75 * [wiki:Installation-Recovery-SH4-Katherin#point8.041 Ufs910]76 * [wiki:Installation-Recovery-SH4-Katherin#point8.042 Ufs912]77 * [wiki:Installation-Recovery-SH4-Katherin#point8.043 Ufs913]78 * [wiki:Installation-Recovery-SH4-Katherin#point8.044 Ufs922]79 * [wiki:Installation-Recovery-SH4-Katherin#point8.045 Ufc960]80 }}}81 }}}82 {{{#!td align=center valign=top style="border: none; font-size: 115%"83 {{{#!div style="float: left"84 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Spark.png, 60px,align=left,link=http://www.spark-tv.com Spark homepage)]]85 }}}86 '''SH4 Spark'''[[br]]87 {{{#!div style="float: left88 [http://www.spark-tv.com Spark homepage]89 * [wiki:Installation-Recovery-SH4-Spark#point8.050 Contents]90 * [wiki:Installation-Recovery-SH4-Spark#point8.051 Spark7111]91 * [wiki:Installation-Recovery-SH4-Spark#point8.052 Spark7162]92 }}}93 }}}94 |----95 {{{#!td align=center valign=top style="border: none; font-size: 115%"96 {{{#!div style="float: left"97 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Atemio.png, 60px,align=left,link=http://www.atemio.de Atemio homepage)]]98 }}}99 '''Mips Atemio'''[[br]]100 {{{#!div style="float: left101 [http://www.atemio.de Atemio homepage]102 * [wiki:Installation-Recovery-Mips-Atemio#point8.060 Contents]103 * [wiki:Installation-Recovery-Mips-Atemio#point8.061 Atemio5000 AKA Nemesis]104 * [wiki:Installation-Recovery-Mips-Atemio#point8.062 Atemio5200]105 * [wiki:Installation-Recovery-Mips-Atemio#point8.063 Atemio6000]106 * [wiki:Installation-Recovery-Mips-Atemio#point8.064 Atemio6100]107 * [wiki:Installation-Recovery-Mips-Atemio#point8.065 Atemio6200]108 }}}109 }}}110 {{{#!td align=center valign=top style="border: none; font-size: 115%"111 {{{#!div style="float: left"112 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/beyonwiz.png, 60px,align=left,link=http://www.beyonwiz.com.au Beyonwiz homepage)]]113 }}}114 '''Mips Beyonwiz'''[[br]]115 {{{#!div style="float: left116 [http://www.beyonwiz.com.au Beyonwiz homepage]117 118 * [wiki:Installation-Recovery-Mips-Beyonwiz#point8.070 Contents]119 * [wiki:Installation-Recovery-Mips-Beyonwiz#point8.071 BeyonwizT4]120 }}}121 }}}122 {{{#!td align=center valign=top style="border: none; font-size: 115%"123 {{{#!div style="float: left"124 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Goldern_Interstar.png, 60px,align=left,link=http://www.golden-interstar.pl Golden Interstar homepage)]]125 }}}126 '''Mips Golden Interstar'''[[br]]127 {{{#!div style="float: left128 [http://www.golden-interstar.pl Golden Interstar homepage]129 * [wiki:Installation-Recovery-Mips-Golden-Interstar#point8.080 Contents]130 * [wiki:Installation-Recovery-Mips-Golden-Interstar#point8.081 Xpeedlx1/2]131 * [wiki:Installation-Recovery-Mips-Golden-Interstar#point8.082 Xpeedlx3]132 }}}133 }}}134 |----135 {{{#!td align=center valign=top style="border: none; font-size: 115%"136 {{{#!div style="float: left"137 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Miraclebox.png, 60px,align=left,link=http://www.miraclebox.se miraclebox homepage)]]138 }}}139 '''Mips Miraclebox[[br]]140 {{{#!div style="float: left141 [http://www.miraclebox.se Miraclebox homepage]142 * [wiki:Installation-Recovery-Mips-Miraclebox#point8.090 Contents]143 * [wiki:Installation-Recovery-Mips-Miraclebox#point8.091 MBUltra]144 * [wiki:Installation-Recovery-Mips-Miraclebox#point8.092 MBMini]145 }}}146 }}}147 {{{#!td align=center valign=top style="border: none; font-size: 115%"148 {{{#!div style="float: left"149 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Sezam.png, 60px,align=left,link=http://www.sezam-club.ru/ homepage)]]150 }}}151 '''Mips Sezam'''[[br]]152 {{{#!div style="float: left153 [http://www.sezam-club.ru/ Mips Sezam homepage]154 * [wiki:Installation-Recovery-Mips-Sezam#point8.100 Contents]155 * [wiki:Installation-Recovery-Mips-Sezam#point8.101 Sezam-Marvel]156 * [wiki:Installation-Recovery-Mips-Sezam#point8.102 Sezam-1000HD]157 }}}158 }}}159 }}}160 }}}161 162 163 ----164 '''8.113 IRD Download Locations''' [=#point8.113] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])165 ----166 * [wiki:Manufactures#point13 13 Manufactures] - [http://atemio.de/index.php/software-updates Stable Images][[br]]167 * [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]168 169 '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]170 * [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6 iboot sh4 loader flashing and recovery ][[br]]171 172 [[br]]173 [#point8 Top of Page]174 [[br]]175 176 177 178 179 -
wiki/pages/vn/Installation-Recovery-SH4-Homecast
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''8.020 Homecast''' [=#point8.020] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.7 8 '''SH4 Homecast Contents'''9 10 * [#point8.021 8.021 Homecast pro]11 12 13 '''Additional Info'''14 15 * [#point8.022 8.022 Uninstallation]16 * [#point8.023 8.025 Update TitanNit]17 * [#point8.024 8.024 IRD Download Location]18 19 ----20 '''8.021 Homecast Pro''' [=#point8.021] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])21 ----22 '' How do I install an Homecast UPDATEUSB Image? ''23 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.2 IRD Download Locations])24 * Extract the zip file25 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.26 Note: The USB stick should not be formatted with windows. Use a separate program, such as the27 " HP USB Disk Storage Format Tool" (freeware program).28 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.29 * Turn off the Receiver and disconnect all USB devices.30 * Connect the USB stick with the IMG file to your Receiver31 * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,32 then the installation starts. Only then release the button33 Note: If installation does not start, use a different USB stick.34 * The installation is finished when DONE appears on the receiver.35 * Restart the machine after by the main switch again to .36 [[br]]37 [#point8 Top of Page]38 [[br]]39 40 ----41 '''8.022 Uninstalling Titan''' [=#point8.022] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])42 ----43 If you have an Homecast receiver all you have to do is install your original IMG file as explained above and no bootloader changes are necessary.44 45 [[br]]46 [#point8 Top of Page]47 [[br]]48 49 ----50 '''8.023 Update TitanNit''' [=#point8.023] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])51 ----52 There are two ways to update your TitanNit version and there are merits to both methods :53 54 IRD offline method see [#point8.020 Homecast Contents] and select your Receiver model to show information on how to update titan using an IRD TitanNit image.55 [[br]]56 ''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed.57 Plugins and files installed to MNT or a valid configured storage device will retain there settings .''58 59 Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.60 [[br]]61 ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''62 [[br]]63 [#point8 Top of Page]64 [[br]]65 66 ----67 '''8.024 IRD Download Locations''' [=#point8.024] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])68 ----69 70 * [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]71 72 [[br]]73 [#point8 Top of Page]74 [[br]]75 -
wiki/pages/vn/Installation-Recovery-SH4-Katherin
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.7 8 '''SH4 Fortis Contents'''9 10 * [#point8.041 8.041 Kathrein Ufs910]11 * [#point8.042 8.042 Kathrein Ufs912]12 * [#point8.043 8.043 Kathrein Ufs913]13 * [#point8.044 8.044 Kathrein Ufs922]14 * [#point8.045 8.045 Kathrein Ufs960]15 16 '''Additional Info'''17 18 * [#point8.046 8.06 Uninstallation]19 * [#point8.047 8.07 Update TitanNit]20 * [#point8.048 8.08 IRD Download Location]21 22 ----23 '''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])24 ----25 '' How do I install a Kathrein UFS910 update image? ''26 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.27 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])28 * Extract the zip file29 * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick.30 Note: The USB stick should not be formatted with windows, but a separate program, such as the31 " HP USB Disk Storage Format Tool" (freeware program).32 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.33 * Turn off the Receiver and disconnect all USB devices.34 * Connect the USB stick with the img file to the front USB Port35 * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds)36 until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button-37 Note: If installation does not start, use a different USB stick.38 * After successfully installing the receiver will reboot and the installed image should start-up39 [[br]]40 [#point8 Top of Page]41 [[br]]42 ----43 '''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])44 ----45 '' How do I install a Kathrein UFS912 update image? ''46 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])47 * Extract the zip file48 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ .49 Note: The USB stick should not be formatted with windows, but a separate program, such as the50 " HP USB Disk Storage Format Tool" (freeware program).51 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.52 * Turn off the Receiver and disconnect all USB devices.53 * Connect the USB stick with the img file54 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,55 then the installation begins. Only after that message release the -TV/Radio button-56 Note: If installation does not start, use a different USB stick.57 * After successfully installing the receiver will reboot and the installed image should start-up58 [[br]]59 [#point8.1 Top of Page]60 [[br]]61 ----62 '''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])63 ----64 '' How do I install a Kathrein UFS913 update image? ''65 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.66 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])67 * Extract the zip file68 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .69 Note: The USB stick should not be formatted with windows, but a separate program, such as the70 " HP USB Disk Storage Format Tool" (freeware program).71 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.72 * Turn off the Receiver and disconnect all USB devices.73 * Connect the USB stick with the img file74 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,75 then the installation begins. Only after that message release the -TV/Radio button-76 Note: If installation does not start, use a different USB stick.77 * After successfully installing the receiver will reboot and the installed image should start-up78 [[br]]79 [#point8.1 Top of Page]80 [[br]]81 ----82 '''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])83 ----84 '' How do I install a Kathrein UFS922 update image? ''85 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.86 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])87 * Extract the zip file88 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .89 Note: The USB stick should not be formatted with windows, but a separate program, such as the90 " HP USB Disk Storage Format Tool" (freeware program).91 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.92 * Turn off the Receiver and disconnect all USB devices.93 * Connect the USB stick with the img file94 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,95 then the installation begins. Only after that message release the -TV/Radio button-96 Note: If installation does not start, use a different USB stick.97 * After successfully installing the receiver will reboot and the installed image should start-up98 [[br]]99 [#point8 Top of Page]100 [[br]]101 ----102 '''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])103 ----104 '' How do I install a Kathrein UFS960 update image? ''105 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.106 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])107 * Extract the zip file108 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ .109 Note: The USB stick should not be formatted with windows, but a separate program, such as the110 " HP USB Disk Storage Format Tool" (freeware program).111 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.112 * Turn off the Receiver and disconnect all USB devices.113 * Connect the USB stick with the img file114 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,115 then the installation begins. Only after that message release the -TV/Radio button-116 Note: If installation does not start, use a different USB stick.117 * After successfully installing the receiver will reboot and the installed image should start-up118 [[br]]119 [#point8 Top of Page]120 [[br]]121 122 ----123 '''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])124 ----125 If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.126 127 [[br]]128 [#point8 Top of Page]129 [[br]]130 131 ----132 '''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])133 ----134 There are two ways to update your TitanNit version and there are merits to both methods :135 136 IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.137 [[br]]138 ''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.139 Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''140 141 Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.142 [[br]]143 ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''144 [[br]]145 [#point8 Top of Page]146 [[br]]147 148 ----149 '''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])150 ----151 [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]152 153 [[br]]154 [#point8 Top of Page]155 [[br]] -
wiki/pages/vn/Interface-Operation
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''3 Interface and Operation Contents''' [=#point3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 New Gui section work in progress expect dead links or missing data.5 ----6 == Interface and Operation ==7 8 This section contains information about the on screen menus within TitanNit and discriptions to the various9 items and their functions aswell as helpfull information and tricks to get the most possible experience with your Receiver.10 11 Note: pictures in this area only apply to the default skin used in Titan.12 If you do not see a specific menu item on the display please select the default skin from the menu as follows:13 14 Press the __"Menu"__ button and select __"Settings"__ scroll down to __"Skin"__ and select the __"Default"__ Skin from the menu.15 The decoder will then reboot with the new selected __Default__ skin.16 17 [[Image(source:/wiki/Wiki-Pictures/VN/Mainmenu.jpg)]][[br]]18 19 TitanNit is an easy to use GUI for Linux receivers. Using the default skin (Factory setting) all options, settings and help texts are displayed, so you have an overview of all functions and possible settings for customization.20 21 The newer Receiver types like Atemio520 have a help button on the remote where detailed help can be displayed on screen. Thus you do not need to refer to the manual for help. This help display will be optimized / enhanced in the future.22 23 Interface and operation contents24 please select a menu item from the GUI for more information25 26 * ([#point3.1 Records and epg])27 * ([#point3.2 Media center])28 * ([#point3.3 Media player])29 * ([#point3.4 Extentions])30 * ([#point3.5 System])31 * ([#point3.6 Settings])32 * ([#point3.7 Information])33 * ([#point3.8 Standby-Power Off])34 35 [[br]]36 [[br]]37 ----38 '''Records and EPG''' [=#point3.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])39 ----40 41 42 [[Image(source:/wiki/Wiki-Pictures/VN/Recordsand_EPG.jpg)]][[br]]43 44 Records and Epg menu contains all the different views and search settings for the epg,45 it also allows setup and personalization of timer recordings46 Please select a menu item for more specific information on that item.47 * ([wiki:EPG-Short-View#point3.1.1 EPG Short View])48 * ([wiki:Single-EPG#point3.1.2 Single EPG])49 * ([wiki:Multi-EPG#point3.1.3 Multi EPG])50 * ([wiki:Graphic-EPG#point3.1.4 Graphic EPG])51 * ([wiki:EPG-Search#point3.1.5 EPG Search])52 * ([wiki:Records#point3.1.6 Records])53 54 [[br]]55 56 ----57 '''3.2 Media Center''' [=#point3.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])58 ----59 [[br]]60 [[Image(source:/wiki/Wiki-Pictures/VN/Media_Center.jpg)]][[br]]61 62 Media center contains all the different media players to play streams from local and online sources,63 it also contains a file browser and internet browser for setting up pay streams and login details for online media.64 Please select a menu item for more specific information on that item.65 66 * ([wiki:Audio-Player#point3.2.1 Audio Player])67 * ([wiki:Video-Player#point3.2.2 Video Player])68 * ([wiki:Picture-Player#point3.2.3 Picture Player])69 * ([wiki:Mediathek#point3.2.4 Mediathek (Online library)])70 * ([wiki:File-Browser#point3.2.5 File Browser])71 * ([wiki:Internet-Browser#point3.2.6 Internet Browser])72 * ([wiki:Weather#point3.2.7 Weather])73 74 75 [[br]]76 77 ''' information'''78 79 80 Media Center It is a collection of media players intergrated in one place (able to stream local or the Internet based streams)81 82 ''' Audio player '''83 * File List mode (display different possible views quickly, default, large, cover, full cover)84 * Play List mode (internal and external m3u Playlists)85 * Automatic integration of MediaDB with covers and ID3 tag info extracted from the mp3 file86 * Random mode (random)87 * Repeat mode (repeat)88 * Screen Saver (title text, scrolling images, jumping pictures, wallpapers)89 * Radio mode (m3u files can be played back over the Internet in all popular protocols rtmp, rtmpe, rts, rtp, mms, http)90 * All key formats supported via the installation of additional codec packs.91 * Auto play the next file92 * seek function (seek 1-3 10s 30s from 0.4 to 6 0.7 to 9 60s)93 * skip << >>94 * Mount image mode (iso, img, rar)95 * Various settings in the Settings Screen96 * Various sort options97 98 ''' Video Player '''99 * File List mode (display different possible views quickly, default, large, cover, full cover)100 * Play List mode (internal and external m3u Playlists)101 * Automatic Intergration of MediaDB with cover, the background images and IMDB info downloaded from the Internet102 * Random mode (random)103 * Repeat mode (repeat)104 * Streaming mode (m3u files can be played back over the Internet in all popular protocols rtmp, rtmpe, rts, rtp, mms, http)105 * All key formats supported via the installation of additional codec packs.106 * Automatic Resume from the last position, or playback from the beginning.107 * Auto play the next file108 * Mount image mode (iso, img, rar)109 * DVD material (VIDEO_TS, usb, dvd drive ) but only if the corresponding Plugin is installed (DVDPlayer)110 * Various settings in the Settings Screen111 * Various sort options112 * seek function (seek 1-3 ,4-6 ,7-9 with the values from the titan settings)113 *(seek on -pad up / down 10min left / right 1min)114 * In the file list (delete file additional menu, Imdb, ...) mode info button115 * In play mode - Red button - (additional menu Imdb, ...)116 * In Play Mode - Green button - (image ratio adjustable)117 * In Play Mode - Yellow button - (audio track selection)118 * In Play Mode - Blue button - (Screensaver adjustable)119 * In play mode - button text - (subtitles adjustable)120 * External Subtitle support (srt / sub files must have the same name as the video file)121 * Internal Subtitle Support (dvd / mkv files with integrated subtitles)122 * Manual IMDB lookup for [http://www.imdb.com/ Imdb / Cover]123 * Wallpapers adjustable (only in Full Cover interval / number)124 125 ''' PicturePlayer '''126 * File List mode (display different possible views quickly, default, large, cover) (cover in that case means preview)127 * Play List mode (internal and external m3u Playlists pls)128 * Complete slide show with no waiting periods except the first file129 * Random mode (random)130 * Repeat mode (repeat)131 * Supported formats png / jpg132 * Mount image mode (iso, img, rar)133 * Various settings in the Settings Screen134 * Various sort options135 * Background radio selection136 137 ''' MediaThek /online library '''138 * View images in groups of 2/6/12/24/30139 * [http://www.youtube.com/ Youtube] / [http://www.myvideo.de/ Myvideo] / [http://www.zdf.de/ZDFmediathek Zdf] / [http://www.ardmediathek.de/ Ard]140 * [http://rtl-now.rtl.de/ Rtl] / [http://www.rtl2.de/video/ Rtl2Now] / [http://www.superrtlnow.de/ SuperRtl] / [http://www.voxnow.de/ VoxNow] (with Pay-streams are hidden by default this can also be made visible)141 * [http://www.netzkino.de Netzkino] / [http://www.tectime.tv/ DrDish] / [http://www.giga.de Giga]142 * [http://www.beeg.com Beeg] / [http://www.xvideos.com Xvideos] (xxx ) (blocked by child protection pin)143 * [https://gitorious.org/neutrino-mp/max10s-neutrino-mp/raw/e4fefb51121d7886b81227eb1215da049e1a729a:data/webtv/webtv.xml InternetTv] (Live Streams)144 * [http://dir.xiph.org/yp.xml InternetRadio] (Live Streams)145 * Support favourites146 * More providers are supported with the extension codec pack147 * Some Sites allow lokal strorage of their online streams148 * Memory Buffer adjustable for smooth, streaming149 150 '''File Browser '''151 * Copy data152 * Move data153 * Delete data154 * Rename data155 * Create folders156 157 ''' Internet browser ''' (if installed)158 * From remote control unit159 * Support favourites160 161 '''Weather plugin '''162 * Select location163 164 ----165 '''3.3 Media player''' [=#point3.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])166 167 ----168 169 170 [[Image(source:/wiki/Wiki-Pictures/VN/Media_player.jpg)]][[br]]171 172 Media player is a short file system browser for viewing local media files,173 174 175 '''Coloured Button's Functions'''176 177 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.178 Please see below for more info on the functions of these buttons:.179 180 ||'''Red Button: (Sorting)''' ||Set the sort method for the files listed in the file list display.||181 ||'''Green Button: (Select)''' ||Play the selected media file.||182 ||'''Yellow Button: (EPG)''' ||Show the EPG information on the current selected media file (If present)||183 ||'''Blue Button: (Sort)''' ||Set the sort method for the files listed in the file list display.||184 ||'''Info Button: (info)''' ||This will allow you to view online IMDB/TMDB information on the current selected media file.||185 186 [[br]]187 188 ----189 '''3.4 Extentions''' [=#point3.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])190 ----191 192 [[Image(source:/wiki/Wiki-Pictures/VN/Extentions.jpg)]][[br]]193 194 Extentions menu section contains all the available tools to personalize plugins195 Please select a menu item for more specific information on that item.196 197 * ([wiki:Plugins#point3.4.1 Plugins])198 * ([wiki:Change-Feed#point3.4.2 Change Feed])199 * ([wiki:TPK-Upgrade#point3.4.3 TPK Upgrade])200 * ([wiki:TPK-Install#point3.4.4 TPK Install (Online)])201 * ([wiki:TPK-Tmp#point3.4.5 TPK Tmp (TMP)])202 * ([wiki:TPK-Media#point3.4.6 TPK Media (Media)])203 * ([wiki:TPK-Remove#point3.4.7 TPK Remove])204 205 [[br]]206 207 ----208 '''3.5 System''' [=#point3.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])209 210 ----211 212 [[Image(source:/wiki/Wiki-Pictures/VN/System.jpg)]][[br]]213 214 The System menu section contains all the important settings to set up the Receiver Hardware and Software215 Please select a menu item for more specific information on that item.216 217 * ([wiki:Channel-Service#point3.5.1 Channel Service])218 * ([wiki:Common-Interface#point3.5.2 Common Interface])219 * ([wiki:Smart-Card-Reader#point3.5.3 Smart Card Reader])220 * ([wiki:Network#point3.5.4 Network])221 * ([wiki:Hard-Disk#point3.5.5 Hard Disk])222 * ([wiki:VFDisplay#point3.5.6 VFDisplay])223 * ([wiki:System-Update#point3.5.7 System Update])224 * ([wiki:Backup#point3.5.8 Backup])225 * ([wiki:Settings-Backup-Restore#point3.5.9 Settings Backup Restore])226 * ([wiki:Receiver-Unlock#point3.5.10 Receiver Unlock])227 228 [[br]]229 ----230 '''3.6 Settings''' [=#point3.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])231 232 ----233 234 235 236 [[Image(source:/wiki/Wiki-Pictures/VN/Settings.jpg)]][[br]]237 238 The Settings menu section contains all the Software settings of the Receiver,239 within the menu you can personalize the appearance and various settings of the Interface240 Please select a menu item for more specific information on that item.241 242 * ([wiki:AV-Settings#point3.6.1 AV Settings])243 * ([wiki:Language#point3.6.2 Language])244 * ([wiki:Timezone#point3.6.3 Timezone])245 * ([wiki:Red-Button#point3.6.4 Red Button])246 * ([wiki:Blue-Button#point3.6.5 Blue Button])247 * ([wiki:Media-Button#point3.6.6 Media Button])248 * ([wiki:Adjust#point3.6.7 System Settings])249 * ([wiki:Skin#point3.6.8 Skin])250 * ([wiki:Skin-Adjust#point3.6.9 Skin Settings])251 * ([wiki:Screensaver-Adjust#point3.6.10 Screensaver])252 * ([wiki:Timeshift-Settings#point3.6.11 Timeshift])253 * ([wiki:Record-Path#point3.6.12 Path for Recordings])254 * ([wiki:EPG-Settings#point3.6.13 EPG])255 * ([wiki:Child-Protection#point3.6.14 Parental Control])256 * ([wiki:Restore-Default-Settings#point3.6.15 Restore Factory Settings])257 * ([wiki:Video-Settings#point3.6.16 Video Settings])258 * ([wiki:Channel-Edit#point3.6.17 Channel Edit])259 * ([wiki:MediaDB-Settings#point3.6.18 MediaDB Settings])260 * ([wiki:Auto-Start-Settings#point3.6.19 Auto Start])261 262 [[br]]263 264 ----265 '''3.7 Information''' [=#point3.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])266 267 ----268 269 [[Image(source:/wiki/Wiki-Pictures/VN/Information.jpg)]][[br]]270 271 The Information menu section can list all the information of the Hardware, Software and stream info,272 it also contains help and contact information.273 Within the menu you can personalize the appearance and various settings of the Interface274 Please select a menu item for more specific information on that item.275 276 * ([wiki:Service#point3.7.1 Service])277 * ([wiki:News-letter#point3.7.2 News letter])278 * ([wiki:About#point3.7.3 About])279 * ([wiki:Streaming#point3.7.4 Streaming])280 * ([wiki:Atemio-Hotline#point3.7.5 Atemio (Hotline)])281 * ([wiki:Titan-Changelog#point3.7.6 Titan Changelog])282 * ([wiki:Git-Changelog#point3.7.7 Git Changelog])283 * ([wiki:System-Info#point3.7.8 System Info])284 * ([wiki:Log#point3.7.9 Log])285 286 [[br]]287 288 ----289 '''3.8 Standby-Power Off''' [=#point3.8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])290 291 ----292 293 294 [[Image(source:/wiki/Wiki-Pictures/VN/Standby_Poweroff.jpg)]][[br]]295 296 The Standby/ Power Off contains settings related to power settings,297 within the menu you can decide how and when the Receiver shuts down298 Please select a menu item for more specific information on that item.299 300 ||'''Power-Off:''' ||The receiver shuts down completely (Deep Standby).||301 ||'''Standby:''' ||The receiver only shuts down the picture and volume. (Higher energy consumtion than in Deep Standby there for much faster booting time ~1Sek.). All functions of the WEB IF stay active.||302 ||'''Reboot:''' ||The receiver shuts down completely and reboots. (important for saving changes to the settings)||303 ||'''GUI-Restart:''' ||Only a reboot of the Titan software (faster) (changes to settings since last reboot/Power-Off are lost!).||304 ||'''([wiki:Power-Off-Timer Power Off Timer])''' ||Opens the Power Off timer menu to automatically switch the receiver to Power-Off or Standby at a specific time.||305 [[br]] -
wiki/pages/vn/MTD
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6.3 MTD''' [=#point3.7.8.6.3] ([WikiStart#point3.7.8.6 System Infos (Back)])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/MTD.jpg)]][[br]]7 >8 Here you can view the detailed info on the raw flash partitions (MTD).9 10 [[br]]11 12 13 [[br]] -
wiki/pages/vn/Manual-Search
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.1.3 Manual Search''' [=#point3.5.1.3] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/Manual-Search.jpg)]][[br]]7 >8 Here you can proform a manual channel scan.9 10 [[br]]11 12 ||'''Type of Scan''' ||The type of scan to proform.||13 ||'''Tuner''' ||Select the tunsr to scan with.||14 ||'''Satellite''' ||Select the satellite to scan.||15 ||'''ID''' ||??? .||16 ||'''System''' ||scan for hd or sd streams.||17 ||'''Frequency:''' ||select the frequency to scan.||18 ||'''Inversion:''' ||??? .||19 ||'''Symbolrate:''' ||select the signal rat to scan.||20 ||'''Polirisation''' ||scan for horozontal or vertical transponders.. ||21 ||'''FEC''' ||sel ect the forward error correction.||22 ||'''Scan:''' ||???.||23 ||'''Clear Before Scan:''' ||Select to clear channel data before scan.||24 ||'''Only Free to Air Services:''' ||During scan ignore pay tv services.||25 ||'''Blindscan:''' ||Scan for unknown satellite transponders.||26 ||'''Update channel Name''' ||???.||27 ||'''Entrys in Favourites''' ||if scaned channels are found in current favourites list what should be done.||28 ||'''Remove Empty Favourites''' ||Remove favourites list if they have no channels in them.||29 ||'''Remove Unused Channels From Favourites''' ||Remove channels from favourites that have ceased transmission.||30 31 ''Note some of the above settings only show and are relavant in a specific __"Type of Scan"__''32 33 34 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.35 36 '''Coloured Button's Functions'''37 38 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.39 Please see below for more info on the functions of these buttons:.40 41 ||'''Red Button: (Start scan)''' ||Start channel Scan with the selected settings.||42 ----43 '''After Scan Menu'''44 ----45 [[br]]46 47 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options after the scan hac sompleted menu.48 Please see below for more info on the functions of these buttons:.49 50 ||'''Red Button: (Save)''' ||Select a channel you wish to save and select the green button to save it in to the channel listing.||51 ||'''Green Button: (Save All)''' ||Store all channels in the channel listing.||52 53 54 -
wiki/pages/vn/Manufactures
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''13 Manufactures''' [=#point13] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 ||= '''[http://www.atemio.de Atemio]''' =||6 ||= [[Image(http://i.imgur.com/3TwQr.jpg,400,link=http://www.atemio.de)]] =||7 8 New Zealand reseller for fortis clone ultraplus decoders [http://www.ultrapower.co.nz Ultrapower]9 10 '''SH4 Katherin''' ([http://www.kathrein-gmbh.at kathrein homepage])11 12 '''SH4 Spark''' ([http://www.spark-tv.com Spark homepage)]13 14 '''SH4 AB IPBox''' ([http://www.abipbox.com/ AB IPBox homepage])15 16 '''Mips Golden Interstar''' ([http://www.golden-interstar.pl Golden Interstar homepage])17 18 '''SH4 Fortis''' ([http://www.fortis.co.kr Fortis homepage])19 * New Zealand reseller for fortis clone ultraplus decoders [http://www.ultrapower.co.nz Ultrapower]20 21 [[br]]22 [[br]] -
wiki/pages/vn/Media-Button
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.6.6 Media Button''' [=#point3.6.6] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Media_Button.jpg)]][[BR]]8 >9 >here you can configure what happens with the press of the Media button10 11 12 [[br]] -
wiki/pages/vn/Mediathek
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.2.4 Mediathek (Online library)''' [=#point3.2.4] ([wiki:Interface-Operation#point3.2 Media Center (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 [[Image(source:/wiki/Wiki-Pictures/VN/Tithek_main.jpg)]][[br]]8 >9 >Mediathek is the titan online media center to view various feeds from the internet10 >such as utube etc...11 12 13 [[br]] -
wiki/pages/vn/Memory
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.3 Memory''' [=#point3.7.8.6.2] ([wiki:System-Info#point3.7.8.6 System Infos (Back)])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/Memory.jpg)]][[br]]7 >8 Here you can view the detailed Memory info.9 10 [[br]]11 12 13 [[br]] -
wiki/pages/vn/Module
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6 Module''' [=#point3.7.8.6.4] ([wiki:System-Info#point3.7.8.6 System Infos (Back)])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Module.jpg)]][[br]]8 >9 Here you can view the detailed loaded Module info.10 11 [[br]]12 13 14 [[br]] -
wiki/pages/vn/Mounts
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.4 Mounts''' [=#point3.7.8.4] ([wiki:System-Info#point3.7.8 System Info (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/DE/System-Info-Mounts.jpg)]][[br]]7 >8 Here you can view all mounted devices on the receiver.9 10 [[br]]11 12 13 [[br]] -
wiki/pages/vn/Network
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.4 Network''' [=#point3.5.4] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/system-Network.jpg)]][[BR]]8 >9 >10 here you can set up your network interface and mounts.11 please select a menu item for more information12 [[br]]13 14 * ([wiki:Adaptor-Settings#point3.5.4.1 Adaptor Settings])15 * ([wiki:WLAN-Settings#point3.5.4.2 WLAN Settings])16 * ([wiki:Network-Test#point3.5.4.3 Network Test])17 * ([wiki:Network-Restart#point3.5.4.4 Network Restart])18 * ([wiki:Network-Browser#point3.5.4.5 Network Browser])19 * ([wiki:HTTP-Settings#point3.5.4.6 HTTP Settings])20 * ([wiki:DYNDNS-Settings#point3.5.4.7 DYNDNS Settings])21 22 [[br]]23 -
wiki/pages/vn/Network-Browser
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.4.5 Network Browser''' [=#point3.5.4.5] ([WikiStart#point3.5.1 network (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/Network-Browser.jpg)]][[br]]7 >8 Here you can setup network shares.9 10 [[br]]11 12 To __"Store"__ the settings Exit from the Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.13 14 [[br]]15 ----16 17 '''Coloured Button's Functions"18 19 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.20 please see below for more info on the functions of these buttons:.21 22 ||'''Red Button: (Add)''' ||This will bring up the add network share.||23 ||'''Green Button: (Edit)''' ||this will edit the currently selected network mount.||24 ||'''Yellow Button: (DEL)''' ||The will Delete the currently selected network share.||25 ||'''Blue Button: (Search)''' ||This will search the surrent subnet mask for available network shares.||26 ||'''Menu Button: (Auth Settings)''' ||this will allow you to edit the current password and user name.||27 -
wiki/pages/vn/Network-Restart
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.4.4 Network Restart''' [=#point3.5.4.4] ([wiki:System-Info#point3.5.1 network (Back])4 >5 >6 [[Image(source:/wiki/Wiki-Pictures/VN/Network-Restart.jpg)]]7 >8 Here you can Restart your network interface.9 10 [[br]]11 12 press the __"Ok"__ button to restart the network interface, Press __"Exit"__ to Cancel. -
wiki/pages/vn/News-letter
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.2 News letter''' [=#point3.7.2] ([wiki:Interface-Operation#point3.7 Information (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Newsletter.jpg)]][[BR]]8 >9 > here you can view news from the titan team.10 11 [[br]]12 13 Select a newsitem with the D-pad and press __"ok"__ to view it.14 15 To Exit from the Menu by pressing the __"Exit"__ button.16 -
wiki/pages/vn/Plugins
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''Plugins''' [=#point3.4.1] ([wiki:Interface-Operation#point3.4 Extentions (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Plugins.jpg)]][[BR]]8 >9 10 11 In this menu you can run your plugins start and stop them.12 13 to start a plugin select it with the D-pad and press __"ok"__14 15 '''Coloured Button's Functions"16 17 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.18 please see below for more info on the functions of these buttons:.19 20 '''Red Button''' This button unloads the currently selected plugin it can not be restarted until the box is rebooted.21 22 '''Blue Button''' This button restarts the currently selected plugin if it is not loaded or running.23 [[br]]24 25 26 -
wiki/pages/vn/Plugins-Channel-Lists
r37567 r37661 1 [[TranslatedPages]]2 '''10.6 Channel Lists''' [=#point10.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])3 4 Channel list's are provided by other users.[[br]]5 They contain complete satellite listings aswell as sorted favourites to make it[[br]]6 easier for you to use on your receiver.7 [[br]]8 A list of the current channel lists provided are:9 10 Satellite:11 * Hotbird 13.012 * Astra 19.213 * Astra 28.214 15 Cable:16 * Cable germany17 * Cable BW18 * Cable Unitymedia19 * Primacom Cable20 21 If you wish to provide your own satellite configurations please post them in the [http://aaf-digital.info AAF forum].22 ----23 ||= '''Default Kabel''' =||= '''Default Sat''' =||= '''Matze70 Neues Design''' =||= '''Matze70 Sat''' =||24 ||= [[Image(source:/ipk/source/settings_cableD_1_0/preview/prev.png)]] =||= [[Image(source:/ipk/source/settings_default_sat_1_0/preview/prev.png)]] =||= [[Image(source:ipk/source/settings_matze70neueDesign_sat19_1_0/preview/prev.png)]] =||= [[Image(source:/ipk/source/settings_matze70_sat_1_0/preview/prev.png)]] =||25 [[br]]26 ||= '''Bulldog 3xsat''' =||= '''Sofa Kabel-BW''' =||= '''Uljanow Sat''' =||= '''Unitymedia Cable''' =||27 ||= [[Image(source:/ipk/source/settings_bulldog_3xSat_1_0/preview/prev.png)]] =||= [[Image(source:/ipk/source/settings_sofa_cableBW_1_0/preview/prev.png)]] =||= [[Image(source:/ipk/source/settings_uljanow_1sat_1_0/preview/prev.png)]] =||= [[Image(source:/ipk/source/settings_unitymedia_cable/preview/prev.png)]] =||28 [[br]]29 ||= '''Primacom Kabel''' =||= '''Settings Eutelsat 36.0''' =||= '''Kabel Deutschland UH-Kreis''' =||= '''Sat Astra ORF''' =||30 ||= [[Image(source:/ipk/source/settings_primacom_cable_1_0/preview/prev.png)]] =||= [[Image(source:/ipk/source/settings_ser6_eutelsat36_1_0/preview/prev.png)]] =||= [[Image(source:/ipk/source/settings_paule_cable_1_0/preview/prev.png)]] =||= [[Image(source:/ipk/source/settings_orf_1xsat_1_0/preview/prev.png)]] =||31 [[br]]32 ||= '''Kabelplus ORF''' =||= '''Astra 19.2 KabelD''' =||= '''Bulldog 2xsat''' =||= '''Bulldog 1xsat''' =||33 ||= [[Image(source:/ipk/source/settings_kabelplus_cable_1_0/preview/prev.png)]] =||= [[Image(source:/ipk/source/settings_default_all_2_0/preview/prev.png)]] =||= [[Image(source:/ipk/source/settings_bulldog_2xSat_1_0/preview/prev.png)]] =||= [[Image(source:/ipk/source/settings_bulldog_1xsat_1_0/preview/prev.png)]] =||34 [[br]]35 ||= '''SAT/Cable 19.2 13.0 KabelD''' =||36 ||= [[Image(source:/ipk/source/settings_andy_2xSat_KabelD_1_0/preview/prev.png)]] =||37 [#point10.6 Top of Page] -
wiki/pages/vn/Plugins-Contents
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''10.1 Plugins''' [=#point10] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 5 6 ----7 8 == Plugin contents ==9 10 This list contains a list of the current online plugins available in TitanNit, please see [wiki:Interface-Operation#point3.4 3.4 Extentions] for more information on how to install and manage these plugins.11 12 please select an item below to view the available plugins in the selected area.13 14 {{{#!div style="width: 1100px; margin: auto"15 {{{#!table style="border: none"16 {{{#!td align=center valign=top style="border: none; font-size: 115%"17 {{{#!div style="float: left"18 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/Screensavers.png,align=left,link=[wiki:Plugins-Screensavers#point10.1 10.1 Screensavers])]]19 }}}20 '''[wiki:Plugins-Screensavers#point10.1 10.1 Screensavers]'''[[br]]21 {{{#!div style="float: left22 This section contains information on the various screen savers available in TitanNit.23 }}}24 }}}25 {{{#!td align=center valign=top style="border: none; font-size: 115%"26 {{{#!div style="float: left"27 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/Bootlogos.png,align=left,link=[wiki:Plugins-Bootlogos#point110.2 10.2 Bootlogos])]]28 }}}29 '''[wiki:Plugins-Bootlogos#point110.2 10.2 Bootlogos]'''[[br]]30 {{{#!div style="float: left31 This section contains information on the various Bootlogos available in TitanNit.32 }}}33 }}}34 {{{#!td align=center valign=top style="border: none; font-size: 115%"35 {{{#!div style="float: left"36 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/browser.png,align=left,link=[wiki:Plugins-Browser#point10.3 10.3 Browser])]]37 }}}38 '''[wiki:Plugins-Browser#point10.3 10.3 Browser]'''[[br]]39 {{{#!div style="float: left40 This section contains information on the various web browsers available in TitanNit.41 }}}42 }}}43 |----44 {{{#!td align=center valign=top style="border: none; font-size: 115%"45 {{{#!div style="float: left"46 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/Info_news.png,align=left,link=[wiki:Plugins-Infos#point10.5 10.5 info-news])]]47 }}}48 '''[wiki:Plugins-Infos#point10.5 10.5 info-news]'''[[br]]49 {{{#!div style="float: left50 This section contains information on the info and news pluggins screen savers available in TitanNit.51 }}}52 }}}53 {{{#!td align=center valign=top style="border: none; font-size: 115%"54 {{{#!div style="float: left"55 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/Channel_Lists.png,align=left,link=[wiki:Plugins-Channel-Lists#point10.6 10.6 Channel Lists])]]56 }}}57 '''[wiki:Plugins-Channel-Lists#point10.6 10.6 Channel Lists]'''[[br]]58 {{{#!div style="float: left59 This section contains default channel list for different services available in TitanNit.60 }}}61 }}}62 {{{#!td align=center valign=top style="border: none; font-size: 115%"63 {{{#!div style="float: left"64 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/Keymaps.png,align=left,link=[wiki:Plugins-Keymaps#point10.7 10.7 Keymaps])]]65 }}}66 '''[wiki:Plugins-Keymaps#point10.7 10.7 Keymaps]'''[[br]]67 {{{#!div style="float: left68 This section contains information on the various Keymaps available in TitanNit.69 }}}70 }}}71 |----72 {{{#!td align=center valign=top style="border: none; font-size: 115%"73 {{{#!div style="float: left"74 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/LCD_Pearl_Skins.png,align=left,link=[wiki:Plugins-LcdPearlSkins#point10.8 10.8 LCD Pearl Skins])]]75 }}}76 '''[wiki:Plugins-LcdPearlSkins#point10.8 10.8 LCD Pearl Skins]'''[[br]]77 {{{#!div style="float: left78 This section contains information on the various lcd skins available in TitanNit with an addon pearl lcd module.79 }}}80 }}}81 {{{#!td align=center valign=top style="border: none; font-size: 115%"82 {{{#!div style="float: left"83 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/LCD_Samsung_Skins.png,align=left,link=[wiki:Plugins-LcdSamsungSkins#point10.9 10.9 LCD Samsung Skins])]]84 }}}85 '''[wiki:Plugins-LcdSamsungSkins#point10.9 10.9 LCD Samsung Skins]'''[[br]]86 {{{#!div style="float: left87 This section contains information on the various skins available in TitanNit with a samsung display tablet extension device.88 }}}89 }}}90 {{{#!td align=center valign=top style="border: none; font-size: 115%"91 {{{#!div style="float: left"92 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/Network.png,align=left,link=[wiki:Plugins-Network#point10.10 10.10 Network])]]93 }}}94 '''[wiki:Plugins-Network#point10.10 10.10 Network]'''[[br]]95 {{{#!div style="float: left96 This section contains information on the various network plugins and extensions available in TitanNit.97 }}}98 }}}99 |----100 {{{#!td align=center valign=top style="border: none; font-size: 115%"101 {{{#!div style="float: left"102 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/player.png,align=left,link=[wiki:Plugins-Player#point10.10 10.10 Player])]]103 }}}104 '''[wiki:Plugins-Player#point10.10 10.10 Player]'''[[br]]105 {{{#!div style="float: left106 This section contains information on the various media players and media renderers available in TitanNit.107 }}}108 }}}109 {{{#!td align=center valign=top style="border: none; font-size: 115%"110 {{{#!div style="float: left"111 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/fonts.png,align=left,link=[wiki:Plugins-Fonts#point10.11 10.11 Fonts])]]112 }}}113 '''[wiki:Plugins-Fonts#point10.11 10.11 Fonts]'''[[br]]114 {{{#!div style="float: left115 This section contains information on the various gui fonts available in TitanNit.116 }}}117 }}}118 {{{#!td align=center valign=top style="border: none; font-size: 115%"119 {{{#!div style="float: left"120 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/Station_Logos.png,align=left,link=[wiki:Plugins-station-logos#point10.12 10.12 station logos])]]121 }}}122 '''[wiki:Plugins-station-logos#point10.12 10.12 station logos]'''[[br]]123 {{{#!div style="float: left124 This section contains information on the various pre configures icon sets available in TitanNit for various TV services.125 }}}126 }}}127 |----128 {{{#!td align=center valign=top style="border: none; font-size: 115%"129 {{{#!div style="float: left"130 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/Skins.png,align=left,link=[wiki:Plugins-Skins#point10.13 10.13 Skins])]]131 }}}132 '''[wiki:Plugins-Skins#point10.13 10.13 Skins]'''[[br]]133 {{{#!div style="float: left134 This section contains information on the various Gui Skins available in TitanNit.135 }}}136 }}}137 {{{#!td align=center valign=top style="border: none; font-size: 115%"138 {{{#!div style="float: left"139 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/Games.png,align=left,link=[wiki:Plugins-Games#point10.14 10.14 Games])]]140 }}}141 '''[wiki:Plugins-Games#point10.14 10.14 Games]'''[[br]]142 {{{#!div style="float: left143 This section contains information on the various games available in TitanNit.144 }}}145 }}}146 {{{#!td align=center valign=top style="border: none; font-size: 115%"147 {{{#!div style="float: left"148 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/Tools.png,align=left,link=[wiki:Plugins-Tools#point10.15 10.15 Tools])]]149 }}}150 '''[wiki:Plugins-Tools#point10.15 10.15 Tools]'''[[br]]151 {{{#!div style="float: left152 This section contains information on the various system pluggins and tools available in TitanNit.153 }}}154 }}}155 |----156 {{{#!td align=center valign=top style="border: none; font-size: 115%"157 {{{#!div style="float: left"158 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins-Contents/WLan.png,align=left,link=[wiki:Plugins-Wlan#point10.16 10.16 Wlan])]]159 }}}160 '''[wiki:Plugins-Wlan#point10.16 10.16 Wlan]'''[[br]]161 {{{#!div style="float: left162 This section contains information on the various wereless lan drivers available in TitanNit.163 }}}164 }}}165 |----166 }}}167 }}} -
wiki/pages/vn/Plugins-Emus
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''10.4 Emus''' [=#point10.4] ([wiki:Wiki#point0 contents]) ([Wikistart#point0 Main Page])4 ----5 6 Emulators are plugins that enable the use and connection to online pay tv services and providers to enable pay TV Reception.7 8 Ther are many emulators available from to support the connection to different pay TV services.9 10 Please note that in some countrys and providers this form of on line subscription is illegal please contact your pay TV provider or local authority for more information in this area, please see our [wiki:Disclaimer#point17 disclaimer] on services.11 12 This section is provided for for use only with providers who allow such use with their pay tv service.13 14 [[Image(source:/ipk/source.sh4/emus_camd3_3_902/preview/prev.png)]]15 [[Image(source:/ipk/source.sh4/emus_gbox_800/preview/prev.png)]]16 [[Image(source:/ipk/source.sh4/emus_gbox_806/preview/prev.png)]]17 [[Image(source:/ipk/source.sh4/emus_incubus_1_22/preview/prev.png)]]18 [[Image(source:/ipk/source.sh4/emus_mbox0.6_0010/preview/prev.png)]]19 [[Image(source:/ipk/source.sh4/emus_mgcamd_1_35/preview/prev.png)]]20 [[Image(source:/ipk/source.sh4/emus_mgcamd_1_38a/preview/prev.png)]]21 [[Image(source:/ipk/source.sh4/emus_newcs/preview/prev.png)]]22 [[Image(source:/ipk/source.sh4/emus_oscam_4736v13/preview/prev.png)]]23 [[Image(source:/ipk/source.sh4/emus_oscam_7209/preview/prev.png)]]24 [[Image(source:/ipk/source.sh4/emus_oscam_8755/preview/prev.png)]]25 [[Image(source:/ipk/source.sh4/emus_oscam_8755small/preview/prev.png)]]26 [[Image(source:/ipk/source.sh4/emus_oscam_8933/preview/prev.png)]]27 [[Image(source:/ipk/source.sh4/emus_oscam_nightly/preview/prev.png)]]28 [[Image(source:/ipk/source.sh4/emus_oscam_spezial/preview/prev.png)]] -
wiki/pages/vn/Plugins-Fonts
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''10.12 Fonts''' [=#point10.12] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 Should you not like the graphical presentation of titan or its looks[[br]]7 you may change it by installing the fonts (numbered left to right):[[br]]8 [[br]]9 '''1. actionmanitalic'''[[br]]10 '''2. alpharomanieg'''[[BR]]11 '''3. croissant'''[[BR]]12 '''4. default'''[[BR]]13 [[Image(source:/ipk/source/fonts_actionmanitalic_1_0/preview/prev.png)]]14 [[Image(source:/ipk/source/fonts_alpharomanieg_1_0/preview/prev.png)]]15 [[Image(source:/ipk/source/fonts_croissant_1_0/preview/prev.png)]]16 [[Image(source:/ipk/source/fonts_default_1_0/preview/prev.png)]][[br]][[br]]17 [[br]]18 '''5. digifaceregular'''[[BR]]19 '''6. goodtime'''[[BR]]20 '''7. ihatecomicsans'''[[BR]]21 '''8. lydianbolditalicbt'''[[BR]]22 [[Image(source:/ipk/source/fonts_digifaceregular_1_0/preview/prev.png)]]23 [[Image(source:/ipk/source/fonts_goodtime_1_0/preview/prev.png)]]24 [[Image(source:/ipk/source/fonts_ihatecomicsans_1_0/preview/prev.png)]]25 [[Image(source:/ipk/source/fonts_lydianbolditalicbt_1_0/preview/prev.png)]][[br]]26 [[br]]27 '''9. mightyzeocaps'''[[BR]]28 '''10. monoglyceridedemibold'''[[BR]]29 '''11. newgothicbt'''[[BR]]30 '''12. paddingtonbold'''[[br]]31 [[Image(source:/ipk/source/fonts_mightyzeocaps_1_0/preview/prev.png)]]32 [[Image(source:/ipk/source/fonts_monoglyceridedemibold_1_0/preview/prev.png)]]33 [[Image(source:/ipk/source/fonts_newgothicbt_1_0/preview/prev.png)]]34 [[Image(source:/ipk/source/fonts_paddingtonbold_1_0/preview/prev.png)]][[br]][[br]]35 [[br]]36 '''13. ploverbold'''[[br]]37 [[Image(source:/ipk/source/fonts_ploverbold_1_0/preview/prev.png)]]38 -
wiki/pages/vn/Plugins-LcdPearlSkins
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''10.8 LCD Pearl Skins''' ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 '''Pearl LCD''' is a project that allows a user to connect a Pearl USB LCD dotmatric display[[br]]7 to a compatible receiver. It allows displaying of channel logos, channel name, time and timebar[[br]]8 (for remaining time of the running program).9 10 The display is full skinable and you may personalize it for your own comfort.11 12 Please see the '''open source project''' for more information. Detailed information will follow.13 14 15 [[Image(source:/ipk/source/lcdpearlskins_atemio_style/preview/prev.png)]]16 [[Image(source:/ipk/source/lcdpearlskins_blau_mit_picons/preview/prev.png)]]17 [[Image(source:/ipk/source/lcdpearlskins_mrp/preview/prev.png)]][[br]]18 [[Image(source:/ipk/source/lcdpearlskins_only_picon/preview/prev.png)]]19 [[Image(source:/ipk/source/lcdpearlskins_picon_gross_schwarz/preview/prev.png)]]20 [[Image(source:/ipk/source/lcdpearlskins_schwarz_ohne_picons/preview/prev.png)]] -
wiki/pages/vn/Plugins-Network
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''10.10 Network''' [=#point10.10] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 5 The Plugins in this section allow you to extend the communication capabillty of your receiver.6 These plugins can be downloaded from the online extensions browser.7 8 9 10 '''DLNA''' is a server extension that allows you to stream video or audio files[[br]]11 directly to other DLNA capable digital devices attached in your home network.12 [[br]][[Image(source:/ipk/source.sh4/network_dlna/preview/prev.png)]]13 14 '''Facebook''' allows you login and use Facebook from your receiver.15 [[br]][[Image(source:/ipk/source.sh4/network_facebook/preview/prev.png)]]16 17 '''e2webserv''' allows a connection from an E2 client to your TitanNit receiver and allows[[br]]18 you to control your receiver, stream channels and recordings and allows managemant of[[br]]19 timers (for recordings). Thanks to this plugin it is possible to connect from an iOS[[br]]20 App, a PC or Raspberry Pi with the '''XBMC''' software (VU+).[[br]]21 It is reported to run with dreaMote Lite, dreaMote, e2RemoteHD[[br]]22 and Dreambox Live for iOS aswell as XBMC for Windows7 and Raspberry Pi.23 [[br]][[Image(source:/ipk/source.sh4/networklib_e2webserv/preview/prev.png)]]24 25 '''libpack''' is a compilation of drivers that extend the[[br]]26 communication capability of your receiver.27 [[br]][[Image(source:/ipk/source.sh4/networklib_libpack/preview/prev.png)]]28 29 '''libsmbclient''' is a plugin for low Memory receivers. This[[br]]30 plugin has to be installed to enable smbfs setup and usage.31 [[br]][[Image(source:/ipk/source.sh4/networklib_libsmbclient_3_0_28b/preview/prev.png)]]32 33 '''networkbrowser''' allows you to use your remote control to[[br]]34 mount available NFS and CIFSsharepoints inside your local connected network.35 [[br]][[Image(source:/ipk/source.sh4/network_networkbrowser/preview/prev.png)]]36 37 '''OpenVPN''' allows a server client VPN connection. To use this plugin you have[[br]]38 to edit the configuration files and should have sophisticated knowledge in netwrok setup.39 [[br]][[Image(source:/ipk/source.sh4/network_openvpn/preview/prev.png)]]40 41 '''Samba''' is needed to include your receiver as a Windows networkdrive.[[br]]42 Using the plugin your receiver is a Samba server.43 [[br]][[Image(source:/ipk/source.sh4/network_samba/preview/prev.png)]]44 45 '''SmbClient (Win7)''' is a network browser extention for better compatibility with windows 7.46 [[br]][[Image(source:/ipk/source.sh4/networklib_smbclient/preview/prev.png)]]47 48 '''xupnpd - eXtensible UPnP agent''' is a server extension that allows you to stream video, audio files[[br]]49 and live tv from a free tuner from your receiver directly to other DLNA capable digital[[br]]50 devices attached in your home network.51 52 What can the xupnpd DLNA server? [[BR]]53 54 At every start of the current playlists bouquets and images are generated (takes a few seconds), then then starts xupnpd.55 Is a tuner free, then to the desired channel is zapped. Single tuner boxes should be in standby. In principle, the same behavior as the stream via the web interface.56 There is still the possibility to enable the option "Allow switching by Live Stream" in the web interface settings. Then xupnpd has priority. Note that switches to the station!57 58 Operation:59 Call the plugin in Extensions -> Additional Programs60 Autostart yes / no or manual start or stop with green or red61 62 [[br]][[Image(source:/ipk/source.sh4/network_xupnpd/preview/prev.png)]]63 -
wiki/pages/vn/Plugins-Player
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''10.11 Player''' [=#point10.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 '''Players''' are plugins to enable the playback of further file formats and sources.[[br]]7 below is a list of available plugins:[[br]]8 9 ----10 11 {{{#!th rowspan=0 align=left style="border: none"12 [[Image(source:/ipk/source.sh4/playersnp_codecpack/preview/prev.png,nolink)]]13 }}}14 |----------------15 {{{#!td style="border: none"16 '''CodecPack'''17 18 will enable playback of more Online media file formats such as: (flac ogg mp3 avi dat divx flv mkv m4v mp4 mov mpg mpeg mts m2ts trp ts vdr vob wmv wma wav rm ra)19 }}}20 [[BR]]21 22 {{{#!th rowspan=0 align=left style="border: none"23 [[Image(source:/ipk/source.sh4/playersnp_dtsdownmix/preview/prev.png,link=source:/ipk/source.sh4/playersnp_dtsdownmix/_path_/bin)]]24 }}}25 |----------------26 {{{#!td style="border: none"27 '''DtsDownMix'''28 29 to recode DTS Digital Audio to Stereo output.30 }}}31 [[BR]]32 33 {{{#!th rowspan=0 align=left style="border: none"34 [[Image(source:/ipk/source.sh4/playersnp_dvdplayer/preview/prev.png,link=source:/titan/plugins/dvdplayer)]]35 }}}36 |----------------37 {{{#!td style="border: none"38 '''DVD-Player'''39 40 will enable playback VOB file format to play back ripped DVD content.41 }}}42 [[BR]]43 44 {{{#!th rowspan=0 align=left style="border: none"45 [[Image(source:/ipk/source.sh4/players_gmediarender/preview/prev.png,link=source:/titan/plugins/gmediarender)]]46 }}}47 |----------------48 {{{#!td style="border: none"49 '''GmediaRender'''50 51 * GmediaRender is a __[http://de.wikipedia.org/wiki/Digital_Living_Network_Alliance Digital Media Renderer]__ (DMR / DLNA-Renderer), which allows the __PC__ /__Mobile __[http://de.wikipedia.org/wiki/Digital_Living_Network_Alliance Digital Media Controller] (DMC / DLNA-Control) to stream __Audio__ / __Video__ and __Picture__ files from a [http://de.wikipedia.org/wiki/Digital_Living_Network_Alliance Digital Media Server] (DMS / DLNA-SERVER) to your reciever.52 53 * __Windows__54 * In Windows Explorer context menu __Right-click__ on Files> Play To> __[http://gmrender.nongnu.org/ GmediaRender]__.55 * Windows Media Player is a __[http://de.wikipedia.org/wiki/Digital_Living_Network_Alliance DMS / DMP / DMS]__ and can control all __[http://de.wikipedia.org/wiki/Digital_Living_Network_Alliance DMS]__ present in the network and the media offered to __[http://gmrender.nongnu.org/ GmediaRender]__56 57 * __mobile (Android)__58 * for __[http://de.wikipedia.org/wiki/Android_%28Betriebssystem%29 Android]__ mobile there is a few __[http://de.wikipedia.org/wiki/Digital_Living_Network_Alliance DMC]__ __Apps__: __[https://play.google.com/store/apps/details?id=tv.airwire AirWire]__ / __[http://m.downloadatoz.com/apps/com.skifta.android.app,68844/download.html Skifta]__, these __Apps__ can control data from__[http://de.wikipedia.org/wiki/Digital_Living_Network_Alliance DMS]__ and the __[http://gmrender.nongnu.org/ GmediaRender]__ to control your reciever to display media on tyour TV.59 60 * A very nice feature the __[http://xupnpd.org/t/ Xupnp Server]__ is able to display your channel list and recordings by Playlist that you can then easily pass directly to the renderer or cell phone.61 [[Image(source:/titan/skins/gmediarender/skin/background.jpg,link=http://static.androidnext.de/dlna-schema-450x500.png, 480px, align=right,link=http://www.aaf-digital.info/forum/forum.php)]]62 63 * some __[http://de.wikipedia.org/wiki/Digital_Living_Network_Alliance DMS]__ can display and share __[http://de.wikipedia.org/wiki/Digital_Living_Network_Alliance DLNA]__ network such as:64 * External media / Online Channels (__[https://www.youtube.com/ Youtube]__ / __[https://www.ted.com/ Ted]__ / __[http://www.vimeo.com/ Vimeo]__)65 * Cloud Storage Hoster (__[https://www.google.com/drive/ Google Drive]__ / __[https://www.dropbox.com/ Dropbox]__ / __[https://onedrive.live.com/ OneDrive]__ / __[https://disk.yandex.com/ Yandex.Disk]__ / __[https://www.box.com/ Box]__)66 * Webcam Dienste oder im Netzwerk befindliche Überwachungs Cams.67 68 * Possibil playback from your __[http://de.wikipedia.org/wiki/Digital_Living_Network_Alliance DMC]__ from (__[https://play.google.com/store/apps/details?id=tv.airwire AirWire]__ / __[http://m.downloadatoz.com/apps/com.skifta.android.app,68844/download.html Skifta]__ / __[http://allconnectapp.com/ AllConnect]__ / __[http://bubblesoftapps.com/bubbleupnpserver/ BubbleDlna]__)69 * (some __[http://de.wikipedia.org/wiki/Digital_Living_Network_Alliance DMS]__ can control the media playback with such features as volume up/down/ Pause / Play / Stop / fast forward/ reverse)70 71 * __preview__72 * __AirWire__ __[https://play.google.com/store/apps/details?id=tv.airwire&hl=de about]__ / __[http://airwire.tv/en/site/users help]__ / __[http://airwire.tv/ Home]__73 * __BubbleDlna__ __[http://bubblesoftapps.com/bubbleupnpserver/#what_is_bubble_upnp_server About]__ / __[http://bubblesoftapps.com/bubbleupnpserver/#faq help]__ / __[http://bubblesoftapps.com/bubbleupnpserver/ Home]__74 * __Allconnect__ __[http://allconnectapp.com/presskit/ About]__ / __[http://allconnectapp.com/faq/ Help]__ / __[http://allconnectapp.com/faq/ Home]__75 76 In general __[http://de.wikipedia.org/wiki/Digital_Living_Network_Alliance DLNA]__ is a very complex network DLNA software with almost no restrictions in its operation.77 78 79 80 }}}81 [[BR]]82 83 {{{#!th rowspan=0 align=left style="border: none"84 [[Image(source:/ipk/source.sh4/playersnp_hbbtv/preview/prev.png,link=source:/titan/plugins/hbbtv)]]85 }}}86 |----------------87 {{{#!td style="border: none"88 '''HbbTv'''89 90 is a media client connect to HBB-TV Online media.91 }}}92 [[BR]]93 94 {{{#!th rowspan=0 align=left style="border: none"95 [[Image(source:/ipk/source.sh4/players_mc/preview/prev.png,link=source:/titan/plugins/mc)]]96 }}}97 |----------------98 {{{#!td style="border: none"99 '''MediaCenter'''100 101 [wiki:Interface-Operation#point3.2 Media center] to playback picutres, audio and video files102 }}}103 [[BR]]104 105 {{{#!th rowspan=0 align=left style="border: none"106 [[Image(source:/ipk/source.sh4/players_tithek/preview/prev.png,link=source:/titan/plugins/tithek)]]107 }}}108 |----------------109 {{{#!td style="border: none"110 '''Tithek'''111 112 Titannit online hoseted media (online library).113 }}}114 [[BR]]115 116 {{{#!th rowspan=0 align=left style="border: none"117 [[Image(source:/ipk/source.sh4/players_tmc/preview/prev.png,link=source:/titan/plugins/tmc)]]118 }}}119 |----------------120 {{{#!td style="border: none"121 '''Tmc'''122 123 Tmc - to playback movies from a local connected Network device124 }}}125 [[BR]]126 127 {{{#!th rowspan=0 align=left style="border: none"128 [[Image(source:/ipk/source/players_foldericons_1_0/preview/prev.png,link=source:/ipk/source/players_foldericons_1_0/_path_/usr/local/share/titan/imdbfolder)]]129 }}}130 |----------------131 {{{#!td style="border: none"132 '''FolderIcons'''133 134 to add a graphical icon to your media folders.135 }}}136 [[BR]] -
wiki/pages/vn/Plugins-Skins
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''10.14 Skins''' [=#point10.14] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 Installing one of the follwing skins will change the look of the titan interface you may select and install skins from the online extentions.[[br]]7 8 ||= '''0Acht5Zehn''' =||= '''0Acht5Zehnblack''' =||= '''0Acht5Zehnwhite''' =||= '''Cool''' =||= '''CoolMiniTV''' =||= '''Default''' =||9 ||= [[Image(source:/ipk/source/skins_0Acht5Zehn/preview/prev.png,link=source:/ipk/source/skins_0Acht5Zehn/_path_/usr/local/share/titan/skin/0Acht5Zehn)]] =||=[[Image(source:/ipk/source/skins_0Acht5Zehnblack/preview/prev.png,link=source:/ipk/source/skins_0Acht5Zehnblack/_path_/usr/local/share/titan/skin/0Acht5Zehn_black)]] =||= [[Image(source:/ipk/source/skins_0Acht5Zehnwhite/preview/prev.png,link=source:/ipk/source/skins_0Acht5Zehnwhite/_path_/usr/local/share/titan/skin/0Acht5Zehn_white)]] =||= [[Image(source:/ipk/source/skins_cool/preview/prev.png,link=source:/ipk/source/skins_cool/_path_/usr/local/share/titan/skin/cool)]] =||= [[Image(source:/ipk/source/skins_coolMiniTV/preview/prev.png,link=source:/ipk/source/skins_coolMiniTV/_path_/usr/local/share/titan/skin/coolMiniTV)]] =||= [[Image(source:/ipk/source/skinsdefault_default/preview/prev.png,link=source:/ipk/source/skinsdefault_default/_path_/usr/local/share/titan/skin/default)]]10 =||11 [[br]]12 ||= '''Default no MiniTV''' =||= '''Megastyle-Blue''' =||= '''Megastyle-Blue-MiniTV''' =||= '''MegaStyle-Grey''' =||= '''MegaStyle-Grey-MiniTV''' =||= '''MetrixHD''' =||13 ||= [[Image(source:/ipk/source/skinsdefault_defnominitv/preview/prev.png,link=source:/ipk/source/skinsdefault_defnominitv/_path_/usr/local/share/titan/skin/defnominitv)]]||= [[Image(source:/ipk/source/skins_MegaStyle_blue/preview/prev.png,link=source:/ipk/source/skins_MegaStyle_blue/_path_/usr/local/share/titan/skin/MegaStyle-Blue)]] =||=[[Image(source:/ipk/source/skins_MegaStyle_blue_MiniTV/preview/prev.png,link=source:/ipk/source/skins_MegaStyle_blue_MiniTV/_path_/usr/local/share/titan/skin/MegaStyle-Blue-MiniTV)]] =||= [[Image(source:/ipk/source/skins_MegaStyle_grey/preview/prev.png,link=source:/ipk/source/skins_MegaStyle_grey/_path_/usr/local/share/titan/skin/MegaStyle-Grey)]] =||= [[Image(source:/ipk/source/skins_MegaStyle_grey_MiniTV/preview/prev.png,link=source:/ipk/source/skins_MegaStyle_grey_MiniTV/_path_/usr/local/share/titan/skin/MegaStyle-Grey-MiniTV)]] =||= [[Image(source:/ipk/source/skins_MetrixHD/preview/prev.png,link=source:/ipk/source/skins_MetrixHD/_path_/usr/local/share/titan/skin/MetrixHD)]]14 =||15 [[br]]16 ||= '''NoGfx''' =||= '''NoGfx Grey''' =||= '''SmartTV''' =||= '''tobayer01''' =||= '''ufs912''' =||17 ||= [[Image(source:/ipk/source/skins_nogfx/preview/prev.png,link=source:/ipk/source/skins_nogfx/_path_/usr/local/share/titan/skin/nogfx)]]=||= [[Image(source:/ipk/source/skins_nogfx_grey/preview/prev.png,link=source:/ipk/source/skins_nogfx_grey/_path_/usr/local/share/titan/skin/nogfx_grey)]] =||=[[Image(source:/ipk/source/skins_smartTV/preview/prev.png,link=source:/ipk/source/skins_smartTV/_path_/usr/local/share/titan/skin/smartTV)]] =||= [[Image(source:/ipk/source/skins_tobayer01/preview/prev.png,link=source:/ipk/source/skins_tobayer01/_path_/usr/local/share/titan/skin/tobayer01)]] =||= [[Image(source:/ipk/source/skins_ufs912/preview/prev.png,link=source:/ipk/source/skins_ufs912/_path_/usr/local/share/titan/skin/ufs912)]]18 =||19 20 ([#point10.14 Top of Page]) -
wiki/pages/vn/Ram
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6 Ram''' [=#point3.7.8.6] ([wiki:System-Info#point3.7.8 System Info (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/System-Info-Ram.jpg)]][[br]]7 >8 Here you can view the memory information.9 10 [[br]]11 12 13 [[br]] -
wiki/pages/vn/Receiver-Unlock
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.10 Receiver Unlock''' [=#point3.5.10] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/system_receiver_unlock.jpg)]][[br]]8 >9 >Here you can unlock the special features of the decoder after purchase.10 11 [[br]] -
wiki/pages/vn/Record-Path
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.6.8 Record Path''' [=#point3.6.8] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Record_Path.jpg)]][[BR]]8 >9 > here you can recording directorys.10 11 [[br]]12 13 ||'''Movie Path''' ||This is the path to the Movie Directory.||14 ||'''Timer Record Path:''' ||This is the path to the directory where the timer recordings are stored.||15 ||'''Record Patht''' ||This is the path to the directory where the manual recordings are stored.||16 ||'''Timeshift Path:''' ||This is the path to the directory where the Timeshift files are stored.||17 ||'''Stream Path''' ||This is the path to the directory where temporary Streams are stored.||18 19 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.20 21 [[br]]22 ----23 24 '''Coloured Button's Functions"25 26 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.27 please see below for more info on the functions of these buttons:.28 29 ||'''Red Button: (Edit)''' ||This button allows editing of the above paths it will bring up an onscreen keyboard to edit the string selected.||30 -
wiki/pages/vn/Records
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.1.5 Records''' [=#point3.1.5] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Records.jpg)]][[BR]]8 >9 >Recordings is where you can set up and edit timer set recordings.10 11 12 [[br]]13 14 ----15 16 '''Coloured Button's Functions"17 18 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.19 please see below for more info on the functions of these buttons:.20 21 ||'''Red Button: (Del)''' ||This will delete the currently selected timer or recording.||22 ||'''Green Button: (Add)''' ||this will add a new timer recording.||23 ||'''Yellow Button: (Stop/ Start)''' ||this will stop or start the currently selected timer recording.||24 ||'''Blue Button: (log)''' ||This will show you the past log file for the past timer recordings.||25 -
wiki/pages/vn/Red-Button
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.6.4 Red Button''' [=#point3.6.4] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0.2 Contents]) ([WikiStart#point0 Main page])4 5 >6 >Menu Picture place holder:7 >8 >[[Image(source:/wiki/Wiki-Pictures/VN/Red_Button.jpg)]][[BR]]9 >10 >here you can configure what happens with the press of the red button11 12 13 [[br]] -
wiki/pages/vn/Remote-Device-Control
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''4 Remote/ Device control''' [=#point4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 New Gui section work in progress expect dead links or missing data.5 ----6 == Remote/ Device control ==7 8 This section contains information about how to control your decoder and how it can be controlled from local and remote sources and helpfull information and tricks to get the most possible experience with your Receiver.9 10 11 ''Please select a menu item from the GUI for more information''12 13 ----14 {{{#!div style="width: 1100px; margin: auto"15 {{{#!table style="border: none"16 {{{#!td align=center valign=top style="border: none; font-size: 115%"17 {{{#!div style="float: left"18 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Remote-Device-Control/Remote_Control.png,align=left,link=[#point4.1])]]19 }}}20 '''[wiki:Remote-Device-Control#point4.1 4.1 RC Remote control]'''[[br]]21 {{{#!div style="float: left22 click here to find info on setting up the language23 }}}24 }}}25 {{{#!td align=center valign=top style="border: none; font-size: 115%"26 {{{#!div style="float: left"27 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Remote-Device-Control/On_Device_control.png,align=left,link=[#point4.2])]]28 }}}29 '''[wiki:Remote-Device-Control#point4.2 4.2 On Device Control]'''[[br]]30 {{{#!div style="float: left31 click here to find info on setting up the Network32 }}}33 }}}34 {{{#!td align=center valign=top style="border: none; font-size: 115%"35 {{{#!div style="float: left"36 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Remote-Device-Control/Web_Interface.png,align=left,link=[#point4.3])]]37 }}}38 '''[wiki:Remote-Device-Control#point4.3 4.3 Web Interface]'''[[br]]39 {{{#!div style="float: left40 click here to find info on setting up the HDD41 }}}42 }}}43 |---44 {{{#!td align=center valign=top style="border: none; font-size: 115%"45 {{{#!div style="float: left"46 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Remote-Device-Control/Telnet_Control.png,align=left,link=[#point4.4])]]47 }}}48 '''[wiki:Remote-Device-Control#point4.4 4.4 Telnet Control]'''[[br]]49 {{{#!div style="float: left50 click here to find info on Setting Up the Tuner51 }}}52 }}}53 {{{#!td align=center valign=top style="border: none; font-size: 115%"54 {{{#!div style="float: left"55 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Remote-Device-Control/Rgui.png,align=left,link=[#point4.5])]]56 }}}57 '''[wiki:Remote-Device-Control#point4.5 4.5 Rgui]'''[[br]]58 {{{#!div style="float: left59 click here to find info Proforming a Scan60 }}}61 }}}62 {{{#!td align=center valign=top style="border: none; font-size: 115%"63 {{{#!div style="float: left"64 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Remote-Device-Control/Bootloader.png,align=left,link=[#point4.6])]]65 }}}66 '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader]'''[[br]]67 {{{#!div style="float: left68 click here to find info on Orginising Your Channels69 }}}70 }}}71 |---72 {{{#!td align=center valign=top style="border: none; font-size: 115%"73 {{{#!div style="float: left"74 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Remote-Device-Control/TitanNit_WebIF.png,align=left,link=[#point4.7])]]75 }}}76 '''[wiki:Remote-Device-Control#point4.7 4.7 TitanNit WebIF]'''[[br]]77 {{{#!div style="float: left78 click here to find info on Setting Up a Media79 }}}80 }}}81 {{{#!td align=center valign=top style="border: none; font-size: 115%"82 {{{#!div style="float: left"83 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Remote-Device-Control/FTP.png,align=left,link=[#point4.8])]]84 }}}85 '''[wiki:Remote-Device-Control#point4.8 4.8 FTP (File Transfer Protocol)]'''[[br]]86 {{{#!div style="float: left87 click here to find info Playing Back Media88 }}}89 }}}90 {{{#!td align=center valign=top style="border: none; font-size: 115%"91 {{{#!div style="float: left"92 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Remote-Device-Control/Autostart_Scripting.png,align=left,link=[#point4.9])]]93 }}}94 '''[wiki:Remote-Device-Control#point4.9 4.9 Autostart Scripting (usercmd.sh)]'''[[br]]95 {{{#!div style="float: left96 Conclusion/ what to do next after stting up Titan97 }}}98 }}}99 100 }}}101 }}}102 [[br]]103 [[br]]104 105 106 107 ----108 '''4.1 RC Remote Control''' [=#point4.1] ([#point4 top of the page])109 110 ----111 * ([#point4.1.1 RC Atevio700])112 * ([#point4.1.2 RC Atevio7000, Atevio7500, Atemio7600])113 * ([#point4.1.3 RC Atemio500, Atemio510])114 * ([#point4.1.4 RC Atemio520])115 * ([#point4.1.5 RC Atemio520-V2])116 * ([#point4.1.6 RC Atemio530])117 118 * ([#point4.1.7 RC UFS910])119 * ([#point4.1.8 RC UFS912])120 * ([#point4.1.9 RC UFS922])121 122 [[BR]]123 [[BR]]124 [[BR]]125 126 127 128 129 '''4.1.1 RC Remote Control Atevio700''' [=#point4.1.1] ([#point4.1 back])130 [[BR]]131 {{{#!th rowspan=0 align=left style="border: none"132 [[Image(source:/titan/web/img/rc.atevio700.png)]][[br]]133 }}}134 |----------------135 {{{#!td style="border: none"136 137 '''TEXT RC Atevio 700'''138 139 }}}140 141 [[br]]142 [[br]]143 [[br]]144 145 146 147 '''4.1.2 RC Remote Control Atevio7000, Atevio7500, Atemio7600''' [=#point4.1.2] ([#point4.1 back])148 [[BR]]149 {{{#!th rowspan=0 align=left style="border: none"150 [[Image(source:/titan/web/img/rc.atevio7000.png)]][[br]]151 }}}152 |----------------153 {{{#!td style="border: none"154 The section contains information on the functions and operation of your remote control unit.155 156 '''Special Function Buttons operation during channel streaming'''157 158 159 ||'''Resolution:''' ||This Key Switches the videomode.||160 ||'''V.Format:''' ||This Key Switches the Video format.||161 ||'''Recall:''' ||This key can bring up the recent channel history so you can jump easily between programs.||162 ||'''Info:''' ||This Button displays the infobar.||163 ||'''fav:''' ||This button brings up the favourite and Bouquet lists to easily select programs.||164 ||'''Menu:''' ||This key opens the menu.||165 ||'''Sleep:''' ||This Key can setup the sleep timer.||166 ||'''Help:''' ||This key can display detailed information and help text's.||167 ||'''Exit:''' ||This key exits menus and popups .||168 ||'''text:''' ||This key shows the teletext display.||169 ||'''Ok:''' ||This button confirms menu items and popups.||170 171 [[br]]172 173 '''Programming the universal remote to operate a supported TV'''174 175 This section explains how to automatically search and program your universal remote control to operate your tv176 177 NOTE: If there are no inputs for 10 seconds during setting the TV RC code the setting mode is terminated.178 179 '''Automatic code search '''180 181 * Press the TV / Atevio button on the remote (for at least 3 seconds) until the LED flashes twice.182 183 Enter the code 001. The LED flashes twice to confirm the entry.184 185 * Press and hold the "ON / OFF" button until the TV turns off.186 187 Note: The LED flashes every 1.5 seconds and sends a new TV power rc code.188 189 * Release the button immediately then press the "OK" button to store the TV code.190 191 (This can take up to 15 minutes to cycle all the tv's pre programmed in to the remote from the factory)192 193 If you dont let go of the power key in time it will step to the next RC Power button code if this happens use the D-Pad down to rewind 5 codes to attempt to store the code again.194 195 * To interrupt the search mode, press the Exit button for 2 seconds and return to normal operation or wait for 10 seconds with no key presses.196 197 * The remote control blinks 5 times at the end of the list if the tv has not turned off by the time your tv is not a supported model.198 199 '''Reset remote to factory programming'''200 201 This will reset the remote back to a factory non programmed state, this is necessary if the remote needs to be reprogrammed to operate a new TV and was previously programmed.202 203 * Press the TV / Atevio button on the remote (for at least 3 seconds) until the LED flashes twice.204 205 * Enter the code 000.206 207 * The LED flashes twice to confirm the entry. The remote control will now be reset (no code programmed)208 209 210 }}}211 212 [[br]]213 [[br]]214 [[br]]215 216 '''4.1.3 RC Remote Control Atemio 500 / Atemio 510''' [=#point4.1.3] ([#point4.1 back])217 [[BR]]218 {{{#!th rowspan=0 align=left style="border: none"219 [[Image(source:/titan/web/img/rc.atemio510.png)]][[br]]220 }}}221 |----------------222 {{{#!td style="border: none"223 224 '''TEXT RC Atemio 500/510'''225 226 }}}227 228 [[br]]229 [[br]]230 [[br]]231 232 '''4.1.4 RC Remote Control Atemio 520''' [=#point4.1.4] ([#point4.1 back])233 [[BR]]234 {{{#!th rowspan=0 align=left style="border: none"235 [[Image(source:/titan/web/img/rc.atemio520.png)]][[br]]236 }}}237 |----------------238 {{{#!td style="border: none"239 240 '''TEXT RC Atemio 520'''241 242 }}}243 244 [[br]]245 [[br]]246 [[br]]247 248 '''4.1.5 RC Remote Control Atemio 520 V2''' [=#point4.1.5] ([#point4.1 back])249 [[BR]]250 {{{#!th rowspan=0 align=left style="border: none"251 [[Image(source:/titan/web/img/rc.atemio520-V2.png)]][[br]]252 }}}253 |----------------254 {{{#!td style="border: none"255 256 '''TEXT RC Atemio 520-V2'''257 258 }}}259 260 [[br]]261 [[br]]262 [[br]]263 264 '''4.1.6 RC Remote Control Atemio 530''' [=#point4.1.6] ([#point4.1 back])265 [[BR]]266 {{{#!th rowspan=0 align=left style="border: none"267 [[Image(source:/titan/web/img/rc.atemio530.png)]][[br]]268 }}}269 |----------------270 {{{#!td style="border: none"271 272 '''TEXT RC Atemio 530'''273 274 }}}275 276 [[br]]277 [[br]]278 [[br]]279 280 281 '''4.1.7 RC Remote Control Kathrein UFS910''' [=#point4.1.7] ([#point4.1 back])282 [[BR]]283 {{{#!th rowspan=0 align=left style="border: none"284 [[Image(source:/titan/web/img/rc.ufs910.png)]][[br]]285 }}}286 |----------------287 {{{#!td style="border: none"288 289 '''TEXT RC UFS 910'''290 291 }}}292 293 [[br]]294 [[br]]295 [[br]]296 297 298 299 300 '''4.1.8 RC Remote Control Kathrein UFS912''' [=#point4.1.8] ([#point4.1 back])301 [[BR]]302 {{{#!th rowspan=0 align=left style="border: none"303 [[Image(source:/titan/web/img/rc.ufs912.png)]][[br]]304 }}}305 |----------------306 {{{#!td style="border: none"307 308 '''TEXT RC UFS912'''309 310 }}}311 312 [[br]]313 [[br]]314 [[br]]315 316 317 318 '''4.1.9 RC Remote Control Kathrein UFS922''' [=#point4.1.9] ([#point4.1 back])319 [[BR]]320 {{{#!th rowspan=0 align=left style="border: none"321 [[Image(source:/titan/web/img/rc.ufs922.png)]][[br]]322 }}}323 |----------------324 {{{#!td style="border: none"325 326 '''TEXT RC UFS922'''327 328 }}}329 330 [[br]]331 [[br]]332 [[br]]333 334 335 336 [[br]]337 ----338 '''4.2 On Device Control''' [=#point4.2] ([#point4 top of the page])339 340 ----341 342 343 [[Image(source:/wiki/Wiki-Pictures/VN/On_Device_Control.jpg)]][[br]]344 345 The section contains information on the functions and operation of your Receiver from the onboard buttons.346 Please note: the control is very limited from the on device controls but simple menu and tv control's can be made:347 348 '''Device Controll keys'''349 350 351 ||'''Power''' ||This Key Switches to the power menu or shuts down depending on the "power action" see ([#point3.6.6 Adjust]) for more info. ||352 ||'''Menu:''' ||This Key brongs up the on screen display/ menu. ||353 ||'''Ok:''' ||This key accept on screen prompts. ||354 ||'''D-pad:''' ||These buttons can control the volume and TV channel when on the TV display it can also be used to navigate the menu and on screen prompts. ||355 356 ----357 '''4.3 Web Interface''' [=#point4.3] ([#point4 top of the page])358 ----359 360 [[Image(source:/wiki/Wiki-Pictures/VN/Web_Control.jpg)]][[br]]361 362 The section contains information on the functions and operation of your Receiver from the web interface over LWAN, LAN or wifi.363 364 [[br]]365 366 ----367 '''4.3.1 Channel list''' [=#point4.3.1] ([#point4 top of the page])368 ----369 370 [[br]]371 372 ||'''All''' ||Show All Channels from all Bouquets .||373 ||'''Sat''' ||Sort channels By Satellite.||374 ||'''provider:''' ||Sort channels By provider.||375 ||'''A-Z:''' ||Sort channels Alphabetically.||376 ||'''Bouquets:''' ||Sort channels By Boquet.||377 378 379 [[br]]380 ----381 '''4.3.2 Box Control''' [=#point4.3.2] ([#point4 top of the page])382 ----383 384 [[br]]385 386 ||'''Power Control:''' ||This brings up the links to control the power settings (shutdown, restart, etc....)||387 ||'''Message:''' ||Send a message to the display of the tv.||388 ||'''Remote:''' ||Bring up the remote on the web page for control of the decoder.||389 ||'''Screenshot OSD:''' ||Take a screen shot of the OSD.||390 ||'''Play Movie (URL:''' ||Play a movie from the selected url.||391 392 [[br]]393 ----394 '''4.3.3 Movies''' [=#point4.3.3] ([#point4 top of the page])395 ----396 397 [[br]]398 399 This will bring up a list of the movie directory on the receiver please see ([#point3.12.5 Web Controls]) for more information400 401 [[br]]402 ----403 '''4.3.4 Timer''' [=#point4.3.4] ([#point4 top of the page])404 ----405 406 [[br]]407 408 ||'''Timer List:''' ||Show a list of the timer Recordings.||409 ||'''Timer Archive:''' ||Show a list of all the completed timer recordings.||410 ||'''Add Timer:''' ||Add a timer recording.||411 412 [[br]]413 ----414 '''4.3.5 System''' [=#point4.3.5] ([#point4 top of the page])415 ----416 417 [[br]]418 419 ||'''Extensions:''' ||Show a list of alailable extensions and plugins to install.||420 ||'''System update:''' ||Update the system software.||421 ||'''System Backup:''' ||backup the system to an image file.||422 ||'''Settings Backup/ restore:''' ||Take/ restore a backup of the current settings and config.||423 424 [[br]]425 ----426 '''4.3.6 Settings''' [=#point4.3.6] ([#point4 top of the page])427 ----428 429 [[br]]430 431 ||'''system settings:''' ||This brings up a list of the items in the adjust menu of the receiver See [wiki:Adjust#point3.6.6 Adjust] for more information on the items in this menu.||432 ||'''Oscam web interface:''' ||Shows config http information for the oscam plugin (if installed).||433 ||'''Xupnpd:''' ||Shows information on the Xupnpd media streaming plugin.||434 435 [[br]]436 ----437 '''4.3.7 Information''' [=#point4.3.7] ([#point4 top of the page])438 ----439 [[br]]440 441 This section contains detailed config and system info about your reciever and TitanNit.442 Please see the below links for more information on the items contained with in this menu.443 444 * ([wiki:Service#point3.7.1 Service])445 * ([wiki:News-letter#point3.7.2 News letter])446 * ([wiki:About#point3.7.3 About])447 * ([wiki:Streaming#point3.7.4 Streaming])448 * ([wiki:Atemio-Hotline#point3.7.5 Atemio (Hotline)])449 * ([wiki:Titan-Changelog#point3.7.6 Titan Changelog])450 * ([wiki:Git-Changelog#point3.7.7 Git Changelog])451 * ([wiki:System-Info#point3.7.8 System Info])452 * ([wiki:Log#point3.7.9 Log])453 454 [[br]]455 ----456 '''4.3.8 Help''' [=#point4.3.8] ([#point4 top of the page])457 ----458 459 [[br]]460 461 ||'''Offline help:''' ||Currently this has no function and is for future use.||462 ||'''Online help:''' ||Shows this wiki from the web interface for help and support.||463 464 465 [[br]]466 ----467 '''4.3.9 Web Controls''' [=#point4.3.9] ([#point4 top of the page])468 ----469 470 [[br]]471 472 '''Filelist Display Web Buttons'''473 474 This section explains the functions and discriptions of the icons displayed on the web page along side the file list display.475 476 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Webstream.png)]] ||This button plays the selected program (web Stream) ||477 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Stream.png)]] ||This button plays the selected program (Stream) ||478 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Delete.png)]] ||This button deletes the selected program ||479 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Edit.png)]] ||This button downloads the selected program ||480 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Singleepg.png)]] ||This button displays the (EPG) ||481 ||[[Image(source:/wiki/Wiki-Pictures/VN/web_radio.png)]] ||This button shows the selected channel is audio only (radio)||482 ||[[Image(source:/wiki/Wiki-Pictures/VN/web_tv.png)]] ||This button shows the selected channel is audio and video (TV)||483 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Cross.png)]] ||This button shows the selected channel is not available ||484 485 486 '''Other Web Buttons'''487 488 This section explains the functions and discriptions icons displayed on the web page title area.489 490 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Rcopen.png)]] ||This button shows or hides the onscreen remote control ||491 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Poweroff.png)]] ||This button turns off the Receiver ||492 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Restart.png)]] ||This button restarts the Receiver ||493 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Guirestart.png)]] ||This button restarts the GUI ||494 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Standby.png)]] ||This button puts the receiver into standby ||495 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Speak_On.png)]] ||This button mute's the sound ||496 ||[[Image(source:/wiki/Wiki-Pictures/VN/web_led_on.png)]] ||These buttons select the volume 10 to 100% (left to right) ||497 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Record.png)]] ||This button starts a Recording ||498 ||[[Image(source:/wiki/Wiki-Pictures/VN/Web_Signal.png)]] ||This button shows the signal info's ||499 ||EPG Search ||This box enables you to search the EPG type your test into the box and press enter. ||500 501 [[br]]502 ----503 504 To open the web interface, use an Internet browser and enter the ip address of your decoder in the adress bar as follows: you may find your ip adress from the system information/network display.505 506 http:// IP.of.receiver507 508 [[br]]509 510 511 ----512 '''4.4 Telnet Control''' [=#point4.4] ([#point4 top of the page])513 ----514 515 516 [[Image(source:/wiki/Wiki-Pictures/VN/Telnet_Control.jpg)]][[br]]517 518 The section contains information on the operation of your Receiver over a telnet session.519 520 '''Telnet Setup'''521 522 * Eithernet Interface Telnet Setup523 524 1 A Network connection must be active525 526 2 Install the client found here: ([http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty]).527 528 3 Find the IP address from the system info ([wiki:Network#point3.7.8.5 Network]) section529 530 4 Insert the IP address info into the telnet client531 532 5 Click connect.533 534 [[br]]535 536 * Serial Interface Telnet Setup537 538 1 Connect a null modem cable between the Receiver and PC539 540 2 Install the client found here: ([http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty])541 542 3 Set up the serial port connection parameters543 544 4 Click connect.545 546 After the above steps are completed you will now be presented with a console where you can login to your Receiver with a username and password.547 548 after entering your login information there are a few receiver specific functions that may be handy if you require information on basic telnet commands i suggest you have a look on [http://www.linux.org linux.org]549 550 '''Remote RC debugging'''551 {{{552 #!python553 killall -9 evremote2554 evremote2555 }}}556 [[br]]557 558 '''Start FTDI driver'''559 {{{560 #!python561 mknod / dev.static/ttyUSB0 c 188 0"562 }}}563 [[br]]564 565 '''Test FTDI driver commands'''566 {{{567 #!python568 ls-al / dev/ttyUSB0569 }}}570 [[br]]571 572 {{{573 #!python574 cat /proc/bus/usb/devices575 }}}576 [[br]]577 578 {{{579 #!python580 lsmod | grep usbserial581 }}}582 [[br]]583 584 '''Take a screen shot'''585 {{{586 #!python587 /sbin/grab -j 100 -r 960 /tmp/000.jpg588 }}}589 590 ----591 '''4.5 Rgui''' [=#point4.5] ([#point4 top of the page])592 ----593 [[br]]594 595 [[Image(source:/wiki/Wiki-Pictures/VN/Mainmenu.jpg)]][[br]]596 597 598 RGui is a TitanNit plugin which allows you to operate your Receiver from a different Receiver. Only the Gui is completely transmitted.599 600 Thus one can operate the receiver remotely, but not stream the TV signal.601 602 [[br]]603 604 605 606 607 608 ----609 '''4.6 Bootloader''' [=#point4.6] ([#point4 top of the page])610 ----611 [[br]]612 613 [[Image(source:/wiki/Wiki-Pictures/VN/On_Device_Control.jpg)]][[br]]614 615 616 == Iboot is a boot loader. ==617 618 "written by Solala based on based on the project uboot by wolfgang denk [http://www.denx.de]" (Iboot is included in versions of TitanNit from 1.32 for the atemio and atevio receivers) [[br]]619 Please note that there is differences between the Iboot menu structure on the different models of decoders.620 621 ''' Functions of the boot loader:'''622 623 * Identification of the Hardware624 * Starting the Image625 626 627 ''' Iboot early startup menu '''628 629 To enter the Iboot startup menu shutdown the receiver and power up pressing the __"Menu"__ button on the remote control.630 Iboot will then startup showing __"Flash Menu"__ on the VFDisplay from here you may scroll through the list of available menu items using the D-pad -OK- and -Exit- buttons on the RC Remote.631 632 633 ----634 ''' Expert Mode ''' (not present in av700/7000)635 ----636 637 [[br]]638 639 Expert mode is a setting allowing you to enable the advanced menu in Iboot that are hidden by default as these extra setting's enable such features as overclocking that could void your warranty.640 641 To switch Iboot into __"Expert Mode"__ Shutdown the receiver and power up pressing the __"Menu"__ button on the remote control .642 Iboot will then startup showing __"Flash Menu"__ on the VFDisplay643 644 now using D-pad left / right select __"SETTINGS"__ and with up / down button select __"set OSD color"__ and click __"OK"__645 now using the left and right D-pad buttons left / right to change the colors646 with up / down set the colors individually to647 648 for the '''AM 510/AM520 ''' the code is649 650 * Red = 11651 652 * Green = 47653 654 * Blue = 11655 656 for the '''AM 7500/7600 ''' the code is657 658 * Red = 7659 660 * Green = 10661 662 * Blue = 5663 664 665 Then press the __"Exit"__ button twice to return to the menu __"Flash"__ the display on the TV screen should now show:666 667 ''' ! YOU ACTIVATED EXPERT MODE ! ''' - expert mode enabled668 669 ''' ! NO WARRANTY ----- USE AT YOUR OWN RISK ! ''' No warranty - use at your own risk670 671 if you dont agree : execute ''' " Clean Environment Sector" ''' in the FLASH MENU672 673 if you do not want to lose the warranty, you must run ''' " Clean Environment Sector" ''' in the FLASH MENU674 675 [[br]]676 677 ----678 '''4.6.1 Main categories'''' [=#point4.6.1] [#point4.6 (back)]679 ----680 Please select an item below to see more information.681 682 [#point4.6.2 (Menu Flash)]683 684 [#point4.6.3 (Settings)]685 686 [#point4.6.4 (Menu Misc)]687 688 [#point4.6.5 (Menu Net)] (not present in av700/7000)689 690 691 == Subcategories ==692 693 ----694 '''4.6.2 Menu Flash ''' [=#point4.6.2] [#point4.6 (back)]695 696 ||'''USB IRDupdt Image''' ||flash (depending on SETTINGS > Select USB / SATA dev 1-4) via USB stick or USB HDD from sda1 (standard).||697 ||'''USBirds list''' ||If several ird Image's are on the USB stick, you can display them, select and then flash the desired one. ||698 ||'''Clean environment Sector''' ||Resets the bootargs and resets Iboot to the default settings this disables __"Expert Mode"__. ||699 ||'''Clean flash ! Include swap''' ||Deletes the entire image, including the swap area, so all settings, plugins, backups, etc.... are removed. ||700 ||'''SATA IRDupdt''' ||look for an ird image on the internal or an external SATA hdd / flash stick (not present in av700/7000). ||701 ||'''list SATAirds''' ||When multiple ird Images are stored on the internal or external SATA hdd / flash stick, you can display them select and then flash the desired one (not present in av700/7000). ||702 ||'''7 . Allow Iboot Update''' ||This is a developer option included in development bootloaders so you just can flash the ird image ignoring the included boot loader if you wish this setting is not present in av700/7000). ||703 704 [[br]]705 706 ----707 '''4.6.3 Menu Settings ''' [=#point4.6.3] [#point4.6 (back)]708 709 ||'''Turbosw'''||Select overclocking speeds available settings are (0)265, (1)265, (2)297, (3)297, (4)333, (5)333, (6)364, (7)364. ||710 ||'''Timeout'''||Delay befor selecting the default boot option. ||711 ||'''USB Sleep'''||???. ||712 ||'''Scroll Speed'''||How fast the VFDisplay module moves. ||713 714 [[br]]715 716 ----717 '''4.6.4 Menu Misc''' [=#point4.6.4] [#point4.6 (back)]718 719 ||'''Disclaimer''' ||Shows the info on the bootloader. ||720 ||'''Serial Console''' ||Enables Bootloader serial debugging. ||721 ||'''Reset Board'''||Resets the Receiver and restarts boot process. ||722 723 724 725 726 727 [[br]]728 729 ----730 ''' Menu Net ''' [=#point4.6.5] [#point4.6 (back)]731 732 Please note menu item has been superceded and now has no function and it can be ignored. [[br]]733 Due to image updates the network setting does not need to be passed on by the bootloader.734 735 [[br]]736 737 738 ----739 '''4.7 TitanNit Web-IF (Htmlapi)''' [=#point4.7] ([#point4 top of the page])740 ----741 742 [[Image(source:/wiki/Wiki-Pictures/VN/Web_Control.jpg)]][[br]]743 744 The section contains information on the operation and control of your decoder from the Htmlapi.745 746 [[br]]747 748 TitanNit provides its own Htmlapi that is freely distributed so that other developers may interface with a receiver running titan.749 750 751 The Htmlapi is very simple to implement an example message structure is as follows:752 753 * query?param¶m&... for html output754 755 * queryraw?param¶m&... for raw-struct output756 757 758 For example if you would wish to send a RC remote keypress of the "Mute" key the message format would be as follows:759 760 * __query?sendrc&rcmute__761 762 763 if you would like to retrieve a list of all the current satelites the format would be as follows:764 765 * __queryraw?getsat__766 767 768 the output message back from the Receiver would be as follows:769 770 * __satname#orbitalpos__771 and an example raw output would be:772 773 > {{{Optus_d2#160}}}[[br]]774 > {{{Optus_d1#166}}}[[br]]775 > {{{Intelsat_IS19#156}}}[[br]]776 777 ''more information on the protocol and the query strings can be found here [http://sbnc.dyndns.tv/trac/browser/titan/doc/htmlapi.txt htmlapi.txt]''778 779 [[br]]780 781 ----782 '''4.8 FTP (File Transfer Protocol)''' [=#point4.8] ([#point4 top of the page])783 ----784 785 [[Image(source:/wiki/Wiki-Pictures/VN/Filezilla.jpg)]][[br]]786 787 The section contains information on how to setup a FTP connection to your TitanNit Receiver.788 789 [[br]]790 791 Titan Has an inbuilt FTP Server that is able to be used to transfer files to and from your Receiver.792 793 To connect to your receiver you can connect via your browser in windows or use a dedicated FTP program as with many linux programs the default password and user name is "root" and port 21 is the default FTP interface port.794 795 You connect to your receiver via internet explorer on your pc to do this you need to find the IP address fo the decoder from the system information menu [wiki:System-info-Network#point3.7.8.4 Network Information] of your receiver and type it into the address bas as follows:796 797 {{{ftp://Username:Password@Ip_Address:Port_Number}}}798 799 {{{ftp://root:root@192.168.0.1:21}}}800 801 if you Wish to use a dedicated FTP program please read the documentation supplied with your program for information on setup of the FTP connection, Below is a screen shot of Filezilla a popular Free FTP client Program with a sample loggin details of my Receiver.802 803 [[Image(source:/wiki/Wiki-Pictures/VN/FileZilla-Setup.jpg)]][[br]]804 805 ----806 '''4.9 autostart scripting (usercmd)''' [=#point4.9] ([#point4 top of the page])807 ----808 809 If you wish to run a script on startup of the Receiver you can install commands in the usercmd.sh to be proformed at the startup of the receiver.810 811 a sample of the usercmd.sh is below:812 813 {{{814 #!python815 #! / bin / sh816 # Start the user commands here817 echo " [ usercmd.sh ] start"818 # insert code here819 exit820 }}}821 822 the {{{__"# insert code here"__}}} section must be replaced by your commands.823 824 If you place the following code in to the usercmd.sh it will delete every time shift file on the internal hdd on startup of the receiver:825 826 {{{827 #!python828 rm -f /media/hdd/movie/timeshift*.ts829 }}}830 831 If you place the following code in to the usergmd.sh it will autostart the FTDI driver.832 {{{833 #!python834 mknod / dev.static/ttyUSB0 c 188 0"835 }}}836 [[br]]837 838 839 the full path to the file is:840 __"/mnt/config/usercmd.sh"__841 842 843 844 845 846 -
wiki/pages/vn/Restore-Default-Settings
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.6.13 Restore Default Settings''' [=#point3.6.13] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Restore_Default_Settings.jpg)]][[BR]]8 >9 >here you can return your device to the default settings.10 11 [[br]]12 13 ||'''Restore Default Settings:''' ||This will restore the settings to the factory default condition.||14 ||'''Format MNT With Backup / Restore:''' ||This will format the Mount partition after preforming a backup thern it will restore the restore the backup retaining your settings.||15 ||'''Format MNT (all):''' ||This will format the Mount partition deleting all settings to default condition.||16 17 18 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.19 20 [[br]]21 ---- -
wiki/pages/vn/Screensaver-Adjust
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.6.8 Screensaver Adjust''' [=#point3.6.8] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/Screensaver_Adjust.jpg)]][[BR]]7 >8 >Here you can setup your screen saver9 10 [[br]]11 12 13 14 ||'''Screensaver''' ||enable or disable the screensaver display||15 ||'''Screensaver Delay:''' ||Set the delat time before the screen saver is displayed.||16 ||'''Screensaver Interval:''' ||Set the display time of the Screensaver in multi Pic Mode.||17 ||'''Screensaver Type:''' ||Select the type of Screensaver to display on the screen.||18 ||'''Screensaver Background:''' ||Select the background during display of the Screensaver.||19 ||'''Screensaver Pic:''' ||IN Image mode select the picture to Display as the Screensaver.||20 21 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.22 23 [[br]]24 ---- -
wiki/pages/vn/Single-EPG
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.1.2 Single EPG''' [=#point3.1.2] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >[[Image(source:/wiki/Wiki-Pictures/VN/Single_EPG.jpg)]][[BR]]6 >7 Single EPG is a small easy to read vertical epg of a single channel that shows the information of the currently selected program.8 9 10 11 [[br]]12 13 14 '''Coloured and Extra Button's Functions"15 16 The __"Coloured and Extra Buttons"__ along the bottom of the display bring up additional menus and options with in the Single EPG menu.17 please see below for more info on the functions of these buttons:.18 19 ||'''Red Button: (Timer)''' ||This will bring up the recording timer menu to set up a timer.||20 ||'''0 key (EPG Search):''' ||This will search the EPG for text you specify and bring up a list of matches where you may press the red button to set up a timer.||21 22 For information on setting up a timer Recording using the red button see ([wiki:Records Records]) for more info.23 24 For information on setting proforming an EPG search using the 0 Key see ([wiki:EPG-Search#point103.10.5 EPG Search]) for more info. -
wiki/pages/vn/Skin-Adjust
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.6.7 Skin Adjust''' [=#point3.6.7] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Skin_Adjust.jpg)]][[BR]]8 >9 >Here you can edit your skin display settings10 11 [[br]]12 13 ||'''Font Zize Adjust in Pixel''' ||Adjust the size of the fonts in the GUI.||14 ||'''Listbox Select:''' ||Select the display mode of the listbox select bar.||15 ||'''OSD Transparancy:''' ||Set the transpancy of the OSD when it is overlaying the TV display.||16 ||'''OSD Left Overscan:''' ||Set the value of the OSD overscan on the left edge of the display.||17 ||'''OSD Right Overscan:''' ||Set the value of the OSD overscan on the right edge of the display.||18 ||'''OSD Top Overscan:''' ||Set the value of the OSD overscan on the top edge of the display.||19 ||'''OSD Bottom Overscan:''' ||Set the value of the OSD overscan on the bottom edge of the display.||20 ||'''Show Hdd Freespace:''' ||show the Hdd Free space in the OSD. ||21 ||'''Listbox Select Colour:''' ||Press the red button to bring up a colour selection to display for the listbox select bar. ||22 23 24 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.25 26 [[br]]27 ---- -
wiki/pages/vn/Smart-Card-Reader
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.3 Smart Card Reader''' [=#point3.5.3] ([wiki:Interface-Operation#point3.5 System (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/system-Smart_Card_Reader.jpg)]][[BR]]8 >9 here you can setup your smart card.10 11 [[br]]12 13 ----14 15 '''Coloured Button's Functions"16 17 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.18 please see below for more info on the functions of these buttons:.19 20 ||'''Red Button: (Reset)''' ||This will reset the selected Smart Card.|| -
wiki/pages/vn/Supported-Receivers
r37567 r37661 1 [[TranslatedPages]]2 3 ----4 '''7 Compatible Receivers''' [=#point7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0.2 Main page])5 ----6 7 Titan was originally releaced for SH4 based hardware from Atemio and Katherin, since the advent and popularity of TitanNit on the SH4 platform it has been releaced to the Mips platform also for instalation the latest Atemio recievers.8 9 The Atemio 5200 is the first reciever to include a mips based processor and will be the first officially supported reciever not of the SH4 chipset, and marks a new era for TitanNit.10 11 The current offerings of sh4 based recievers are a lot less powerfull than some of the mips devices out there, part of the reason why titan was developed for the SH4, with titan running on mips hardware we expect to see a very fast very capable feature packed system that we will all look forward to.12 13 Titan is also in development for the vu+ recievers and may be releaced in the future.14 15 TitanNit has also been made available for a variety of non-Atemio recievers manufactured by fortis, Atemio identical SH4 Fortis manufactured Receivers.16 17 18 === Currently, the following receivers are directly supported: ===19 20 21 '''SH4 Atemio''' ([http://www.atemio.de Atemio homepage])22 23 * Atemio 51024 * Atemio 52025 * Atemio 53026 * Atevio 70027 * Atevio 700028 * Atemio 760029 30 '''SH4 Fortis''' ([http://www.fortis.co.kr Fortis homepage])31 32 * [#point7.2 Fortis Clones hardware detection]33 * Fortis FS-900034 * Fortis FS-920035 * Fortis HS-951036 * Fortis HX-820037 * Fortis HS-781038 39 '''SH4 Homecast''' ([http://www.myhomecast.nl/ Homecast homepage])40 41 * Homecast Pro42 43 '''SH4 IPBox''' ([http://www.abipbox.com/ AB IPBox homepage])44 45 * Ipbox9146 * Ipbox90047 * Ipbox91048 * Ipbox900049 50 '''SH4 Katherin''' ([http://www.kathrein-gmbh.at kathrein homepage])51 52 * Kathrein UFS 91053 * Kathrein UFS 912 (license charges may apply)54 * Katherin UFS 922 (license charges may apply)55 * Katherin UFS 96056 57 '''SH4 Fulan/ Spark''' ([http://www.spark-tv.com Spark homepage)]58 59 * [#point7.6 Fulan Clones hardware detection]60 * Spark711161 * Spark716262 63 '''Mips Atemio''' ([http://www.atemio.de Atemio homepage])64 65 * Atemio 5000 (AKA Nemisis)66 * Atemio 520067 * Atemio 600068 * Atemio 610069 * Atemio 620070 71 '''Mips Beyonwiz''' ([Mips Beyonwiz Beyonwiz homepage])72 73 * Beyonwiz T474 75 '''Mips Golden Interstar''' ([http://www.golden-interstar.pl Golden Interstar homepage])76 77 * Xpeedlx178 * Xpeedlx279 * Xpeedlx380 81 '''Mips Miraclebox''' ([http://www.miraclebox.se/ Miraclebox homepage])82 83 * MBUltra84 * MBMini85 86 87 88 '''Mips Sezam'''([http://www.sezam-club.ru/ homepage])89 90 * Sezam-Marvel91 92 93 94 ----95 '''SH4 Fortis based clone receiver detection (hardware profile)''' [=#point7.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])96 ----97 98 This list will help you select the correct clone hardware model below is a specifications list check the back of your manual included with your receiver and look at the table below to select the correct hardware model.99 This list has not yet been confirmed and some of these models may be incompatible with TitanNit.100 101 If you have successfully installed TitanNit on your Receiver please inform an admin member so this list can be updated.102 103 Please Note:104 * Due to differences between the VFDisplay programming and the supplied Remote Control units delivered with your Receiver a remapping of the remote control Layout may be necessary.105 106 * Pre-Release Versions with the loader version 1.19 had problems when installing versions 1.21 and 1.54 and demand a replacement of the VF-Display in order for the Receiver to boot. Fault is an inbedded security feature. Therefor it is unknown if iboot will actually function with the Receivers. If you have one of these Receivers it would be advisable to take caution installing iboot.107 108 This table shows the last gen SH4 based receivers manufactured by fortis if you look in your manual of your reciever it will display the specifications and you may use the below table find out the base fortis model it is styled on to verify the compatibility with the corect Atemio/Atevio model.109 110 {{{#!div style="width: 1000px; margin: auto"111 ||'''Model System'''||'''Tuner'''||'''CPU'''||'''RAM'''||'''ROM (Flash)'''||'''USB'''||'''PVR Funktion'''||'''CardReader'''||'''Common interface'''||'''Width'''||'''Display'''||'''features'''||112 ||[#point7.3 Fortis FS-9000 HD PVR]||DVB-S/S2 2||STI_7101 266 Mhz||192MB||32MB||2||Internal 2.5 or 3.5 SATA, external via USB||1 (*2)||2||11-segment||43 cm|| ||113 ||[#point7.3 Fortis FS-9200 HD PVR]||DVB-S/S2 2||STI_7101 266 Mhz||192MB||32MB||2||eSATA & USB||1 (*2)||2||11-segment||34 cm|| ||114 ||[#point7.2 Fortis HS-9510]||DVB-S/S2 1||STI_7101 266 Mhz||192MB||32MB||1||USB||1 (*2)||2||11- segment||34 cm|| ||115 ||[#point7.4 Fortis HX-8200 HD PVR]||DVB-S/S2, DVB-T2, DVB-C 1/2||STI_7105 450 Mhz||256MB||64MB||3||Internal 2,5´´SATA-HDD external via eSATA + USB||2||2||11-segment||34 cm||Plug&Play Tuner, Youtube, Browser, FreeTV+||116 ||[#point7.5 Fortis HS-7810 HD PVR]||DVB-S/S2 1||STI_7110 450 Mhz||256MB||32MB||2||USB||1||2||4-segment||26 cm||YouTube, Browser, FreeTV+||117 }}}118 119 120 ----121 '''Atevio AV 700 HD simular hardware:''' [=#point7.2]122 ----123 Single tuner no no built in YouTube, Browser or FreeTV+124 125 Fortis base model HS-9510HD PVR and possibly identical boxes:126 127 * Fortis HS- 9510 HD PVR 20000300 Korea.128 * Rebox RE- 4000HD PVR 20010300 Netherlands.129 * Octagon SF- 1008 20020300 Germany.130 * Octagon SF -1008 SE 20020303 Germany.131 * HD Box FS- 9100HD 20030300 Czech Republic.132 * Ultra Plus HD 980 20050300 New Zealand.133 * Openbox S5 HD PVR 20060302 Ukraine.134 * Tiviar S1 eco HD PVR 20070300 U.S.A. Switzerland .135 * Astro ASR 1100 Single HD 20110300 and 20110303 Germany .136 * Dreamsky DSR- 9600HD PVR 20120302 Belarus.137 * Skyway Classic 20130302 Russia.138 * I.Com HD -9000 DIVX 20140300 Syria.139 * I.Com HD -9000 DIVX II 20140702 Syria.140 * I.Com HD -9100 DIVX II 20140602 Syria.141 * XSPEED HD -9500 DIVX II 20140612 Syria.142 * Optibox Koala HD 20150300 Hungary.143 * Xcruiser XDSR400HD 20160302 Dubai.144 * VisionNet FS- 9510 HD PVR 20170302 Israel.145 * Gold Master HD -1060 HD PVR HD PVR -1070 -1080 PVR 20180302 Turkey146 * Powersat PO - 1000HD PVR 20190301147 * Star Track SRT 2010 HD 20210302 Dubai148 * O2 SRT 2012 HD 20210301 Dubai149 * Forever HS- 9510HD PVR 20220302 Algeria150 * Dynavision DV -9500 HDPVR 20230302 Dubai151 * Dynavision DV -9600 HDPVR 20230301 Dubai152 * GI S- 8290 HD PVR 20240602 Romania153 * Miraclebox 8 HD TWIN PVR 20250600 Sweden154 * Diginor 8800 HD 20260600 Sweden155 * Media Star ( Powers) HD 1200s 20270600 Australia156 * MaxFly 9500 HD 20280602 Syria157 * SuperBox SX 9518 HD 20300302 Moldova158 * Elcomax Elux I 20310301 Iran159 160 [#point7 Top of Page]161 162 ----163 '''Atevio AV 7000 HD simular hardware:''' [=#point7.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])164 ----165 Fortis base model FS-9000 and FS-9200 differ due to option of including an internal harddisk.166 167 FS- 9000 HD PVR and possibly identical boxes"168 169 * Fortis FS- 9000HD 20000000 Korea170 * Rebox RE- 9000HD 20010000 Netherlands171 * Octagon SF 1018 20020000 Germany172 * HD Box FS -9300 HD 20030000 Czech Republic173 * Ultra Plus F- 9000HD 20050000 New Zealand ''' Confirmed by ''' ([http://www.aaf-digital.info/forum/member.php?24970-professor_jonny Professor_Jonny])174 175 * Openbox S8 HD PVR 20060000 Ukraine176 * Tiviar F1 HD PVR USA 20070000 Switzerland177 * Icecrypt S4000 HDPVR 20080000 England178 * Skyway Diamond 20130000 Russia179 * Dynavision DV -9000 HDPVR 200230000 Dubai180 181 FS- 9200 HD PVR and possibly identical boxes:182 183 * Fortis FS- 9200HD PVR 20000100 Korea184 * Rebox RE- 8000HD 20010100 Netherlands185 * HD Box FS- 9200HD 20030100 Czech Republic186 * Arcon Titan 2010HD 20040100 Germany187 * Openbox S7 HD PVR 20060100 Ukraine188 * Tiviar T1 HD PVR 20070100 Switzerland189 * Astro ASR 1200 Twin HD 20110100 Germany190 * Dreamsky DSR- 9700HD PVR 20120100 Belarus191 * Skyway Platinum 20130100 Russia192 * I.Com Twin HD -9200 DIVX 20140100 Syria193 * I.Com Twin HD -9200 DIVX II 20140101 Syria194 * Gold Master 1090 HD PVR 20180100 Turkey195 * Dynavision DV -9200 HDPVR 20230100 Dubai196 197 [#point7 Top of Page]198 199 ----200 '''Atevio/ Atemio AV 7500 7600 HD simular hardware:''' [=#point7.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])201 ----202 This model has a removable tuner and has YouTube, Browser, FreeTV+203 204 Fortis base model HX -8200 HD PVR and possibly identical boxes:205 206 * Fortis HX -8200 HD PVR 230000X0 Korea207 * Rebox RE -8500 HD PVR 230100X0 Netherlands208 * Octagon SF 1028P Noblence 230200X0 Germany209 * Skyway Droid 230400X0 Russia210 * Openbox S9 HD PVR 230500X0 Ukraine211 * Icecrypt STC6000HDPVR 230600X0 UK212 * Miraclebox 9 HD TWIN PVR 230700X0 Sweden213 * Xcruiser XDSR600HD 230900X0 Dubai214 * Ultra Plus X - 9200HD PVR 231200X0 New Zealand215 * Skys @ t Royal HD PVR 231500X0 Bulgaria216 * SuperBox PRO HD 9818 231600x0 Moldova217 * Optibox Raptor HD 231800X0 Hungary218 * Forever HD PVR 8200 231900X0 Algeria219 * Media Star ( Powers) HD 8200S 232700X0 Australia220 221 [#point7 Top of Page]222 223 ----224 '''Atemio AV 500/510 HD simular hardware:''' [=#point7.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])225 ----226 This model has a removable tuner and has YouTube, Browser, FreeTV+227 228 Fortis base model HS -7110 HD PVR and possibly identical boxes:229 230 * Fortis HS -7110 HD PVR ? korea231 * Optibox Gekko HD 250102X0 Hungary232 * Octagon SF 918 SE + 250202X0 Germany233 * Rebox RE -2200 HD PVR 250302X0 Netherlands234 * Skyway LIGHT 250502X0 Russia & Belarus235 * HD Box FS- 7110HD 250602X0 Czech Republic236 * Openbox S4 HD PVR 250902X0 Ukraine237 * Icom HD 1070P DIVX 251002X0 Syria238 * Gold Master HD -1040 HD PVR -1045 PVR 251102X0 Turkey239 * Dynavision DV -5000 HDPVR 251202X0 Dubai240 * GI S8580 251302X0 Romania241 * Xcruiser XDSR 380HD 251802X0 Dubai242 * Dreamsky HD4 252002X0 Belarus243 * ? Supermax 7100 252102X0 ?244 * Skys @ t Mini HD PVR 252202X0 Bulgaria245 * Icecrypt S3500 HDCCI 252502X0 UK246 * Miraclebox 6 HD TWIN PVR 252602X0 Sweden247 * Vegasat X1 252802X0 Morocco248 * Ultraplus 900 HD PVR ? New Zealand249 250 [[br]][#point7 Top of Page]251 252 ----253 '''Fulan based clone receiver detection (hardware profile)''' [=#point7.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])254 ----255 256 This list will help you select the correct clone hardware model below is a specifications list check the back of your manual included with your receiver and look at the table below to select the correct hardware model.257 This list has not yet been confirmed and some of these models may be incompatible with TitanNit.258 259 If you have successfully installed TitanNit on your Receiver please inform an admin member so this list can be updated.260 261 This table shows the last gen SH4 based receivers manufactured by Fulan if you look in your manual of your reciever it will display the specifications and you may use the below table find out the base Fulan model it is styled on to verify the compatibility with the Fulan model.262 263 {{{#!div style="width: 1000px; margin: auto"264 ||'''Model System'''||'''Tuner'''||'''CPU'''||'''RAM'''||'''ROM (Flash)'''||'''USB'''||'''PVR Funktion'''||'''CardReader'''||'''Common interface'''||'''Width'''||'''Display'''||'''features'''||265 ||[#point7.7 Fulan 7162]||DVB-S/S2 1,2,3||STI_7162 266 Mhz|| || || || || || || || || ||266 ||[#point7.8 Spark 7111]||DVB-S/S2 1||STI_7111 266 Mhz|| || || || || || || || || ||267 }}}268 269 270 271 ----272 '''Fulan/Spark 7162 simular hardware:''' [=#point7.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])273 ----274 This model has a STI 7162 Processor, tuner varies by reseller either one two or three tuners275 276 Fulan/Spark 7162 and possibly identical boxes:277 278 279 * Golden Media Spark Triplex 0C 00 07 00280 * Golden Media Spark One 0C 00 07 00281 * SAB Unix Triple HD 0C 00 0E 00282 * Amiko Alien 2 0C 00 0A 00283 * Galaxy Innovations Avatar 2 0C 00 0B 00284 * Galaxy Innovations Avatar 3 0C 00 0B 00285 * Visionnet Falcon 0C 00 21 00286 * Icecrypt S3700 CHD 0C 00 2B 00287 * Truman Top Box 2 Tuners 0C 00 03 00288 * Samsat Linux 2 0C 00 20 00289 * Satcom 7162 0C 00 1D 00290 * Dynavision 7162 0C 00 0D 00291 * Superbox Z500 0C 00 15 00292 * Delta 0C 00 04 00293 * Startrack SRT 2020 HD Plus 0C 00 05 00294 * Sogno Spark Triple 0C 00 43 00295 296 ----297 '''Fulan/Spark 7111 simular hardware:''' [=#point7.8]298 ----299 This model has a STI 7111 Processor, all models seem to have a single DVB-S2 tuner.300 301 Fulan/Spark 7111 and possibly identical boxes:302 303 * Amiko Alien SHD 8900, 09 00 0A 00304 * Golden Media 990 CR HD PVR Spark LX 09 00 07 00305 * Golden Media Spark Reloaded 09 00 07 00306 * Edision Argus Pingulux 09 00 08 00307 * Edision Argus Pingulux Plus 09 00 08 00308 * Galaxy Innovations GI S8120 09 00 0B 00309 * SAB Unix F+ Solo (S902) 09 00 0E 00310 * Dynavision Spark 09 00 0D 00311 * Dynavision Spark Plus 09 00 0D 00312 * Fulan Spark I+ 09 00 1D 00313 * Truman Premier 1+ 09 00 03 00314 * Samsat Linux 1 09 00 20 00315 * Startrack SRT 2020 HD 09 00 21 00316 * FullHD FH 2020 HD 09 00 ?? 00317 * Yumatu Spark 09 00 ?? 00318 * Visionnet Hammer 5400 09 00 21 00319 * Visionnet Fireball 101 09 00 21 00320 * Superbox S750 09 00 15 00321 * Sogno Spark Revolution 09 00 43 00322 323 -
wiki/pages/vn/Supported-Recievers
r37567 r37661 1 ----2 '''7 Compatable Revievers''' [=#point7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0.2 Main page])3 ----4 5 === Currently, the following receivers are supported: ===6 7 * Atemio 510/520/5308 * Atemio 76009 * Atevio 700/700010 * Kathrein UFS 91011 * Kathrein UFS 912/922 (license charges may apply)12 13 Recently TitanNit has been made available for a variety of non-Atemio Receivers. Identical SH4 Fortis Receivers may work with TitanNit.14 15 This list has not yet been confirmed and some of these models may be incompatible with TitanNit.16 17 If you have successfully installed TitanNit on your Receiver please inform an admin member so this list can be updated.18 19 Please Note:20 * Due to differences between the VFDisplay programming and the supplied Remote Control units delivered with your Receiver a remapping of the remote control Layout may be necessary.21 22 * Pre-Release Versions with the loader version 1.19 had problems when installing versions 1.21 and 1.54 and demand a replacement of the VF-Display in order for the Receiver to boot. Fault is an inbedded security feature. Therefor it is unknown if iboot will actually function with the Receivers. If you have one of these decoders it would be advisable to take caution installing iboot.23 24 25 === Atevio AV 500 HD: ===26 27 Model HS- 9510HD PVR and possibly identical boxes:28 29 * Fortis HS- 9510 HD PVR 20000300 Korea.30 * Rebox RE- 4000HD PVR 20010300 Netherlands.31 * Octagon SF- 1008 20020300 Germany.32 * Octagon SF -1008 SE 20020303 Germany.33 * HD Box FS- 9100HD 20030300 Czech Republic.34 * Ultra Plus HD 980 20050300 New Zealand.35 * Openbox S5 HD PVR 20060302 Ukraine.36 * Tiviar S1 eco HD PVR 20070300 U.S.A. Switzerland .37 * Astro ASR 1100 Single HD 20110300 and 20110303 Germany .38 * Dreamsky DSR- 9600HD PVR 20120302 Belarus.39 * Skyway Classic 20130302 Russia.40 * I.Com HD -9000 DIVX 20140300 Syria.41 * I.Com HD -9000 DIVX II 20140702 Syria.42 * I.Com HD -9100 DIVX II 20140602 Syria.43 * XSPEED HD -9500 DIVX II 20140612 Syria.44 * Optibox Koala HD 20150300 Hungary.45 * Xcruiser XDSR400HD 20160302 Dubai.46 * VisionNet FS- 9510 HD PVR 20170302 Israel.47 * Gold Master HD -1060 HD PVR HD PVR -1070 -1080 PVR 20180302 Turkey48 * Powersat PO - 1000HD PVR 2019030149 * Star Track SRT 2010 HD 20210302 Dubai50 * O2 SRT 2012 HD 20210301 Dubai51 * Forever HS- 9510HD PVR 20220302 Algeria52 * Dynavision DV -9500 HDPVR 20230302 Dubai53 * Dynavision DV -9600 HDPVR 20230301 Dubai54 * GI S- 8290 HD PVR 20240602 Romania55 * Miraclebox 8 HD TWIN PVR 20250600 Sweden56 * Diginor 8800 HD 20260600 Sweden57 * Media Star ( Powers) HD 1200s 20270600 Australia58 * MaxFly 9500 HD 20280602 Syria59 * SuperBox SX 9518 HD 20300302 Moldova60 * Elcomax Elux I 20310301 Iran61 62 [#point7 Top of Page]63 64 === Atevio AV 7000 HD: ===65 66 The models FS- 9000 and FS -9200 differ due to option of including an internal harddisk.67 68 FS- 9000 HD PVR and possibly identical boxes69 70 * Fortis FS- 9000HD 20000000 Korea71 * Rebox RE- 9000HD 20010000 Netherlands72 * Octagon SF 1018 20020000 Germany73 * HD Box FS -9300 HD 20030000 Czech Republic74 * Ultra Plus F- 9000HD 20050000 New Zealand ''' Confirmed by ''' ([http://www.aaf-digital.info/forum/member.php?24970-professor_jonny Professor_Jonny])75 76 * Openbox S8 HD PVR 20060000 Ukraine77 * Tiviar F1 HD PVR USA 20070000 Switzerland78 * Icecrypt S4000 HDPVR 20080000 England79 * Skyway Diamond 20130000 Russia80 * Dynavision DV -9000 HDPVR 200230000 Dubai81 82 FS- 9200 HD PVR and possibly identical boxes83 84 * Fortis FS- 9200HD PVR 20000100 Korea85 * Rebox RE- 8000HD 20010100 Netherlands86 * HD Box FS- 9200HD 20030100 Czech Republic87 * Arcon Titan 2010HD 20040100 Germany88 * Openbox S7 HD PVR 20060100 Ukraine89 * Tiviar T1 HD PVR 20070100 Switzerland90 * Astro ASR 1200 Twin HD 20110100 Germany91 * Dreamsky DSR- 9700HD PVR 20120100 Belarus92 * Skyway Platinum 20130100 Russia93 * I.Com Twin HD -9200 DIVX 20140100 Syria94 * I.Com Twin HD -9200 DIVX II 20140101 Syria95 * Gold Master 1090 HD PVR 20180100 Turkey96 * Dynavision DV -9200 HDPVR 20230100 Dubai97 98 [#point7 Top of Page]99 100 === Atevio / Atemio AV 7500/7600 HD: ===101 102 Model HX -8200 HD PVR and possibly identical boxes103 104 * Fortis HX -8200 HD PVR 230000X0 Korea105 * Rebox RE -8500 HD PVR 230100X0 Netherlands106 * Octagon SF 1028P Noblence 230200X0 Germany107 * Skyway Droid 230400X0 Russia108 * Openbox S9 HD PVR 230500X0 Ukraine109 * Icecrypt STC6000HDPVR 230600X0 UK110 * Miraclebox 9 HD TWIN PVR 230700X0 Sweden111 * Xcruiser XDSR600HD 230900X0 Dubai112 * Ultra Plus X - 9200HD PVR 231200X0 New Zealand113 * Skys @ t Royal HD PVR 231500X0 Bulgaria114 * SuperBox PRO HD 9818 231600x0 Moldova115 * Optibox Raptor HD 231800X0 Hungary116 * Forever HD PVR 8200 231900X0 Algeria117 * Media Star ( Powers) HD 8200S 232700X0 Australia118 119 [#point7 Top of Page]120 121 === Atemio AM 500/510 HD: ===122 123 Model HS -7110 HD PVR and possibly identical boxes124 125 * Optibox Gekko HD 250102X0 Hungary126 * Octagon SF 918 SE + 250202X0 Germany127 * Rebox RE -2200 HD PVR 250302X0 Netherlands128 * Skyway LIGHT 250502X0 Russia & Belarus129 * HD Box FS- 7110HD 250602X0 Czech Republic130 * Openbox S4 HD PVR 250902X0 Ukraine131 * Icom HD 1070P DIVX 251002X0 Syria132 * Gold Master HD -1040 HD PVR -1045 PVR 251102X0 Turkey133 * Dynavision DV -5000 HDPVR 251202X0 Dubai134 * GI S8580 251302X0 Romania135 * Xcruiser XDSR 380HD 251802X0 Dubai136 * Dreamsky HD4 252002X0 Belarus137 * ? Supermax 7100 252102X0 ?138 * Skys @ t Mini HD PVR 252202X0 Bulgaria139 * Icecrypt S3500 HDCCI 252502X0 UK140 * Miraclebox 6 HD TWIN PVR 252602X0 Sweden141 * Vegasat X1 252802X0 Morocco142 143 [[br]][#point7 Top of Page] -
wiki/pages/vn/System-Infos
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6 System Info''' [=#point3.7.8.6] ([wiki:System-Info#point3.7.8.6 System Infos (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/System-Info-System-Infos.jpg)]][[BR]]7 >8 > here you can view system wide information.9 10 [[br]]11 12 * ([wiki:CPU#point3.7.8.6.1 Cpu])13 * ([wiki:Memory#point3.7.8.6.2 Memory])14 * ([wiki:MTD#point3.7.8.6.3 MTD])15 * ([wiki:Module#point3.7.8.6.4 Module])16 * ([wiki:Devices#point3.7.8.6.5 Devices])17 * ([wiki:Swap#point3.7.8.6.6 Swap])18 * ([wiki:Top#point3.7.8.6.7 Top])19 * ([wiki:prozesslist#point3.7.8.6.8 prozesslist])20 * ([wiki:USB#point3.7.8.6.9 USB])21 22 [[br]]23 -
wiki/pages/vn/System-Status
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.1 System Status''' [=#point3.7.8.1] ([wiki:System-Info#point3.7.8 System Info (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/System-Status.jpg)]][[br]]7 >8 Here you can view the system status of the receiver.9 10 [[br]]11 12 13 [[br]] -
wiki/pages/vn/System-info-Network
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.4 Network''' [=#point3.7.8.4] ([wiki:System-Info#point3.7.8 System Info (Back)])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/System-info-Network.jpg)]][[br]]7 >8 Here you can view info on you network interface.9 10 [[br]]11 12 13 [[br]] -
wiki/pages/vn/TPK-Install
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.4.4 TPK Install (Online)''' [=#point3.4.4] ([wiki:Interface-Operation#point3.4 Extentions (Back)])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/extensions_TPK-Install(Online).jpg)]][[br]]7 >8 >here you can install plugins from from the online repo9 10 11 [[br]] -
wiki/pages/vn/TPK-Remove
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.4.7 TPK Remove''' [=#point3.4.7] ([wiki:Interface-Operation#point3.4 Extentions (Back)])4 >5 >6 >Menu Picture place holder:7 >8 >[[Image(source:/wiki/Wiki-Pictures/VN/TPK_Remove.jpg)]][[BR]]9 >10 >here you can remove your tpk plugins11 12 [[br]] -
wiki/pages/vn/TPK-Upgrade
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.4.3 TPK Upgrade''' [=#point3.4.3] ([wiki:Interface-Operation#point3.4 Extentions (Back)])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/DE/extensions_TPK-upgrade.jpg)]][[br]]7 >8 >here you can automatically upgrade your installed plugins from the online repo9 [[br]] -
wiki/pages/vn/Testpage
r37567 r37661 1 [[TranslatedPages]]2 3 4 Test code:5 6 7 [[CollapsibleStart]]8 9 nested text.10 11 [[CollapsibleEnd]]12 13 14 15 -
wiki/pages/vn/Time-to-sleep
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.5.4 Time to sleep''' [=#point3.5.5.4] ([wiki:Hard-Disk#point3.5.5 Hard Disk (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/Time-to-sleep.jpg)]][[br]]7 >8 Here you can configure your harddisk sleep settings.9 [[br]]10 11 12 13 14 [[BR]] -
wiki/pages/vn/Timeshift-Settings
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.6.7 Timeshift Settings''' [=#point3.6.7] ([wiki:Interface-Operation#point3.6 Settings (Back)])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Timeshift_Settings.jpg)]][[BR]]8 >9 10 Here you can edit your timeshift settings11 12 [[br]]13 14 ||'''Timeshift Type''' ||Select the operation mode of the timeshift function.||15 ||'''After Timshift:''' ||If timshift is stopped what function that should the reciever do.||16 ||'''Ask on channel switch:''' ||Ask what to do with the timeshift file on channel change.||17 ||'''Use Numeric Keys:''' ||use the numeric keys to control the timeshift skip and jump functions.||18 19 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.20 21 [[br]]22 ---- -
wiki/pages/vn/Timezone
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.6.3 Timezone''' [=#point3.6.3] ([wiki:Interface-Operation#point3.6 Settings (Back)])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Timezone.jpg)]][[BR]]8 >9 >here you can change your timezone.10 11 [[br]] -
wiki/pages/vn/Top
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6.7 Top''' [=#point3.7.8.6.7] ([wiki:System-Info#point3.7.8.6 System Infos (Back)])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Top.jpg)]][[br]]8 >9 Here you can view the detailed Process info.10 11 [[br]]12 13 14 [[br]] -
wiki/pages/vn/Translation
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''16 Translation''' [=#point16] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 7 '''The initial english section and Translation was provided By Professor_jonny'''8 9 You may contact me on the AAF forum if you have any suggestions or additions to add to the wiki:10 11 ([http://www.aaf-digital.info/forum/member.php?24970-professor_jonny Professor_Jonny]) -
wiki/pages/vn/Troubleshooting
r37567 r37661 1 [[TranslatedPages]]2 ----3 '''12 Troubleshooting ''' [=#point12] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 == Troubleshooting Contents ==7 8 This section explains how to formally submit a bug and provide debug logs so that this imformation is provided to the developers to action, it will explain how to use the trac ticket system to check and submit bugs for futher analisis.9 10 * Only a __registered__ Users__ can create __Tickets__. If you are not yet registered, you can register here __[http://sbnc.dyndns.tv/trac/register Register]__11 * The __User__ must be logged in, You can __[http://sbnc.dyndns.tv/trac/login Login]__ here12 * To achieve a faster and easier __trouble shooting__, we now offer the __Ticketsytem__. That way you can directly pinpoint your __error__ to the competent __Developer__. In the next steps we will explain the new __Ticketsystem__.[[Br]]13 * First, check the existing __ Tickets__ if the error has already been reported. This is done as follows. [[Br]]14 * Click the button __[http://sbnc.dyndns.tv/trac/report View Tickets]__ or go directly to __[http://sbnc.dyndns.tv/trac/report/1 Active Tickets]__.[[br]]15 * Click on __[http://sbnc.dyndns.tv/trac/search Search]__ and tick the __Tickets__ and begin the search.16 * Here you can see the current __active Tickets__, if the same error is listed, you can attach your error message to the __Ticket__.[[Br]]17 18 19 please select an item below for more information.20 21 * ([#point12.1 12.1 Bug Reporting])22 * ([#point12.2 12.2 Bug Update])23 * ([#point12.3 12.3 Bug Resolve])24 * ([#point12.4 12.4 Debuglevel])25 * ([#point12.5 12.5 Debug logging])26 [[br]]27 28 ----29 '''12.1 Report a new Error''' [=#point12.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])30 ----31 32 * You have discovered a new bug and it has not been reported so you want to create a new ticket[[br]]33 * Click the button __[http://sbnc.dyndns.tv/trac/newticket New Ticket]__[[br]]34 * The following fields __need__ to be filled in.[[Br]]35 * __Summary:__36 - This is the __displayed name__ of the reported error[[br]]37 * __Description:__38 - Copy the link from the __[http://www.aaf-digital.info/forum/forum.php AAF Board (Community)]__ where the posting was made.39 - If no posting excists in the __Community__ you can describe the error here.[[br]]40 * __Component:__41 - Set the critaria suiting the error so the appropriate __Developer__ is informed.[[br]]42 * __Responsible:__43 - Here the ticket can explicitly be assigned to a specific __Developer__.44 * The following fields can be __filled in__. [[Br]]45 * __Priority:__46 - Blocker - __very urgent__ the __ticket__ requires urgent attention.47 - Critical - __urgent__ other tickets or processes depend upon this error.48 - Major - __standard__ urgency (__default__).49 - Minor - __minor__ has a lot of time and __is not so important__.50 - trivial - __of no importance__ has even more time and __is least__ important.51 * __Milestone:__52 - Default is __standard__ if a more appropriate urgency is required it can be used.53 * __Tags__54 - This information is used by the __[http://sbnc.dyndns.tv/trac/search Search]__ - is usually not specified/required.55 * __Version:__56 - Is only applicable from version __2.0__57 * __Observer:__58 - Only a __Developer__ need to fill in this field if he wants to assign this ticket to a __User__, the user then sees it in __[http://sbnc.dyndns.tv/trac/report/7 My Tickets] __59 60 * To complete the ticket you click on the field __create Ticket__61 [[br]]62 [#point12 Top of Page]63 ----64 '''12.2 Bug Update''' [=#point12.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])65 ----66 67 * You have discovered a bug and it has been reported but you have aditional information that may be helpfull to the developers to repair the problem or have aditional comments on the problem[[br]]68 * Click the __[http://sbnc.dyndns.tv/trac/report Show Tickets]__ > __[http://sbnc.dyndns.tv/trac/report/1 Active Tickets]__ or __ [http://sbnc.dyndns.tv/trac/search Search]__ Button and __open__ the existing.[[br]]69 * The following fields __must__ be filled in.[[Br]]70 * __Add comment__:71 - Here you can add more details to the error description.[[br]]72 * To complete the ticket you click on __Submit changes__73 [[br]]74 [#point12 Top of Page]75 ----76 '''12.3 Bug Resolve (Report error as completed)''' [=#point12.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])77 ----78 79 80 * You have discovered a previously reported bug is now fixed and want to close the ticket to inform the dev the bug is now fixed.[[br]]81 * Click on __[http://sbnc.dyndns.tv/trac/report View Tickets]__ > __[http://sbnc.dyndns.tv/trac/report/1 Active Tickets]__ and open the respective ticket[[br]]82 * Scroll down to Action and set the field __resolve as__ to __fixed__83 * Click on the field _Submit changes__84 [[br]]85 [#point12 Top of Page]86 ----87 '''12.4 DebugLevel''' [=#point12.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])88 ----89 90 91 * In the Configuration file /mnt/config/titan.cfg you can set following debug levels92 * Minimal: 1093 * TopfieldVFD: 4094 * Media Center: 5095 * MenuList: 6096 * Network Browser: 7097 * Hard Disk: 8098 * Screensaver: 9099 * Tithek: 99100 * Global: 100101 * Ipkg: 130102 * Imdb/imdbapi/TMDB: 133103 * Eplayer: 150104 * Tuning: 200105 * Stream/Record/Softcam: 250106 * Radio text: 270107 * Subtitle: 300108 * EPG: 400109 * MediaDB: 777110 * Mutexes: 900111 * Function (in/out): 1000112 113 * The default debug level = 10114 [[br]]115 [#point12 Top of Page]116 ----117 '''12.5 Debug Logging''' [=#point12.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])118 ----119 120 Logging is a means of getting debug messages from the reciever for development and bug tracking purposes, this can be used to attach to a bug report or track ticked to assist the developer to find where a problem or bug may be traced from.121 122 123 * You have several options for logging124 * via Telnet:125 * A Network connection is assential126 * Client ([http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty]) configure the PC for Telnet session127 * Open the Telnet session to the receiver128 * killall -9 rcS titan129 * Set: ([#point112.4 DebugLevel=])130 * titan /mnt/config/titan.cfg > /tmp/titan.error.log 2>&1131 * To terminate logging press (ctrl+z)132 * Copy the log file (/tmp/titan.error.log) to your PC via ftp and send it as a ticket to the respective Developer133 * Via RS232 (serial connection)134 * A Serial connection must consist135 * Configure ([http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty]) on the PC for Serial136 * Open serial session to the receiver137 * Then send it as a ticket to the respective Developer138 139 * Using debug Images you can also query the kernel messages via a telnet session140 * Network connection must exist141 * Configure ([http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty]) on the PC for Serial142 * Open serial session to the receiver143 * cat/proc/kmsg > /tmp/titan.kernel.log 2>&1144 * To terminate logging press (ctrl+z)145 * Copy the log file (/tmp/titan.kernel.log) to your PC via ftp and send it as a ticket to the respective Developer146 [[br]]147 [#point12 Top of Page] -
wiki/pages/vn/USB
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6.9 Usb''' [=#point3.7.8.6.9] ([wiki:System-Info#point3.7.8.6 System Infos (Back)])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/USB.jpg)]][[br]]8 >9 Here you can view the detailed info on the ubb hosts and devices.10 11 [[br]]12 13 14 [[br]] -
wiki/pages/vn/USB-Device
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.18.3 USB Device''' [=#point3.5.18.3] ([wiki:Auto-Start-Settings#point3.5.18 Autostart Settings (Back)])4 >5 6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Autostart_Settings-USB_device.jpg)]][[br]]8 >9 Here you can check and adjust autostart settings for usb devices.10 11 [[br]]12 13 ||'''Load Partition:''' ||Auto load partitions from usb devices on startup.||14 ||'''NTFS write:''' ||Set the ntfs write option or driver.||15 ||'''Swap:''' ||enable swap file on usb device.||16 ||'''Swap Size:''' ||set the max size for the swap file on usb devices.||17 18 19 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes. -
wiki/pages/vn/VFDisplay
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.5.6 VFDisplay''' [=#point3.5.6] ([wiki:Interface-Operation#point3.5 System (Back)])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/system-VFDisplay.jpg)]][[BR]]7 >8 >Here you can edit the settings of the VFDisplay9 10 [[br]]11 12 13 ||'''Brightness''' || use the D-pad keys to adjust the brightness of the VFD.||14 ||'''Standby Brightness:''' || use the D-pad keys to adjust the brightness of the VFD.||15 ||'''Show in VFD:''' ||What to show in the VFDisplay when the system is running.||16 ||'''Show in Standby:''' ||What to show in the VFDisplay when the system is in standby.||17 ||'''Behavior at Recording:''' ||What to show in the VFDisplay when the system is recording.||18 ||'''LED Brightness Running''' || set the brightness of the led when the system is running.||19 ||'''LED Brightness Standby''' || set the brightness of the led when the system is in standby.||20 21 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.22 23 [[br]] -
wiki/pages/vn/Versions
r37567 r37661 1 [[TranslatedPages]]2 3 ----4 '''6 Versions''' [=#point6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])5 ----6 7 For the latest version of TitanNit please visit the [http://www.aaf-digital.info AAF-Board]8 9 '''USB Release History'''10 11 * Atevio7000 tiTan pre Alpha USB12 13 * ATevio7000 tiTan pre Alpha v1.2a USB14 15 ''Flash Release History''16 17 '''tiTan pre Alpha'''18 19 '''tiTan pre Alpha v1.2a'''20 21 Changelog Version 1.2A22 23 - Protect Channel Free Time function24 - Switches off after Pineingabe all channels for an adjustable time free25 - Virtual keyboard as input means for input boxes on help -/Text button26 - Fixes in Deep Standby / Record / Timeshift27 - TV / Radio on bluekey can be laid28 - Aktualisert station list29 - Minor fixes30 - Radio station list31 32 [[br]]33 34 ----35 '''Titan version 1.23'''36 ----37 38 39 Changelog Version 1.23 :40 41 - Kernel update on stm24 P21142 - TMDB / imdb / imdbapi fixed43 - Tithek youtube fix44 - Add mhw and MHW245 - One step OpenTV46 - One step dvb -t47 - Shut-off timer in the web48 - Display setting to in the Infobar of every consignment -49 - Fix newsletter on and off50 - Fix blind scan51 - Fix gmediarender pic view52 - Fix nas share as record mount53 - Load save video mode in mc54 - Fix autostart dlna55 - Fix eth0 = off56 - Fix manual imdb scan57 - Add info button to miniplayer58 - Add news category to tithek mainmenu59 - Add temp to sort miniplayer60 - Fix myvideo61 - Add short epg / press 0 in channel list62 - Fix MediaDB63 - Fix webif cable64 - Fix -> set cursor to next cammera65 - Update all skins66 - Wlan optimize67 - Fix patches for lcd support68 - Update Settings and Picons69 - Fix boot logo70 - Add start script before tv71 - Fix driver patch72 - Change adjust skin73 - Fix blinking clock74 - Fix formula auto volume change75 - Fix rectimer after event76 - Optimize tithek77 - Fix mute on channel switch78 79 [[br]]80 81 ----82 '''Titan Version 1.24'''83 ----84 85 86 - Changelog Version 1.2487 88 - New Channel List89 - Library continued to improve90 - EPG improved91 - Format ext392 - Hard drive detection improved ( File Check )93 - Improved search settings -94 - Added marker for recording -95 - Add resettv to begin of HbbTV start96 - Add facebook, gmediarender , call monitor , perl / samsung lcd, zapback picture97 - Add Atemio preview videos98 - Fix transponder99 - Change wlan driver100 - Add slow motion101 - Fix picons102 - Fix AddConfig vol103 - Fix jfs104 - Fix weather105 - Add -D cable swap Picons106 - Update almost all skins : fix choiceminitv , add usecec & change name ...107 - Fix play marker108 - Tithek add cache playback ( 10mb/180s )109 - Update picons white70 THX matze70110 - Update unitymedia cable THX Settings caliban111 - Add picon sat1 gold transparent112 - Add picons transparent Syfy HD and 13th HD113 - Update sat default settings114 - Tithek add new hoster115 - Use ext3 as default format hdd116 - Show different channel name in scan list117 - Add cec support / titanium not only the driver118 - Fix timer119 - Add DVB-T, Support THX gost120 - Fix blind scan settings121 - Update channel Ulyanov sat122 - Update channel sat default123 - Update matze70 default settings124 - Update Settings matze70 new design125 - Fix miniplayer126 - Update almost all skins : add cross control , emucontrol & MiniTV127 - Update titan_grey swapskin (old default)128 - Fix mute atevio7000129 - Default skin , remove hidden = yes; cross control , emucontrol & MiniTV130 - Update default skin , just some re - formatting131 - At7000 little led fix132 - Update almost all skins , at7000 led brightness133 - Fix ... stop if not used134 - At7000 at led brightness final135 - Update infobar enable vol + / - on rcleft / rcright enable ch + / - on ...136 - New weather icons137 - Add timote138 - Update all 0815 skins139 - Update tobayer01 skins , small fix in epgsearch , set fontcol2140 - Write config newsletter direct entry141 - Add timeout newsletter and save only if no timeout142 - Update cool & coolMiniTV swapskins143 - Next fix ac3 increase enlarge144 - Fix youtube145 - Fix rectimer after event146 - Fix for webif atevio700/7000147 - Update vpn148 - [ Vpn ] update tun.ko to P211149 - Update newsletter start / stop150 - Fix blinking clock151 152 [[br]]153 154 ----155 '''Titan Version 1.25'''156 ----157 158 159 - Changelog Version 1.25160 161 - Fixed problems when shooting and switching with multi-tuner162 - CI module recognition improved, inter alia, Fixed maxcam and Unicam problems163 - EPG Quick Facts added in the menu. Can also be used by pressing the " 0" are called in the station list.164 - Automatic backup (user data such as channel lists , network settings , etc. are automatically moved from the v1.25 in a personal folder and the online update again Made . )165 - Update the driver for the card reader166 - Bouquet / Favorites list change in the EPG view the << >> buttons167 - Automatic subtitle start ( below picture and sound settings adjustable)168 - Added Permanent Time-Shift function ( beta / trial version) OMay under Main Menu -> Settings -> TimeShift settings are activated.169 - WLAN optimized settings170 - Multimedia features further improved171 - Fixed problems playing and the forward and rewind recordings172 - Search for repetitions in the EPG view by pressing the "0" key added173 - Easy Sleep Timer: In addition to entering the numbers can also press the << >> buttons to set the time174 - Switch off after receiving end -shutdown on possible OIM Sleep Timer menu , press the " GREEN" for turning off " the mission end "175 - Message added the automatic shutdown (eg after an exposure) , in which one has the opportunity to stop the shutdown.176 - Direct retrieval of detailed information transmitter by pressing the Info button ( 2x)177 - Einstellbar under System Settings " Second Infobar "178 - Buffer size and resolution of Internet streams can be selected when retrieving a stream179 - Tuner can be disabled via the menu180 - Added · New menu item " Audio Delay " under picture and sound settings181 - SATA port for hard drive can now be selected in System Settings (SATA Connector = internal / external)182 - Programmed series can be stored in a separate folder now183 - press OIM Recording Timer menu "Create Directory " button "RED" for184 - Online Gallery / TiThek : adaptation of the menu view ( size of the images ) by pressing the menu button.185 - [AM 7600 ] New menu item " behavior in the Title" VFDisplay menu added (flashing , fade out / in , show record ... ) .186 - Update the icons / symbols in the Infobar , channel list and EPG view187 188 [[br]]189 190 ----191 '''Titan Version 1.30'''192 ----193 194 195 - Changelog Version 1.30196 197 - Update station list Astra 19.2 and 13.0 Hotbrid198 - Update library199 - Update (menu interface) Skins200 - New bootloader i -boot201 - Boot times AM 500/510 HD under 16 seconds202 - Boot times AM 7500/7600 HD PVR less than 20 seconds203 - Image output on the TV right after the turn of the device.204 - Various boat setting205 - Simplify installation of future firmware updates206 - Dual boot fit ( not yet active)207 - New: stations can be assigned to individual CI modules now208 - Main menu à System -> CI modules at Blue button (transmitter)209 - Support for various CI modules improved.210 - Improving the Wi-Fi settings211 - Added display HDD / capacity in timer overview and Media Player212 - Setting under : Main Menu à Settings à Skin Settings213 - Fixed menu display problems in 3D mode214 - EPG display improved (jumps with buttons 7 and 9 possible)215 - Improved time-shift and permanent time shift function216 - Sleep timer improves217 - Improved unicable Settings218 219 [[br]]220 221 ----222 '''Titan Version v1.32'''223 ----224 225 226 - Changelog Version 1.32227 228 - Atemio AM 500 HD (incl. new i-boot bootloader)229 - Atemio AM 510 HD (incl. new i-boot bootloader)230 - Atemio AM 7500 HD PVR (including new i-boot bootloader)231 - Atemio AM 7600 HD PVR (including new i-boot bootloader)232 - Atevio AV 700 HD233 - Atevio AV 7000 HD PVR234 - Atevio AV 7500 HD PVR (including new i-boot bootloader)235 236 - Update Channel List Astra 19.2 and 13.0 Hotbrid237 - Update station list Unity Media and Kabel BW238 - Update library239 - XXX streams / portals can be hidden in the library. (Menu button in the library press)240 - Problem with sorting in the FileList corrected and improved241 - Added Smart Card menu item242 - Improved file manager / file browser243 - Hard disk indicator improved244 - Repair function of var improves / mnt245 - Auto Timer improves246 - Errors in various TPK packages resolved.247 - Record timer added in the web interface.248 249 [[br]]250 251 ----252 '''Titan 1.45iboot'''253 ----254 255 256 - Changelog Version 1.32257 258 - New iboot bootloader259 * Memory management improved260 * Extended Flash memory to 11MB261 262 - Optimization of the channel search263 - New plug-in ( TPK package) e2webserv264 - Problem with subtitles resolved265 - 2x rcyellow add to player for subtitle266 - Support of 4TB hard drives267 - Update Video Player268 - Problem sorting the provider corrected269 - EPG search improves270 - Fixed problem with dlna271 - Problem with NSFB and Call Monitor resolved272 - Subtitle and EPG PID is stored in the recording273 - ARD library added274 - Update imdbfolder275 - Update the various menu languages276 - File Browser improves277 - Swap mount problem solved278 - Memory test before plugin installation added279 - Installation of TPK packages improved.280 - Installation FLASH (FLASH) : install in flash memory is deleted after a firmware update .281 - MNT installation ( FLASH) : installation in the flash, still present after firmware update.282 - SWAP installation (USB or HDD): Installing to USB / HDD , still present after image update .283 - Titan -plugin- keymaps -neutrino • Fixed problems with plug284 - Update all Skins285 - Media Player improves286 - improved CI module support287 - Update Web Interface288 - Added EPG Webtimer289 - Screenshot Auto Refresh290 - Fixed problem with recording button291 - Update the list of channels292 - unicable function ( single-cable ) improved293 - Problems with unicable receiving fixed294 - Permanent Time shift function improved. With the Play button can now be called up again the recording folder .295 - improved WLAN function296 - Added function to backup / restore settings297 - Update the screen saver298 - Support for ext4 -> storage media can be formatted now available in ext4 .299 - Plug-in ( TPK packets)300 - improved auto- timer plugin301 - channel lists revised302 - New plug Enigma2 WebIf API ( network) only .303 * Allows access to TitanNit by an E2 clients (eg dreaMote App on Iphone ) . After installing the program on a Atemio receiver with TitanNit it is possible by means of an E2 - clients to control the receiver to stream channels and recordings , and manage the timer. This works both with a corresponding app on iOS or on a PC (or Raspberry Pi ) with the XBMC software ( VU +).304 * We tested dreaMote Lite , dreaMote , e2RemoteHD and Dreambox Live on iOS , and with XBMC under Windows7 and Raspberry Pi305 - Zapback advertising Zapper PlugIn306 - Fixed problems with TPK packages "open VPN " and " gemediarender "307 308 [[br]]309 310 ----311 '''Titan 1.47iboot'''312 ----313 314 315 - Changelog Version 1.32316 317 - In the Media Center was "start at the last position" fixed.318 - The RC Recall function for the Atemio 520 was installed.319 - For remote controls, the RC-resolution and the RC mute on the Atevio700/7000 and Atemio 7600 all key bindings now work correctly.320 - The resolution function has been extended for Scart and YUV.321 - The recording of the screen shoot for the background image is taken after 10 min of recording, the recording is shorter then the first frame is taken.322 - The Screenshoot function in Media Center on the Record button fixed.323 - In the web interface at the Screenshoot now the video display plus the OSD will display.324 - In the Media Center automatic TMDB / imdb wallpapers search has been fixed.325 - The manual search in imdb has been fixed.326 - Satellite channel lists default and adjusted TPK updates.327 328 [[br]]329 330 ----331 '''Titan 1.49iboot'''332 ----333 334 335 - Changelog Version 1.47336 337 - Changed hard drives formatting338 - Revised Mount System339 - Cutting function of the recordings340 - Setting Updates341 - HBBTV removed, thus in the image more Ram342 - Library revised343 - Panel Functions in the Image Settings344 - Shifted Flash labels down345 - Installed Screenshoot with video -346 - Mediatheques local search built347 - Complete base image was updated348 - Vizcam, mod oscam and oscam away YMOD349 - Web browser favorites update350 - Fix mute button351 - Marker autoseek352 - Fix gbox config353 - Fixed TPK updates354 - Update the channel lists for TPK and default list355 - Adapted picons for new stations356 - Skins adapted for new functions in the menus357 358 [[br]]359 360 ----361 '''Titan 1.50iboot'''362 ----363 The following ticket fixed:364 365 - Internal Player - rewind does not work366 - General - When updating the 520 one also sees the 5200 updates367 - General - Web interface rc rc code image and adaptable boxes mipsel for both missing368 - Audio - ac3 sound <- in tv mode has no influence lautstärle leveler369 - LCD - Display AM 5000370 - Ci - ci modules371 - Media Center - Desktop Wallpaper Media Center missing372 - General - plug-ins and settings will be lost after each update373 - External player - volume leveler no effective374 - Gui - showiframe still does not work375 - Tuner - Second Tuner ( plug-in) will not appear in the 5200 / recognized376 - General - Press CH up / down reversed377 - component1 - xupnpd as a DLNA server378 - Skins - ... infobar closed from tobayer379 - Gui - hdd format it will not be displayed dateisyteme closed380 - TitanNit - no record in standby381 - System - NTFSwrite parameter resume in closed settings382 - General - The wysiwyg display at the wiki editing brings erroneous entries383 - General - Protection of minors has no effect384 - General - [ Am520 ] flashing display for remote control operation385 - General - shift caused by transmitters reboot the box386 - General - scripts before and after shooting387 - System - menu item will change color saturation color temperature388 - General - Recovery time ( recoverrun ) is not saved389 - TiThek - No thumbnails of each video in the TiThek390 - General - Review Dutch translation391 392 [[br]]393 394 ----395 '''Titan 1.53iboot'''396 ----397 The following ticket fixed:398 399 all400 - Revised channel lists401 - Reworked skins402 - LCD perl fixed403 - Fix oscam nightly404 - online Library extended (FilmOn TV)405 - Improved channel search406 - Picon adapted and added new channels407 - deleted the 320x240 Picon Samsung LCD, please the X-Light install transparent.408 409 mipsel410 - WLAN Fixed Atemio 5200411 - Allow for e2 Telnet and FTP Atemio 5200412 413 ----414 '''Titan 1.55iboot'''415 ----416 Changelog:417 418 - Added language files419 - Fixed Skins420 - Fixed Library (eg, rtl, RTL2, Super RTL, rtlnitro, ntv, vox, etc.) and added new hoster and inserted an improved search function421 - Improved web interface (added online and off line help)422 - Added IP boxes423 - Added Ufs913424 - Extended transponder and Settings425 - Add PIP and installed Oled Skins for Atemio Nemesis426 - EMU installation removed in Flash and configs extended -
wiki/pages/vn/Video-Player
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.2.2 Video Player''' [=#point3.2.2]([wiki:Interface-Operation#point3.2 Media Center (Back)])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/VN/Video_Player.jpg)]][[BR]]8 >9 >here you can play movies.10 11 12 13 [[br]]14 ----15 '''Coloured Button's Functions'''16 17 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.18 please see below for more info on the functions of these buttons:.19 20 ||'''Red Button: (Sorting)''' ||Set the sort method for the files listed in the file list display.||21 ||'''Green Button: (Filelist-Mode)''' ||Switch between filelist mode and playlist mode.||22 ||'''Yellow Button: (Random)''' ||select random play mode.||23 ||'''Blue Button: (Repeat)''' ||Select Repeat play mode.||24 ||'''Menu Button: (Menu)''' ||This will show an advanced settings menu for the media player see below for more info on the functions contained with in this menu.||25 26 ----27 '''Advanced Media Player Menu'''28 29 [[br]]30 31 videos:32 ||'''Sort:''' ||Set the sort method for the files listed in the file list display.||33 ||'''View:''' ||Switch between filelist mode and playlist mode.||34 ||'''MediaDB Autoscan:''' ||Auto scan MediaDb in Background.||35 ||'''Default Directory:''' ||Set the default directory to display when the media player opens.||36 ||'''Use Last Directory:''' ||open the last used directory when the media player opens.||37 ||'''Backdrop Interval:''' ||sets the change time of the background picture||38 39 '''Coloured Button's Functions'''40 41 42 ||'''Red Button: (Network)''' ||Set the sort method for the files listed in the file list display.||43 ||'''Green Button: (Edit)''' ||Switch between filelist mode and playlist mode.||44 45 ----46 -
wiki/pages/vn/Weather
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.2.7 Weather''' [=#point3.2.7] ([wiki:Interface-Operation#point3.2 Media Center (Back)])4 >5 >Menu Picture place holder:6 >7 >[[Image(http://sbnc.dyndns.tv/trac/export/26462/wiki/Wiki-Pictures/VN/weather.jpg)]][[br]]8 >9 >Weather is where you can view the weather around the world.10 [[br]]11 12 13 [[Image(http://sbnc.dyndns.tv/trac/export/26462/wiki/Wiki-Pictures/VN/weather_red_TEXT.jpg)]] -
wiki/pages/vn/Wiki
r37567 r37661 1 [[TranslatedPages]]2 {{{#!div align=center valign=top style="border: none; font-size: 300%"3 4 Welcome to the TitanNit Wiki5 }}}6 ----7 '''Noticeboard'''8 ----9 [[Image(source:/ipk/source/bootlogos_TitanNit_0_3/_path_/etc/boot/bootlogo.jpg, 240px, align=right,link=http://www.aaf-digital.info/forum/forum.php)]]10 {{{#!html11 <form action="//sbnc.dyndns.tv/trac/search?q" method="get">12 <input type="text" name="q" value="" size="30"/>13 <input type="submit" value="Search wiki"/>14 -->15 </form>16 }}}17 18 This is the TitanNit Online Manual. Its existence is based solely on the contributions of the members of the community.19 20 This manual remains incomplete, although it comes closer on a daily basis, as the TitanNit software is continually being developed and improved this site is repeatedly extended and adapted.21 22 There may be functionality that does not yet exist in this manual, so please feel free to pitch in and make any changes you see fit, that way as TitanNit evolves this manual will continue to evolve as well.23 24 If you are unsure if you should put some information in here or not, please feel free to contact us on [wiki:Contact#point15 Skype].25 Registered users may edit and create pages, and if you wish to access the wiki svn to upload pictures via TortiseSVN please contact us on [wiki:Contact#point15 Skype].26 27 For those of you who help us by contributing to this wiki might want to keep an eye on the [[http://www.aaf-digital.info/forum/forumdisplay.php?278-TitanNit | TitanNit]] section in the forum, and we may be able to provide you with some developer only beta tools and updates for use to test functions and take forth comming screen shots for the wiki and to test new features.28 29 Currently translations for other languages would be high on the list if you are able to help with translation's on the wiki go for it if you are able to help with gui translations please see [wiki:External-Software-TitanNitLanguageEditor#point9.6 TitanNitLanguageEditor] for information on creating and submitting these to the devs.30 31 This manual was created in order to help the users of TitanNit as a place to consolidate the information accrued over the years on the AAFforum and to tap in the flow of information from the developers.32 33 Please note that information on Emus, Illegal decryption of channels, card sharing and the like is not allowed, any information placed on this wiki is up for editing and modification by the community so don't get angry if it is removed or edited.34 35 NO copyrighted content is to be placed on this wiki if you are not the copyright holder of pictures or information placed on here or blatently copy works from other sources you may be banned from the wiki and or forum.36 37 ----38 '''Contents Section''' ([WikiStart#point0 Main page(language select)])39 [[br]]40 ----41 {{{#!div style="width: 1100px; margin: auto"42 {{{#!table style="border: none"43 {{{#!td align=center valign=top style="border: none; font-size: 115%"44 {{{#!div style="float: left"45 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Quick-Start-Guide.png,align=left,link=[wiki:Quick-Start-Guide#point0 Quick Start Guide])]]46 }}}47 '''[wiki:Quick-Start-Guide#point0 Quick Start Guide]'''[[br]]48 {{{#!div style="float: left49 This section contains the quick start guide where users can set up titanin a short precise way.50 }}}51 }}}52 {{{#!td align=center valign=top style="border: none; font-size: 115%"53 {{{#!div style="float: left"54 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History.png,align=left,link=[wiki:History#point1 TitanNit Info])]]55 }}}56 '''[wiki:History#point1 TitanNit Info]'''[[br]]57 {{{#!div style="float: left58 This section contains background information in reguards to TitanNit59 }}}60 }}}61 {{{#!td align=center valign=top style="border: none; font-size: 115%"62 {{{#!div style="float: left"63 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions.png,align=left,link=[wiki:Functions#point2 Interface Elements])]]64 }}}65 '''[wiki:Functions#point2 Interface Elements]'''[[br]]66 {{{#!div style="float: left67 This setion contains information on the interface of TitanNit68 }}}69 }}}70 |----71 {{{#!td align=center valign=top style="border: none; font-size: 115%"72 {{{#!div style="float: left"73 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Interface-Operation.png,align=left,link=[wiki:Interface-Operation#point3 Interface and Operation])]]74 }}}75 '''[wiki:Interface-Operation#point3 Interface and Operation]'''[[br]]76 {{{#!div style="float: left77 This section shows the interface and menu structure within TitanNit78 }}}79 }}}80 {{{#!td align=center valign=top style="border: none; font-size: 115%"81 {{{#!div style="float: left"82 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Remote-Device-Control.png,align=left,link=[wiki:Remote-Device-Control#point3.9 Remote/ Device Control contents])]]83 }}}84 '''[wiki:Remote-Device-Control#point3.9 Remote/ Device Control]'''[[br]]85 {{{#!div style="float: left86 This section contains information on the control of titan from the various remote interfaces87 }}}88 }}}89 {{{#!td align=center valign=top style="border: none; font-size: 115%"90 {{{#!div style="float: left"91 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Architecture-Programming.png,align=left,link=[wiki:Architecture-Programming#point4 Architecture and Programming])]]92 }}}93 '''[wiki:Architecture-Programming#point4 Architecture and Programming]'''[[br]]94 {{{#!div style="float: left95 This section contains information on the the various architecture and programming information regarding TitanNit96 }}}97 }}}98 |----99 {{{#!td align=center valign=top style="border: none; font-size: 115%"100 {{{#!div style="float: left"101 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Versions.png,align=left,link=[wiki:Versions#point6 Versions])]]102 }}}103 '''[wiki:Versions#point6 Versions]'''[[br]]104 {{{#!div style="float: left105 This section explains the different versions of TitanNit and their differences.106 }}}107 }}}108 {{{#!td align=center valign=top style="border: none; font-size: 115%"109 {{{#!div style="float: left"110 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Supported-Recievers.png,align=left,link=[wiki:Supported-Receivers#point7 Supported Receivers])]]111 }}}112 '''[wiki:Supported-Receivers#point7 Supported Receivers]'''[[br]]113 {{{#!div style="float: left114 This section details the supported receiver models in TitanNit.115 }}}116 }}}117 {{{#!td align=center valign=top style="border: none; font-size: 115%"118 {{{#!div style="float: left"119 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Installation-Recovery.png,align=left,link=[wiki:Installation-Recovery#point8 Installation / Recovery])]]120 }}}121 '''[wiki:Installation-Recovery#point8 Installation / Recovery]'''[[br]]122 {{{#!div style="float: left123 This section contains information on how to install and recover your titan installation.124 }}}125 }}}126 |----127 {{{#!td align=center valign=top style="border: none; font-size: 115%"128 {{{#!div style="float: left"129 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software.png,align=left,link=[wiki:External-Software#point9 External Software])]]130 }}}131 '''[wiki:External-Software#point9 External Software]'''[[br]]132 {{{#!div style="float: left133 This section explains external software for use with TitanNit.134 }}}135 }}}136 {{{#!td align=center valign=top style="border: none; font-size: 115%"137 {{{#!div style="float: left"138 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins.png,align=left,link=[wiki:Plugins-Contents#point10 Plugins])]]139 }}}140 '''[wiki:Plugins-Contents#point10 Plugin]'''[[br]]141 {{{#!div style="float: left142 This section will show you the various plugins available for titan and their source codes.143 }}}144 }}}145 {{{#!td align=center valign=top style="border: none; font-size: 115%"146 {{{#!div style="float: left"147 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Development.png,align=left,link=[wiki:Development#point11 Development])]]148 }}}149 '''[wiki:Development#point11 Development]'''[[br]]150 {{{#!div style="float: left151 This section details information on how to develop plugins for TitanNit.152 }}}153 }}}154 |----155 {{{#!td align=center valign=top style="border: none; font-size: 115%"156 {{{#!div style="float: left"157 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Troubleshooting.png,align=left,link=[wiki:Troubleshooting#point12 Troubleshooting])]]158 }}}159 '''[wiki:Troubleshooting#point12 Troubleshooting]'''[[br]]160 {{{#!div style="float: left161 This section explains using the trac bug system.162 }}}163 }}}164 {{{#!td align=center valign=top style="border: none; font-size: 115%"165 {{{#!div style="float: left"166 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Manufactures.png,align=left,link=[wiki:Manufactures#point13 Manufactures])]]167 }}}168 '''[wiki:Manufactures#point13 Manufacturers]'''[[br]]169 {{{#!div style="float: left170 This section will show you information about various manufacturers of TitanNit capable hardware.171 }}}172 }}}173 {{{#!td align=center valign=top style="border: none; font-size: 115%"174 {{{#!div style="float: left"175 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Community.png,align=left,link=[wiki:Community#point14 Community])]]176 }}}177 '''[wiki:Community#point14 Community]'''[[br]]178 {{{#!div style="float: left179 This section details information on how to get support for titan.180 }}}181 }}}182 |----183 {{{#!td align=center valign=top style="border: none; font-size: 115%"184 {{{#!div style="float: left"185 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Contact.png,align=left,link=[wiki:Contact#point15 Contact])]]186 }}}187 '''[wiki:Contact#point15 Contact]'''[[br]]188 {{{#!div style="float: left189 This section has info on how to contact the TitanNit Team.190 }}}191 }}}192 {{{#!td align=center valign=top style="border: none; font-size: 115%"193 {{{#!div style="float: left"194 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Translation.png,align=left,link=[wiki:Translation#point16 Translation])]]195 }}}196 '''[wiki:Translation#point16 Translation]'''[[br]]197 {{{#!div style="float: left198 This section is for wiki editors to place translation marks there.199 }}}200 }}}201 {{{#!td align=center valign=top style="border: none; font-size: 115%"202 {{{#!div style="float: left"203 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Disclaimer.png,align=left,link=[wiki:Disclaimer#point17 Disclaimer])]]204 }}}205 '''[wiki:Disclaimer#point17 Disclaimer]'''[[br]]206 {{{#!div style="float: left207 This section contains a legal disclaimer.208 }}}209 }}}210 |----211 {{{#!td align=center valign=top style="border: none; font-size: 115%"212 {{{#!div style="float: left"213 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Testpage.png,align=left,link=[wiki:Testpage#point17 Testpage])]]214 }}}215 '''[wiki:Testpage#point17 Testpage]'''[[br]]216 {{{#!div style="float: left217 This is a test page for testing wiki code218 }}}219 }}}220 221 }}}222 }}}223 ----224 '''Screenshots of the interface'''225 ----226 {{{#!div align=center valign=top style="border: none; font-size: 300%"227 [[Image(source:/wiki/Wiki-Pictures/VN/Mainmenu.jpg, 250px)]]228 [[Image(source:/wiki/Wiki-Pictures/VN/Recordsand_EPG.jpg, 250px)]]229 [[Image(source:/wiki/Wiki-Pictures/VN/Media_Center.jpg, 250px)]]230 [[Image(source:/wiki/Wiki-Pictures/VN/Media_player.jpg, 250px)]]231 [[Image(source:/wiki/Wiki-Pictures/VN/Extentions.jpg, 250px)]]232 [[Image(source:/wiki/Wiki-Pictures/VN/System.jpg, 250px)]]233 [[Image(source:/wiki/Wiki-Pictures/VN/Settings.jpg, 250px)]]234 [[Image(source:/wiki/Wiki-Pictures/VN/Information.jpg, 250px)]]235 [[Image(source:/wiki/Wiki-Pictures/VN/Standby_Poweroff.jpg, 250px)]]236 [[Image(source:/wiki/Wiki-Pictures/VN/Playback-OSD.jpg, 250px)]]237 [[Image(source:/wiki/Wiki-Pictures/VN/EPG-OSD.jpg, 250px)]]238 [[Image(source:/wiki/Wiki-Pictures/VN/Internal-Player-OSD.jpg, 250px)]]239 [[Image(source:/wiki/Wiki-Pictures/VN/Favourite-OSD.jpg, 250px)]]240 [[Image(source:/wiki/Wiki-Pictures/VN/Web_Control.jpg, 250px)]]241 [[br]]242 }}} -
wiki/pages/vn/prozesslist
r37567 r37661 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6.8 Prozesslist''' [=#point3.7.8.6.8] ([WikiStart#point3.7.8.6 System Infos (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/VN/prozesslist.jpg)]][[br]]7 >8 Here you can view the detailed Process info.9 10 [[br]]11 12 13 [[br]]
Note: See TracChangeset
for help on using the changeset viewer.