Ignore:
Timestamp:
09/27/16 00:33:12 (8 years ago)
Author:
aafsvn
Message:

[titan] autoupdate wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed

  • wiki/pages/nl/Installation-Recovery-SH4-IPBox

    r37662 r39056  
    1 [[TranslatedPages]]
    2 ----
    3 '''8.031 Ipbox''' [=#point8.030] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    4 ----
    5 
    6 Ipbox is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region.
    7 
    8 '''SH4 Ipbox Contents'''
    9 
    10  * [#point8.031 8.031 Ipbox91]
    11  * [#point8.032 8.032 Ipbox900]
    12  * [#point8.033 8.033 Ipbox910]
    13  * [#point8.034 8.034 Ipbox9000]
    14 
    15 '''Additional Info'''
    16 
    17  * [#point8.035 8.035 Uninstallation]
    18  * [#point8.036 8.036 Update TitanNit]
    19  * [#point8.037 8.037 IRD Download Location]
    20 
    21 ----
    22 '''8.031 Ipbox91''' [=#point8.031] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    23 ----
    24 '' How do I install an Ipbox 91 UPDATEUSB Image? ''
    25  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
    26  * Extract the zip file
    27  * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
    28      Note: The USB stick should not be formatted with windows. Use a separate program, such as the
    29      " HP USB Disk Storage Format Tool" (freeware program).
    30      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    31  * Turn off the Receiver and disconnect all USB devices.
    32  * Connect the USB stick with the IMG file to your Receiver
    33 * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
    34     then the installation starts. Only then release the button
    35      Note: If installation does not start, use a different USB stick.
    36  * The installation is finished when DONE appears on the receiver.
    37  * Restart the machine after by the main switch again to .
    38 [[br]]
    39 [#point8 Top of Page]
    40 [[br]]
    41 ----
    42 '''8.032 Ipbox900''' [=#point8.032] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    43 ----
    44 '' How do I install an Ipbox 900 UPDATEUSB Image? ''
    45  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
    46  * Extract the zip file
    47  * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
    48      Note: The USB stick should not be formatted with windows. Use a separate program, such as the
    49      " HP USB Disk Storage Format Tool" (freeware program).
    50      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    51  * Turn off the Receiver and disconnect all USB devices.
    52  * Connect the USB stick with the IMG file to your Receiver
    53 * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
    54     then the installation starts. Only then release the button
    55      Note: If installation does not start, use a different USB stick.
    56  * The installation is finished when DONE appears on the receiver.
    57  * Restart the machine after by the main switch again to .
    58 [[br]]
    59 [#point8 Top of Page]
    60 [[br]]
    61 ----
    62 '''8.033 Ipbox910''' [=#point8.033] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    63 ----
    64 '' How do I install an Ipbox 910 UPDATEUSB Image? ''
    65  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
    66  * Extract the zip file
    67  * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
    68      Note: The USB stick should not be formatted with windows. Use a separate program, such as the
    69      " HP USB Disk Storage Format Tool" (freeware program).
    70      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    71  * Turn off the Receiver and disconnect all USB devices.
    72  * Connect the USB stick with the IMG file to your Receiver
    73 * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
    74     then the installation starts. Only then release the button
    75      Note: If installation does not start, use a different USB stick.
    76  * The installation is finished when DONE appears on the receiver.
    77  * Restart the machine after by the main switch again to .
    78 [[br]]
    79 [#point8 Top of Page]
    80 [[br]]
    81 ----
    82 '''8.034 Ipbox9000''' [=#point8.034] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    83 ----
    84 '' How do I install an Ipbox 9000 UPDATEUSB Image? ''
    85  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
    86  * Extract the zip file
    87  * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
    88      Note: The USB stick should not be formatted with windows. Use a separate program, such as the
    89      " HP USB Disk Storage Format Tool" (freeware program).
    90      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    91  * Turn off the Receiver and disconnect all USB devices.
    92  * Connect the USB stick with the IMG file to your Receiver
    93 * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
    94     then the installation starts. Only then release the button
    95      Note: If installation does not start, use a different USB stick.
    96  * The installation is finished when DONE appears on the receiver.
    97  * Restart the machine after by the main switch again to .
    98 [[br]]
    99 [#point8 Top of Page]
    100 [[br]]
    101 
    102 ----
    103 '''8.035 Uninstalling Titan''' [=#point8.035] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    104 ----
    105 If you have an Ipbox receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
    106 
    107 [[br]]
    108 [#point8 Top of Page]
    109 [[br]]
    110 
    111 ----   
    112 '''8.036 Update TitanNit''' [=#point8.036] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
    113 ----
    114 There are two ways to update your TitanNit version and there are merits to both methods :
    115 
    116 IRD offline method see [#point8 Installation / Recovery] and select your Reciever model to show information on how to update titan using an IRD titannit image.
    117 [[br]]
    118 ''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
    119 Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
    120 
    121 Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
    122 [[br]]
    123 ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
    124 [[br]]
    125 [#point8 Top of Page]
    126 [[br]]
    127 
    128 ----   
    129 '''8.037 IRD Download Locations''' [=#point8.037] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
    130 ----
    131 
    132 * [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
    133  
    134 [[br]] 
    135 [#point8 Top of Page] 
    136 [[br]]
Note: See TracChangeset for help on using the changeset viewer.