Changeset 39063 for wiki/pages

wiki/pages/it/Settings-Backup-Restore

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.9 Settings Backup Restore''' [=#point3.5.9] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/system_Settings_Backup_Restore.jpg)]][[BR]]
+>
+> here you can backup and restore your settings.
+[[br]]
+To Exit from the menu press __"Exit"__ to cancel backup restore.
+'''Coloured Button's Functions"
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the backup restore menu. [[BR]]
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Restore)''' ||Press this button to preform a restore from your previously saved settings.||
+ ||'''Green Button: (Backup)''' ||Press this button to save your settings.||
+ ||'''Yellow Button: (Log)''' ||Press this button to see the backup restore log.||

wiki/pages/it/Single-EPG

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.1.2 Single EPG''' [=#point3.1.2] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Single_EPG.jpg)]][[BR]]
+>
+Single EPG is a small easy to read vertical epg of a single channel that shows the information of the currently selected program.
+[[br]]
+ '''Coloured and Extra Button's Functions"
+ The __"Coloured and Extra Buttons"__ along the bottom of the display bring up additional menus and options with in the Single EPG menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Timer)''' ||This will bring up the recording timer menu to set up a timer.||
+ ||'''0 key (EPG Search):''' ||This will search the EPG for text you specify and bring up a list of matches where you may press the red button to set up a timer.||
+For information on setting up a timer Recording using the red button see ([wiki:Records Records]) for more info.
+For information on setting proforming an EPG search using the 0 Key see ([wiki:EPG-Search#point103.10.5 EPG Search]) for more info.

wiki/pages/it/Skin

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.6.16 Skin''' [=#point3.6.16] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Skin.jpg)]][[BR]]
+>
+>here you can select your skin
+[[br]]

wiki/pages/it/Skin-Adjust

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.6.7 Skin Adjust''' [=#point3.6.7] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Skin_Adjust.jpg)]][[BR]]
+>
+>Here you can edit your skin display settings
+[[br]]
+ ||'''Font Zize Adjust in Pixel''' ||Adjust the size of the fonts in the GUI.||
+ ||'''Listbox Select:''' ||Select the display mode of the listbox select bar.||
+ ||'''OSD Transparancy:''' ||Set the transpancy of the OSD when it is overlaying the TV display.||
+ ||'''OSD Left Overscan:''' ||Set the value of the OSD overscan on the left edge of the display.||
+ ||'''OSD Right Overscan:''' ||Set the value of the OSD overscan on the right edge of the display.||
+ ||'''OSD Top Overscan:''' ||Set the value of the OSD overscan on the top edge of the display.||
+ ||'''OSD Bottom Overscan:''' ||Set the value of the OSD overscan on the bottom edge of the display.||
+ ||'''Show Hdd Freespace:''' ||show the Hdd Free space in the OSD. ||
+ ||'''Listbox Select Colour:''' ||Press the red button to bring up a colour selection to display for the listbox select bar. ||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]
+----

wiki/pages/it/Smart-Card-Reader

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.3 Smart Card Reader''' [=#point3.5.3] ([wiki:Interface-Operation#point3.5 System (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/system-Smart_Card_Reader.jpg)]][[BR]]
+>
+here you can setup your smart card.
+[[br]]
+----
+ '''Coloured Button's Functions"
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Reset)''' ||This will reset the selected Smart Card.||

wiki/pages/it/Streaming

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.4 Streaming''' [=#point3.7.4] ([wiki:Interface-Operation#point3.7 Information (Back)])([wiki:Wiki#point0.2 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Streaming.jpg)]][[BR]]
+>
+> here you can view information on service info being streamed to another device.
+[[br]]

wiki/pages/it/Supported-Receivers

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''7 Compatible Receivers''' [=#point7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0.2 Main page])
+----
+Titan was originally releaced for SH4 based hardware from Atemio and Katherin, since the advent and popularity of TitanNit on the SH4 platform it has been releaced to the Mips platform also for instalation the latest Atemio recievers.
+The Atemio 5200 is the first reciever to include a mips based processor and will be the first officially supported reciever not of the SH4 chipset, and marks a new era for TitanNit.
+The current offerings of sh4 based recievers are a lot less powerfull than some of the mips devices out there, part of the reason why titan was developed for the SH4, with titan running on mips hardware we expect to see a very fast very capable feature packed system that we will all look forward to.
+Titan is also in development for the vu+ recievers and may be releaced in the future.
+TitanNit has also been made available for a variety of non-Atemio recievers manufactured by fortis, Atemio identical SH4 Fortis manufactured Receivers.
+=== Currently, the following receivers are directly supported: ===
+'''SH4 Atemio'''    ([http://www.atemio.de Atemio homepage])
+ * Atemio 510
+ * Atemio 520
+ * Atemio 530
+ * Atevio 700
+ * Atevio 7000
+ * Atemio 7600
+'''SH4 Fortis'''  ([http://www.fortis.co.kr Fortis homepage])
+ * [#point7.2 Fortis Clones hardware detection]
+ * Fortis FS-9000
+ * Fortis FS-9200
+ * Fortis HS-9510
+ * Fortis HX-8200
+ * Fortis HS-7810
+'''SH4 Homecast'''    ([http://www.myhomecast.nl/ Homecast homepage])
+ * Homecast Pro
+ '''SH4 IPBox''' ([http://www.abipbox.com/ AB IPBox homepage])
+ * Ipbox91
+ * Ipbox900
+ * Ipbox910
+ * Ipbox9000
+'''SH4 Katherin'''   ([http://www.kathrein-gmbh.at kathrein homepage])
+ * Kathrein UFS 910
+ * Kathrein UFS 912 (license charges may apply)
+ * Katherin UFS 922 (license charges may apply)
+ * Katherin UFS 960
+'''SH4 Fulan/ Spark'''   ([http://www.spark-tv.com Spark homepage)]
+ * [#point7.6 Fulan Clones hardware detection]
+ * Spark7111
+ * Spark7162
+'''Mips Atemio'''   ([http://www.atemio.de Atemio homepage])
+ * Atemio 5000 (AKA Nemisis)
+ * Atemio 5200
+ * Atemio 6000
+ * Atemio 6100
+ * Atemio 6200
+'''Mips Beyonwiz'''   ([Mips Beyonwiz Beyonwiz homepage])
+ * Beyonwiz T4
+'''Mips Golden Interstar'''   ([http://www.golden-interstar.pl Golden Interstar homepage])
+ * Xpeedlx1
+ * Xpeedlx2
+ * Xpeedlx3
+'''Mips Miraclebox'''   ([http://www.miraclebox.se/ Miraclebox homepage])
+ * MBUltra
+ * MBMini
+'''Mips Sezam'''([http://www.sezam-club.ru/ homepage])
+ * Sezam-Marvel
+----
+'''SH4 Fortis based clone receiver detection (hardware profile)''' [=#point7.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+This list will help you select the correct clone hardware model below is a specifications list check the back of your manual included with your receiver and look at the table below to select the correct hardware model.
+This list has not yet been confirmed and some of these models may be incompatible with TitanNit.
+If you have successfully installed TitanNit on your Receiver please inform an admin member so this list can be updated.
+Please Note:
+  * Due to differences between the VFDisplay programming and the supplied Remote Control units delivered with your Receiver a remapping of the remote control Layout may be necessary.
+  * Pre-Release Versions with the loader version 1.19 had problems when installing versions 1.21 and 1.54 and demand a replacement of the VF-Display in order for the Receiver to boot. Fault is an inbedded security feature. Therefor it is unknown if iboot will actually function with the Receivers. If you have one of these Receivers it would be advisable to take caution installing iboot.
+This table shows the last gen SH4 based receivers manufactured by fortis if you look in your manual of your reciever it will display the specifications and you may use the below table find out the base fortis model it is styled on to verify the compatibility with the corect Atemio/Atevio model.
+{{{#!div style="width: 1000px; margin: auto"
+||'''Model System'''||'''Tuner'''||'''CPU'''||'''RAM'''||'''ROM (Flash)'''||'''USB'''||'''PVR Funktion'''||'''CardReader'''||'''Common interface'''||'''Width'''||'''Display'''||'''features'''||
+||[#point7.3 Fortis FS-9000 HD PVR]||DVB-S/S2 2||STI_7101 266 Mhz||192MB||32MB||2||Internal 2.5 or 3.5 SATA, external via USB||1 (*2)||2||11-segment||43 cm|| ||
+||[#point7.3 Fortis FS-9200 HD PVR]||DVB-S/S2 2||STI_7101 266 Mhz||192MB||32MB||2||eSATA & USB||1 (*2)||2||11-segment||34 cm|| ||
+||[#point7.2 Fortis HS-9510]||DVB-S/S2 1||STI_7101 266 Mhz||192MB||32MB||1||USB||1 (*2)||2||11- segment||34 cm|| ||
+||[#point7.4 Fortis HX-8200 HD PVR]||DVB-S/S2, DVB-T2, DVB-C 1/2||STI_7105 450 Mhz||256MB||64MB||3||Internal 2,5´´SATA-HDD external via eSATA + USB||2||2||11-segment||34 cm||Plug&Play Tuner, Youtube, Browser, FreeTV+||
+||[#point7.5 Fortis HS-7810 HD PVR]||DVB-S/S2 1||STI_7110 450 Mhz||256MB||32MB||2||USB||1||2||4-segment||26 cm||YouTube, Browser, FreeTV+||
+}}}
+----
+'''Atevio AV 700 HD simular hardware:''' [=#point7.2]
+----
+Single tuner no no built in YouTube, Browser or FreeTV+
+Fortis base model HS-9510HD PVR and possibly identical boxes:
+  * Fortis HS- 9510 HD PVR 20000300 Korea.
+  * Rebox RE- 4000HD PVR 20010300 Netherlands.
+  * Octagon SF- 1008 20020300 Germany.
+  * Octagon SF -1008 SE 20020303 Germany.
+  * HD Box FS- 9100HD 20030300 Czech Republic.
+  * Ultra Plus HD 980 20050300 New Zealand.
+  * Openbox S5 HD PVR 20060302 Ukraine.
+  * Tiviar S1 eco HD PVR 20070300 U.S.A. Switzerland .
+  * Astro ASR 1100 Single HD 20110300 and 20110303 Germany .
+  * Dreamsky DSR- 9600HD PVR 20120302 Belarus.
+  * Skyway Classic 20130302 Russia.
+  * I.Com HD -9000 DIVX 20140300 Syria.
+  * I.Com HD -9000 DIVX II 20140702 Syria.
+  * I.Com HD -9100 DIVX II 20140602 Syria.
+  * XSPEED HD -9500 DIVX II 20140612 Syria.
+  * Optibox Koala HD 20150300 Hungary.
+  * Xcruiser XDSR400HD 20160302 Dubai.
+  * VisionNet FS- 9510 HD PVR 20170302 Israel.
+  * Gold Master HD -1060 HD PVR HD PVR -1070 -1080 PVR 20180302 Turkey
+  * Powersat PO - 1000HD PVR 20190301
+  * Star Track SRT 2010 HD 20210302 Dubai
+  * O2 SRT 2012 HD 20210301 Dubai
+  * Forever HS- 9510HD PVR 20220302 Algeria
+  * Dynavision DV -9500 HDPVR 20230302 Dubai
+  * Dynavision DV -9600 HDPVR 20230301 Dubai
+  * GI S- 8290 HD PVR 20240602 Romania
+  * Miraclebox 8 HD TWIN PVR 20250600 Sweden
+  * Diginor 8800 HD 20260600 Sweden
+  * Media Star ( Powers) HD 1200s 20270600 Australia
+  * MaxFly 9500 HD 20280602 Syria
+  * SuperBox SX 9518 HD 20300302 Moldova
+  * Elcomax Elux I 20310301 Iran
+[#point7 Top of Page]
+----
+'''Atevio AV 7000 HD simular hardware:''' [=#point7.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+Fortis base model FS-9000 and FS-9200 differ due to option of including an internal harddisk.
+FS- 9000 HD PVR and possibly identical boxes"
+  * Fortis FS- 9000HD 20000000 Korea
+  * Rebox RE- 9000HD 20010000 Netherlands
+  * Octagon SF 1018 20020000 Germany
+  * HD Box FS -9300 HD 20030000 Czech Republic
+  * Ultra Plus F- 9000HD 20050000 New Zealand        ''' Confirmed by ''' ([http://www.aaf-digital.info/forum/member.php?24970-professor_jonny Professor_Jonny])
+  * Openbox S8 HD PVR 20060000 Ukraine
+  * Tiviar F1 HD PVR USA 20070000 Switzerland
+  * Icecrypt S4000 HDPVR 20080000 England
+  * Skyway Diamond 20130000 Russia
+  * Dynavision DV -9000 HDPVR 200230000 Dubai
+FS- 9200 HD PVR and possibly identical boxes:
+  * Fortis FS- 9200HD PVR 20000100 Korea
+  * Rebox RE- 8000HD 20010100 Netherlands
+  * HD Box FS- 9200HD 20030100 Czech Republic
+  * Arcon Titan 2010HD 20040100 Germany
+  * Openbox S7 HD PVR 20060100 Ukraine
+  * Tiviar T1 HD PVR 20070100 Switzerland
+  * Astro ASR 1200 Twin HD 20110100 Germany
+  * Dreamsky DSR- 9700HD PVR 20120100 Belarus
+  * Skyway Platinum 20130100 Russia
+  * I.Com Twin HD -9200 DIVX 20140100 Syria
+  * I.Com Twin HD -9200 DIVX II 20140101 Syria
+  * Gold Master 1090 HD PVR 20180100 Turkey
+  * Dynavision DV -9200 HDPVR 20230100 Dubai
+[#point7 Top of Page]
+----
+'''Atevio/ Atemio AV 7500 7600 HD simular hardware:''' [=#point7.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+This model has a removable tuner and has YouTube, Browser, FreeTV+
+Fortis base model HX -8200 HD PVR and possibly identical boxes:
+  * Fortis HX -8200 HD PVR 230000X0 Korea
+  * Rebox RE -8500 HD PVR 230100X0 Netherlands
+  * Octagon SF 1028P Noblence 230200X0 Germany
+  * Skyway Droid 230400X0 Russia
+  * Openbox S9 HD PVR 230500X0 Ukraine
+  * Icecrypt STC6000HDPVR 230600X0 UK
+  * Miraclebox 9 HD TWIN PVR 230700X0 Sweden
+  * Xcruiser XDSR600HD 230900X0 Dubai
+  * Ultra Plus X - 9200HD PVR 231200X0 New Zealand
+  * Skys @ t Royal HD PVR 231500X0 Bulgaria
+  * SuperBox PRO HD 9818 231600x0 Moldova
+  * Optibox Raptor HD 231800X0 Hungary
+  * Forever HD PVR 8200 231900X0 Algeria
+  * Media Star ( Powers) HD 8200S 232700X0 Australia
+[#point7 Top of Page]
+----
+'''Atemio AV 500/510 HD simular hardware:''' [=#point7.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+This model has a removable tuner and has YouTube, Browser, FreeTV+
+Fortis base model HS -7110 HD PVR and possibly identical boxes:
+  * Fortis HS -7110 HD PVR ? korea
+  * Optibox Gekko HD 250102X0 Hungary
+  * Octagon SF 918 SE + 250202X0 Germany
+  * Rebox RE -2200 HD PVR 250302X0 Netherlands
+  * Skyway LIGHT 250502X0 Russia & Belarus
+  * HD Box FS- 7110HD 250602X0 Czech Republic
+  * Openbox S4 HD PVR 250902X0 Ukraine
+  * Icom HD 1070P DIVX 251002X0 Syria
+  * Gold Master HD -1040 HD PVR -1045 PVR 251102X0 Turkey
+  * Dynavision DV -5000 HDPVR 251202X0 Dubai
+  * GI S8580 251302X0 Romania
+  * Xcruiser XDSR 380HD 251802X0 Dubai
+  * Dreamsky HD4 252002X0 Belarus
+  * ? Supermax 7100 252102X0 ?
+  * Skys @ t Mini HD PVR 252202X0 Bulgaria
+  * Icecrypt S3500 HDCCI 252502X0 UK
+  * Miraclebox 6 HD TWIN PVR 252602X0 Sweden
+  * Vegasat X1 252802X0 Morocco
+  * Ultraplus 900 HD PVR ? New Zealand
+[[br]][#point7 Top of Page]
+----
+'''Fulan based clone receiver detection (hardware profile)''' [=#point7.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+This list will help you select the correct clone hardware model below is a specifications list check the back of your manual included with your receiver and look at the table below to select the correct hardware model.
+This list has not yet been confirmed and some of these models may be incompatible with TitanNit.
+If you have successfully installed TitanNit on your Receiver please inform an admin member so this list can be updated.
+This table shows the last gen SH4 based receivers manufactured by Fulan if you look in your manual of your reciever it will display the specifications and you may use the below table find out the base Fulan model it is styled on to verify the compatibility with the Fulan model.
+{{{#!div style="width: 1000px; margin: auto"
+||'''Model System'''||'''Tuner'''||'''CPU'''||'''RAM'''||'''ROM (Flash)'''||'''USB'''||'''PVR Funktion'''||'''CardReader'''||'''Common interface'''||'''Width'''||'''Display'''||'''features'''||
+||[#point7.7 Fulan 7162]||DVB-S/S2 1,2,3||STI_7162 266 Mhz|| || || || || || || || || ||
+||[#point7.8 Spark 7111]||DVB-S/S2 1||STI_7111 266 Mhz|| || || || || || || || || ||
+}}}
+----
+'''Fulan/Spark 7162 simular hardware:''' [=#point7.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+This model has a STI 7162 Processor, tuner varies by reseller either one two or three tuners
+Fulan/Spark 7162 and possibly identical boxes:
+ * Golden Media Spark Triplex 0C 00 07 00
+ * Golden Media Spark One 0C 00 07 00
+ * SAB Unix Triple HD 0C 00 0E 00
+ * Amiko Alien 2 0C 00 0A 00
+ * Galaxy Innovations Avatar 2 0C 00 0B 00
+ * Galaxy Innovations Avatar 3 0C 00 0B 00
+ * Visionnet Falcon 0C 00 21 00
+ * Icecrypt S3700 CHD 0C 00 2B 00
+ * Truman Top Box 2 Tuners 0C 00 03 00
+ * Samsat Linux 2 0C 00 20 00
+ * Satcom 7162 0C 00 1D 00
+ * Dynavision 7162 0C 00 0D 00
+ * Superbox Z500 0C 00 15 00
+ * Delta 0C 00 04 00
+ * Startrack SRT 2020 HD Plus 0C 00 05 00
+ * Sogno Spark Triple 0C 00 43 00
+----
+'''Fulan/Spark 7111 simular hardware:'''   [=#point7.8]
+----
+This model has a STI 7111 Processor, all models seem to have a single DVB-S2 tuner.
+Fulan/Spark 7111 and possibly identical boxes:
+ * Amiko Alien SHD 8900, 09 00 0A 00
+ * Golden Media 990 CR HD PVR Spark LX 09 00 07 00
+ * Golden Media Spark Reloaded 09 00 07 00
+ * Edision Argus Pingulux 09 00 08 00
+ * Edision Argus Pingulux Plus 09 00 08 00
+ * Galaxy Innovations GI S8120 09 00 0B 00
+ * SAB Unix F+ Solo (S902) 09 00 0E 00
+ * Dynavision Spark 09 00 0D 00
+ * Dynavision Spark Plus 09 00 0D 00
+ * Fulan Spark I+ 09 00 1D 00
+ * Truman Premier 1+ 09 00 03 00
+ * Samsat Linux 1 09 00 20 00
+ * Startrack SRT 2020 HD 09 00 21 00
+ * FullHD FH 2020 HD 09 00 ?? 00
+ * Yumatu Spark 09 00 ?? 00
+ * Visionnet Hammer 5400 09 00 21 00
+ * Visionnet Fireball 101 09 00 21 00
+ * Superbox S750 09 00 15 00
+ * Sogno Spark Revolution 09 00 43 00

wiki/pages/it/Supported-Recievers

-                      r39056
+                      r39063
+----
+'''7 Compatable Revievers''' [=#point7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0.2 Main page])
+----
+=== Currently, the following receivers are supported: ===
+  * Atemio 510/520/530
+  * Atemio 7600
+  * Atevio 700/7000
+  * Kathrein UFS 910
+  * Kathrein UFS 912/922 (license charges may apply)
+Recently TitanNit has been made available for a variety of non-Atemio Receivers. Identical SH4 Fortis Receivers may work with TitanNit.
+This list has not yet been confirmed and some of these models may be incompatible with TitanNit.
+If you have successfully installed TitanNit on your Receiver please inform an admin member so this list can be updated.
+Please Note:
+  * Due to differences between the VFDisplay programming and the supplied Remote Control units delivered with your Receiver a remapping of the remote control Layout may be necessary.
+  * Pre-Release Versions with the loader version 1.19 had problems when installing versions 1.21 and 1.54 and demand a replacement of the VF-Display in order for the Receiver to boot. Fault is an inbedded security feature. Therefor it is unknown if iboot will actually function with the Receivers. If you have one of these decoders it would be advisable to take caution installing iboot.
+=== Atevio AV 500 HD: ===
+Model HS- 9510HD PVR and possibly identical boxes:
+  * Fortis HS- 9510 HD PVR 20000300 Korea.
+  * Rebox RE- 4000HD PVR 20010300 Netherlands.
+  * Octagon SF- 1008 20020300 Germany.
+  * Octagon SF -1008 SE 20020303 Germany.
+  * HD Box FS- 9100HD 20030300 Czech Republic.
+  * Ultra Plus HD 980 20050300 New Zealand.
+  * Openbox S5 HD PVR 20060302 Ukraine.
+  * Tiviar S1 eco HD PVR 20070300 U.S.A. Switzerland .
+  * Astro ASR 1100 Single HD 20110300 and 20110303 Germany .
+  * Dreamsky DSR- 9600HD PVR 20120302 Belarus.
+  * Skyway Classic 20130302 Russia.
+  * I.Com HD -9000 DIVX 20140300 Syria.
+  * I.Com HD -9000 DIVX II 20140702 Syria.
+  * I.Com HD -9100 DIVX II 20140602 Syria.
+  * XSPEED HD -9500 DIVX II 20140612 Syria.
+  * Optibox Koala HD 20150300 Hungary.
+  * Xcruiser XDSR400HD 20160302 Dubai.
+  * VisionNet FS- 9510 HD PVR 20170302 Israel.
+  * Gold Master HD -1060 HD PVR HD PVR -1070 -1080 PVR 20180302 Turkey
+  * Powersat PO - 1000HD PVR 20190301
+  * Star Track SRT 2010 HD 20210302 Dubai
+  * O2 SRT 2012 HD 20210301 Dubai
+  * Forever HS- 9510HD PVR 20220302 Algeria
+  * Dynavision DV -9500 HDPVR 20230302 Dubai
+  * Dynavision DV -9600 HDPVR 20230301 Dubai
+  * GI S- 8290 HD PVR 20240602 Romania
+  * Miraclebox 8 HD TWIN PVR 20250600 Sweden
+  * Diginor 8800 HD 20260600 Sweden
+  * Media Star ( Powers) HD 1200s 20270600 Australia
+  * MaxFly 9500 HD 20280602 Syria
+  * SuperBox SX 9518 HD 20300302 Moldova
+  * Elcomax Elux I 20310301 Iran
+[#point7 Top of Page]
+=== Atevio AV 7000 HD: ===
+The models FS- 9000 and FS -9200 differ due to option of including an internal harddisk.
+FS- 9000 HD PVR and possibly identical boxes
+  * Fortis FS- 9000HD 20000000 Korea
+  * Rebox RE- 9000HD 20010000 Netherlands
+  * Octagon SF 1018 20020000 Germany
+  * HD Box FS -9300 HD 20030000 Czech Republic
+  * Ultra Plus F- 9000HD 20050000 New Zealand        ''' Confirmed by ''' ([http://www.aaf-digital.info/forum/member.php?24970-professor_jonny Professor_Jonny])
+  * Openbox S8 HD PVR 20060000 Ukraine
+  * Tiviar F1 HD PVR USA 20070000 Switzerland
+  * Icecrypt S4000 HDPVR 20080000 England
+  * Skyway Diamond 20130000 Russia
+  * Dynavision DV -9000 HDPVR 200230000 Dubai
+FS- 9200 HD PVR and possibly identical boxes
+  * Fortis FS- 9200HD PVR 20000100 Korea
+  * Rebox RE- 8000HD 20010100 Netherlands
+  * HD Box FS- 9200HD 20030100 Czech Republic
+  * Arcon Titan 2010HD 20040100 Germany
+  * Openbox S7 HD PVR 20060100 Ukraine
+  * Tiviar T1 HD PVR 20070100 Switzerland
+  * Astro ASR 1200 Twin HD 20110100 Germany
+  * Dreamsky DSR- 9700HD PVR 20120100 Belarus
+  * Skyway Platinum 20130100 Russia
+  * I.Com Twin HD -9200 DIVX 20140100 Syria
+  * I.Com Twin HD -9200 DIVX II 20140101 Syria
+  * Gold Master 1090 HD PVR 20180100 Turkey
+  * Dynavision DV -9200 HDPVR 20230100 Dubai
+[#point7 Top of Page]
+=== Atevio / Atemio AV 7500/7600 HD: ===
+Model HX -8200 HD PVR and possibly identical boxes
+  * Fortis HX -8200 HD PVR 230000X0 Korea
+  * Rebox RE -8500 HD PVR 230100X0 Netherlands
+  * Octagon SF 1028P Noblence 230200X0 Germany
+  * Skyway Droid 230400X0 Russia
+  * Openbox S9 HD PVR 230500X0 Ukraine
+  * Icecrypt STC6000HDPVR 230600X0 UK
+  * Miraclebox 9 HD TWIN PVR 230700X0 Sweden
+  * Xcruiser XDSR600HD 230900X0 Dubai
+  * Ultra Plus X - 9200HD PVR 231200X0 New Zealand
+  * Skys @ t Royal HD PVR 231500X0 Bulgaria
+  * SuperBox PRO HD 9818 231600x0 Moldova
+  * Optibox Raptor HD 231800X0 Hungary
+  * Forever HD PVR 8200 231900X0 Algeria
+  * Media Star ( Powers) HD 8200S 232700X0 Australia
+[#point7 Top of Page]
+=== Atemio AM 500/510 HD: ===
+Model HS -7110 HD PVR and possibly identical boxes
+  * Optibox Gekko HD 250102X0 Hungary
+  * Octagon SF 918 SE + 250202X0 Germany
+  * Rebox RE -2200 HD PVR 250302X0 Netherlands
+  * Skyway LIGHT 250502X0 Russia & Belarus
+  * HD Box FS- 7110HD 250602X0 Czech Republic
+  * Openbox S4 HD PVR 250902X0 Ukraine
+  * Icom HD 1070P DIVX 251002X0 Syria
+  * Gold Master HD -1040 HD PVR -1045 PVR 251102X0 Turkey
+  * Dynavision DV -5000 HDPVR 251202X0 Dubai
+  * GI S8580 251302X0 Romania
+  * Xcruiser XDSR 380HD 251802X0 Dubai
+  * Dreamsky HD4 252002X0 Belarus
+  * ? Supermax 7100 252102X0 ?
+  * Skys @ t Mini HD PVR 252202X0 Bulgaria
+  * Icecrypt S3500 HDCCI 252502X0 UK
+  * Miraclebox 6 HD TWIN PVR 252602X0 Sweden
+  * Vegasat X1 252802X0 Morocco
+[[br]][#point7 Top of Page]

wiki/pages/it/Swap

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.8.6.6 Swap''' [=#point3.7.8.6.6] ([wiki:System-Info#point3.70.8.6 System Infos (Back])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Swap.jpg)]][[br]]
+>
+Here you can view the detailed info on the swap.
+[[br]]
+[[br]]

wiki/pages/it/System-Info

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.8 System Info''' [=#point3.7.8] ([wiki:Interface-Operation#point3.7 Information (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/System_Info_main.jpg)]][[BR]]
+>
+> here you can view system wide information.
+[[br]]
+ * ([wiki:System-Status#point3.7.8.1 System Status])
+ * ([wiki:Free-Space#point3.7.8.2 Free Space])
+ * ([wiki:Kernel#point3.7.8.3 Kernel])
+ * ([wiki:Mounts#point3.7.8.4 Mounts])
+ * ([wiki:System-info-Network#point3.7.8.5 Network])
+ * ([wiki:Ram#point3.7.8.5 Ram])
+ * ([wiki:System-Infos#point3.7.8.6 System Infos])
+[[br]]

wiki/pages/it/System-Infos

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.8.6 System Info''' [=#point3.7.8.6] ([wiki:System-Info#point3.7.8.6 System Infos (Back])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/System-Info-System-Infos.jpg)]][[BR]]
+>
+> here you can view system wide information.
+[[br]]
+ * ([wiki:CPU#point3.7.8.6.1 Cpu])
+ * ([wiki:Memory#point3.7.8.6.2 Memory])
+ * ([wiki:MTD#point3.7.8.6.3 MTD])
+ * ([wiki:Module#point3.7.8.6.4 Module])
+ * ([wiki:Devices#point3.7.8.6.5 Devices])
+ * ([wiki:Swap#point3.7.8.6.6 Swap])
+ * ([wiki:Top#point3.7.8.6.7 Top])
+ * ([wiki:prozesslist#point3.7.8.6.8 prozesslist])
+ * ([wiki:USB#point3.7.8.6.9 USB])
+[[br]]

wiki/pages/it/System-Status

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.8.1 System Status''' [=#point3.7.8.1] ([wiki:System-Info#point3.7.8 System Info (Back])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/System-Status.jpg)]][[br]]
+>
+Here you can view the system status of the receiver.
+[[br]]
+[[br]]

wiki/pages/it/System-Update

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.7 System Update''' [=#point3.5.7] ([wiki:Interface-Operation#point3.5 System (Back)])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/system-System_Update.jpg)]][[BR]]
+>
+>here you can proform a system update
+[[br]]
+ ||'''Flashupdate (Online):''' ||Update flashmemory from online Library.||
+ ||'''Flashupdate (tmp):''' ||Update Flashmemory from tmp.||
+ ||'''USBupdate (tmp):''' ||Update USB device from tmp.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]

wiki/pages/it/System-info-Network

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.8.4 Network''' [=#point3.7.8.4] ([wiki:System-Info#point3.7.8 System Info (Back)])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/System-info-Network.jpg)]][[br]]
+>
+Here you can view info on you network interface.
+[[br]]
+[[br]]

wiki/pages/it/TPK-Install

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.4.4 TPK Install (Online)''' [=#point3.4.4] ([wiki:Interface-Operation#point3.4 Extentions (Back)])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/extensions_TPK-Install(Online).jpg)]][[br]]
+>
+>here you can install plugins from from the online repo
+[[br]]

wiki/pages/it/TPK-Media

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.4.6 TPK Media (Media)''' [=#point3.4.6] ([wiki:Interface-Operation#point3.4 Extentions (Back)])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/extensions_TPK-Install(Media).jpg)]][[br]]
+>
+>Here you can install tpk plugins from a local source
+[[br]]

wiki/pages/it/TPK-Remove

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.4.7 TPK Remove''' [=#point3.4.7] ([wiki:Interface-Operation#point3.4 Extentions (Back)])
+>
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/TPK_Remove.jpg)]][[BR]]
+>
+>here you can remove your tpk plugins
+[[br]]

wiki/pages/it/TPK-Tmp

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.4.5 Installieren (TMP)''' [=#point3.4.5] ([wiki:Interface-Operation#point3.4 Extentions (Back])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/DE/extensions_TPK-Install(tmp).jpg)]][[br]]
+>
+>here you can install tpk plugins from your tmp directory.

wiki/pages/it/TPK-Upgrade

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.4.3 TPK Upgrade''' [=#point3.4.3] ([wiki:Interface-Operation#point3.4 Extentions (Back)])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/DE/extensions_TPK-upgrade.jpg)]][[br]]
+>
+>here you can automatically upgrade your installed plugins from the online repo
+[[br]]

wiki/pages/it/Testpage

-                      r39056
+                      r39063
+[[TranslatedPages]]
+Test code:
+[[CollapsibleStart]]
+nested text.
+[[CollapsibleEnd]]

wiki/pages/it/Time-to-sleep

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.5.4 Time to sleep''' [=#point3.5.5.4] ([wiki:Hard-Disk#point3.5.5 Hard Disk (Back])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Time-to-sleep.jpg)]][[br]]
+>
+Here you can configure your harddisk sleep settings.
+[[br]]
+[[BR]]

wiki/pages/it/Timeshift-Settings

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.6.7 Timeshift Settings''' [=#point3.6.7] ([wiki:Interface-Operation#point3.6 Settings (Back)])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Timeshift_Settings.jpg)]][[BR]]
+>
+Here you can edit your timeshift settings
+[[br]]
+ ||'''Timeshift Type''' ||Select the operation mode of the timeshift function.||
+ ||'''After Timshift:''' ||If timshift is stopped what function that should the reciever do.||
+ ||'''Ask on channel switch:''' ||Ask what to do with the timeshift file on channel change.||
+ ||'''Use Numeric Keys:''' ||use the numeric keys to control the timeshift skip and jump functions.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]
+----

wiki/pages/it/Timezone

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.6.3 Timezone''' [=#point3.6.3] ([wiki:Interface-Operation#point3.6 Settings (Back)])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Timezone.jpg)]][[BR]]
+>
+>here you can change your timezone.
+[[br]]

wiki/pages/it/Titan-Changelog

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.6 Titan Changelog''' [=#point3.7.6] ([wiki:Interface-Operation#point3.7 Information (Back)])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Titan_Changelog.jpg)]][[BR]]
+>
+> here you can view the git changelog.
+[[br]]

wiki/pages/it/Top

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.8.6.7 Top''' [=#point3.7.8.6.7] ([wiki:System-Info#point3.7.8.6 System Infos (Back)])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Top.jpg)]][[br]]
+>
+Here you can view the detailed Process info.
+[[br]]
+[[br]]

wiki/pages/it/Translation

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''16 Translation''' [=#point16] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'''The initial english section and Translation was provided By Professor_jonny'''
+You may contact me on the AAF forum if you have any suggestions or additions to add to the wiki:
+([http://www.aaf-digital.info/forum/member.php?24970-professor_jonny Professor_Jonny])

wiki/pages/it/Troubleshooting

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''12  Troubleshooting ''' [=#point12] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+== Troubleshooting Contents ==
+This section explains how to formally submit a bug and provide debug logs so that this imformation is provided to the developers to action, it will explain how to use the trac ticket system to check and submit bugs for futher analisis.
+* Only a __registered__ Users__ can create __Tickets__. If you are not yet registered, you can register here __[http://sbnc.dyndns.tv/trac/register Register]__
+* The __User__ must be logged in, You can __[http://sbnc.dyndns.tv/trac/login Login]__ here
+* To achieve a faster and easier __trouble shooting__, we now offer the __Ticketsytem__. That way you can directly pinpoint your __error__ to the competent __Developer__. In the next steps we will explain the new __Ticketsystem__.[[Br]]
+* First, check the existing __ Tickets__ if the error has already been reported. This is done as follows. [[Br]]
+  * Click the button __[http://sbnc.dyndns.tv/trac/report View Tickets]__ or go directly to __[http://sbnc.dyndns.tv/trac/report/1 Active Tickets]__.[[br]]
+  * Click on __[http://sbnc.dyndns.tv/trac/search Search]__ and tick the __Tickets__ and begin the search.
+  * Here you can see the current __active Tickets__, if the same error is listed, you can attach your error message to the __Ticket__.[[Br]]
+ please select an item below for more information.
+ * ([#point12.1 12.1 Bug Reporting])
+ * ([#point12.2 12.2 Bug Update])
+ * ([#point12.3 12.3 Bug Resolve])
+ * ([#point12.4 12.4 Debuglevel])
+ * ([#point12.5 12.5 Debug logging])
+[[br]]
+----
+'''12.1 Report a new Error''' [=#point12.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+* You have discovered a new bug and it has not been reported so you want to create a new ticket[[br]]
+* Click the button __[http://sbnc.dyndns.tv/trac/newticket New Ticket]__[[br]]
+  * The following fields __need__ to be filled in.[[Br]]
+    * __Summary:__
+      - This is the __displayed name__ of the reported error[[br]]
+    * __Description:__
+      - Copy the link from the __[http://www.aaf-digital.info/forum/forum.php AAF Board (Community)]__ where the posting was made.
+      - If no posting excists in the __Community__ you can describe the error here.[[br]]
+    * __Component:__
+      - Set the critaria suiting the error so the appropriate __Developer__ is informed.[[br]]
+    * __Responsible:__
+      - Here the ticket can explicitly be assigned to a specific __Developer__.
+  * The following fields can be __filled in__. [[Br]]
+    * __Priority:__
+      - Blocker - __very urgent__ the __ticket__ requires urgent attention.
+      - Critical - __urgent__ other tickets or processes depend upon this error.
+      - Major - __standard__ urgency (__default__).
+      - Minor - __minor__ has a lot of time and __is not so important__.
+      - trivial - __of no importance__ has even more time and __is least__ important.
+    * __Milestone:__
+      - Default is __standard__ if a more appropriate urgency is required it can be used.
+    * __Tags__
+      - This information is used by the __[http://sbnc.dyndns.tv/trac/search Search]__ - is usually not specified/required.
+    * __Version:__
+      - Is only applicable from version __2.0__
+    * __Observer:__
+      - Only a __Developer__ need to fill in this field if he wants to assign this ticket to a __User__, the user then sees it in __[http://sbnc.dyndns.tv/trac/report/7 My Tickets] __
+  * To complete the ticket you click on the field __create Ticket__
+[[br]]
+[#point12 Top of Page]
+----
+'''12.2 Bug Update''' [=#point12.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+* You have discovered a bug and it has been reported but you have aditional information that may be helpfull to the developers to repair the problem or have aditional comments on the problem[[br]]
+* Click the __[http://sbnc.dyndns.tv/trac/report Show Tickets]__ > __[http://sbnc.dyndns.tv/trac/report/1 Active Tickets]__ or __ [http://sbnc.dyndns.tv/trac/search Search]__ Button and __open__ the existing.[[br]]
+  * The following fields __must__ be filled in.[[Br]]
+    * __Add comment__:
+      - Here you can add more details to the error description.[[br]]
+  * To complete the ticket you click on __Submit changes__
+[[br]]
+[#point12 Top of Page]
+----
+'''12.3 Bug Resolve (Report error as completed)''' [=#point12.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+* You have discovered a previously reported bug is now fixed and want to close the ticket to inform the dev the bug is now fixed.[[br]]
+* Click on __[http://sbnc.dyndns.tv/trac/report View Tickets]__ > __[http://sbnc.dyndns.tv/trac/report/1 Active Tickets]__ and open the respective ticket[[br]]
+  * Scroll down to Action and set the field __resolve as__ to __fixed__
+  * Click on the field _Submit changes__
+[[br]]
+[#point12 Top of Page]
+----
+'''12.4 DebugLevel''' [=#point12.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+* In the Configuration file /mnt/config/titan.cfg you can set following debug levels
+  * Minimal: 10
+  * TopfieldVFD: 40
+  * Media Center: 50
+  * MenuList: 60
+  * Network Browser: 70
+  * Hard Disk: 80
+  * Screensaver: 90
+  * Tithek: 99
+  * Global: 100
+  * Ipkg: 130
+  * Imdb/imdbapi/TMDB: 133
+  * Eplayer: 150
+  * Tuning: 200
+  * Stream/Record/Softcam: 250
+  * Radio text: 270
+  * Subtitle: 300
+  * EPG: 400
+  * MediaDB: 777
+  * Mutexes: 900
+  * Function (in/out): 1000
+* The default debug level = 10
+[[br]]
+[#point12 Top of Page]
+----
+'''12.5 Debug Logging''' [=#point12.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+Logging is a means of getting debug messages from the reciever for development and bug tracking purposes, this can be used to attach to a bug report or track ticked to assist the developer to find where a problem or bug may be traced from.
+* You have several options for logging
+ * via Telnet:
+  * A Network connection is assential
+  * Client ([http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty]) configure the PC for Telnet session
+  * Open the Telnet session to the receiver
+  * killall -9 rcS titan
+  * Set: ([#point112.4 DebugLevel=])
+  * titan /mnt/config/titan.cfg > /tmp/titan.error.log 2>&1
+  * To terminate logging press (ctrl+z)
+  * Copy the log file (/tmp/titan.error.log) to your PC via ftp and send it as a ticket to the respective Developer
+ * Via RS232 (serial connection)
+  * A Serial connection must consist
+  * Configure ([http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty]) on the PC for Serial
+  * Open serial session to the receiver
+  * Then send it as a ticket to the respective Developer
+* Using debug Images you can also query the kernel messages via a telnet session
+  * Network connection must exist
+  * Configure ([http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty]) on the PC for Serial
+  * Open serial session to the receiver
+  * cat/proc/kmsg > /tmp/titan.kernel.log 2>&1
+  * To terminate logging press (ctrl+z)
+  * Copy the log file (/tmp/titan.kernel.log) to your PC via ftp and send it as a ticket to the respective Developer
+[[br]]
+[#point12 Top of Page]

wiki/pages/it/Tuner-Configuration

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.1.1 Tuner Configuration''' [=#point3.5.1.1] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Tuner-Configuration.jpg)]][[br]]
+>
+Here you can setup your tuner and proform a channel scan.
+[[br]]
+work in progress temp data:
+ ||'''Tuner 0/0''' ||Select the conection method for tuner 0.||
+ ||'''Tuner 1/1''' ||Select the conection method for tuner 1.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+ '''Coloured Button's Functions'''
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the Tuner configuration menu.
+  Please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Edit tuner)''' ||Edit the settings for the selected tuner please see ([#point103.50.1.2 advanced tuner settings menu]) for more info.||
+ ||'''Green Button: (Edit motor)''' ||Edit the motor settings for the selected tuner.||
+>'''Advanced Tuner Settings Menu''' [=#point103.50.1.2]
+ ||'''Satellite type''' ||Select the tuner to lnb connection method (Diseqc, Single or Expert.||
+ ||'''sat (number)''' ||select the satelite name connected.||
+ ||'''Diseqc:''' ||Select the port for the selected satellite.||
+ ||'''Lnb/ Unicable''' ||Bring up a the lnb settings for the selected satellite, select this item and press the red button set and adjust these settings see ([#point103.50.1.3 Advanced LNB settings menu]) for more info.||
+>'''Advanced LNB Settings Menu''' [=#point103.50.1.3]
+''This menu contains the advanced lnb settings''
+ ||'''Voltage Mode''' ||Selects the lnb voltage function.||
+ ||'''Tone Mode''' ||Selects the lnb tone function.||
+ ||'''LOF/ unicable''' ||select the lnb type and lnb frequency settings for it.||
+ '''Red Button: (Unicable manufacturer.''' select the unicable lnb manufacturer

wiki/pages/it/USB

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.8.6.9 Usb''' [=#point3.7.8.6.9] ([wiki:System-Info#point3.7.8.6 System Infos (Back)])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/USB.jpg)]][[br]]
+>
+Here you can view the detailed info on the ubb hosts and devices.
+[[br]]
+[[br]]

wiki/pages/it/USB-Device

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.18.3 USB Device''' [=#point3.5.18.3] ([wiki:Auto-Start-Settings#point3.5.18 Autostart Settings (Back)])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Autostart_Settings-USB_device.jpg)]][[br]]
+>
+Here you can check and adjust autostart settings for usb devices.
+[[br]]
+ ||'''Load Partition:''' ||Auto load partitions from usb devices on startup.||
+ ||'''NTFS write:''' ||Set the ntfs write option or driver.||
+ ||'''Swap:''' ||enable swap file on usb device.||
+ ||'''Swap Size:''' ||set the max size for the swap file on usb devices.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.

wiki/pages/it/VFDisplay

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.6 VFDisplay''' [=#point3.5.6] ([wiki:Interface-Operation#point3.5 System (Back)])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/system-VFDisplay.jpg)]][[BR]]
+>
+>Here you can edit the settings of the VFDisplay
+[[br]]
+ ||'''Brightness''' || use the D-pad keys to adjust the brightness of the VFD.||
+ ||'''Standby Brightness:''' || use the D-pad keys to adjust the brightness of the VFD.||
+ ||'''Show in VFD:''' ||What to show in the VFDisplay when the system is running.||
+ ||'''Show in Standby:''' ||What to show in the VFDisplay when the system is in standby.||
+ ||'''Behavior at Recording:''' ||What to show in the VFDisplay when the system is recording.||
+ ||'''LED Brightness Running''' || set the brightness of the led when the system is running.||
+ ||'''LED Brightness Standby'''  || set the brightness of the led when the system is in standby.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]

wiki/pages/it/Versions

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''6 Versions''' [=#point6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+For the latest version of TitanNit please visit the [http://www.aaf-digital.info AAF-Board]
+'''USB Release History'''
+ * Atevio7000 tiTan pre Alpha USB
+ * ATevio7000 tiTan pre Alpha v1.2a USB
+''Flash Release History''
+'''tiTan pre Alpha'''
+'''tiTan pre Alpha v1.2a'''
+Changelog Version 1.2A
+- Protect Channel Free Time function
+  - Switches off after Pineingabe all channels for an adjustable time free
+  - Virtual keyboard as input means for input boxes on help -/Text button
+  - Fixes in Deep Standby / Record / Timeshift
+  - TV / Radio on bluekey can be laid
+  - Aktualisert station list
+  - Minor fixes
+  - Radio station list
+[[br]]
+----
+'''Titan version 1.23'''
+----
+Changelog Version 1.23 :
+ - Kernel update on stm24 P211
+ - TMDB / imdb / imdbapi fixed
+ - Tithek youtube fix
+ - Add mhw and MHW2
+ - One step OpenTV
+ - One step dvb -t
+ - Shut-off timer in the web
+ - Display setting to in the Infobar of every consignment -
+ - Fix newsletter on and off
+ - Fix blind scan
+ - Fix gmediarender pic view
+ - Fix nas share as record mount
+ - Load save video mode in mc
+ - Fix autostart dlna
+ - Fix eth0 = off
+ - Fix manual imdb scan
+ - Add info button to miniplayer
+ - Add news category to tithek mainmenu
+ - Add temp to sort miniplayer
+ - Fix myvideo
+ - Add short epg / press 0 in channel list
+ - Fix MediaDB
+ - Fix webif cable
+ - Fix -> set cursor to next cammera
+ - Update all skins
+ - Wlan optimize
+ - Fix patches for lcd support
+ - Update Settings and Picons
+ - Fix boot logo
+ - Add start script before tv
+ - Fix driver patch
+ - Change adjust skin
+ - Fix blinking clock
+ - Fix formula auto volume change
+ - Fix rectimer after event
+ - Optimize tithek
+ - Fix mute on channel switch
+[[br]]
+----
+'''Titan Version 1.24'''
+----
+ - Changelog Version 1.24
+ - New Channel List
+ - Library continued to improve
+ - EPG improved
+ - Format ext3
+ - Hard drive detection improved ( File Check )
+ - Improved search settings -
+ - Added marker for recording -
+ - Add resettv to begin of HbbTV start
+ - Add facebook, gmediarender , call monitor , perl / samsung lcd, zapback picture
+ - Add Atemio preview videos
+ - Fix transponder
+ - Change wlan driver
+ - Add slow motion
+ - Fix picons
+ - Fix AddConfig vol
+ - Fix jfs
+ - Fix weather
+ - Add -D cable swap Picons
+ - Update almost all skins : fix choiceminitv , add usecec & change name ...
+ - Fix play marker
+ - Tithek add cache playback ( 10mb/180s )
+ - Update picons white70 THX matze70
+ - Update unitymedia cable THX Settings caliban
+ - Add picon sat1 gold transparent
+ - Add picons transparent Syfy HD and 13th HD
+ - Update sat default settings
+ - Tithek add new hoster
+ - Use ext3 as default format hdd
+ - Show different channel name in scan list
+ - Add cec support / titanium not only the driver
+ - Fix timer
+ - Add DVB-T, Support THX gost
+ - Fix blind scan settings
+ - Update channel Ulyanov sat
+ - Update channel sat default
+ - Update matze70 default settings
+ - Update Settings matze70 new design
+ - Fix miniplayer
+ - Update almost all skins : add cross control , emucontrol & MiniTV
+ - Update titan_grey swapskin (old default)
+ - Fix mute atevio7000
+ - Default skin , remove hidden = yes; cross control , emucontrol & MiniTV
+ - Update default skin , just some re - formatting
+ - At7000 little led fix
+ - Update almost all skins , at7000 led brightness
+ - Fix ... stop if not used
+ - At7000 at led brightness final
+ - Update infobar enable vol + / - on rcleft / rcright enable ch + / - on ...
+ - New weather icons
+ - Add timote
+ - Update all 0815 skins
+ - Update tobayer01 skins , small fix in epgsearch , set fontcol2
+ - Write config newsletter direct entry
+ - Add timeout newsletter and save only if no timeout
+ - Update cool & coolMiniTV swapskins
+ - Next fix ac3 increase enlarge
+ - Fix youtube
+ - Fix rectimer after event
+ - Fix for webif atevio700/7000
+ - Update vpn
+ - [ Vpn ] update tun.ko to P211
+ - Update newsletter start / stop
+ - Fix blinking clock
+[[br]]
+----
+'''Titan Version 1.25'''
+----
+ - Changelog Version 1.25
+ - Fixed problems when shooting and switching with multi-tuner
+ - CI module recognition improved, inter alia, Fixed maxcam and Unicam problems
+ - EPG Quick Facts added in the menu. Can also be used by pressing the " 0" are called in the station list.
+ - Automatic backup (user data such as channel lists , network settings , etc. are automatically moved from the v1.25 in a personal folder and the online update again Made . )
+ - Update the driver for the card reader
+ - Bouquet / Favorites list change in the EPG view the << >> buttons
+ - Automatic subtitle start ( below picture and sound settings adjustable)
+ - Added Permanent Time-Shift function ( beta / trial version) OMay under Main Menu -> Settings -> TimeShift settings are activated.
+ - WLAN optimized settings
+ - Multimedia features further improved
+ - Fixed problems playing and the forward and rewind recordings
+ - Search for repetitions in the EPG view by pressing the "0" key added
+ - Easy Sleep Timer: In addition to entering the numbers can also press the << >> buttons to set the time
+ - Switch off after receiving end -shutdown on possible OIM Sleep Timer menu , press the " GREEN" for turning off " the mission end "
+ - Message added the automatic shutdown (eg after an exposure) , in which one has the opportunity to stop the shutdown.
+ - Direct retrieval of detailed information transmitter by pressing the Info button ( 2x)
+ - Einstellbar under System Settings " Second Infobar "
+ - Buffer size and resolution of Internet streams can be selected when retrieving a stream
+ - Tuner can be disabled via the menu
+ - Added · New menu item " Audio Delay " under picture and sound settings
+ - SATA port for hard drive can now be selected in System Settings (SATA Connector = internal / external)
+ - Programmed series can be stored in a separate folder now
+ - press OIM Recording Timer menu "Create Directory " button "RED" for
+ - Online Gallery / TiThek : adaptation of the menu view ( size of the images ) by pressing the menu button.
+ - [AM 7600 ] New menu item " behavior in the Title" VFDisplay menu added (flashing , fade out / in , show record ... ) .
+ - Update the icons / symbols in the Infobar , channel list and EPG view
+[[br]]
+----
+'''Titan Version 1.30'''
+----
+ - Changelog Version 1.30
+ - Update station list Astra 19.2 and 13.0 Hotbrid
+ - Update library
+ - Update (menu interface) Skins
+ - New bootloader i -boot
+ - Boot times AM 500/510 HD under 16 seconds
+ - Boot times AM 7500/7600 HD PVR less than 20 seconds
+ - Image output on the TV right after the turn of the device.
+ - Various boat setting
+ - Simplify installation of future firmware updates
+ - Dual boot fit ( not yet active)
+ - New: stations can be assigned to individual CI modules now
+ - Main menu à System -> CI modules at Blue button (transmitter)
+ - Support for various CI modules improved.
+ - Improving the Wi-Fi settings
+ - Added display HDD / capacity in timer overview and Media Player
+ - Setting under : Main Menu à Settings à Skin Settings
+ - Fixed menu display problems in 3D mode
+ - EPG display improved (jumps with buttons 7 and 9 possible)
+ - Improved time-shift and permanent time shift function
+ - Sleep timer improves
+ - Improved unicable Settings
+[[br]]
+----
+'''Titan Version v1.32'''
+----
+ - Changelog Version 1.32
+ - Atemio AM 500 HD (incl. new i-boot bootloader)
+ - Atemio AM 510 HD (incl. new i-boot bootloader)
+ - Atemio AM 7500 HD PVR (including new i-boot bootloader)
+ - Atemio AM 7600 HD PVR (including new i-boot bootloader)
+ - Atevio AV 700 HD
+ - Atevio AV 7000 HD PVR
+ - Atevio AV 7500 HD PVR (including new i-boot bootloader)
+ - Update Channel List Astra 19.2 and 13.0 Hotbrid
+ - Update station list Unity Media and Kabel BW
+ - Update library
+ - XXX streams / portals can be hidden in the library. (Menu button in the library press)
+ - Problem with sorting in the FileList corrected and improved
+ - Added Smart Card menu item
+ - Improved file manager / file browser
+ - Hard disk indicator improved
+ - Repair function of var improves / mnt
+ - Auto Timer improves
+ - Errors in various TPK packages resolved.
+ - Record timer added in the web interface.
+[[br]]
+----
+'''Titan 1.45iboot'''
+----
+ - Changelog Version 1.32
+ - New iboot bootloader
+ * Memory management improved
+ * Extended Flash memory to 11MB
+ - Optimization of the channel search
+ - New plug-in ( TPK package) e2webserv
+ - Problem with subtitles resolved
+ - 2x rcyellow add to player for subtitle
+ - Support of 4TB hard drives
+ - Update Video Player
+ - Problem sorting the provider corrected
+ - EPG search improves
+ - Fixed problem with dlna
+ - Problem with NSFB and Call Monitor resolved
+ - Subtitle and EPG PID is stored in the recording
+ - ARD library added
+ - Update imdbfolder
+ - Update the various menu languages
+ - File Browser improves
+ - Swap mount problem solved
+ - Memory test before plugin installation added
+ - Installation of TPK packages improved.
+ - Installation FLASH (FLASH) : install in flash memory is deleted after a firmware update .
+ - MNT installation ( FLASH) : installation in the flash, still present after firmware update.
+ - SWAP installation (USB or HDD): Installing to USB / HDD , still present after image update .
+ - Titan -plugin- keymaps -neutrino • Fixed problems with plug
+ - Update all Skins
+ - Media Player improves
+ - improved CI module support
+ - Update Web Interface
+ - Added EPG Webtimer
+ - Screenshot Auto Refresh
+ - Fixed problem with recording button
+ - Update the list of channels
+ - unicable function ( single-cable ) improved
+ - Problems with unicable receiving fixed
+ - Permanent Time shift function improved. With the Play button can now be called up again the recording folder .
+ - improved WLAN function
+ - Added function to backup / restore settings
+ - Update the screen saver
+ - Support for ext4 -> storage media can be formatted now available in ext4 .
+ - Plug-in ( TPK packets)
+ - improved auto- timer plugin
+ - channel lists revised
+ - New plug Enigma2 WebIf API ( network) only .
+ * Allows access to TitanNit by an E2 clients (eg dreaMote App on Iphone ) . After installing the program on a Atemio receiver with TitanNit it is possible by means of an E2 - clients to control the receiver to stream channels and recordings , and manage the timer. This works both with a corresponding app on iOS or on a PC (or Raspberry Pi ) with the XBMC software ( VU +).
+ * We tested dreaMote Lite , dreaMote , e2RemoteHD and Dreambox Live on iOS , and with XBMC under Windows7 and Raspberry Pi
+ - Zapback advertising Zapper PlugIn
+ - Fixed problems with TPK packages "open VPN " and " gemediarender "
+[[br]]
+----
+'''Titan 1.47iboot'''
+----
+ - Changelog Version 1.32
+ - In the Media Center was "start at the last position" fixed.
+ - The RC Recall function for the Atemio 520 was installed.
+ - For remote controls, the RC-resolution and the RC mute on the Atevio700/7000 and Atemio 7600 all key bindings now work correctly.
+ - The resolution function has been extended for Scart and YUV.
+ - The recording of the screen shoot for the background image is taken after 10 min of recording, the recording is shorter then the first frame is taken.
+ - The Screenshoot function in Media Center on the Record button fixed.
+ - In the web interface at the Screenshoot now the video display plus the OSD will display.
+ - In the Media Center automatic TMDB / imdb wallpapers search has been fixed.
+ - The manual search in imdb has been fixed.
+ - Satellite channel lists default and adjusted TPK updates.
+[[br]]
+----
+'''Titan 1.49iboot'''
+----
+ - Changelog Version 1.47
+ - Changed hard drives formatting
+ - Revised Mount System
+ - Cutting function of the recordings
+ - Setting Updates
+ - HBBTV removed, thus in the image more Ram
+ - Library revised
+ - Panel Functions in the Image Settings
+ - Shifted Flash labels down
+ -  Installed Screenshoot with video -
+ - Mediatheques local search built
+ - Complete base image was updated
+ - Vizcam, mod oscam and oscam away YMOD
+ - Web browser favorites update
+ - Fix mute button
+ - Marker autoseek
+ - Fix gbox config
+ - Fixed TPK updates
+ - Update the channel lists for TPK and default list
+ - Adapted picons for new stations
+ - Skins adapted for new functions in the menus
+[[br]]
+----
+'''Titan 1.50iboot'''
+----
+The following ticket fixed:
+ - Internal Player - rewind does not work
+ - General - When updating the 520 one also sees the 5200 updates
+ - General - Web interface rc rc code image and adaptable boxes mipsel for both missing
+ - Audio - ac3 sound <- in tv mode has no influence lautstärle leveler
+ - LCD - Display AM 5000
+ - Ci - ci modules
+ - Media Center - Desktop Wallpaper Media Center missing
+ - General - plug-ins and settings will be lost after each update
+ - External player - volume leveler no effective
+ - Gui - showiframe still does not work
+ - Tuner - Second Tuner ( plug-in) will not appear in the 5200 / recognized
+ - General - Press CH up / down reversed
+ - component1 - xupnpd as a DLNA server
+ - Skins - ... infobar closed from tobayer
+ - Gui - hdd format it will not be displayed dateisyteme closed
+ - TitanNit - no record in standby
+ - System - NTFSwrite parameter resume in closed settings
+ - General - The wysiwyg display at the wiki editing brings erroneous entries
+ - General - Protection of minors has no effect
+ - General - [ Am520 ] flashing display for remote control operation
+ - General - shift caused by transmitters reboot the box
+ - General - scripts before and after shooting
+ - System - menu item will change color saturation color temperature
+ - General - Recovery time ( recoverrun ) is not saved
+ - TiThek - No thumbnails of each video in the TiThek
+ - General - Review Dutch translation
+[[br]]
+----
+'''Titan 1.53iboot'''
+----
+The following ticket fixed:
+all
+ - Revised channel lists
+ - Reworked skins
+ - LCD perl fixed
+ - Fix oscam nightly
+ - online Library extended (FilmOn TV)
+ - Improved channel search
+ - Picon adapted and added new channels
+ - deleted the 320x240 Picon Samsung LCD, please the X-Light install transparent.
+mipsel
+ - WLAN Fixed Atemio 5200
+ - Allow for e2 Telnet and FTP Atemio 5200
+----
+'''Titan 1.55iboot'''
+----
+Changelog:
+ - Added language files
+ - Fixed Skins
+ - Fixed Library (eg, rtl, RTL2, Super RTL, rtlnitro, ntv, vox, etc.) and added new hoster and inserted an improved search function
+ - Improved web interface (added online and off line help)
+ - Added IP boxes
+ - Added Ufs913
+ - Extended transponder and Settings
+ - Add PIP and installed Oled Skins for Atemio Nemesis
+ - EMU installation removed in Flash and configs extended

wiki/pages/it/Video-Player

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.2.2 Video Player''' [=#point3.2.2]([wiki:Interface-Operation#point3.2 Media Center (Back)])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Video_Player.jpg)]][[BR]]
+>
+>here you can play movies.
+[[br]]
+----
+ '''Coloured Button's Functions'''
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Sorting)''' ||Set the sort method for the files listed in the file list display.||
+ ||'''Green Button: (Filelist-Mode)''' ||Switch between filelist mode and playlist mode.||
+ ||'''Yellow Button: (Random)''' ||select random play mode.||
+ ||'''Blue Button: (Repeat)''' ||Select Repeat play mode.||
+ ||'''Menu Button: (Menu)''' ||This will show an advanced settings menu for the media player see below for more info on the functions contained with in this menu.||
+----
+ '''Advanced Media Player Menu'''
+[[br]]
+ videos:
+ ||'''Sort:''' ||Set the sort method for the files listed in the file list display.||
+ ||'''View:''' ||Switch between filelist mode and playlist mode.||
+ ||'''MediaDB Autoscan:''' ||Auto scan MediaDb in Background.||
+ ||'''Default Directory:''' ||Set the default directory to display when the media player opens.||
+ ||'''Use Last Directory:''' ||open the last used directory when the media player opens.||
+ ||'''Backdrop Interval:''' ||sets the change time of the background picture||
+ '''Coloured Button's Functions'''
+ ||'''Red Button: (Network)''' ||Set the sort method for the files listed in the file list display.||
+ ||'''Green Button: (Edit)''' ||Switch between filelist mode and playlist mode.||
+----

wiki/pages/it/Video-Settings

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.6.14 Video Settings''' [=#point3.6.14] ([wiki:Interface-Operation#point3.6 Settings (Back)])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/Video_Settings.jpg)]][[BR]]
+>
+here you can change your video display settings select a menu item and use the d pad left and right to adjust the setting see a list of a available settigs below.
+[[br]]
+ ||'''Brightness:''' ||Here you can edit the brightness of the display.||
+ ||'''Contrast:''' ||Here you can edit the Contrast of the display.||
+ ||'''Tint:''' ||Here you can edit the Tint of the display.||.||
+ To __"Store"__ the settings Exit from the Video Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]
+----
+ '''Coloured Button's Functions"
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Default)''' ||This will reset the Video settings to the default setting.||

wiki/pages/it/WLAN-Settings

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.4.2 WLAN Settings''' [=#point3.5.4.2] ([wiki:Network#point3.5.4 network (Back])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/IT/WLAN-Settings.jpg)]]br]]
+>
+Here you can check and adjust the settings for your wireless interface.
+[[br]]
+ ||'''SSID On Boot:''' ||Autostart the wireless interface on startup.||
+ ||'''SSID:''' || this shows the current SSID press the __"text"__ button to edit.||
+ ||'''Type:''' ||Set the security method.||
+ ||'''KEY:''' ||this shows the current security key press the __"text"__ button to edit.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]
+----
+ '''Coloured Button's Functions"
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Text Button: (keyboard)''' ||This will show you the past log history for the wireless interface.||
+ ||'''Red Button: (Search)''' ||This will reset the saved epg removing all program data.||
+ ||'''Green Button: (Start)''' ||On a customisable item this will bring up editor to edit a value or text string.||
+ ||'''Yellow Button: (Stop)''' ||Brings up the epg scan list and you may from there add aditional boquets to be scaned during an epg scan.||
+ ||'''Blue Button: (Log)''' ||This will show you the past log history for the wireless interface.||
+ ||'''Info Button: (Info)''' ||This will show you the information on the currently conected WLAN device.||

wiki/pages/it/Weather

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.2.7 Weather''' [=#point3.2.7] ([wiki:Interface-Operation#point3.2 Media Center (Back)])
+>
+>Menu Picture place holder:
+>
+>[[Image(http://sbnc.dyndns.tv/trac/export/26462/wiki/Wiki-Pictures/IT/weather.jpg)]][[br]]
+>
+>Weather is where you can view the weather around the world.
+[[br]]
+[[Image(http://sbnc.dyndns.tv/trac/export/26462/wiki/Wiki-Pictures/IT/weather_red_TEXT.jpg)]]

wiki/pages/it/Wiki

-                      r39056
+                      r39063
+[[TranslatedPages]]
+{{{#!div align=center valign=top style="border: none; font-size: 300%"
+Welcome to the TitanNit Wiki
+}}}
+----
+'''Noticeboard'''
+----
+[[Image(source:/ipk/source/bootlogos_TitanNit_0_3/_path_/etc/boot/bootlogo.jpg, 240px, align=right,link=http://www.aaf-digital.info/forum/forum.php)]]
+{{{#!html
+<form action="//sbnc.dyndns.tv/trac/search?q" method="get">
+<input type="text" name="q" value="" size="30"/>
+<input type="submit" value="Search wiki"/>
+-->
+</form>
+}}}
+This is the TitanNit Online Manual. Its existence is based solely on the contributions of the members of the community.
+This manual remains incomplete, although it comes closer on a daily basis, as the TitanNit software is continually being developed and improved this site is repeatedly extended and adapted.
+There may be functionality that does not yet exist in this manual, so please feel free to pitch in and make any changes you see fit, that way as TitanNit evolves this manual will continue to evolve as well.
+If you are unsure if you should put some information in here or not, please feel free to contact us on [wiki:Contact#point15 Skype].
+Registered users may edit and create pages, and if you wish to access the wiki svn to upload pictures via TortiseSVN please contact us on [wiki:Contact#point15 Skype].
+For those of you who help us by contributing to this wiki might want to keep an eye on the [[http://www.aaf-digital.info/forum/forumdisplay.php?278-TitanNit | TitanNit]] section in the forum, and we may be able to provide you with some developer only beta tools and updates for use to test functions and take forth comming screen shots for the wiki and to test new features.
+Currently translations for other languages would be high on the list if you are able to help with translation's on the wiki go for it if you are able to help with gui translations please see [wiki:External-Software-TitanNitLanguageEditor#point9.6 TitanNitLanguageEditor] for information on creating and submitting these to the devs.
+This manual was created in order to help the users of TitanNit as a place to consolidate the information accrued over the years on the AAFforum and to tap in the flow of information from the developers.
+Please note that information on Emus, Illegal decryption of channels, card sharing and the like is not allowed, any information placed on this wiki is up for editing and modification by the community so don't get angry if it is removed or edited.
+NO copyrighted content is to be placed on this wiki if you are not the copyright holder of pictures or information placed on here or blatently copy works from other sources you may be banned from the wiki and or forum.
+----
+'''Contents Section''' ([WikiStart#point0 Main page(language select)])
+[[br]]
+----
+{{{#!div style="width: 1100px; margin: auto"
+ {{{#!table style="border: none"
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Quick-Start-Guide.png,align=left,link=[wiki:Quick-Start-Guide#point0 Quick Start Guide])]]
+  }}}
+  '''[wiki:Quick-Start-Guide#point0 Quick Start Guide]'''[[br]]
+  {{{#!div style="float: left
+This section contains the quick start guide where users can set up titanin a short precise way.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/History.png,align=left,link=[wiki:History#point1 TitanNit Info])]]
+  }}}
+  '''[wiki:History#point1 TitanNit Info]'''[[br]]
+  {{{#!div style="float: left
+This section contains background information in reguards to TitanNit
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions.png,align=left,link=[wiki:Functions#point2 Interface Elements])]]
+  }}}
+  '''[wiki:Functions#point2 Interface Elements]'''[[br]]
+  {{{#!div style="float: left
+This setion contains information on the interface of TitanNit
+  }}}
+  }}}
+  |----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Interface-Operation.png,align=left,link=[wiki:Interface-Operation#point3 Interface and Operation])]]
+  }}}
+  '''[wiki:Interface-Operation#point3 Interface and Operation]'''[[br]]
+  {{{#!div style="float: left
+This section shows the interface and menu structure within TitanNit
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Remote-Device-Control.png,align=left,link=[wiki:Remote-Device-Control#point3.9 Remote/ Device Control contents])]]
+  }}}
+  '''[wiki:Remote-Device-Control#point3.9 Remote/ Device Control]'''[[br]]
+  {{{#!div style="float: left
+This section contains information on the control of titan from the various remote interfaces
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Architecture-Programming.png,align=left,link=[wiki:Architecture-Programming#point4  Architecture and Programming])]]
+  }}}
+  '''[wiki:Architecture-Programming#point4  Architecture and Programming]'''[[br]]
+  {{{#!div style="float: left
+This section contains information on the the various architecture and programming information regarding TitanNit
+  }}}
+  }}}
+  |----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Versions.png,align=left,link=[wiki:Versions#point6 Versions])]]
+  }}}
+  '''[wiki:Versions#point6 Versions]'''[[br]]
+ {{{#!div style="float: left
+This section explains the different versions of TitanNit and their differences.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Supported-Recievers.png,align=left,link=[wiki:Supported-Receivers#point7 Supported Receivers])]]
+  }}}
+  '''[wiki:Supported-Receivers#point7 Supported Receivers]'''[[br]]
+   {{{#!div style="float: left
+This section details the supported receiver models in TitanNit.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Installation-Recovery.png,align=left,link=[wiki:Installation-Recovery#point8 Installation / Recovery])]]
+  }}}
+  '''[wiki:Installation-Recovery#point8 Installation / Recovery]'''[[br]]
+  {{{#!div style="float: left
+This section contains information on how to install and recover your titan installation.
+  }}}
+  }}}
+  |----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software.png,align=left,link=[wiki:External-Software#point9 External Software])]]
+  }}}
+  '''[wiki:External-Software#point9 External Software]'''[[br]]
+  {{{#!div style="float: left
+This section explains external software for use with TitanNit.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Plugins.png,align=left,link=[wiki:Plugins-Contents#point10 Plugins])]]
+  }}}
+  '''[wiki:Plugins-Contents#point10 Plugin]'''[[br]]
+  {{{#!div style="float: left
+This section will show you the various plugins available for titan and their source codes.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Development.png,align=left,link=[wiki:Development#point11 Development])]]
+  }}}
+  '''[wiki:Development#point11 Development]'''[[br]]
+  {{{#!div style="float: left
+This section details information on how to develop plugins for TitanNit.
+  }}}
+  }}}
+|----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Troubleshooting.png,align=left,link=[wiki:Troubleshooting#point12 Troubleshooting])]]
+  }}}
+  '''[wiki:Troubleshooting#point12 Troubleshooting]'''[[br]]
+  {{{#!div style="float: left
+This section explains using the trac bug system.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Manufactures.png,align=left,link=[wiki:Manufactures#point13 Manufactures])]]
+  }}}
+  '''[wiki:Manufactures#point13 Manufacturers]'''[[br]]
+  {{{#!div style="float: left
+This section will show you information about various manufacturers of TitanNit capable hardware.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Community.png,align=left,link=[wiki:Community#point14 Community])]]
+  }}}
+  '''[wiki:Community#point14 Community]'''[[br]]
+  {{{#!div style="float: left
+This section details information on how to get support for titan.
+  }}}
+  }}}
+|----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Contact.png,align=left,link=[wiki:Contact#point15 Contact])]]
+  }}}
+  '''[wiki:Contact#point15 Contact]'''[[br]]
+   {{{#!div style="float: left
+This section has info on how to contact the TitanNit Team.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Translation.png,align=left,link=[wiki:Translation#point16 Translation])]]
+  }}}
+  '''[wiki:Translation#point16 Translation]'''[[br]]
+  {{{#!div style="float: left
+This section is for wiki editors to place translation marks there.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Disclaimer.png,align=left,link=[wiki:Disclaimer#point17 Disclaimer])]]
+  }}}
+  '''[wiki:Disclaimer#point17 Disclaimer]'''[[br]]
+  {{{#!div style="float: left
+This section contains a legal disclaimer.
+  }}}
+  }}}
+|----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Testpage.png,align=left,link=[wiki:Testpage#point17 Testpage])]]
+  }}}
+  '''[wiki:Testpage#point17 Testpage]'''[[br]]
+   {{{#!div style="float: left
+This is a test page for testing wiki code
+  }}}
+  }}}
+ }}}
+}}}
+----
+'''Screenshots of the interface'''
+----
+{{{#!div align=center valign=top style="border: none; font-size: 300%"
+[[Image(source:/wiki/Wiki-Pictures/IT/Mainmenu.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/Recordsand_EPG.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/Media_Center.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/Media_player.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/Extentions.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/System.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/Settings.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/Information.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/Standby_Poweroff.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/Playback-OSD.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/EPG-OSD.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/Internal-Player-OSD.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/Favourite-OSD.jpg, 250px)]]
+[[Image(source:/wiki/Wiki-Pictures/IT/Web_Control.jpg, 250px)]]
+[[br]]
+}}}

wiki/pages/it/WikiStart

-                      r39056
+                      r39063
+[[TranslatedPages]]
+{{{#!div align=center style="border: none; font-size: 300%"
+Benvenuti al Progetto TitanNit
+}}}
+----
+{{{#!div align=center style="border: none; font-size: 115%"
+ [=#point0]'''Si prega di selezionare la lingua''' :
+||= '''[wiki:de/Wiki#point0 Deutsch]''' =||= '''[wiki:en/Wiki#point0 English]''' =||= '''[wiki:fr/Wiki#point0 Français]''' =||= '''[wiki:gr/Wiki#point0 ελληνικός]''' =||= '''[wiki:it/Wiki#point0 Italiano]''' =||= '''[wiki:nl/Wiki#point0 Nederlands]''' =||= '''[wiki:pl/Wiki#point0 Polski]''' =||= '''[wiki:ru/Wiki#point0 Русский]''' =||= '''[wiki:vn/Wiki#point0 Vietnam]''' =||
+||= [[Image(source:/wiki/Wiki-Pictures/DE/de.png,link=wiki:de/Wiki#point0)]] =||= [[Image(source:/wiki/Wiki-Pictures/EN/en.png,link=wiki:en/Wiki#point0))]] =||= [[Image(source:/wiki/Wiki-Pictures/FR/fr.png,link=wiki:fr/Wiki#point0))]] =||= [[Image(source:/wiki/Wiki-Pictures/GR/gr.png,link=wiki:gr/Wiki#point0))]] =||= [[Image(source:/wiki/Wiki-Pictures/IT/it.png,link=wiki:it/Wiki#point0))]] =||= [[Image(source:/wiki/Wiki-Pictures/NL/nl.png,link=wiki:nl/Wiki#point0))]] =||= [[Image(source:/wiki/Wiki-Pictures/PL/pl.png,link=wiki:pl/Wiki#point0))]] =||= [[Image(source:/wiki/Wiki-Pictures/RU/ru.png,link=wiki:ru/Wiki#point0))]] =||= [[Image(source:/wiki/Wiki-Pictures/VN/vn.png,link=wiki:vn/Wiki#point0))]] =||
+[[br]]
+[[br]]
+}}}
+''' [wiki:TitleIndex#point Title Index] '''[[br]]
+'''[wiki:Wiki-Help-Contents#point0 Wiki Help Contents]'''

wiki/pages/nl/AV-Settings

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.6.1 AV Settings''' [=#point3.6.1] ([wiki:Interface-Operation#point3.6 Settings (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/AV-Settings.jpg)]][[BR]]
+>
+> here you can setup your audio and visual settings.
+[[br]]
+ ||'''Resolution (Default)''' ||Set the default resolution of the decoder.||
+ ||'''Resolution Current:''' ||Shows the current resolution of the decoder.||
+ ||'''Auto Resolution:'''  ||Do you want the EPG file to be deleted after being read.||
+ ||'''Policy:''' ||If the image does not suit the screen format what method shuld the decoder use to best fill the display.||
+ ||'''Aspect:''' ||Set the aspect ratio of the display.||
+ ||'''Colour Format''' ||Set the colour format of the hdmi output.||
+ ||'''Colour Format Scart/ Composite:''' ||Set the colour format of the composite and scart output.||
+ ||'''Audio Source:''' ||Select the audio source format.||
+ ||'''Ac3 Default:''' ||Do you wish for the default audio format to be AC3.||
+ ||'''Ac3 Mode:''' ||Set the output conversion format of the AC3 stream.||
+ ||'''Audio Delay:''' ||Set the delay or advance time of the audio signal to sync it with the video signal.||
+ ||'''Inc AC3 Audio in %:''' ||Increace ac3 audio volume in % of total volume.||
+ ||'''3D Mode:''' ||Output the tv signal in side by side or vertical 3d format.||
+ ||'''two step mute:''' ||Set the default function of the mute button lower volume then mute or just mute.||
+ ||'''automatic restart last subtitle:''' ||load the last used subtitle when playing back a recording or stream.||
+ ||'''Sound ampflier (tv modus/ internal player)''' ||Increace the volume amplification when  watching tv or using the default media player.||
+ ||'''Sound ampflier (external player)''' ||Increace the volume amplification when  using a third party media player.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]

wiki/pages/nl/About

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''About''' [=#point3.70.3] ([wiki:Interface-Operation#point103.70 Information (Back)])([wiki:Wiki#point0.2 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/about.jpg)]][[BR]]
+>
+> here you fiew information about the installed titan image.
+[[br]]

wiki/pages/nl/Adaptor-Settings

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.4.1 Adaptor Settings''' [=#point3.5.4.1] ([#point3.5.1 network (Back])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Adaptor-Settings.jpg)]]br]]
+>
+Here you can check and adjust the settings for your Eithernet Interface.
+[[br]]
+ '''Coloured Button's Functions"
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the settings menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Edit)''' ||This will bring up the edit interface dialogue of the selected Eithernet interface.||
+ ||'''Green Button: (Hostname)''' ||This will bring up the Hostname dialogue allowing you to edit the host name of the reciever.||

wiki/pages/nl/Adjust

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.6.6 Adjust''' [=#point3.6.6] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Adjust.jpg)]][[BR]]
+>
+>Here you can adjust various other settings of the decoder.
+[[br]]
+ ||'''Volume Bar Timeout''' ||How long the Volume Bar should display after chang of the volume.||
+ ||'''Infobar Sleep:''' ||timeperiod until the Infobar appears||
+ ||'''Infobar Timeout:''' ||How long the Infobar should display after being displayed.||
+ ||'''Second Infobar:''' ||what function should happen of a second press of the info key.||
+ ||'''Virtualzap Timeout:''' ||???||
+ ||'''Spinnerspeed:''' ||How fast the animated hourglass display should move.||
+ ||'''SpinnerTime:''' ||??? ||
+ ||'''Hangtime:''' ||How long to wait for something to happen before bringing up the crash display.||
+ || '''Fastzap:''' ||Use fast channel switching.||
+ ||'''Dont Clear TV on Zap (Only on Fastzap):'''|| keep the picture on the display during channel change but not during fast channel change. ||
+ ||'''Faststop:''' ||???. ||
+ ||'''Dir Sort:''' ||Select the mode for sorting directorys in file list displays. ||
+ ||'''Power Action:''' ||Function to preform on operation of the power button (Stand-By) or Switch Off (Deep Stand-By) ETC... ||
+ ||'''Fast Text Renderer:''' ||Use the hack Fasttext renderer to increace the speed of text displays. ||
+ ||'''Record Split Size:''' ||Set the size of recording files and break apart if the recording excedes the selected size. ||
+ ||'''Record Forerun (Min):''' ||Set the amout of time to pre record before the start of a timer recording. ||
+ ||'''Record Overrun (Min):''' ||Set the amout of time to record after a timer recording has finished.||
+ ||'''Set Action After Record:''' ||Set the function to preform after a recording or timer has finished.||
+ ||'''Skip 1/3:''' ||Set the playback skip time when you press the buttons 1 and 3. ||
+ ||'''Skip 4/6:''' ||Set the playback skip time when you press the buttons 4 and 6. ||
+ ||'''Skip 7/9:''' ||Set the playback skip time when you press the buttons 7 and 9. ||
+ ||'''Change Channelname Auto:''' ||Automatically change the channel name if it changes or new channels replace old ones. ||
+ ||'''Show Time Line in Channel list:''' ||Show the time display in the channel list display. ||
+ ||'''Animated Screens:''' ||Use anamated displays in the GUI. ||
+ ||'''Animated Speed:''' ||Set the speed of the anamated displays in the GUI if anamated displaus is enabled. ||
+ ||'''Channel List View:''' ||Should the channel list view be automatically hidden. ||
+ ||'''Show Last Position Question:''' ||During the startup of a media file do you wish to be asked where should the play start from. ||
+ ||'''Resync Recording Immediatly:''' ||During recording ignore data buffer and sync recording imediatly. ||
+ ||'''Recording Name:''' ||Change the default format of the name of the recording. ||
+ ||'''Newsletter:''' ||Show the news letter on startup. ||
+ ||'''Show Hidden Files:''' ||Show files that are makked as hidden in file list displays. ||
+ ||'''Expert Mode:''' ||Set expert mode to enable advanced functions. ||
+ ||'''Show Infobar on Program Change:''' ||Show the infobar when the channel is displayed. ||
+ ||'''Use Cross Control for Fast Zapping and Volume Control:''' ||Use the d-pad buttons for fastzap and volume control. ||
+ ||'''Deactivate Cript Support on Media Playback:''' ||Disable CA and Smartcard decoding when playing back a media file. ||
+ ||'''Deactivate Mini TV:''' ||Disable the mini TV picture when GUI elements are being displayed. ||
+ ||'''Playback Buffer Size:''' ||set the size of the read ahead buffer during playback of media files for smooth playback. ||
+ ||'''Time to Wait After Seek to Fill Buffer:''' ||Pausetime after seek to enable buffer to fill during playback to ensure smooth playback. ||
+ ||'''Community User:''' ||Set the default username for username propmts. ||
+ ||'''Community Pass:''' ||Set the default Password for password propmts. ||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]
+----

wiki/pages/nl/Architecture-Programming

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''5 Architecture - programming contents''' [=#point5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+[[br]]
+TitanNit is currently coded by a group of talented developers from the AAF digital Forums and is released for several different Receiver models and brands/reseller models.
+This section explains the architecture and programming information that titannit is engineered on and information of the dev team and its helpers in the present and in the past.
+Please select an item below for more information.
+{{{#!div style="width: 1100px; margin: auto"
+ {{{#!table style="border: none"
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Architecture-Programming/Architectures.png,align=left,link=[#point5.1])]]
+  }}}
+  '''([#point5.1 Architectures])'''[[br]]
+  {{{#!div style="float: left
+Information on the various supported archetures supported by TitanNit
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Architecture-Programming/Programming_Language.png,align=left,link=[#point5.2])]]
+  }}}
+  '''([#point5.2 Programming language])'''[[br]]
+  {{{#!div style="float: left
+Information on the underlying programming of TitanNit.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Architecture-Programming/Source_Control.png,align=left,link=[#point5.3])]]
+  }}}
+  '''([#point5.3 Source control])'''[[br]]
+  {{{#!div style="float: left
+Information on the source code and policies Of TitanNit.
+  }}}
+  }}}
+  |----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Architecture-Programming/The_Dev_Team.png,align=left,link=[#point5.4])]]
+  }}}
+  '''([#point5.4 The Dev Team])'''[[br]]
+  {{{#!div style="float: left
+Here you will find the[[BR]] members of the dev team.
+  }}}
+  }}}
+}}}
+}}}
+----
+'''5.1 Architecture''' [=#point5.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'''SH4'''
+TitanNit was first established on the SH4 (Super-H) chipset for the atemio and kathrin receivers.
+The Super-H (SH4) chipset is a biendian 32bit RISC Superscaler chipset, this chipset is aimed at increacing throughput by using called instruction-level parallelism within a single core.
+Originally developed for multimedia devices, gaming consoles and set top boxes and was used in the Sega's Dreamcast.
+it has prooved popular because of its low cost and high proformance, it has found use in many low power embedded devices.
+Titannit SH4 is a linux based and is based on ST micro electronics opensource linux project made for the Super-H chipset called ([http://stlinux.com/ STLinux]).
+The SH4 chipset has been popular with the satellite community because of the quality of the display output due to inclusion of a high class floating point math unit and high speed bus which is the key components used for drawing graphics, the open source nature of the linux system that runs on it, since its introduction it has had many third party firmwares developed for it from different development teams.
+TitanNit is Team AAF's sucessor to the AAF enigma 2 based firmware, aaf enigma is not currently developed and support has ended to futher develop TitanNit we reccomend that if current AAF Enigma users update to TitanNit for future support.
+'''Mips'''
+After the sucess with TitanNit on the SH4 chipset the developers then started development on the Mips chipset for use with the newly introduced Atemio 5000 series receivers.
+The Mips chipset (Microprocessor without Interlocked Pipeline Stages) is a biendian 32bit RISC chipset, this chipset is aimed at increacing throughput by using deep instruction piplines combined with single cycle instruction processing.
+Originally developed for the embedded market it has found use in consumer products gaming consoles and set top boxes and was used in the Nintendo 64 and three Sony Playstation products.
+The chipset has prooved popular in the STB market because of the inclusion in the Dreambox Recievers that has spawned clone and copy cat receivers, but it has a draw back that it lacks finness in the picture quality department over the SH4 based receivers as explained above, it has the advantage that it has a larger user base and therfore more plugins are available currently than the sh4 chipset based recievers.
+Titannit Mips is a linux based and is based on the open source project [https://github.com/oe-alliance oe-alliance].
+The Mips chipset has been popular with the satellite community because of open source nature of the dbox based firmwares since its introduction has had many third party firmwares developed for it from different development teams.
+'''Future Architectures'''
+There is a possibility that development may spread to other Receiver models and other architectures in the future such as the ARM architecture or PPC.
+Future development to support more Receivers is at the mercy of the developers and also the Hardware manufacturers who support the TitanNit project.
+[[br]]
+----
+'''5.2 Programming Language''' [=#point5.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+For performance reasons we have opted to use C programming language [http://en.wikipedia.org/wiki/C_(programming_language) wiki]
+In other DBox derived products such as the dream box and VU+ they have opted for a python layer to operate on top of the operating system.
+Python is a higher level scripting language used to define and setup elements in the gui and for an intrim language between the OS that is easily programmable.
+This was done so that users can easily develop and manipulate the system and integrate plugins skins etc... into the system but this has a performance hit on these system and can cause them to become slow and laggy and bloated but has the benifit of being easy for the community to develop for with out knowing much about the underlying system.
+The problem with this system has been that python has become so ingrained into the system and gui and often is now beyond the capibilities for the average user it was intended to used by not to mention it is a semi complicated language to learn to start with.
+TitanNit adresses these key conserns and has developed as much as possible br programming in C to increase the performance of the system but still alowing ease of intergration of plugins and skins using basic scripts.
+[[br]]
+----
+'''5.3 Source Control''' [=#point5.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+TitanNit is a semi closed source project and contains open source elements released as required by the licences of those projects.
+ * The basic Linux Image used in the SH4 project is the open source Project [https://gitorious.org/open-duckbox-project-sh4 open-duckbox-project-sh4]
+ * The basic Linux Image used in the Mips project is the open source Project [https://github.com/oe-alliance oe-alliance]
+ * TitanNit Source is nonpublic and is only partially freed[source:/titan TitanNit Public Source]
+ * The MediaCenter is from [http://ffmpeg.org ffmpeg] and the libeplayer3 is from [https://gitorious.org/open-duckbox-project sh4/tdt/source/tdt/cvs/apps/misc/tools/libeplayer3 libeplayer3]
+ * Busybox is a set of unix style tools combined into a single executable [http://www.busybox.net/]
+[[br]]
+----
+'''5.4 The Dev team''' [=#point5.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+The TitanNit project is proudly produced by the AAF Dev team and other loyal members and helpers.
+development is important aswell as the work they do to help out with such things as skin's, channel logo's and setups, translations, supplemental programs and tools, and plugins and this is a place for them to be recognized.
+''Note: currently this section is blank as I will leave it up to the developers and other loyal team members to place their mark''
+'''Founding DEV Team Members'''
+'''Dev Team Members'''
+'''Loyal Helpers'''
+'''Team Thanks'''
+ We would like to thank Atemio / Atevio who helped to fund the TitanNit project and has showed interst in this project from its beginnings until now.
+[[br]]

wiki/pages/nl/Atemio-Hotline

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.5 Atemio (hotline)''' [=#point3.7.5] ([wiki:Interface-Operation#point3.7 Information (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Atemio_Hotline.jpg)]][[BR]]
+>
+> here you can view contact info from atemio.
+[[br]]

wiki/pages/nl/Audio-Player

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.2.1 Audio Player''' [=#point3.2.1] ([wiki:Interface-Operation#point3.2 Media Center (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Audio_Player.jpg)]][[BR]]
+>
+> here you can play music.
+[[br]]
+----
+ '''Coloured Button's Functions'''
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Sorting)''' ||Set the sort method for the files listed in the file list display.||
+ ||'''Green Button: (Filelist-Mode)''' ||Switch between filelist mode and playlist mode.||
+ ||'''Yellow Button: (Random)''' ||select random play mode.||
+ ||'''Blue Button: (Repeat)''' ||Select Repeat play mode.||
+ ||'''Menu Button: (Menu)''' ||This will show an advanced settings menu for the media player see below for more info on the functions contained with in this menu.||
+----
+ '''Advanced Media Player Menu'''
+[[br]]
+ Audio:
+ ||'''Sort:''' ||Set the sort method for the files listed in the file list display.||
+ ||'''View:''' ||Switch between filelist mode and playlist mode.||
+ ||'''MediaDB Autoscan:''' ||Auto scan MediaDb in Background.||
+ ||'''Autostart Playlist:''' ||select the autostart Playlist.||
+ ||'''Default Directory:''' ||Set the default directory to display when the media player opens.||
+ ||'''Use Last Directory:''' ||open the last used directory when the media player opens.||
+ '''Coloured Button's Functions'''
+ ||'''Red Button: (Network)''' ||opens the network menu screen||
+ ||'''Green Button: (Edit)''' ||Edit Mode||
+ ||'''Yellow Button: (Screensaver)''' ||opens the screensaver menu||
+----

wiki/pages/nl/Audio-Video-Sat

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.18.2 Audio/ Video/ Sat''' [=#point3.5.18.2] ([wiki:Auto-Start-Settings#point3.5.18 Autostart Settings (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Autostart_Settings-Audio-Video-Sat.jpg)]][[br]]
+>
+Here you can check and adjust the video audio and satellite autostart settings.
+[[br]]
+ ||'''Bootlogo:''' ||show the boot logo on startup.||
+ ||'''Boot RGB Fix:''' ||apply the startup rgb display output mode.||
+ ||'''No Audio Sync:''' ||Don't wait for the audio buffer to fill before starting the audio stream.||
+ ||'''HighSR:''' ||??.||
+ ||'''Load stmdvb.ko with swts option''' ||???.||
+ ||'''Load stmdvb.ko with Camrouting option''' ||???.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.

wiki/pages/nl/Auto-Start-Settings

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.6.18 Autostart Settings''' [=#point3.6.18] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Autostart_Settings.jpg)]][[BR]]
+>
+>here you can change the startup settings.
+please select a menu item for more information
+[[br]]
+ * ([wiki:Default-Autostart#point3.6.18.1 Default Autostart])
+ * ([wiki:Audio-Video-Sat#point3.6.18.2 Audio/Video/Sat])
+ * ([wiki:USB-Device#point3.6.18.3 USB Device])
+ * ([wiki:Autostart-Network#point3.6.18.4 Network])
+ * ([wiki:Child-Safety#point3.6.18.5 Child Safety])
+[[br]]

wiki/pages/nl/Automatic-Search

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.2.1 Automatic Search''' [=#point3.5.2.1] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Automatic-Search.jpg)]][[br]]
+>
+Here you can proform an automatic channel scan.
+[[br]]
+ ||'''Type of Scan''' ||The type of scan in progress (Automatic).||
+ ||'''Scan:''' ||???.||
+ ||'''Clear Before Scan:''' ||Select to clear channel data before scan.||
+ ||'''Only Free to Air Services:''' ||During scan ignore pay tv services.||
+ ||'''Blindscan:''' ||Scan for unknown satellite transponders.||
+ ||'''Update channel Name''' ||If upon a rescan the channel name changes update the channel name in TitanNit.||
+ ||'''Entrys in Favourites'''  ||if scaned channels are found in current favourites list what should be done.||
+ ||'''Remove Empty Favourites''' ||Remove favourites list if they have no channels in them.||
+ ||'''Remove Unused Channels From Favourites'''  ||Remove channels from favourites that have ceased transmission.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+ '''Coloured Button's Functions'''
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.
+  Please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Start scan)''' ||Start channel Scan with the selected settings.||
+----
+ '''After Scan Menu'''
+----
+[[br]]
+The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options after the scan hac sompleted menu.
+  Please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Save)''' ||Select a channel you wish to save and select the green button to save it in to the channel listing.||
+ ||'''Green Button: (Save All)''' ||Store all channels in the channel listing.||

wiki/pages/nl/Autostart-Network

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+ === Autostart Settings ===
+'''3.6.18.4 Network''' [=#point3.6.18.4] ([wiki:Auto-Start-Settings#point3.6.18 Autostart Settings (Back)]) ([wiki:Wiki#point0.2 Contents]) ([WikiStart#point0 Main page])
+----
+[[Image(source:/wiki/Wiki-Pictures/DE/Autostart_Settings-network.jpg)]][[br]]
+Here you can check and adjust autostart network settings.
+[[br]]
+ ||'''NFS Server:''' ||enable the NFS Server on startup. ||
+ ||'''Samba Server:''' ||Enable the Samba server on startup. ||
+ ||'''Scan WLAN:''' ||scan for Wireless lan connections on startup. ||
+ ||'''ntpdate:''' ||Alow update of the date server . ||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]

wiki/pages/nl/Backup

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.8 Backup''' [=#point3.5.8] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/system_backup.jpg)]][[br]]
+>
+Here you can run a manual backup to /tmp or /var/backup if there is insufficent free space you can use a usb device.
+please ensure these folders are installed on the device for the Backup to operate.
+[[br]]
+To Exit from the backup menu press __"Exit"__.
+[[br]]
+----
+ '''Coloured Button's Functions"
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (backup)''' ||This will Start the backup process please follow the onscreen propmps.||
+[[BR]]

wiki/pages/nl/Blind-Scan-Settings

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.1.6 Blind Scan Settings''' [=#point3.5.1.6] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Blind-Scan-Settings.jpg)]][[br]]
+>
+Here you can proform a blind scan.
+[[br]]
+ ||'''Tuner type''' ||Select the recption tuner type.||
+ ||'''Minimal Frequency:''' ||Set the mimimum frequency to scan for during blind scan.||
+ ||'''Maximum Frequency:''' ||Set the maximum frequency to scan for during blind scan.||
+ ||'''Step Frequency:''' ||Set the step size of the frequency in mhz from the start frequency to scan.||
+ ||'''Minimal Signalrate:''' ||Set the minimum Signal rate to scan for during blind scan.||
+ ||'''Maximum Signalrate''' ||Set the Maximum Signal rate to scan for during blind scan.||
+ ||'''Step Signalrate'''  ||Set the brightness of the led when the system is in standby.||
+ ||'''Use only standard forward error correction (FEC)''' ||???.||
+ ||'''DVB-S Services Only:''' ||Scan only for SD channels.||
+ ||'''Only Default FEC:''' ||???.||
+ ''note: not all these options are relavant or shown and it depend's on the selected tuner type''
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.

wiki/pages/nl/Blue-Button

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.6.5 Blue Button''' [=#point3.6.5] ([wiki:Interface-Operation#point3.60 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Blue_Button.jpg)]][[BR]]
+>
+>here you can configure what happens with the press of the blue button
+[[br]]

wiki/pages/nl/CPU

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.8.6.1 CPU''' [=#point3.7.8.6.1] ([wiki:System-Infos#point3.7.8.6 System Infos (Back])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/CPU.jpg)]][[br]]
+>
+Here you can view the detailed cpu info.
+[[br]]
+[[br]]

wiki/pages/nl/Change-Feed

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.4.2 Change Feed''' [=#point3.4.2] ([wiki:Interface-Operation#point3.4 Extentions (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Change_Feed.jpg)]][[BR]]
+>
+>here you can sett up an aditional feed to obtain extra plugins not found in the online library
+[[br]]

wiki/pages/nl/Channel-Edit

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.6.15 Channel Edit''' [=#point3.6.15] ([wiki:Interface-Operation#point3.6 Settings (Back)])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Channel_Edit.jpg)]][[BR]]
+>
+>here you can edit your channel data
+[[br]]
+ ||'''Copy Service:''' ||Enable channel copy mode, this enables the user to copy channels to another boquet.||
+ ||'''Remove Service:''' ||Enable channel remove mode, this enables the user to remove channels from the currently selected boquet.||
+ ||'''Move Service:''' ||Enable channel move mode, this enables the user to move channels to another boquet.||
+ ||'''Protect Service:''' ||Enable channel protect mode, this enables the user to pin protect seletcted channels in the currently selected boquet.||
+ ||'''Rename Service:''' ||Enable channel rename mode, this enables the user to copy channels to another boquet.||
+ ||'''Sort Service:''' || selecting this will sort all channels in all boquets by alphebitac order.||
+ ||'''Set Start Channel:''' ||Here you can set the channel you wish for the receiver to show on startup.||
+ ||'''Delete Start Channel:''' ||Here you can remove the currently selected startup channel that shows on startup.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.

wiki/pages/nl/Channel-Service

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.1 Channel Service''' [=#point3.5.1] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/system-Channel_Service.jpg)]][[BR]]
+>
+Here you can setup your tuner and proform a channel scan.
+please select a menu item for more information
+[[br]]
+ * ([wiki:Tuner-Configuration#point3.5.1.1 Tuner configuration])
+ * ([wiki:Automatic-Search#point3.5.1.2 Automatic Search])
+ * ([wiki:Manual-Search#point3.5.1.3 Manual Search])
+ * ([wiki:Rotor-Settings#point3.5.1.4 Rotor Settings])
+ * ([wiki:Sat-Finder#point3.5.1.5 Sat Finder])
+ * ([wiki:Blind-Scan-Settings#point3.5.1.6 Blind Scan Settings])
+ * ([wiki:Create-Transponder-List#point3.5.1.7 Create Transponder List])
+ * ([wiki:Create-Default-Favorites#point3.5.1.8 Create Default Favorites])
+[[br]]

wiki/pages/nl/Child-Protection

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.6.12 Child Protection''' [=#point3.6.12] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Child_Protection.jpg)]][[BR]]
+>
+> here you can setup your key lock and child portection settings.
+[[br]]
+ ||'''Pin Code Menu''' ||Select the pin code used in the menu.||
+ ||'''Pin Code Channel:''' || select the pin code used to lock TV Channels.||
+ ||'''Protect Channels:''' || Do you wish to enable the locking of protected channels.||
+ ||'''Age Protect:''' || do you wish to protect channels based on age restrictions.||
+ ||'''Protect Channel Freetime (min''' || After a specific time do you wish to re-enable the lock  on protected channels if it is currently beign displayed.||
+ ||'''Protect menu:''' || Do you wish to place a lock on the menu of the reciever.||
+ To __"Store"__ the settings Exit from the Child Protection Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]
+----
+ '''Coloured Button's Functions"
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the cchild protection settings menu
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Menu Protect)''' ||pressing this button will bring up a list of menu items that a lock may be placed on to limit access to those areas, below is a list of all the menu items displayed in this menu.||
+ * Soft Cam Pannel
+ * Records and EPG
+ * Media Center
+ * Media Player
+ * Extentions
+ * System
+ * Settigs
+ * Information
+ * Standby/ Poweroff
+ * Main Menu
+ * Media Center
+ * GUI Restart
+ * Power Off
+ * Network Restart
+ * A/V Settings
+ * Adjust
+ * Skin
+ * Plugins
+ * Records
+ * EPG Search
+ * Common Interface
+ * Smart Card Reader
+ * Flash Update Online
+ * Child Protection
+ * Service
+ * Sat Finder
+ * Epg Short View
+ * Single Epg
+ * Multi Epg
+ * Graphic Epg
+ * EPG Search
+ * Records
+ * Plugins
+ * Change Feed
+ * TPK Upgrade (Online)
+ * TPK Install (Online)
+ * TPK Tmp (tmp)
+ * TPK Media (media)
+ * TPK (remove
+ * Channel Service...
+ * Common Interface
+ * Smart Card Reader
+ * Network
+ * Harddisk
+ * VFDisplay
+ * Fancontrol
+ * System Update
+ * Backup
+ * Settings Backup Restore
+ * Receiver Unlock
+ * A/V Settings
+ * Language
+ * Timezone
+ * Red Button
+ * Blue Button
+ * Plugin Button
+ * Adjust
+ * Skin Adjust
+ * Screensaver adjust
+ * Timeshift Settings
+ * Record Path
+ * EPG Settings
+ * Child Protection
+ * Restore Default Settings
+ * Video Settings
+ * Channel Edit
+ * MediaDB Settings
+ * Autostart Settings
+ * Overclocking Settings
+ * Save Settings
+ * Service
+ * Newsletter
+ * About
+ * Streaming
+ * Atemio (hotline)
+ * Titan Changelog
+ * GIT Changelog
+ * System Info
+ * Log
+ * System_Status
+ * Free Space
+ * kernel
+ * Mounts
+ * Network
+ * Ram
+ * System Infos
+ * Cpu
+ * Memory
+ * MTD
+ * Module
+ * Devices
+ * Swap
+ * Top
+ * Prozesslist
+ * USB
+ * Flashupdate (online)
+ * Flashupdate (tmp)
+ * USBupdate (online)
+ * USBupdate (tmp)
+ * Power off
+ * Standby
+ * Restart
+ * GUI Restart
+ * Power Off Timer
+ * Tuner Configuration
+ * Automatic Search
+ * Manual Search
+ * Manual Search Cable
+ * Manual Search Terrestrial
+ * Rotor Settings
+ * Sat Config
+ * Sat Finder
+ * Blind scan settings
+ * Formatt HDD
+ * Filesystem Check
+ * Configure
+ * Time to Sleep
+ * Adapter Settings
+ * WLAN Settings

wiki/pages/nl/Child-Safety

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.18.5 Child Safety''' [=#point3.5.18.5] ([wiki:Auto-Start-Settings#point3.5.18 Autostart Settings (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Autostart_Settings-child_safety.jpg)]][[br]]
+>
+Here you can adjust the lock settings on startup.
+[[br]]
+ ||'''Parental:''' ||Enable lock on startup.||
+ ||'''Pin:''' ||Select the pin number for the lock on startup.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]

wiki/pages/nl/Common-Interface

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.2 Common Interface''' [=#point3.5.2] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/system-Common_Interface.jpg)]][[BR]]
+>
+>here you can set up your installed cam devices.
+[[br]]
+ Picture:
+ ||'''Module Type:''' ||Set the module service type (multiple/ Single Service).||
+  To __"Store"__ the settings Exit from the Common Interface Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]
+----
+ '''Coloured Button's Functions"
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the Commom Interface menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Reset)''' ||This will reset the selected Common Interface Module.||
+ ||'''Green Button: (Menu)''' ||This will Bring up the advanced Common Interface menu.||
+ ||'''Yellow Button: (CAID)''' ||???.||
+ ||'''Blue Button: (Channel)''' ||Select the channels the selected CA Module will Decode.||
+ ||'''Menu Button: (Setting)''' ||This will show the settings for the selected CA Module.||

wiki/pages/nl/Community

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''14 Community''' [=#point14] ([wiki:English-Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+[[br]]
+The TitanNit project is supported 24 hours in the public forum.
+For help and support feel free to join us on our forum
+||= '''[http://www.aaf-digital.info/forum/forum.php AAF Digital Forum]''' =||
+||= [[Image(http://www.aaf-digital.info/images/logo.jpg,400,link=http://www.aaf-digital.info/forum/forum.php)]] =||
+[[br]]

wiki/pages/nl/Configure

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.5.3 Hard Disk Configure''' [=#point3.5.5.3]  ([wiki:Hard-Disk#point3.5.5 hard disk (Back)])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Configure.jpg)]][[br]]
+>
+Here you can configure your harddisk see below for more information.
+Note that you must enable ([wiki:Adjust#point3.6.7 Expertmode]) to show all available configure options in this display.
+[[br]]
+[[br]]
+ ||'''Use as recordings-device''' ||Prepair the storage device for use as a recording medium.||
+ ||'''Remove recordings-device''' ||disable the use of the storage device as a recording medium.||
+ ||'''Use as plugins-device''' ||Prepair the storage device for use as a plugins medium.||
+ ||'''Remove extentions-device''' ||disable the use of the storage device as a extentions medium.||
+ ||'''Use as swap-device''' ||Prepair the storage device for use as a swap medium.||
+ ||'''Remove swap-device''' ||disable the use of the storage device as a swap medium.||
+ ||'''Use as backup-device''' ||Prepair the storage device for use as a backup medium.||
+ ||'''Remove backup-device''' ||disable the use of the storage device as a backup medium.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]

wiki/pages/nl/Contact

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''15 Contact''' [=#point15] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+Interested External Developers or testers can feel free to chat with us via Skype.
+  • Skype Chat: "TitanNit Dev Chat"
+  • Skype Contact: obiwan1976
+[[br]]
+[[br]]

wiki/pages/nl/Create-Default-Favorites

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.1.8 Create Default Favorites[=#point3.5.1.8] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Create-Default-Favorites.jpg)]][[br]]
+>
+By selecting this option it will setup the default german favourites lists.
+Please note that selecting this button will remove all the user pre programmed in favourites.
+in future it may be able to set up favourite lists from the satellites/ providers programed into the tuner.
+ To __"Store"__ the settings by pressing __"OK"__ or press __"Exit"__ to cancel changes.

wiki/pages/nl/Create-Transponder-List

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.1.7 Create Transponder List''' [=#point3.5.1.7] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Create-Transponder-List.jpg)]][[br]]
+>
+Here you can automatically set up transponders for various services from the TitanNit online repo this will save you from having to manually create these lists from your pc or from a satellite xml generator, this will greatly simpifly channel and tuner setup.
+please note that these lists may be out dated and not contain a complete list of transponders for every service.
+[[br]]
+ ||'''Create Transponder (Sat) ''' ||Downloads a list of current transponders from the online repo for all available satellites services. ||
+ ||'''Create Transponder (Cable) ''' ||Downloads a list of current transponders from the online repo for all available cable services. ||
+ ||'''Create Transponder (Terrestrial) ''' ||Downloads a list of current transponders from the online repo for all available Terrestrial services. ||
+ ||'''Create Transponder (All) ''' ||Downloads a list of current transponders from the online repo for all available services. ||
+Please note that selecting one of the above options will remove all the transponders from the current channel data and may remove any custom satellite configs and tuner settings.
+in future it may merge the current programmed in user assigned transponders.
+A rescan will need to be preformed after preforming an option be sure to make a backup before proforming this action to be safe.
+ To __"Store"__ the settings by pressing __"OK"__ or press __"Exit"__ to cancel changes.

wiki/pages/nl/DYNDNS-Settings

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.4.7 DYNDNS Settings''' [=#point3.5.4.7] ([wiki:Network#point3.5.4 network (Back])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/DYNDNS-Settings.jpg)]][[br]]
+>
+Here you can setup your DYNDNS interface.
+[[br]]
+ ||'''Start on Boot:''' ||Start the DYNDNS server on startup.||
+ ||'''User:''' ||setup the username for DYNDNS.||
+ ||'''Password:''' ||Set the password for DYNDNS.||
+ ||'''DNS NAME:''' ||set the dns name.||
+ ||'''DNS Syatem:''' ||???.||
+ To __"Store"__ the settings Exit from the Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]
+----
+ '''Coloured Button's Functions"
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Text Button: (Keyboard)''' ||This will will bring up editor to edit a value or text string.||
+ ||'''Green Button: (Start)''' ||Start the DYNDNS server.||
+ ||'''Yellow Button: (Stop)''' ||Stop the DYNDNS server.|| ||

wiki/pages/nl/Default-Autostart

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.18.1 Default Autostart''' [=#point3.5.18.1] ([wiki:Auto-Start-Settings#point3.5.18 Autostart Settings (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/DE/Autostart_Settings-default_Autostart.jpg)]][[br]]
+>
+Here you can check and adjust the startup settings.
+[[br]]
+ ||'''Bootstop:''' ||???.||
+ ||'''Debug:''' ||Here you can set the debug mode and adjust the complexicity of the log output.||
+ ||'''Show IP:''' ||Scan for a Media Highway version 2 EPG stream during  EPG scan.||
+ ||'''Updatelist:''' ||??.||
+ To __"Store"__ the settings Exit from this Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.

wiki/pages/nl/Development

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''11 Development''' [=#point11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+=== Plugins Building ===
+'''Preparation'''
+In the current tdt git http://gitorious.org/open-duckbox-project-sh4 you can now build TitanNit plugins.
+I have installed 2 plugins that are intended to serve as an example. One can then download and unzip this locally and build your own plugins.
+With a fresh clone of the git
+{{{
+make yaud-enigma2-nightly
+}}}
+after it completes, then
+{{{
+make titanium-plugins
+}}}
+[[br]]

wiki/pages/nl/Devices

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.8.6.5 Devices''' [=#point3.7.8.6.5] ([wiki:System-Infos#point3.7.8.6 System Infos (Back])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Devices.jpg)]][[br]]
+>
+Here you can view the detailed loaded devices info.
+[[br]]
+[[br]]

wiki/pages/nl/Disclaimer

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''17 Generic Disclaimer''' [=#point17] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+TitanNit is a Semi closed source setop box linux based operating system software. The services provided by AAF Digital including (including developer tools, resources, download areas, files, source code, product information, documentation, communication forums, bug tracker, wiki, internet, streaming, forum etc. all collectively called "services") that the TitanNit Project, its members, and websites provide are for the purpose of providing support to the community and aditional functionality from the original system software provided by the manufactures of the supported hardware.
+The services provided bt the AAF digital team is provided “as is”, "with all faults", and "as available" basis, without warranty of any kind, either express or implied. Your use of these services is at your own risk. TitanNit disclaims all warranties.
+TitanNit disclaims liability for any direct, indirect, incidental, special, consequential, exemplary, punitive or other damages, or lost profits, that may result directly or indirectly from the use of these services and any material that is downloaded or obtained through the use of these services.
+This includes, without limitation, any damage to computer systems, hardware or software, loss of data, or any other performance failures, any errors, bugs, viruses or other defects that result from, or are associated with the use of these services.
+None of the contributors, sponsors, administrators, or anyone else connected with TitanNit in any way whatsoever can be responsible for the appearance of any inaccurate or libelous information or for your use of the information contained in or linked from these services.
+AAF Digital reserve the right to to remove and add services as they see fit without warning.
+'''No contract, limited license'''
+Please make sure that you understand that these services is being provided freely, and that no kind of agreement or contract is implied between the owners or users of these services, the owners of the servers upon which it is housed, the individual contributors to these services, any project administrators, sysops or anyone else who is in any way connected with the project subject to your claims against them directly. You are being granted a limited license to copy or install anything from this site; it does not create or imply any contractual or extracontractual liability on any of it's agents, members, organizers or other users. Neither is anyone responsible should someone change, edit, modify or remove any information contained with in these services.
+'''Trademarks'''
+Any of the trademarks, service marks, collective marks, design rights or similar rights that are mentioned, used or cited in the services provided for TitanNit are the property of their respective owners. Their use in any "service" does not imply that you may use them for any other purpose other than for the same or a similar use as contemplated by the original authors concent.
+the AAF Digital team will make due effort to outline the services that are provided by other's and give them credit where aplicable.
+'''Information and Content'''
+Publication of information found in any of the services provided for TitanNit may be in violation of the laws of the country or jurisdiction from where you are viewing this information. The servers providing these services are located in different locations of the world and is maintained in reference to the protections afforded under local and federal law in respect to their location. Laws in your country or jurisdiction may not protect or allow the same kinds of speech or distribution. the AAF digital team does not encourage the violation of any laws; and cannot be responsible for any violations of such laws, should you link to the domain of the websites of these services or use, reproduce, or republish the information contained therein.
+'''Final Remarks'''
+Enjoy TitanNit and the other services provided by AAF Digital and thanks for selecting us!

wiki/pages/nl/EPG-Search

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.1.4 EPG Search''' [=#point3.1.4] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Epg_Search.jpg)]][[BR]]
+>
+EPG Search is where you can search the EPG title, discription genra for specific keywords to search for programs to set up Recordings.
+[[br]]
+ '''Coloured and Extra Button's Functions"
+ The __"Coloured and Extra Buttons"__ along the bottom of the display bring up additional menus and options with in the Search EPG menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Timer)''' ||This will bring up the recording timer menu to set up a timer.||
+ ||'''Green Button: (Title)''' ||This will search the EPG title string for text you specify and bring up a list of matches where you may press the red button to set up a timer.||
+ ||'''Yellow Button: (Discription)''' ||This will search the EPG Discription string for text you specify and bring up a list of matches where you may press the red button to set up a timer.||
+ ||'''Blue Button: (All)''' ||This will search all EPG string for text you specify and bring up a list of matches where you may press the red button to set up a timer.||
+ ||'''Menu (Genre):''' ||This will search the EPG Genre string for text you specify and bring up a list of matches where you may press the red button to set up a timer.||
+For information on setting up a timer Recording using the red button see ([WikiStart#point103.10.6 Records]) for more info.

wiki/pages/nl/EPG-Settings

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.6.11 EPG Settings''' [=#point3.6.11] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/EPG_Settings.jpg)]][[BR]]
+>
+>Here you can change your epg settings.
+[[br]]
+ ||'''EPG Path''' ||Set to any Path you want where the EPG File should be stored (on Receivers with little Memory it is strongly recommended to extend it by using a USB Pen-Drive or Harddisk)||
+ ||'''How Many Days:''' ||The Number of Days in Advance of the EPG to store (I recommend no higher than 8 Days)||
+ ||'''Delete EPG after read:''' ||Do you want the EPG file to be deleted after being read.||
+ ||'''EPG Save Mode:''' ||When should the EPG Data be stored to the storage medium. Caution: Should you not use a Pen Drive or Harddisk for EPG Storage set to Never, as Receivers with little Memory on Board tend to crash due to Insufficient free space.||
+ ||'''Show EPG Screen (EPG Button):''' ||Which EPG format should be shown on EPG Key-press on the Remote.||
+ ||'''EPG Free Space (kb):''' ||Total of minimal Free Memory that should be kept on the medium where the epg is stored to aviod free space errors.||
+ ||'''EPG List Mode:''' ||What Channels should be scanned in the background (Only for twin Receivers) for EPG (scan)(whitelist) (scanlist and whitelist) (deactivate (disable scan)).||
+ ||'''EPG Scan Time:''' ||Here you can set the time of the automatic EPG scan. The Scan will be performed every Day at that set time. Should the Receiver be in Deep Stand-by it will "wake up" aprox. 5 Minutes before the scan is due to start.||
+ ||'''EPG Button in EPG:''' ||Behavior of the EPG Button during EPG display.||
+ ||'''Grafic EPG Zoom:''' ||Sets the zoom level of the EPG to show more or less of a time span of the shown programs.||
+ ||'''Grafic EPG Picons:''' ||Set to yes to use picons or the alternative Picon sets in the infobar and EPG stored in /var/media/autofs/sda1/swapextensions/usr/local/share/titan/picons/ directory.||
+ ||'''Delete EPG Before Scan:''' ||Should the EPG be deleted before a the timed scan.||
+ ||'''After EPG Scan:''' ||Behavior after the EPG scan is completed EPG scan: Nothing (Stand-By) or Switch Off (Deep Stand-By).||
+ ||'''MHW EPG:''' ||Scan for a Media Highway EPG stream during EPG scan.||
+ ||'''MHW2 EPG:''' ||Scan for a Media Highway version 2 EPG stream during  EPG scan.||
+ ||'''OpenTV EPG:''' ||Scan for an OpenTV EPG stream during EPG scan.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]
+----
+ '''Coloured Button's Functions"
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (EPG Reset)''' ||This will reset the saved epg removing all program data.||
+ ||'''Green Button: (Edit)''' ||On a customisable item this will bring up editor to edit a value or text string.||
+ ||'''Yellow Button: (Scanlist)''' ||Brings up the epg scan list and you may from there add aditional boquets to be scaned during an epg scan.||
+ ||'''Blue Button: (log)''' ||This will show you the past scan log history for the epg.||

wiki/pages/nl/EPG-Short-View

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.1.1 EPG Short View''' [=#point3.1.1] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/EPG_Short_View.jpg)]][[BR]]
+>
+EPG Short View is a small easy to read horozontal epg of the current displayed channel including the infomation on the program you may scroll using the direction arrows to a future time.
+[[br]]

wiki/pages/nl/External-Software

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''9 External Software''' [=#point9] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+External Software is a collection of tools to supplement TitanNit.
+This is a list of applications that can be use with or for to manipulate or control your Receiver.
+[[br]]
+Below is a list of external applications please select a link below for more information.
+{{{#!div style="width: 1100px; margin: auto"
+ {{{#!table style="border: none"
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/TiMote.png,align=left,link=[wiki:External-Software-TiMote#point9.1 9.1 TiMote (Android)])]]
+  }}}
+  '''[wiki:External-Software-TiMote#point9.1 9.1 TiMote (Android)]'''[[br]]
+  {{{#!div style="float: left
+Timote is an andriod application for streaming and control of TitanNit
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/TiView.png,align=left,link=[wiki:External-Software-TiView#point9.2 9.2 TiView (PC)])]]
+  }}}
+  '''[wiki:External-Software-TiView#point9.2 9.2 TiView (PC)]'''[[br]]
+  {{{#!div style="float: left
+TiView is an PC application for streaming and control of TitanNit
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/SatChannelListEditor.png,align=left,link=[wiki:External-Software-SatChannelListEditor#point9.3 9.3 SatChannelListEditor])]]
+  }}}
+  '''[wiki:External-Software-SatChannelListEditor#point9.3 9.3 SatChannelListEditor]'''[[br]]
+  {{{#!div style="float: left
+SatChannelListEditor is an PC application for manipulation of your TitanNit channel data.
+  }}}
+  }}}
+  |----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/E2WebIFAPI.png,align=left,link=[wiki:External-Software-E2WebIfAPI#point9.4 9.4 E2WebIfAPI])]]
+  }}}
+  '''[wiki:External-Software-E2WebIfAPI#point9.4 9.4 E2WebIfAPI]'''[[br]]
+  {{{#!div style="float: left
+E2WebIfAPI is an console application to support the dreambox xml web interface commands.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/TitanEditor.png,align=left,link=[wiki:External-Software-TitanEditor#point9.5 9.5 TitanEditor])]]
+  }}}
+  '''[wiki:External-Software-TitanEditor#point9.5 9.5 TitanEditor]'''[[br]]
+  {{{#!div style="float: left
+TitanEditor is an PC application for manipulation of dreambox channel data to work on of your TitanNit Receiver.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/TitanNitLanguageEditor.png,align=left,link=[wiki:External-Software-TitanNitLanguageEditor#point9.6 9.6 TitanNitLanguageEditor])]]
+  }}}
+  '''[wiki:External-Software-TitanNitLanguageEditor#point9.6 9.6 TitanNitLanguageEditor]'''[[br]]
+  {{{#!div style="float: left
+TitanLanguageEditor is an PC application for editing GUI language translations.
+  }}}
+  }}}
+}}}
+}}}

wiki/pages/nl/External-Software-E2WebIfAPI

-                      r39056
+                      r39063
+[[TranslatedPages]]
+'''9.4 E2WebIfAPI''' [=#point9.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+== Introduction ==
+Enigma2 Web Interface ( WebIf ) API was defined for Dreambox .
+It is a protocol that allows you to control a Dreambox via HTTP requests.
+Typical control tasks are :
+* Programming (timer) and playing back recordings
+* Live streaming (TV and radio)
+* EPG functions (display, search)
+* Remote control (Remote Control)
+You can find a good overview of the E2WebIFAPI in the [http://dream.reichholf.net/wiki/Enigma2:WebInterface DreamboxWIKI].
+== Motivation ==
+For TitanNit the Android App [wiki:External-Software-TiMote#point109.1 9.1 TiMote] was developed. Anybody with an Android Smart-Phone or Tablet with this software installed can control their receiver or watch TV on the Android device. Isn't that cool?
+But owners of an iOS-device (i-Phone or i-Pad) are unlucky as there is no iOS TitanNit compatable web client such as TiMote. You can control your receiver via http protocol (same as Web Interface) but you wont be able to use all advantages like tiMote on an Android Platform.
+On the other hand iOS and Android Apps already exist for Dreambox receivers. These Apps are based on the Enigma2 protocol. Couldn't one just use that App on iOS instead of developing a new App?
+== The solution ==
+TitanNit has its own protocol but is not compatible to the Enigma2 WebIf. Following a short analysis it was discovered that converting E2 requests to Titan didn't seem so difficult. Therefore, an E2 web server (e2webserv) was developed, which implements the Enigma2 WebIf. This server receives the E2 requests, delegates the calls to TitanNit web server and the responses is converted back into the XML format, which is expected from the E2 client.
+This way the TitanNit receiver is able to correspond to existing E2 - client software.
+== Requirements ==
+* The Web server must be enabled on the receiver
+* The E2webserv must be installed on the receiver
+== IOS Apps ==
+The following apps are installed on my iPad2:
+* dreaMote
+* DreaMote Lite
+* e2RemoteHD
+* Dreambox Live
+Should you not want to purchase any apps from the Apps-Store I can recommend dreaMote Lite .
+In addition to the app you need a player.
+I have tried the following players, which work well for me:
+* Good Player
+* BUZZ Player
+* OPlayerHD Lite
+* VLC Player
+VLC and OPlayerHD Lite are free.
+== XBMC ==
+If you are running the Media Center software [http://xbmc.org/ XBMC] or [http://xbmc4xbox.org.uk/ XBMC4XBOX], you can connect your Titan receiver via the Live-TV-Plugin VU+.
+XBMC runs on Windows PCs aswell as Linux and is also available for Raspberry Pi and the Xbox.
+== VLC ==
+Having installed the e2webserv you can enjoy Live-Streaming on your Windows or Linux PC using [http://www.videolan.org/vlc/ VLC] (no further software needed).
+You do not have to switch channels manually it all happens automatically. In order for this to take place you need an M3U playlist. You can easily generate the playlist by your Favourites and save to your PC. Having done so you only need to open the M3U list in VLC and select the desired channel.
+How do you export a particular favourites list into an M3U file?
+Enter the address in your Web browser.
+Example (favourite is "Polish"):
+[http://192.168.1.1:8080/web/services.m3u?bRef=Polish]
+Enter your receivers IP address and where names of Favourites have spaces within these spaces must be replaced with "%20".
+Example (favourite is "My TV" Receiver - IP: 192.168.0.10):
+[http://192.168.0.10:8080/web/services.m3u?bRef=Mein%20TV]
+Client Configuration == ==
+Please configure the E2-clientas accordingly:
+* IP address of the receiver
+* Port: 8080
+* Streaming Port: 8001
+Please note that SSL is not supported.
+Below you see an example configuration for dreaMote.
+[[Image(DreaMote.png,384px)]]
+== E2webserv.conf ==
+You must alter the server configuration manually. Using standard configured TitanNit no alterration on the e2webserv.conf should be neccessary.
+Should you have installed the plugin to Flash the configuration file '''e2webserv.conf''' lies in the directory '''/mnt/swapextensions/etc'''
+Here is the content:
+{{{
+# E2 web port
+port = 8080
+# E2 data port
+data port = 8001
+# Titan web port
+titanium- port = 80
+# Titan data port
+titan data port = 22222
+# Titan host (change it if e2webserv is not running locally on the receiver)
+titan host = 127.0.0.1
+# Automatic switching of channels
+# It is useful if you do not want manually switch a channel on receiver with a single tuner.
+# If it is set to false and you have a single tuner you can stream the only channels located
+# On the same transponder as the current channel active on the receiver .
+Autozap = true
+# Log output file
+logFile = /tmp/e2webserv.log
+# Maximum log file size in KB. Set it to 0 (default 10KB) to disable logging (maximum allowed value is 1024).
+# When the file limit is reached a backup of the current file is created .
+# It Means maximally 2 x MaxLogSize KB will be used.
+MaxLogSize = 10
+# Thread pool size (1 through 8)
+threadpool = 2
+# Directory where the transponder and bouquet files are located.
+# You do not need to Specify it, it will be Automatically Discovered .
+# But if you you start e2webserv not on the receiver (but eg on your Linux server or Windows computer) then you
+# Shoulderstand copy the settings (channel, transponder, provider and all bouquets file) and here Specify the location on the local computer .
+titanDir = /mnt/settings
+}}}
+== Links ==
+* Enigma2 Web API in [http://www.aaf-digital.info/forum/showthread.php?90948-Enigma2-Web-API-f % FCr - TitanNit AAF Forum]
+* Sources on [https://github.com/gswiatek/e2api4titan GitHub]
+[[br]]
+[[br]]

wiki/pages/nl/External-Software-SatChannelListEditor

-                      r39056
+                      r39063
+[[TranslatedPages]]
+'''9.3 SatChannelListEditor''' [=#point9.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+This manual applies to version 5.4 of SatChannelListEditor (SCLE). In future releases,[[br]]
+possibly new features will be added, making the screen shots of this program obsolete.
+== Requirements ==
+SCLE has been programmed for the runtime environment " Microsoft. NET Framework ".[[br]]
+Currently .NET Framework version 2.0 or higher is required.
+( also take a look at [http://en.wikipedia.org/wiki/.NET_Framework Wikipedia article . NET Framework] )
+== Windows ==
+* In  Windows XP .NET Framework version 2.0, 3.0 or 3.5 must be installed.[[br]]
+(3.0 and 3.5 are extended versions include version 2.0)
+* For Windows Vista and Windows 7 the .NET Framework librarys are implemented[[br]]
+in the operating system and do not need to be installed seperately.
+* In Windows 8 .NET Framework 3.5 must be installed. As Windows 8 by default,[[br]]
+only includes .NET framework 4.5, which is not compatible with SCLE
+== Linux ==
+In Linux, the Mono framework is required (see [http://en.wikipedia.org/wiki/Mono_(software)Wikipedia article about Mono project]) .
+[[BR]] You may have to install WinForms libraries manually with "apt -get install libmono- winforms * "
+[[BR]] You may then run SCLE from the command line with the command "mono SatChannelListEditor.exe ".
+== Mac OS ==
+In Mac OS , just like Linux, the Mono-Framework is required to to run SCLE.
+== The first startup ==
+After the first startup of SCLE the language is set to English and the receiver[[br]]
+model " UFS -821 " is selected. You now have to set the language and your[[br]]
+Receiver model to suite your receiver.
+Select the receiver and its System you like to manage.
+== Setting the receiver model and type of operating system ==
+Select the menu under " Options ", select " Settings" :
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/3.png)]]
+Select Titan in the window that appears as the receiver you wish to connect to:
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/4.png)]]
+After selecting the reciever type under the option " Titan " set the IP address of your Receiver, before[[br]]
+you close the window confirm the settings by clicking the OK button.[[br]]
+The other settings on this page should not be changed.
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/5.png)]]
+== Download and upload the channel list ==
+After the Receiver model and the IP address have been set, you can fetch the channel[[br]]
+list from your Receiver (Download) and after processing send it back to the Receiver (upload).
+[[BR]] Use the Buttons in the Menubar of SCLE or in the Drop-down Menu:
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/6.png)]]
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/7.png)]]
+When you start an upload or download the program will automatically change to[[br]]
+the message window where status messages are displayed for file transfer.
+== Edit the channel list ==
+== Favourites ==
+All TV and Radio channels are displayed in the tab "TV" and "Radio" in the main window[[br]]
+of SCLE. Normally there are several hundreds or thousands of channels in this list.
+[[BR]] To simplify navigation on your Receiver you may add the channels to more than one Favourites list.[[br]]
+The Favourites also determine the channel number for easier and direct access with your remote control.
+[[BR]] Create new favourites by clicking the right mouse button within the tree of favourites:
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/8.png)]]
+After creating the new Favourites entry assign the desired Name:
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/9.png)]]
+You may now add channels to your favourites by drag & drop of the channels[[br]]
+onto the Favourites entry or by clicking the right mouse button on the desired channel[[br]]
+and selecting Add to Favourites and selecting the Favourites Entry from the drop-down-menu:
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/10.png)]]
+Once a channel has been added to the favourites, a channel number is assigned.[[br]]
+The first channel in the first favourites is channel number 1:
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/11.png)]]
+When a channel is assigned to more than one favourites list, it additionally[[br]]
+obtains further channel numbers:
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/12.png)]]
+=== EPG favourite "EPG scan " ===
+For TV channels there is a special favourite called "EPG scan".[[br]]
+Copy all channels you want to be included for the timed EPG scan, all channels in this list[[br]]
+will have their epg automatically scaned.
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/13.png)]]
+=== Satellite ===
+Creating and Editing Satellite entrys
+Switch to the "Satellite" tab. After clicking the right mouse button the[[br]]
+drop-down-menu is displayed, where you can create a new Satellite or edit an existing one.[[br]]
+Double - clicking on an existing Satellite also opens this for editing.
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/14.png)]]
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/15.png)]]
+=== Creating and Editing Transponders ===
+Switch to the "Transponder" tab. After clicking the right mouse button the drop-down-menu[[br]]
+is displayed, where you can create a new Transponder or edit an existing one.[[br]]
+Double - clicking on an existing Transponder also opens this for editing.
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/16.png)]]
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/17.png)]]
+=== Creating and Editing Channels ===
+Switch to the tab "TV" or "Radio". After clicking the right mouse button the drop-down-menu[[br]]
+is displayed, where you can create a new channel or edit an existing one.[[br]]
+Double - clicking on an existing channel also opens this for editing.
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/18.png)]]
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/19.png)]]
+=== Using receiver profiles ===
+If you have more than one Receiver, it is advisable to work with profiles.[[br]]
+Go to the settings and enable the checkbox "Use Receiver Profiles":
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/20.png)]]
+Enter a name for the profile, and click the "Save" button.[[br]]
+The profile will be created with the current settings specified under the "Titan" tab.
+[[BR]] To create a profile for a second titan receiver, switch to the "Titan" tab,[[br]]
+enter the IP address of the second receiver, switch back to the "General" tab,[[br]]
+enter a new profile name and click on "Save" once again.
+When you close the settings window by clicking the -OK-button- You will now[[br]]
+discover the new selection menu where you may choose your Receiver profile.
+[[Image(source:/wiki/Wiki-Pictures/NL/SCLE/21.png)]]

wiki/pages/nl/External-Software-TiMote

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''9.1 TiMote''' [=#point9.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+[[br]]
+Timote is a universal remote control for Linux-based receivers.
+Currently (Atemio) TitanNit, Enigma2 and Neutrino are supported.
+please note that screen shots were taken from TiMote version xxx future versions of TiMote could make these screenshots invalid.
+Features:
+- Bouquets / Favorites
+- Show EPG
+- EPG search (*)
+- Show the current station
+- View recordings, stream and delete (*)
+- Create, edit and delete timer
+- Satfinder (*)
+- Power Control
+- Virtual Remote
+- News
+(*) Only Titannit/E2
+To stream an appropriate player, for example, MX Player, VPlayer or BSPlayer (lite) need to be installed.
+If the app crashes, please activate the "send error report automatically" in the Settings. you can
+thereby help improve the software and make troubleshooting easier crucial to the developer.
+Comments, questions, suggestions or requests? Write me an email or post a comment on the app homepage!
+appear
+[[br]]
+[[Image(http://www.android.com/images/brand/get_it_on_play_logo_large.png)]]
+[[br]]
+[https://play.google.com/store/apps/details?id=eu.azato.timote PlayStore]
+[[br]]
+When you open up Timote You are presented with the main interface along the top of the display the radio buttons are used as the menu of Timote [[br]]
+See below for more information.
+'''Main''' [[br]]
+[[Image(source:/wiki/Wiki-Pictures/NL/TiMote/Main.png)]]
+Main contains a list of the main functions of timote:
+||'''([wiki:External-Software-TiMote-TV#point0 TV]) ''' ||This will bring up a list of Boquets on the reciever).||
+||'''([wiki:External-Software-TiMote-On-air#point0 On-air]) ''' ||This will Bring up the information of the TV channel currently displaying on the Reciever||
+||'''([wiki:External-Software-TiMote-Movies#point0 Movies]) ''' ||This will bring up the Movielist's stored on the reciever).||
+||'''([wiki:External-Software-TiMote-Timer#point0 Timer]) ''' ||This will bring up a list of the current timer recordings on the reciever).||
+||'''([wiki:External-Software-TiMote-EPG-Search#point0 EPG-Search]) ''' ||This will bring up a a search page to search the EPG for a specific keyword).||
+[[br]]
+'''Misc''' [[br]]
+[[Image(source:/wiki/Wiki-Pictures/NL/TiMote/Misc.png)]]
+Misc contains a list of other functions of TiMote:
+||'''([wiki:External-Software-TiMote-Signal-Finder#point0 Signal-Finder]) ''' ||This will bring up the signal info's of the current displayed channel.||
+||'''([wiki:External-Software-TiMote-Screenshot#point9.1.1 Screenshot]) ''' ||This will take a screen shot of the TV Display||
+||'''([wiki:External-Software-TiMote-Remote#point9.1.2 Remote]) ''' ||This will bring up the on screen remote).||
+||'''([wiki:External-Software-TiMote-Message#point9.1.3 Message]) ''' ||This can be used to send messages to the TV display).||
+||'''([wiki:External-Software-TiMote-Power-Menu#point9.1.4 Power Menu]) ''' ||This will bring up the power control menu
+||'''([wiki:External-Software-TiMote-RGui#point9.1.5 RGui]) ''' ||This will start the RGui engine||
+||'''([wiki:External-Software-TiMote-LCD-Mode#point9.1.6 LCD Mode]) ''' ||???||
+||'''([wiki:External-Software-TiMote-Power-About#point09.1.7 Power About]) ''' ||This will bring up information on the developers of TiMote).||
+'''Profiles''' [[br]]
+[[Image(source:/wiki/Wiki-Pictures/NL/TiMote/Profile.png)]]
+Profiles is a list of receiver profiles with the ability to select and control multiple receivers.
+you may create a new profile using the add button at the top of the display.
+----
+Temp data to move to Individual pages
+[[Image(source:/wiki/Wiki-Pictures/NL/TiMote/Stream.png)]]
+[[Image(source:/wiki/Wiki-Pictures/NL/TiMote/Boquet.png)]]

wiki/pages/nl/External-Software-TiView

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''9.2 TiView''' [=#point9.2] ([wiki:English-Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+TiView is a Windows 32bit application, that will run on a Windows 32/64bit system.[[br]]
+The Tool uses the HTTP-RAW-Api of TitanNit.[[br]]
+[[br]]
+''Highlights of TiView''
+- *Output of the TV-Screen on your PC
+- *Watch recordings on your PC
+- *PiP function for 2 simultaneous TV-Stream or recording viewing on your PC
+- *Proxy function for external access from a remote TiView and streaming a recoded stream
+- Management of timers for recordings
+- Infobar with progress bar for the actual program
+- Picon-view in the Infobar(Enabled by adding the picons into the folder /picons in TiView)
+- Channel EPG
+- Multi EPG
+- Grafical Multi EPG
+- EPG Search
+- Overview of recordings
+- Manage profiles should one have more than one Receiver
+- Signal-Monitor
+- Send Messages to your Receiver
+- OSD-Screenshot
+'''*For Playback on your PC you need a compatable media player the 32bit version 2.x of VLC Player .'''[[br]]
+(Alternativly you can copy libvlc.dll, libvlccore.dll and the Plugins folder from VLC into the TiView folder)

wiki/pages/nl/External-Software-TitanEditor

-                      r39056
+                      r39063
+[[TranslatedPages]]
+'''9.5 TitanEditor''' [=#point19.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+Titan editor is a simple channel list editor that is able to convert enigma channel data to be able to operate[[br]]
+on a titan based receiver. It is also able to convert the filename from enigma 2 picons to the titan format.
+This software is still beta status but the basic functions are working, there has been posts noted on the AAF Forum that[[br]]
+converting picons in some instances comit an unhandled exception error causing the program to exit.
+- convert E2 channel list's incl. bouquets (this will not work 100% for some channels)
+ - edit/delete and add Titan channels
+ - convert E2 picons to Titan picons
+ - manage bouquets
+The current version of TitanEditor is version 0.15 and it may be downloaded from here [http://www.aaf-digital.info/forum/showthread.php?78014-TitanEditor-V0-15&p=802005&viewfull=1#post802005 titanEditor]

wiki/pages/nl/External-Software-TitanMote

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''9.1 TitanMote''' [=#point9.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+[[br]]
+Titanmote is a universal remote control for Linux-based receivers.
+Currently there is a little information we can provide reguarding this from the developer jagabongo.
+''Words from the developer:''
+----
+I'm currently working on an iOS app for TitanNit . For this I would need a few beta testers .
+The app will cost money later when development is finished and will be able to be purchased from the store, I will not releace it free because I have specially bought for this purpose a developer account and will take many hours of development, I also do not want the app to feature advertising.
+requirements:
+ - IPhone or iPad with iOS > = 7.0
+ - A bit of technical understanding
+ - Lust for testing
+A few recent screenshots :
+ https://www.dropbox.com/sh/armi0c3q72i350h/vm3szZDzvK
+So in Version 1 I should be able to:
+ - Browse by bouquets / channel lists + See Epg info and switch Channels.
+ - Add timers on an event with the epg data.
+ - List all timer
+ - Delete Timer
+ - easy remote copy with touch buttons
+ - 2 profiles
+ - Everywhere pull to refresh .
+ - [ EDIT] Forgot , it will be multilingual or , DE, FR, IT and rest English. But languages are all relatively retrofitted without hazzle
+Future features:
+ - User: Password WebIf Auth . ( hopefully not often used)
+ - Https support. ( Was I already am going to test with self-signed stuff but totally in the pants ... )
+ - The stream to an iOS device is just not as easy as on Android that is why they first moved to the rear.
+BETA testing runs like this:
+ * 1 You send with your UUID ( google iOS Device UUID to find out )
+ * 2 Your you created an account at https://build.phonegap.com ( Free is sufficient).
+ * 3 You share me with your UUID and email phonegap.build accounts.
+When that's done you can you log on your mobile Safari in build.phonegap.com and always install it there through the browser to the latest build. (OTA Installation).
+This is perfectly legal and possible even without jailbreak.
+if you are intreseed in becomming a better tester please leave a message in the [[http://www.aaf-digital.info/forum/showthread.php?100699-iOS-TitanNit-iOS-App-!-titanMote-!-Tester-gesucht!&p=974748#post974748 | forum]].

wiki/pages/nl/External-Software-TitanNitLanguageEditor

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''9.6 TitanNit Language Editor''' [=#point9.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+The TitanNit Language Editor tool is used to provide translations files for devs to implement translations into the TitanNit gui.
+=== Made by Karlo ===
+German and English languages have been made and have been merged into svn.
+To support future languages you can use this program to download  the language base files from the svn for conversion it supports UTF-8 so special
+chracters from various languages can be implemented.
+Please check the [[http://www.aaf-digital.info/forum/showthread.php?98565-TitanNitLanguageEditor forum Link | main thread]] for the latest version, or the [#point9.6.7 Changelog]:
+This program requires microsoft visual basic runtime files to operate.
+Once you have made a Translation you may upload the translation po files to the aaf forum for implementation into TitanNit.
+If you think you can help with a translation please do so at the end of this page there is information on ([#point9.6.5 Submission]).
+[[br]]
+----
+'''Features''' ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+* load po file from svn __"File/ Open Source (svn)"__
+* Import po file from svn or local as source __"File/ Import Titan.po"__
+* open local file as target__"File/ Open target (local)"__
+* save target file __"File/ Save Target"__
+* save target file as titan.po __"File/ Save titan.po"__
+* export msg string for external use __"File/ Export msgstr as Titan.po"__
+* Build reciever translation file __"File/ Build Titan.mo"__
+* export sourcefile to target __"Edit/ target.po -> target"__
+* view source target differences __"Edit/ diff target - titan.po"__
+[[br]]
+----
+'''Functions'''  ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+''Select an item to view more info:''
+* ([#point9.6.1 Loading a translation from svn])
+* ([#point9.6.2 Loading a Translation from a local directory])
+* ([#point9.6.3 Import Translation from svn or local (Source/ Target Mode)])
+* ([#point9.6.4 Edit Translation])
+* ([#point9.6.5 Submission])
+* ([#point9.6.6 Local Testing])
+----
+'''Loading a translation from svn''' [=#point9.6.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+To load a translation from the server SVN repo select the translation file from the menu: [[br]]
+[[Image(source:/wiki/Wiki-Pictures/NL/TLE/open_server.jpg)]] [[br]]
+it will then start downloading from the internet.[[br]]
+[[Image(source:/wiki/Wiki-Pictures/NL/TLE/loading_server.jpg)]] [[br]]
+[[br]]
+([#point9.6 Top of Page])
+[[br]]
+----
+'''Loading a Translation from a local directory''' [=#point9.6.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+To load a translation from the local directory select the translation file from the menu: [[br]]
+[[Image(source:/wiki/Wiki-Pictures/NL/TLE/open_local.jpg)]] [[br]]
+[[br]]
+([#point9.6 Top of Page])
+[[br]]
+----
+'''Import Translation from svn or local (Source/ Target Mode)'''[=#point9.6.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+To import a translation from svn or the local directory select the translation file from the menu: [[br]]
+Note: for this to work a source file must be loaded first [[br]]
+[[Image(source:/wiki/Wiki-Pictures/NL/TLE/import_file.jpg)]] [[br]]
+[[br]]
+you will then be dispalyed with this view to view the two po files along side each other:
+[[Image(source:/wiki/Wiki-Pictures/NL/TLE/import_list_view.jpg)]] [[br]]
+[[br]]
+you can then select __"Edit/ diff target - titan.po"__ to view the source and target differences.
+[[Image(source:/wiki/Wiki-Pictures/NL/TLE/diff_target.jpg)]] [[br]]
+[[br]]
+you can also automatically merge the source files to the target file  by selecting __"Edit/ target.po -> target"__
+[[br]]
+([#point9.6 Top of Page])
+[[br]]
+----
+'''Edit Translation''' [=#point9.6.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+Now that it is loaded you may edit the msgid strings to suit your language and upload to the aaf forum.
+you may use the buttons on the lower taskbar to search for strings you wish to edit.[[br]]
+[[Image(source:/wiki/Wiki-Pictures/NL/TLE/edit.jpg)]]
+[[br]]
+([#point9.6 Top of Page])
+[[br]]
+----
+'''Submission'''[=#point9.6.5]  ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+If you could submit your completed translation file into the thread below for comitting by the devs into svn.
+please note that some translations may no be able to be imported into some receivers due to memory constarints.
+[http://www.aaf-digital.info/forum/showthread.php?98565-TitanNitLanguageEditor forum Link]
+[[br]]
+([#point9.6 Top of Page])
+[[br]]
+----
+'''Local Testing''' [=#point9.6.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+If you wish to install your modified language files into your reciever for testing you can so by exporting you file an a titan.mo file you can do this by selecting __"File/ Build Titan.mo"__ for this to work you need to install some aditional components  in to the program directory.
+To do this create a folder in the program directory called __"gettext"__ and extract the below files into that directory:
+[http://ftp.informatik.rwth-aachen.de/ftp/pub/gnu/gettext/gettext-runtime-0.13.1.bin.woe32.zip gettext-runtime] [[br]]
+[http://ftp.informatik.rwth-aachen.de/ftp/pub/gnu/libiconv/libiconv-1.9.1.bin.woe32.zip libiconv] [[br]]
+[http://ftp.informatik.rwth-aachen.de/ftp/pub/gnu/gettext/gettext-tools-0.13.1.bin.woe32.zip gettext-tools] [[br]]
+Once you have exported your titan.mo file you may ftp or manually copy it onto your Receiver to test it.
+The file needs to go into the directory and a reboot neede to be proformed afterwards:  '''/var/usr/local/share/titan/po/__??__/LC_MESSAGES/titan.mo)''' where __??__ is the language file you are editing.
+''Note: if you have trouble exporting the translation to a mo file place the program directory on the root of your harddisk it can some times fail if the program it too deep in the file system''
+[[br]]
+([#point9.6 Top of Page])
+[[br]]
+----
+'''Change log''' [=#point9.6.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+Version 0.7 :
+ * Loading and saving is now Uniformly in UTF- 8! Now special characters can be used from other languages.
+Version 0.8 :
+ * minor changes
+ * 'Build titan.mo ' for more infomation see ([#point9.6.6 Local Testing])
+Version 0.8.1 :
+ * 1 Column now displays the line number of the msgid
+ * 'Build titan.mo ' - in case of error in a makeMo.cmd Prog -Dir is created at the (click ) is probably better to see what 's going on
+ * 'Edit / show only diff ' - same entries appear at msgid <> titan.po from
+Version 0.8.2 :
+ * Fixed tooltip error
+Version 0.9.0 :
+ * Fixed Error 13 - Thanks to Channel beta-testing
+ * 'Import 2 po file ' to load an alternate po -files
+ * ' titan.po -> Target' copied now empty fields Double entry copied by msgid
+version 0.9.1 :
+ * svn version is displayed and saved as ' .... po.55555.svn '
+ * thus can also be compared with an old ( stored ) version
+[[br]]
+([#point9.6 Top of Page])
+[[br]]

wiki/pages/nl/File-Browser

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.2.5 File Browser''' [=#point3.2.5] ([wiki:Interface-Operation#point3.2 Media Center (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(http://sbnc.dyndns.tv/trac/export/26462/wiki/Wiki-Pictures/NL/file_manager.jpg)]][[br]]
+>
+>Here you can browse files from any source available from your decoder (local or network)
+> you may do such things as copy delete and move.
+[[br]]

wiki/pages/nl/Filesystem-Check

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.5.1 File system Check''' [=#point3.5.5.1] ([WikiStart#point3.5 System (Back])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Filesystem-Check.jpg)]][[br]]
+>
+Here you can format your harddisk select an item and follow the onscreen prompts.
+[[br]]
+[[BR]]

wiki/pages/nl/Format-Hdd

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.5 Hard Disk''' [=#point3.5.5] ([wiki:Interface-Operation#point3.5 system (Back)])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Format-Hdd.jpg)]][[br]]
+>
+Here you can format your harddisk select an item and follow the onscreen prompts.
+Note that you must enable ([wiki:Adjust#point3.6.7 Expertmode]) to show all available format options in this display.
+[[br]]
+[[BR]]

wiki/pages/nl/Free-Space

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.8.2 Free Space''' [=#point3.7.8.2] ([wiki:System-Info#point3.7.8 System Info (Back])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Free-Space.jpg)]][[br]]
+>
+Here you can view the free space of all the file systems acessable from the decoder.
+[[br]]
+[[br]]

wiki/pages/nl/Functions

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''2 Interface Elements''' [=#point2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+[[br]]
+This section will show the functions and controls of the various elements in the gui within TitanNit and discriptions to the various
+items and their functions aswell as helpfull information and tricks to get the most possible experience with your Receiver.
+Note: pictures in this area only apply to the default skin used in Titan.
+If you do not see a specific menu item on the display please select the default skin from the menu as follows all the functions displayed below are implemented in all skins but some elements may be omitted from the display in some skins:
+ Press the __"Menu"__ button and select __"Settings"__ scroll down to __"Skin"__ and select the __"Default"__ Skin from the menu.
+ The decoder will then reboot with the new selected __Default__ skin.
+----
+{{{#!div style="width: 1100px; margin: auto"
+ {{{#!table style="border: none"
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/Infobar.png,align=left,link=[#point2.1])]]
+  }}}
+  '''[#point2.1 infobar]'''[[br]]
+  {{{#!div style="float: left
+Default display when pressing the __Info__ button while watching TV.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/playback_infobar.png,align=left,link=[wiki:History#point2.2 TitanNit Info])]]
+  }}}
+  '''[#point2.2 Playback infobar]'''[[br]]
+  {{{#!div style="float: left
+Default display when pressing the __Info__ button while watching A recording or Media using the default player.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/AudioTracks_infobar.png,align=left,link=[#point2.3])]]
+  }}}
+  '''[#point2.3 Audiotracks infobar]'''[[br]]
+  {{{#!div style="float: left
+Default display when pressing the __Audio__ button while watching TV, A recording or Media using the default player.
+  }}}
+  }}}
+  |----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/Channel History.png,align=left,link=[#point2.4])]]
+  }}}
+  '''[#point2.4 Channel History]'''[[br]]
+  {{{#!div style="float: left
+Default display when pressing the __Recall__ button while watching A recording or Media using the default player.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/Sleep_Timer.png,align=left,link=[#point2.5])]]
+  }}}
+  '''[#point2.5 Sleep Timer]'''[[br]]
+  {{{#!div style="float: left
+Default display when pressing the __Sleep_ button while the decoder is in operation.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/Subtitle.png,align=left,link=[#point2.6])]]
+  }}}
+  '''[#point2.6  Subtitle]'''[[br]]
+  {{{#!div style="float: left
+Default display when pressing the __Subtitle__ button while watching TV, A recording or Media using the default player.
+  }}}
+  }}}
+  |----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/EPG.png,align=left,link=[#point2.7])]]
+  }}}
+  '''[#point2.7 EPG]'''[[br]]
+ {{{#!div style="float: left
+Default display when pressing the __EPG__ button while watching TV.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/program_info.png,align=left,link=[#point2.8])]]
+  }}}
+  '''[#point2.8 Program Info]'''[[br]]
+   {{{#!div style="float: left
+Default display when pressing the __Info__ button while viewing the EPG.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/player.png,align=left,link=[#point2.9])]]
+  }}}
+  '''[#point2.9 Player]'''[[br]]
+  {{{#!div style="float: left
+Default display when pressing the __Play_ button.
+  }}}
+  }}}
+  |----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/favourite.png,align=left,link=[#point2.10])]]
+  }}}
+  '''[#point2.10 Favourite]'''[[br]]
+  {{{#!div style="float: left
+Default display when pressing the __FAV__ button.
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/record.png,align=left,link=[#point2.11])]]
+  }}}
+  '''[#point2.11 Record]'''[[br]]
+  {{{#!div style="float: left
+Default display when pressing the __REC__ button while watching TV.
+  }}}
+  }}}
+ }}}
+}}}
+----
+[[BR]]
+'''Infobar''' [=#point2.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+[[Image(source:/wiki/Wiki-Pictures/NL/Info-OSD.jpg)]] [[br]]
+This overlay display shows when you press the __"INFO"__ button when viewing a tv channel. [[br]]
+It shows actual and next program information
+[[br]]
+'''Playback Infobar''' [=#point2.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+[[Image(source:/wiki/Wiki-Pictures/NL/Playback-OSD.jpg)]] [[br]]
+This overlay shows when you press the __"INFO"__ button when playing back a program or time shift is in operation. [[br]]
+It shows a list of the available buttons to use when in playbac/timeshift to do various things.
+[[br]]
+'''Audio Track''' [=#point2.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+[[Image(source:/wiki/Wiki-Pictures/NL/Audio-OSD.jpg)]] [[br]]
+This overlay shows when you press the __"AUDIO""__ button when viewing a tv channel. [[br]]
+It allows you to adjust the audio track on the current stream if an alternative audio source exists.
+[[br]]
+'''History''' [=#point2.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+[[Image(source:/wiki/Wiki-Pictures/NL/History-OSD.jpg)]] [[br]]
+This overlay shows when you press the __"RECALL"__ button when viewing a tv channel. [[br]]
+It allows you to recall the past viewed channels for fast zapping between them.
+[[br]]
+'''Sleep Timer''' [=#point2.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+[[Image(source:/wiki/Wiki-Pictures/NL/Sleep-OSD.jpg)]] [[br]]
+This overlay shows when you press the __"SLEEP"__ button. [[br]]
+It allows you to set the shutdown timer to automatically shutdown the receiver.
+[[br]]
+'''Subtitle''' [=#point2.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+[[Image(source:/wiki/Wiki-Pictures/NL/Subtitle-OSD.jpg)]] [[br]]
+This overlay shows when you press the __"SUBTITLE"__ button. [[br]]
+It allows you to select/enable a subtitle during playback.
+[[br]]
+'''EPG''' [=#point2.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+[[Image(source:/wiki/Wiki-Pictures/NL/EPG-OSD.jpg)]] [[br]]
+This overlay shows when you press the __"EPG"__ button. [[br]]
+It shows a list of the program information from here you can setup a timer or search the EPG.
+[[br]]
+'''Program Info''' [=#point2.8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+[[Image(source:/wiki/Wiki-Pictures/NL/Program-Info-OSD.jpg)]] [[br]]
+This Overlay shows when you press the __"INFO"__ button when in the EPG display. [[br]]
+This shows the current selected program information.
+[[br]]
+'''Player''' [=#point2.9] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+[[Image(source:/wiki/Wiki-Pictures/NL/Internal-Player-OSD.jpg)]] [[br]]
+This overlay shows when you press the __"PLAY"__ button. [[br]]
+It allows you to select a movie or recording to play it also has a basic file manager.
+[[br]]
+'''Favourite''' [=#point2.10] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+[[Image(source:/wiki/Wiki-Pictures/NL/Favourite-OSD.jpg)]] [[br]]
+This overlay shows when you press the __"FAV"__ button. [[br]]
+It allows you to brouse through your favourits lists.
+[[br]]
+'''Record''' [=#point2.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+[[Image(source:/wiki/Wiki-Pictures/NL/Record-OSD.jpg)]] [[br]]
+This overlay shows when you press the __"RECORD"__ button. [[br]]
+It allows you to set the record function on the current tv channel.
+[[br]]

wiki/pages/nl/Git-Changelog

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.7.7 GIT Changelog''' [=#point3.7.7] ([wiki:Interface-Operation#point3.7 Information (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Git_Changelog.jpg)]][[BR]]
+>
+> here you can git information.
+[[br]]

wiki/pages/nl/Graphic-EPG

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.1.3 Graphic EPG''' [=#point3.1.3] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/Graphical_EPG.jpg)]][[BR]]
+>
+Graphic EPG is a multi channel graphical EPG.
+[[br]]
+ '''Coloured and Extra Button's Functions"
+ The __"Coloured and Extra Buttons"__ along the bottom of the display bring up additional menus and options with in the Single EPG menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Red Button: (Timer)''' ||This will bring up the recording timer menu to set up a timer.||
+ ||'''0 key (EPG Search):''' ||This will search the EPG for text you specify and bring up a list of matches where you may press the red button to set up a timer.||
+ ||'''FAV Button: (Favourite)''' ||This will bring up Favourite Boquet menu to select the EPG you would like to display.||
+ ||'''Info Button: (Info)''' ||This will bring up the selected program's EPG info string.||
+For information on setting up a timer Recording using the red button see ([WikiStart#point103.10.6 Records]) for more info.
+For information on setting proforming an EPG search using the 0 Key see ([WikiStart#point103.10.5 EPG Search]) for more info.

wiki/pages/nl/HTTP-Settings

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.4.6 HTTP Settings''' [=#point3.5.4.6] ([wiki:Interface-Operation#point3.5.1 network (Back])
+>
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/HTTP-Settings.jpg)]][[br]]
+>
+Here you can setup your HTTP interface.
+[[br]]
+||'''Start HTTPD:''' ||Start the webserver.||
+ ||'''User:''' ||Sets the zoom level of the EPG to show more or less of a time span of the shown programs.||
+ ||'''Password:''' ||Set to yes to use picons or the alternative Picon sets in the infobar and EPG stored in /var/media/autofs/sda1/swapextensions/usr/local/share/titan/picons/ directory.||
+ ||'''HTTPD Port:''' ||Should the EPG be deleted before a the timed scan.||
+ ||'''IP for Stream:''' ||Behavior after the EPG scan is completed EPG scan: Nothing (Stand-By) or Switch Off (Deep Stand-By).||
+ ||'''Stream Port:''' ||Scan for a Media Highway EPG stream during EPG scan.||
+ ||'''Start RGUID:''' ||Scan for a Media Highway version 2 EPG stream during  EPG scan.||
+ ||'''RGUID Port''' ||Scan for an OpenTV EPG stream during EPG scan.||
+ To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.
+[[br]]
+----
+ '''Coloured Button's Functions"
+ The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.
+ please see below for more info on the functions of these buttons:.
+ ||'''Text Button: (Keyboard)''' ||This will bring up the onscreen keyboard to edit the currently selected test string.||

wiki/pages/nl/Hard-Disk

-                      r39056
+                      r39063
+[[TranslatedPages]]
+>----
+>'''3.5.5 Hard Disk''' [=#point3.5.5] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+>
+>Menu Picture place holder:
+>
+>[[Image(source:/wiki/Wiki-Pictures/NL/system-Hard_Disk.jpg)]][[BR]]
+>
+Here you can configure your harddisk.[[BR]]
+please select a menu item for more information.
+[[br]]
+ * ([wiki:Format-Hdd#point3.5.5.1 Format HDD])
+ * ([wiki:Filesystem-Check#point3.5.5.2 Filesystem Check])
+ * ([wiki:Configure#point3.5.5.3 Configure])
+ * ([wiki:Time-to-sleep#point3.5.5.4 Time to sleep])
+[[BR]]

wiki/pages/nl/History

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''1 TitanNit Info Contents ''' [=#point1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+[[br]]
+This section conatins information on TitanNit and frequently asked questions about it.
+Please choose an item below to find more information.
+You may select a skip to a specific setup topic or scroll down to read the complete guide.
+{{{#!div style="width: 1100px; margin: auto"
+ {{{#!table style="border: none"
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/About.png,align=left,link=[#point1.1])]]
+  }}}
+  '''([#point1.1 About])'''[[br]]
+  {{{#!div style="float: left
+click here to find info about TitanNit
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/History.png,align=left,link=[#point1.2])]]
+  }}}
+  '''([#point1.2 History])'''[[br]]
+  {{{#!div style="float: left
+click here to find info on the beginnings of TitanNit
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/Features.png,align=left,link=[#point1.3])]]
+  }}}
+  '''([#point1.3 Features])'''[[br]]
+  {{{#!div style="float: left
+click here to find info on the various features of TitanNit
+  }}}
+  }}}
+}}}
+}}}
+{{{#!div style="width: 1100px; margin: auto"
+ {{{#!table style="border: none"
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/Frequnetly_Asked_Questions.png,align=left,link=[#point1.4])]]
+  }}}
+  '''([#point1.4 Frequently Asked Questions])'''[[br]]
+  {{{#!div style="float: left
+Apendixcies/ references [[br]]to other setup related topics.
+  }}}
+  }}}
+}}}
+}}}
+[[br]]
+[[br]]
+----
+'''1 About''' [=#point1.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+[[br]]
+TitanNit is a semi closed source replacement operating system for kathrein and Atemio/Atevio digital set top receivers.
+It has come about  as the users/devs wanted something better than was currently available.
+TitanNit is spawned from other projects and is developed by users come devs so it is easy of use but yet still remains powerfull and configurable and feature packed.[[br]]
+[[br]]
+[[br]]
+----
+'''1 History''' [=#point1.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+[[br]]
+ * Everything started in April 2011. For almost three weeks our Developer Nit secretly worked on the foundation of Titan. After the presentation by Nit Obi and the rest of the team came on board. Everybody was surprised by the rapid development of the Titan Project.
+ * From the beginning the development and source of Titan was nonpublic, as it was not to be foreseen in which direction the development would go.
+ * After a development period of 6 months our hardware manufacturer Atemio declared interest in the project. Looking back at Years of support through Atemio with the Enigma2 Software, Atemio was given main priority for Titan project.
+ * A six-months agreement with Atemio was signed in December 2011.
+ * Due to the good cooperation the agreement was extended and is still in force.
+ * The basic idea for this project originated for various reasons:
+  * due to the missing Python Chip and low CPU speed the sh4 receivers have always had problems with Enigma2.
+  * the constant improvement and expansion of Enigma2 and the TDT Git was comprehensive and time-consuming.
+  * the alternative Neutrino GIT at that time was not layed out to support twin tuner Receivers.
+  * Nit then decided to combine both, the Enigma2 and the Neutrino, to a new Gui which implemented all advantages of both systems.
+  * Neutrinos main advantage has always been its speed
+  * Enigma2s advantage was the ease of integration and expansion with skins and extensions
+  * These two systems combined into one new system was the basic idea of Titan.
+[[br]]
+[[br]]
+----
+'''2 Features''' [=#point1.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+[[br]]
+'' Highlights of TitanNit ''
+     - Powerful Linux operating system
+     - Fast boot
+         - About 1 second from standby mode
+         - About 25 seconds from the deep standby mode
+     - Fast channel switching times (less than 1 second)
+     - Different menu interfaces (skins) including customization options
+     - Many options to customize the system to your needs
+     - Backup / Restore function
+     - Organized Favourites and Channel listings and the direct list of following Programs.
+     - Multi-Tuner
+     - Plug-in management
+     - Supports many media formats
+     - Wide range of plugins
+     - PC programs to personalize and convert the channel list
+     - Screen saver in radio mode
+     - Remote control buttons freely assignable
+     - Online update of the firmware with the ability to retain settings
+     - Low memory consumption
+     - 24 hour Forum Support
+     - Growing Community
+     - Web Interface
+     - Android app "timote"
+     - Windows App "tiView"
+     - Bouquets Editor "SatchannelListEditor"
+[[br]]
+----
+'''Frequently Asked Questions''' [=#point1.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+[[br]]
+'''What is Titan?'''[[br]]TitanNit is a semi closed source replacement operating system for kathrein and Atemio/Atevio digital set top receivers designed to completly replace the factory software.
+[[br]]
+'''What can Titan do?'''[[br]]Titan was primarally designed to play/view and record live tv services from tresterial, cable and satellite, it can also be used to play/view the most popular video, audio, and picture formats, and many more lesser-known formats, including:
+ Video - DVD-Video, VCD/SVCD, MPEG-1/2/4, DivX, XviD, Matroska
+Audio - MP3, AAC.
+Picture - JPG, GIF, PNG.
+These can all be played directly from the hard-drive or from a computer over a local network (LAN) internet IPTV services and media streams hosted by the [[wiki:Plugins-Player#point10.11 TiThek]] plugin.
+ TitanNit can play DVD-Video movies (with and without menus) from ISO/IMG images and even ZIP/RAR-archives with the use of the [[wiki:Plugins-Player#point10.11 dvd-player plugin]].
+ TitanNit has a simple user interface that's pleasant and easy to use.
+All these features enable your device to function as a full multimedia entertainment system for your tv for the whole family to enjoy.
+[[br]]
+[[br]]
+'''What features does TitanNit have?'''[[br]]See the complete list of supported features in the [[wiki:Versions#point6 software versions changelog]] for information of the offically supported features.
+[[br]]
+[[br]]
+'''Where can I suggest/request a new feature or function to be implemented into TitanNit?'''[[br]]You can log a NEW feature/function request in our tracker. Just make sure that you first remember to search for existing "Feature Requests" before logging a new request/ticket! (see [wiki:Troubleshooting#point12.1 12.1 Bug Reporting] for information on submitting a ticket).
+You may also post a copy of your suggestion in the feature-suggestion section of our [http://www.aaf-digital.info/forum/forum.php AAF Digital Forum] if you want it open for discussion,
+Please respect that your request only counts as a suggestion, there' s no guarantee that it will implemented soon or ever.
+Almost all users think their own ideas is the most important, and a very common comment is: "if you only add these features then TitanNit will be perfect for me".
+You could try bribing the devs with elaborate gifts :-) flattery will get you every where and agorant requests will most likely get your posts deleted or get you banned from the forum please follow the rules of the forum [http://www.aaf-digital.info/ here].
+[[br]]
+[[br]]
+'''When will this and that feature or function be supported by TitanNit?'''[[br]]TitanNit development is driven by the tasks that are important to the individual developers and to the hardware sponsors Atemio, if you have a funky idea or feature you wish implemented submit a request ticket (see [wiki:Troubleshooting#point12.1 12.1 Bug Reporting], but make an extensive search of the forum and tickets before requesting it as it has probally been sugested before.
+[[br]]
+[[br]]
+'''Is TitanNit, or the AAFTeam affiliated with Fortis, katherin or ..... or the hardware manufacturer of my Reciever?'''[[br]]No, TitanNit and its members are not in any way affiliated with the manufactures in any way. TitanNit is a third party operating system designed to replace the manufactures original operating system.
+[[br]]
+[[br]]
+'''Will the instalation of Titan Void my Warranty?'''[[br]]Yes probally but this software is tested to ensure it won't dammage your reciever and can be reverted at any time to a factory condition. please see [wiki:Supported-Receivers#point7 Supported Receivers] for a list of suspected supported receivers, If you have successfully installed TitanNit on your Receiver please inform an admin member so this list can be updated and verified.
+If the factory software was so feature packed and bugless there would be no need for software like TitanNit but sadly this is a world where software is driven by sales and purchases by the big players who request features, but TitanNit is a little different it was started just because the users/ devs wanted something better than what was handed to them by the manufacturer.
+[[br]]
+[[br]]
+'''Why is TitanNit Not available for my receiver model XXX?'''[[br]]TitanNit is funded by Atemio who supplys hardware to the devs in return for developing software for use on these devices.
+In future TitanNit may be available for your receiver as support in increaced, at this time Titan in in development for the Broadcom Mips Archeture for the upcomming release of the Atemio 5200 which will be the first non SH4 based reciever supported by TitanNit.
+[[br]]
+[[br]]
+'''How do I ...'''[[br]] I don't know I suggest you read the [wiki:Quick-Start-Guide#point0 Quick Start Guide], manual, check the rest of the wiki or proform a [http://www.aaf-digital.info/forum/search.php?search_type=1 search] on the forum, as it has most likely been asked before and you will find the answer, as a last resort post a question on the [http://www.aaf-digital.info/forum/forum.php AAF Digital Forum].
+[[br]]
+[[br]]
+'''Where should I put videos/music and pictures so that Titan can read it?''' [[br]]Anywhere you like. TitanNit can read off the local harddisk,usb sticks, or from network sources. Simply press "Add a Source" using the network Browser and browse away.
+>[[Image(source:/wiki/Wiki-Pictures/NL/Network-Browser.jpg, 25%)]][[br]]
+[[br]]
+[[br]]
+'''What is the default username and password to the built-in FTP server and telnet server?'''Both the default password and the user name is “root” (in lower case) as with many linux instalations.
+[[br]]
+[[br]]
+'''Can I watch recordings from my decoder when on holiday?'''[[br]]yes you can you will need to set up either a static ip on your home network or set up a dynadns server, from there you can log onto the web interface and use video lan to watch tv or your recordings.
+[[br]]
+[[br]]
+'''Can I thank and or Chat the TitanNit team?''[[br]]Yes sure you can jump on the [[http://www.aaf-digital.info/forum/ AAFforum]]  and leave a post and or stop by [wiki:Contact#point15 Skype] and request a invite the majority of us speak german, some of us speak english also.
+'''Do you accept donations?'''[[br]] the team is currently fully funded and no donations are nesessary but if you have some device that may be of use with titan feel free to contact us.
+'''How come the Wiki does not show how to operate feature or function.....?'''[[br]]Titan Is in development and is updated almost daily some features plugins or informations have yet to be merged in, this forum is open to editing by the community feel free to log in and add said feature's informatation to the wiki.
+[[br]]
+[[br]]
+([#point1 Top of Page])

wiki/pages/nl/Installation-Recovery

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''8 Installation and Recovery Contents''' [=#point8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+This section contains information on installation and removal of TitanNit from your receiver
+{{{#!div style="width: 1100px; margin: auto"
+ {{{#!table style="border: none"
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Atemio.png, 60px,align=left,link=http://www.atemio.de Atemio homepage)]]
+  }}}
+  '''SH4 Atemio'''[[br]]
+  {{{#!div style="float: left
+ [http://www.atemio.de Atemio homepage]
+ * [wiki:Installation-Recovery-SH4-Atemio#point8.000 Contents]
+ * [wiki:Installation-Recovery-SH4-Atemio#point8.001 Atemio510]
+ * [wiki:Installation-Recovery-SH4-Atemio#point8.002 Atemio520]
+ * [wiki:Installation-Recovery-SH4-Atemio#point8.003 Atemio530]
+ * [wiki:Installation-Recovery-SH4-Atemio#point8.004 Atemio7600]
+ * [wiki:Installation-Recovery-SH4-Atemio#point8.005 Atemio700]
+ * [wiki:Installation-Recovery-SH4-Atemio#point8.006 Atemio7000]
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Fortis.png, 60px,align=left,link=http://www.fortis.co.kr Fortis homepage)]]
+  }}}
+  '''SH4 Fortis'''[[br]]
+   {{{#!div style="float: left
+ [http://www.fortis.co.kr Fortis homepage]
+ * [wiki:Installation-Recovery-SH4-Fortis#point8.010 Contents]
+ * [wiki:Installation-Recovery-SH4-Fortis#point8.011 Fortis Clone]
+ * [wiki:Installation-Recovery-SH4-Fortis#point8.012 Bootloader Installation]
+ * [wiki:Installation-Recovery-SH4-Fortis#point8.013 Fortis FS-9000]
+ * [wiki:Installation-Recovery-SH4-Fortis#point8.014 Fortis FS-9200]
+ * [wiki:Installation-Recovery-SH4-Fortis#point8.015 Fortis HS-9510]
+ * [wiki:Installation-Recovery-SH4-Fortis#point8.016 Fortis HX-8200]
+ * [wiki:Installation-Recovery-SH4-Fortis#point8.017 Fortis HS-7810]
+  }}}
+  }}}
+ {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/homecast.png, 60px,align=left,link=http://www.myhomecast.nl Homecast homepage)]]
+  }}}
+  '''SH4 Homecast'''[[br]]
+ {{{#!div style="float: left
+ [http://www.myhomecast.nl Homecast homepage]
+ * [wiki:Installation-Recovery-SH4-Homecast#point8.020 Contents]
+ * [wiki:Installation-Recovery-SH4-Homecast#point8.021 Homecast Pro]
+  }}}
+  }}}
+  |----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/IPBox.png, 60px,align=left,link=http://www.abipbox.com/ AB IPBox homepage)]]
+  }}}
+  '''SH4 IPBox'''[[br]]
+  {{{#!div style="float: left
+ [http://www.abipbox.com/ AB IPBox homepage]
+ * [wiki:Installation-Recovery-SH4-IPBox#point8.030 Contents]
+ * [wiki:Installation-Recovery-SH4-IPBox#point8.031 Ipbox91]
+ * [wiki:Installation-Recovery-SH4-IPBox#point8.032 Ipbox900]
+ * [wiki:Installation-Recovery-SH4-IPBox#point8.033 Ipbox910]
+ * [wiki:Installation-Recovery-SH4-IPBox#point8.034 Ipbox9000]
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/kathrein.png, 60px,align=left,link=http://www.kathrein-gmbh.at kathrein homepage)]]
+  }}}
+  '''SH4 Katherin'''[[br]]
+  {{{#!div style="float: left
+ [http://www.kathrein-gmbh.at kathrein homepage]
+ * [wiki:Installation-Recovery-SH4-Katherin#point8.040 Contents]
+ * [wiki:Installation-Recovery-SH4-Katherin#point8.041 Ufs910]
+ * [wiki:Installation-Recovery-SH4-Katherin#point8.042 Ufs912]
+ * [wiki:Installation-Recovery-SH4-Katherin#point8.043 Ufs913]
+ * [wiki:Installation-Recovery-SH4-Katherin#point8.044 Ufs922]
+ * [wiki:Installation-Recovery-SH4-Katherin#point8.045 Ufc960]
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Spark.png, 60px,align=left,link=http://www.spark-tv.com Spark homepage)]]
+  }}}
+  '''SH4 Spark'''[[br]]
+  {{{#!div style="float: left
+ [http://www.spark-tv.com Spark homepage]
+ * [wiki:Installation-Recovery-SH4-Spark#point8.050 Contents]
+ * [wiki:Installation-Recovery-SH4-Spark#point8.051 Spark7111]
+ * [wiki:Installation-Recovery-SH4-Spark#point8.052 Spark7162]
+  }}}
+  }}}
+  |----
+ {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Atemio.png, 60px,align=left,link=http://www.atemio.de Atemio homepage)]]
+  }}}
+  '''Mips Atemio'''[[br]]
+  {{{#!div style="float: left
+ [http://www.atemio.de Atemio homepage]
+ * [wiki:Installation-Recovery-Mips-Atemio#point8.060 Contents]
+ * [wiki:Installation-Recovery-Mips-Atemio#point8.061 Atemio5000 AKA Nemesis]
+ * [wiki:Installation-Recovery-Mips-Atemio#point8.062 Atemio5200]
+ * [wiki:Installation-Recovery-Mips-Atemio#point8.063 Atemio6000]
+ * [wiki:Installation-Recovery-Mips-Atemio#point8.064 Atemio6100]
+ * [wiki:Installation-Recovery-Mips-Atemio#point8.065 Atemio6200]
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/beyonwiz.png, 60px,align=left,link=http://www.beyonwiz.com.au Beyonwiz homepage)]]
+  }}}
+  '''Mips Beyonwiz'''[[br]]
+ {{{#!div style="float: left
+ [http://www.beyonwiz.com.au Beyonwiz homepage]
+ * [wiki:Installation-Recovery-Mips-Beyonwiz#point8.070 Contents]
+ * [wiki:Installation-Recovery-Mips-Beyonwiz#point8.071 BeyonwizT4]
+  }}}
+  }}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Goldern_Interstar.png, 60px,align=left,link=http://www.golden-interstar.pl Golden Interstar homepage)]]
+  }}}
+  '''Mips Golden Interstar'''[[br]]
+  {{{#!div style="float: left
+ [http://www.golden-interstar.pl Golden Interstar homepage]
+ * [wiki:Installation-Recovery-Mips-Golden-Interstar#point8.080 Contents]
+ * [wiki:Installation-Recovery-Mips-Golden-Interstar#point8.081 Xpeedlx1/2]
+ * [wiki:Installation-Recovery-Mips-Golden-Interstar#point8.082 Xpeedlx3]
+  }}}
+  }}}
+  |----
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Miraclebox.png, 60px,align=left,link=http://www.miraclebox.se miraclebox homepage)]]
+  }}}
+  '''Mips Miraclebox[[br]]
+  {{{#!div style="float: left
+ [http://www.miraclebox.se Miraclebox homepage]
+ * [wiki:Installation-Recovery-Mips-Miraclebox#point8.090 Contents]
+ * [wiki:Installation-Recovery-Mips-Miraclebox#point8.091 MBUltra]
+ * [wiki:Installation-Recovery-Mips-Miraclebox#point8.092 MBMini]
+}}}
+}}}
+  {{{#!td align=center valign=top style="border: none; font-size: 115%"
+  {{{#!div style="float: left"
+[[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Sezam.png, 60px,align=left,link=http://www.sezam-club.ru/ homepage)]]
+  }}}
+  '''Mips Sezam'''[[br]]
+ {{{#!div style="float: left
+ [http://www.sezam-club.ru/ Mips Sezam homepage]
+ * [wiki:Installation-Recovery-Mips-Sezam#point8.100 Contents]
+ * [wiki:Installation-Recovery-Mips-Sezam#point8.101 Sezam-Marvel]
+ * [wiki:Installation-Recovery-Mips-Sezam#point8.102 Sezam-1000HD]
+  }}}
+  }}}
+}}}
+}}}
+----
+'''8.113 IRD Download Locations''' [=#point8.113] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+* [wiki:Manufactures#point13 13 Manufactures] - [http://atemio.de/index.php/software-updates Stable Images][[br]]
+* [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]
+  '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
+* [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6  iboot sh4 loader flashing and recovery ][[br]]
+[[br]]
+[#point8 Top of Page]
+[[br]]

wiki/pages/nl/Installation-Recovery-Mips-Atemio

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''8.061 Mips Atemio''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+manufacturer blurb.....
+----
+'''8.061 Atemio-Nemesis''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 5000 Update UBI image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
+   then the installation begins, Only then release the button.
+    Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.062 Atemio5200''' [=#point8.062] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 5200 Update UBI image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
+   then the installation begins, Only then release the button.
+    Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.063 Atemio6000''' [=#point8.063] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 6000 Update UBI image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
+   then the installation begins, Only then release the button.
+    Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.064 Atemio6100''' [=#point8.064] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 6100 Update UBI image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
+   then the installation begins, Only then release the button.
+    Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.065 Atemio6200''' [=#point8.065] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 6200 Update UBI image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
+   then the installation begins, Only then release the button.
+    Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]

wiki/pages/nl/Installation-Recovery-Mips-Beyonwiz

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''8.071 Beyonwiz''' [=#point8.070] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+manufacturer blurb.....
+----
+'''8.071 Beyonwiz T4''' [=#point8.071] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Beyonwiz T4 Update UBI image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
+   then the installation begins, Only then release the button.
+    Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]

wiki/pages/nl/Installation-Recovery-Mips-Golden-Interstar

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''8.080 Goldern interstar Xpeedlx1/2''' [=#point8.080] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
+----
+manufacturer blurb
+----
+'''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
+----
+''How do I install a Xpeedlx1/2 update image? ''
+ * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped firmware folder "xpeedlx3"  to a formatted FAT32 USB stick.
+    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the update image file
+ * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
+Note: If installation does not start, use a different USB stick.
+•After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.082 goldern interstar Xpeedlx3''' [=#point8.082] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
+----
+''How do I install a Xpeedlx3 update image? ''
+ * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.
+    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the update image file
+ * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
+Note: If installation does not start, use a different USB stick.
+•After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]

wiki/pages/nl/Installation-Recovery-Mips-Miraclebox

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''8.090 Miraclebox''' [=#point8.090] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+manufacturer blurb......
+----
+'''8.091 Miraclebox Ultra''' [=#point8.091] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Miraclebox Ultra Update UBI image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
+   then the installation begins, Only then release the button.
+    Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.092 Miraclebox Mini''' [=#point8.092] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Miraclebox Mini Update UBI image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
+   then the installation begins, Only then release the button.
+    Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]

wiki/pages/nl/Installation-Recovery-Mips-Sezam

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''8.100 Sezam-Marvel''' [=#point8.100] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
+----
+manufacturer blurb....
+----
+'''8.101 Sezam-Marvel''' [=#point8.101] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
+----
+''How do I install a Sezam-Marvel  update image? ''
+ * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
+    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the update image file
+ * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
+Note: If installation does not start, use a different USB stick.
+•After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.102 Sezam-1000HD''' [=#point8.102] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
+----
+''How do I install a Sezam-1000HD  update image? ''
+ * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
+    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the update image file
+ * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
+Note: If installation does not start, use a different USB stick.
+•After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]

wiki/pages/nl/Installation-Recovery-SH4-Atemio

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''SH4 Atemio (Atevio)'''[=#point8.00]
+----
+The SH4 Atemio recievers are manufactured by Fortis who are a Korean manufacturer of satellite receivers all atemio (atevio) models are compatible with TitanNit.
+as TitanNit was developed for these recievers no bootloader software ID changes are required to install TitanNit, some of these models cam factory supplied with TitanNit such as the atemio  530.
+'''SH4 Atemio Contents'''
+ * [#point8.001 8.001 Atemio510]
+ * [#point8.002 8.002 Atemio520]
+ * [#point8.003 8.003 Atemio530]
+ * [#point8.004 8.004 Atemio7600]
+ * [#point8.005 8.005 Atevio700]
+ * [#point8.006 8.006 Atevio7000]
+'''Additional Info'''
+ * [#point8.007 8.007 Uninstallation]
+ * [#point8.008 8.008 Update TitanNit]
+ * [#point8.009 8.009 IRD Download Location]
+----
+'''8.1 Atemio510 and Fortis HS-7810''' [=#point8.001] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 510 IRD image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
+   and the installation begins. Only then release the button
+     Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+  '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
+* [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6  iboot sh4 loader flashing and recovery ][[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.2 Atemio520''' [=#point8.002] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 520 IRD image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
+   and the installation begins. Only then release the button
+     Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+  '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
+* [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6  iboot sh4 loader flashing and recovery ][[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.3 Atemio530''' [=#point8.003] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 530 IRD image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
+   and the installation begins. Only then release the button
+     Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.4 Atemio7600 and Fortis HX-8200''' [=#point8.004] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 7600 IRD image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
+   and the installation begins. Only then release the button
+     Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+  '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
+* [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6  iboot sh4 loader flashing and recovery ][[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.5 Atevio700''' [=#point8.005] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 7600 IRD image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
+   and the installation begins. Only then release the button
+     Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+  '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
+* [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6  iboot sh4 loader flashing and recovery ][[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.6 Atevio7000 and Fortis FS-9000/9200''' [=#point8.006] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 7000 IRD image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
+   and the installation begins. Only then release the button
+     Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+  '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
+* [http://sbnc.dyndns.tv/trac/wiki/en/Remote-Device-Control#point4.6  iboot sh4 loader flashing and recovery ][[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.007 Uninstalling Titan''' [=#point8.007] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+If you have an Atemio (Atevio) receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.008 Update TitanNit''' [=#point8.008] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+There are two ways to update your TitanNit version and there are merits to both methods :
+IRD offline method see above [#point8.00 SH4 Atemio contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
+[[br]]
+''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
+Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
+Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
+[[br]]
+''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.009 IRD Download Locations''' [=#point8.009] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+* [wiki:Manufactures#point13 13 Manufactures] - [http://atemio.de/index.php/software-updates Stable Images][[br]]
+* [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]
+[[br]]
+[#point8 Top of Page]
+[[br]]

wiki/pages/nl/Installation-Recovery-SH4-Fortis

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''SH4 Fortis (hardware profile)'''[=#point8.010]
+----
+Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
+'''SH4 Fortis Contents'''
+ * [#point8.011 8.011 SH4 Fortis based clone receiver detection based on hardware profile]
+ * [#point8.012 8.012 Fortis HS-7810 (Atemio510)]
+ * [#point8.013 8.013 Fortis HX-8200 (Atemio7600)]
+ * [#point8.014 8.014 Fortis HS-9510 (Atevio700)]
+ * [#point8.015 8.015 Fortis FS-9000/9200 (Atevio7000)]
+'''Additional Info'''
+ * [#point8.012 8.016 Bootloader Installation] (required for a fortis/clone reciever to accept atemio software)
+ * [#point8.111 8.017 Uninstallation On other Fortis Receivers]
+ * [#point8.112 8.018 Update TitanNit]
+ * [#point8.113 8.019 IRD Download Location]
+----
+'''SH4 Fortis based clone receiver detection based on hardware profile''' [=#point8.011]
+----
+As it is virtually impossible to list every fortis clone box on this wiki and data would be repeated over and over again it is broken up into harware revisions to compair that to the atevio model of that box.
+This list will help you select the correct image and bootloader for your clone reciever below is a specifications list check the back of your manual included with your receiver and look at the table below to select the correct hardware model.
+See here for a full list of known Fortis ([wiki:Supported-Receivers#point7 Supported Receivers])
+{{{#!div style="width: 1000px; margin: auto"
+||'''Model System'''||'''Tuner'''||'''CPU'''||'''RAM'''||'''ROM (Flash)'''||'''USB'''||'''PVR Funktion'''||'''CardReader'''||'''Common interface'''||'''Display'''||'''Width'''||'''features'''||
+||[#point8.015 Fortis FS-9000 HD PVR]||DVB-S/S2 2||STI_7101 266 Mhz||192MB||32MB||2||Internal 2.5 or 3.5 SATA, external via USB||1 (*2)||2||12-digit 5x7matrix||43 cm|| ||
+||[#point8.015 Fortis FS-9200 HD PVR]||DVB-S/S2 2||STI_7101 266 Mhz||192MB||32MB||2||eSATA & USB||1 (*2)||2||12-digit 5x7matrix||34 cm|| ||
+||[#point8.014 Fortis HS-9510]||DVB-S/S2 1||STI_7101 266 Mhz||192MB||32MB||1||USB||1 (*2)||2||8-digit 14segment||34 cm|| ||
+||[#point8.013 Fortis HX-8200 HD PVR]||DVB-S/S2, DVB-T2, DVB-C 1/2||STI_7105 450 Mhz||256MB||64MB||3||Internal 2,5´´SATA-HDD external via eSATA + USB||2||2||12-digit 5x7matrix||34 cm||Plug&Play Tuner, Youtube, Browser, FreeTV+||
+||[#point8.012 Fortis HS-7810 HD PVR]||DVB-S/S2 1||STI_7110 450 Mhz||256MB||32MB||2||USB||1||2||4-digit 7segment||26 cm||YouTube, Browser, FreeTV+||
+}}}
+'''NOTE:'''[[BR]]
+ * The Fortis HS-7810 is a clone of the Atemio510/520 Models[[BR]]
+ * The Fortis HX-8200 is a clone of the Atemio7600 Model[[BR]]
+ * The Fortis HS-9510 is a clone of the Atemio700 clone Model[[BR]]
+ * The Fortis FS-9000/Fortis FS-9200 is a clone of the Atemio7000 Models
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.1 Fortis HS-7810 (Atemio510)''' [=#point8.012] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 510 IRD image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
+   and the installation begins. Only then release the button
+     Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.4 Fortis HX-8200 (Atemio7600)''' [=#point8.013] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Atemio 7600 IRD image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
+   and the installation begins. Only then release the button
+     Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.5 Fortis HS-9510 (Atevio700)''' [=#point8.014] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Fortis HS-9510 IRD image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
+   and the installation begins. Only then release the button
+     Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.6 Fortis FS-9000/9200 (Atevio7000)''' [=#point8.015] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Fortis FS-9000/9200 IRD image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver
+ * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
+   and the installation begins. Only then release the button
+     Note: If installation does not start , use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+'''Aditional Info'''
+----
+'''8.012 installation on other Fortis Receivers'''  [=#point8.016] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'''Installation Notes:'''
+''If you wish to try or install titan you need to install an Atemio/Atevio factory loader. The original Atemio Bootloader has a security code within so an installation of Titan is not possible with any other fortis loader''
+''If you wish to install Titan the loader version must be 1.54 or above. Titan versions above 1.32 require the new Iboot loader which needs to be installed first if not present.''
+''There are various ways that are explained below:''
+[[br]]
+'''AAF Recovery Tool (ART) method'''
+ * Install the AAF Recovery Tool (ART) and set up a connection to your receiver
+ * Set the IP address and subnet mask of your uboot environment.
+ * Reboot the receiver and reconnect to change the settings.
+ * Install the factory loader and reboot.
+ * The factory loader you installed is version 1.21 that you have to update to 1.54 to be compatible with Titan
+ * Visit the [http:((www-atemio.de Atemio] homepage or the [http://www.aaf-digital.info/forum AAF digital forum] and download the latest Atevio/Atemio loaader (1.54).
+ * Extract the zip file
+  * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     "HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your receiver
+ * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
+   and the installation begins. Only then release the button
+     Note: Should the installation not start, try a different USB stick.
+ * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.
+''You may now install Titan''
+[[br]]
+[#point8 Top of Page]
+[[br]]
+'''Cross Flash Method'''
+''This method explains how to install the HDF bootloader flash plugin to your fortis receiver and flash an Atemio/Atevio compatible bootloader from the plugin menu.''
+* Download the HDF Bootloader flash plugin from the [http://www.aaf-digital.info/forum AAF Digital forum].
+ * Extract the zip file
+ * Now copy the unzipped Plugin folder to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * go to the plugins section in your receiver and install the plugin and then start it.
+ * type in the password contained in the zip file and follow the onscreen prompts.
+ * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.
+''You may now install TitanNit''
+[[br]]
+[#point8 Top of Page]
+[[br]]
+'''Reseller Changer Tool Method'''
+''This method explains how to change the Reseler ID of an Atemio/Atevio compatible bootloader and flash it to any compatible Fortis receiver from the plugin menu.''
+* Visit the [http://www.atemio.de Atemio] homepage or the [http://www.aaf-digital.info/forum AAF digital forum] and download the latest Atevio/Atemio loader.
+ * Extract the zip file
+ * use the reseller ID changer tool and change the IRD to that of your reseller ID.
+ * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IRD file to your Receiver.
+ * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
+   and the installation begins. Only then release the button
+     Note: If installation does not start , use a different USB stick.
+ * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.
+This method requires you to also change the reseller ID to be able to install TitanNit.
+'''Be aware should it the installation fail or a loss of Power occur during the flashing process you could brick your receiver as there is no recovery method. Compatibility with other receivers is not guaranteed but you may find a list of compatible receivers in the [wiki:Supported-Receivers#point7 Supported Receivers] section.'''
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.111 Uninstalling Titan''' [=#point8.017] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
+Uninstalling titan and switching back to the original reseller loader can't be done (easily) for other fortis receivers but there is one simple alternative method outlined below.
+'''Uninstalling Titan on non Atemio/Atevio receiver and restore Reseller ID with Maxi-uboot'''
+If you have iboot installed then you must install a version of TitanNit older than 1.32 before using this method.
+This will install the factory Atemio loader that is compatible with the AAF Recovery Tool (ART) to be able to install the Maxiuboot Loader.
+In order for this method to work make sure the setting Allow __"Iboot Update"__ is enabled in [wiki:Remote-Device-Control#point4.6 Iboot].
+When successfully achieved you may start up ART from your PC and install Maxiuboot.
+[[br]]
+Once installed you may set up your bootargs and change your Reseller ID back to its factory settings. For flashin original Firmware or other Software please refere to your receivers' manual or instructions.
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.112 Update TitanNit''' [=#point8.018] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+There are two ways to update your TitanNit version and there are merits to both methods :
+IRD offline method see [#point8 Installation / Recovery] and select your Reciever model to show information on how to update titan using an IRD titannit image.
+[[br]]
+''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
+Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
+Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
+[[br]]
+''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.113 IRD Download Locations''' [=#point8.019] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+* [wiki:Manufactures#point13 13 Manufactures] - [http://atemio.de/index.php/software-updates Stable Images][[br]]
+* [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]
+[[br]]
+[#point8 Top of Page]
+[[br]]

wiki/pages/nl/Installation-Recovery-SH4-Homecast

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''8.020 Homecast''' [=#point8.020] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
+'''SH4 Homecast Contents'''
+ * [#point8.021 8.021 Homecast pro]
+'''Additional Info'''
+ * [#point8.022 8.022 Uninstallation]
+ * [#point8.023 8.025 Update TitanNit]
+ * [#point8.024 8.024 IRD Download Location]
+----
+'''8.021 Homecast Pro''' [=#point8.021] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Homecast UPDATEUSB Image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.2 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IMG file to your Receiver
+* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
+    then the installation starts. Only then release the button
+     Note: If installation does not start, use a different USB stick.
+ * The installation is finished when DONE appears on the receiver.
+ * Restart the machine after by the main switch again to .
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.022 Uninstalling Titan''' [=#point8.022] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+If you have an Homecast receiver all you have to do is install your original IMG file as explained above and no bootloader changes are necessary.
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.023 Update TitanNit''' [=#point8.023] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+There are two ways to update your TitanNit version and there are merits to both methods :
+IRD offline method see [#point8.020 Homecast Contents] and select your Receiver model to show information on how to update titan using an IRD TitanNit image.
+[[br]]
+''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed.
+Plugins and files installed to MNT or a valid configured storage device will retain there settings .''
+Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
+[[br]]
+''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.024 IRD Download Locations''' [=#point8.024] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+* [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]
+[[br]]
+[#point8 Top of Page]
+[[br]]

wiki/pages/nl/Installation-Recovery-SH4-IPBox

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''8.031 Ipbox''' [=#point8.030] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+Ipbox is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region.
+'''SH4 Ipbox Contents'''
+ * [#point8.031 8.031 Ipbox91]
+ * [#point8.032 8.032 Ipbox900]
+ * [#point8.033 8.033 Ipbox910]
+ * [#point8.034 8.034 Ipbox9000]
+'''Additional Info'''
+ * [#point8.035 8.035 Uninstallation]
+ * [#point8.036 8.036 Update TitanNit]
+ * [#point8.037 8.037 IRD Download Location]
+----
+'''8.031 Ipbox91''' [=#point8.031] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Ipbox 91 UPDATEUSB Image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IMG file to your Receiver
+* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
+    then the installation starts. Only then release the button
+     Note: If installation does not start, use a different USB stick.
+ * The installation is finished when DONE appears on the receiver.
+ * Restart the machine after by the main switch again to .
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.032 Ipbox900''' [=#point8.032] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Ipbox 900 UPDATEUSB Image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IMG file to your Receiver
+* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
+    then the installation starts. Only then release the button
+     Note: If installation does not start, use a different USB stick.
+ * The installation is finished when DONE appears on the receiver.
+ * Restart the machine after by the main switch again to .
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.033 Ipbox910''' [=#point8.033] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Ipbox 910 UPDATEUSB Image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IMG file to your Receiver
+* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
+    then the installation starts. Only then release the button
+     Note: If installation does not start, use a different USB stick.
+ * The installation is finished when DONE appears on the receiver.
+ * Restart the machine after by the main switch again to .
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.034 Ipbox9000''' [=#point8.034] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Ipbox 9000 UPDATEUSB Image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IMG file to your Receiver
+* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
+    then the installation starts. Only then release the button
+     Note: If installation does not start, use a different USB stick.
+ * The installation is finished when DONE appears on the receiver.
+ * Restart the machine after by the main switch again to .
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.035 Uninstalling Titan''' [=#point8.035] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+If you have an Ipbox receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.036 Update TitanNit''' [=#point8.036] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+There are two ways to update your TitanNit version and there are merits to both methods :
+IRD offline method see [#point8 Installation / Recovery] and select your Reciever model to show information on how to update titan using an IRD titannit image.
+[[br]]
+''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
+Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
+Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
+[[br]]
+''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.037 IRD Download Locations''' [=#point8.037] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+* [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]
+[[br]]
+[#point8 Top of Page]
+[[br]]

wiki/pages/nl/Installation-Recovery-SH4-Katherin

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
+'''SH4 Fortis Contents'''
+ * [#point8.041 8.041 Kathrein Ufs910]
+ * [#point8.042 8.042 Kathrein Ufs912]
+ * [#point8.043 8.043 Kathrein Ufs913]
+ * [#point8.044 8.044 Kathrein Ufs922]
+ * [#point8.045 8.045 Kathrein Ufs960]
+'''Additional Info'''
+ * [#point8.046 8.06 Uninstallation]
+ * [#point8.047 8.07 Update TitanNit]
+ * [#point8.048 8.08 IRD Download Location]
+----
+'''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install a Kathrein UFS910 update image? ''
+ * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
+ * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows, but a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the img file to the front USB Port
+ * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds)
+   until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button-
+     Note: If installation does not start, use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install a Kathrein UFS912 update image? ''
+ * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ .
+     Note: The USB stick should not be formatted with windows, but a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the img file
+ * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
+   then the installation begins. Only after that message release the -TV/Radio button-
+     Note: If installation does not start, use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8.1 Top of Page]
+[[br]]
+----
+'''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install a Kathrein UFS913 update image? ''
+ * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
+ * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
+     Note: The USB stick should not be formatted with windows, but a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the img file
+ * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
+   then the installation begins. Only after that message release the -TV/Radio button-
+     Note: If installation does not start, use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8.1 Top of Page]
+[[br]]
+----
+'''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install a Kathrein UFS922 update image? ''
+ * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
+ * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
+     Note: The USB stick should not be formatted with windows, but a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the img file
+ * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
+   then the installation begins. Only after that message release the -TV/Radio button-
+     Note: If installation does not start, use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install a Kathrein UFS960 update image? ''
+ * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
+ * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ .
+     Note: The USB stick should not be formatted with windows, but a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the img file
+ * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
+   then the installation begins. Only after that message release the -TV/Radio button-
+     Note: If installation does not start, use a different USB stick.
+ * After successfully installing the receiver will reboot and the installed image should start-up
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+There are two ways to update your TitanNit version and there are merits to both methods :
+IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
+[[br]]
+''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
+Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
+Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
+[[br]]
+''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
+[[br]]
+[#point8 Top of Page]
+[[br]]
+----
+'''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+[http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]
+[[br]]
+[#point8 Top of Page]
+[[br]]

wiki/pages/nl/Installation-Recovery-SH4-Spark

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''8.051 SPARK''' [=#point8.050] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+Spark is a reseller of the Fulan Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized hardware.
+'''SH4 Spark Contents'''
+ * [#point8.051 8.051 SPARK (7111)]
+ * [#point8.052 8.052 SPARK (7162)]
+'''Additional Info'''
+ * [#point8.053 8.053 Uninstallation]
+ * [#point8.054 8.054 Update TitanNit]
+ * [#point8.055 8.055 IRD Download Location]
+----
+'''8.051 SPARK (7111)''' [=#point8.051] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install a Spark (7111) Update Image? ''
+  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
+  * Extract the zip file
+  * Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2"
+     Note: The USB stick should not be formatted with windows, but a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+  * Turn off the device.
+  * Connect the USB stick with the update file
+  * hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears,
+    then the installation will begin, when you see "U LD" in the display release the "OK" button.
+      Note: If the installation does not start, use a different USB stick.
+  * After installation "SUCC" appears in the display boot the receiver and the new image should appear.
+[[br]]
+[#point8.050 Top of Page]
+[[br]]
+----
+'''8.052 SPARK7162''' [=#point8.052] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install a Spark (7162) Update Image? ''
+  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
+  * Extract the zip file
+  * Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2"
+     Note: The USB stick should not be formatted with windows, but a separate program, such as the
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+  * Turn off the device.
+  * Connect the USB stick with the update file
+  * hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears,
+    then the installation will begin, when you see "U LD" in the display release the "OK" button.
+      Note: If the installation does not start, use a different USB stick.
+  * After installation "SUCC" appears in the display boot the receiver and the new image should appear.
+[[br]]
+[#point8.050 Top of Page]
+[[br]]
+----
+'''8.053 Uninstalling Titan''' [=#point8.053] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
+[[br]]
+[#point8.050 Top of Page]
+[[br]]
+----
+'''8.054 Update TitanNit''' [=#point8.054] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+There are two ways to update your TitanNit version and there are merits to both methods :
+IRD offline method see [#point8 Installation / Recovery] and select your Receiver model to show information on how to update titan using an IRD TitanNit image.
+[[br]]
+''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed.
+Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
+Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
+[[br]]
+''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
+[[br]]
+[#point8.050 Top of Page]
+[[br]]
+----
+'''8.055 IRD Download Locations''' [=#point8.055] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])
+----
+[http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]
+[[br]]
+[#point8.050 Top of Page]
+[[br]]

wiki/pages/nl/Interface-Operation

-                      r39056
+                      r39063
+[[TranslatedPages]]
+----
+'''3 Interface and Operation Contents''' [=#point3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+New Gui section work in progress expect dead links or missing data.
+----
+== Interface and Operation ==
+This section contains information about the on screen menus within TitanNit and discriptions to the various
+items and their functions aswell as helpfull information and tricks to get the most possible experience with your Receiver.
+Note: pictures in this area only apply to the default skin used in Titan.
+If you do not see a specific menu item on the display please select the default skin from the menu as follows:
+ Press the __"Menu"__ button and select __"Settings"__ scroll down to __"Skin"__ and select the __"Default"__ Skin from the menu.
+ The decoder will then reboot with the new selected __Default__ skin.
+[[Image(source:/wiki/Wiki-Pictures/NL/Mainmenu.jpg)]][[br]]
+TitanNit is an easy to use GUI for Linux receivers. Using the default skin (Factory setting) all options, settings and help texts are displayed, so you have an overview of all functions and possible settings for customization.
+The newer Receiver types like Atemio520  have a help button on the remote where detailed help can be displayed on screen. Thus you do not need to refer to the manual for help. This help display will be optimized / enhanced in the future.
+Interface and operation contents
+ please select a menu item from the GUI for more information
+ * ([#point3.1 Records and epg])
+ * ([#point3.2 Media center])
+ * ([#point3.3 Media player])
+ * ([#point3.4 Extentions])
+ * ([#point3.5 System])
+ * ([#point3.6 Settings])
+ * ([#point3.7 Information])
+ * ([#point3.8 Standby-Power Off])
+[[br]]
+[[br]]
+----
+'''Records and EPG''' [=#point3.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+[[Image(source:/wiki/Wiki-Pictures/NL/Recordsand_EPG.jpg)]][[br]]
+Records and Epg menu contains all the different views and search settings for the epg,
+it also allows setup and personalization of timer recordings
+ Please select a menu item for more specific information on that item.
+ * ([wiki:EPG-Short-View#point3.1.1 EPG Short View])
+ * ([wiki:Single-EPG#point3.1.2 Single EPG])
+ * ([wiki:Multi-EPG#point3.1.3 Multi EPG])
+ * ([wiki:Graphic-EPG#point3.1.4 Graphic EPG])
+ * ([wiki:EPG-Search#point3.1.5 EPG Search])
+ * ([wiki:Records#point3.1.6 Records])
+[[br]]
+----
+'''3.2 Media Center''' [=#point3.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+[[br]]
+[[Image(source:/wiki/Wiki-Pictures/NL/Media_Center.jpg)]][[br]]
+Media center contains all the different media players to play streams from local and online sources,
+it also contains a file browser and internet browser for setting up pay streams and login details for online media.
+ Please select a menu item for more specific information on that item.
+ * ([wiki:Audio-Player#point3.2.1 Audio Player])
+ * ([wiki:Video-Player#point3.2.2 Video Player])
+ * ([wiki:Picture-Player#point3.2.3 Picture Player])
+ * ([wiki:Mediathek#point3.2.4 Mediathek (Online library)])
+ * ([wiki:File-Browser#point3.2.5 File Browser])
+ * ([wiki:Internet-Browser#point3.2.6 Internet Browser])
+ * ([wiki:Weather#point3.2.7 Weather])
+[[br]]
+''' information'''
+Media Center It is a collection of media players intergrated in one place (able to stream local or the Internet based streams)
+''' Audio player '''
+ * File List mode (display different possible views quickly, default, large, cover, full cover)
+ * Play List mode (internal and external m3u Playlists)
+ * Automatic integration of MediaDB with covers and ID3 tag info extracted from the mp3 file
+ * Random mode (random)
+ * Repeat mode (repeat)
+ * Screen Saver (title text, scrolling images, jumping pictures, wallpapers)
+ * Radio mode (m3u files can be played back over the Internet in all popular protocols rtmp, rtmpe, rts, rtp, mms, http)
+ * All key formats supported via the installation of additional codec packs.
+ * Auto play the next file

Context Navigation

Legend: