Changeset 39063 for wiki/pages/nl/Installation-Recovery-Mips-Sezam
- Timestamp:
- 09/28/16 09:13:34 (8 years ago)
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
wiki/pages/nl/Installation-Recovery-Mips-Sezam
r39056 r39063 1 [[TranslatedPages]] 2 ---- 3 '''8.100 Sezam-Marvel''' [=#point8.100] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl]) 4 ---- 5 6 manufacturer blurb.... 7 8 9 10 11 12 ---- 13 '''8.101 Sezam-Marvel''' [=#point8.101] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl]) 14 ---- 15 ''How do I install a Sezam-Marvel update image? '' 16 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations]) 17 * Extract the zip file 18 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick. 19 Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 20 * Turn off the Receiver and disconnect all USB devices. 21 * Connect the USB stick with the update image file 22 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button. 23 24 Note: If installation does not start, use a different USB stick. 25 •After successfully installing the receiver will reboot and the installed image should start-up 26 [[br]] 27 [#point8 Top of Page] 28 [[br]] 29 ---- 30 '''8.102 Sezam-1000HD''' [=#point8.102] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl]) 31 ---- 32 ''How do I install a Sezam-1000HD update image? '' 33 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations]) 34 * Extract the zip file 35 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick. 36 Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 37 * Turn off the Receiver and disconnect all USB devices. 38 * Connect the USB stick with the update image file 39 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button. 40 41 Note: If installation does not start, use a different USB stick. 42 •After successfully installing the receiver will reboot and the installed image should start-up 43 [[br]] 44 [#point8 Top of Page] 45 [[br]]
Note: See TracChangeset
for help on using the changeset viewer.