Changeset 39063 for wiki/pages/nl/Installation-Recovery-SH4-Homecast
- Timestamp:
- 09/28/16 09:13:34 (8 years ago)
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
wiki/pages/nl/Installation-Recovery-SH4-Homecast
r39056 r39063 1 [[TranslatedPages]] 2 ---- 3 '''8.020 Homecast''' [=#point8.020] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 4 ---- 5 6 Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader. 7 8 '''SH4 Homecast Contents''' 9 10 * [#point8.021 8.021 Homecast pro] 11 12 13 '''Additional Info''' 14 15 * [#point8.022 8.022 Uninstallation] 16 * [#point8.023 8.025 Update TitanNit] 17 * [#point8.024 8.024 IRD Download Location] 18 19 ---- 20 '''8.021 Homecast Pro''' [=#point8.021] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 21 ---- 22 '' How do I install an Homecast UPDATEUSB Image? '' 23 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.2 IRD Download Locations]) 24 * Extract the zip file 25 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick. 26 Note: The USB stick should not be formatted with windows. Use a separate program, such as the 27 " HP USB Disk Storage Format Tool" (freeware program). 28 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 29 * Turn off the Receiver and disconnect all USB devices. 30 * Connect the USB stick with the IMG file to your Receiver 31 * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears, 32 then the installation starts. Only then release the button 33 Note: If installation does not start, use a different USB stick. 34 * The installation is finished when DONE appears on the receiver. 35 * Restart the machine after by the main switch again to . 36 [[br]] 37 [#point8 Top of Page] 38 [[br]] 39 40 ---- 41 '''8.022 Uninstalling Titan''' [=#point8.022] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 42 ---- 43 If you have an Homecast receiver all you have to do is install your original IMG file as explained above and no bootloader changes are necessary. 44 45 [[br]] 46 [#point8 Top of Page] 47 [[br]] 48 49 ---- 50 '''8.023 Update TitanNit''' [=#point8.023] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 51 ---- 52 There are two ways to update your TitanNit version and there are merits to both methods : 53 54 IRD offline method see [#point8.020 Homecast Contents] and select your Receiver model to show information on how to update titan using an IRD TitanNit image. 55 [[br]] 56 ''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed. 57 Plugins and files installed to MNT or a valid configured storage device will retain there settings .'' 58 59 Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update. 60 [[br]] 61 ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.'' 62 [[br]] 63 [#point8 Top of Page] 64 [[br]] 65 66 ---- 67 '''8.024 IRD Download Locations''' [=#point8.024] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 68 ---- 69 70 * [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 71 72 [[br]] 73 [#point8 Top of Page] 74 [[br]] 75
Note: See TracChangeset
for help on using the changeset viewer.