Changeset 39063 for wiki/pages/nl/Installation-Recovery-SH4-Katherin
- Timestamp:
- 09/28/16 09:13:34 (8 years ago)
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
wiki/pages/nl/Installation-Recovery-SH4-Katherin
r39056 r39063 1 [[TranslatedPages]] 2 ---- 3 '''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 4 ---- 5 6 Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader. 7 8 '''SH4 Fortis Contents''' 9 10 * [#point8.041 8.041 Kathrein Ufs910] 11 * [#point8.042 8.042 Kathrein Ufs912] 12 * [#point8.043 8.043 Kathrein Ufs913] 13 * [#point8.044 8.044 Kathrein Ufs922] 14 * [#point8.045 8.045 Kathrein Ufs960] 15 16 '''Additional Info''' 17 18 * [#point8.046 8.06 Uninstallation] 19 * [#point8.047 8.07 Update TitanNit] 20 * [#point8.048 8.08 IRD Download Location] 21 22 ---- 23 '''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 24 ---- 25 '' How do I install a Kathrein UFS910 update image? '' 26 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. 27 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 28 * Extract the zip file 29 * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick. 30 Note: The USB stick should not be formatted with windows, but a separate program, such as the 31 " HP USB Disk Storage Format Tool" (freeware program). 32 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 33 * Turn off the Receiver and disconnect all USB devices. 34 * Connect the USB stick with the img file to the front USB Port 35 * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds) 36 until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button- 37 Note: If installation does not start, use a different USB stick. 38 * After successfully installing the receiver will reboot and the installed image should start-up 39 [[br]] 40 [#point8 Top of Page] 41 [[br]] 42 ---- 43 '''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 44 ---- 45 '' How do I install a Kathrein UFS912 update image? '' 46 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 47 * Extract the zip file 48 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ . 49 Note: The USB stick should not be formatted with windows, but a separate program, such as the 50 " HP USB Disk Storage Format Tool" (freeware program). 51 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 52 * Turn off the Receiver and disconnect all USB devices. 53 * Connect the USB stick with the img file 54 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, 55 then the installation begins. Only after that message release the -TV/Radio button- 56 Note: If installation does not start, use a different USB stick. 57 * After successfully installing the receiver will reboot and the installed image should start-up 58 [[br]] 59 [#point8.1 Top of Page] 60 [[br]] 61 ---- 62 '''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 63 ---- 64 '' How do I install a Kathrein UFS913 update image? '' 65 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. 66 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 67 * Extract the zip file 68 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ . 69 Note: The USB stick should not be formatted with windows, but a separate program, such as the 70 " HP USB Disk Storage Format Tool" (freeware program). 71 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 72 * Turn off the Receiver and disconnect all USB devices. 73 * Connect the USB stick with the img file 74 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, 75 then the installation begins. Only after that message release the -TV/Radio button- 76 Note: If installation does not start, use a different USB stick. 77 * After successfully installing the receiver will reboot and the installed image should start-up 78 [[br]] 79 [#point8.1 Top of Page] 80 [[br]] 81 ---- 82 '''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 83 ---- 84 '' How do I install a Kathrein UFS922 update image? '' 85 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. 86 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 87 * Extract the zip file 88 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ . 89 Note: The USB stick should not be formatted with windows, but a separate program, such as the 90 " HP USB Disk Storage Format Tool" (freeware program). 91 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 92 * Turn off the Receiver and disconnect all USB devices. 93 * Connect the USB stick with the img file 94 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, 95 then the installation begins. Only after that message release the -TV/Radio button- 96 Note: If installation does not start, use a different USB stick. 97 * After successfully installing the receiver will reboot and the installed image should start-up 98 [[br]] 99 [#point8 Top of Page] 100 [[br]] 101 ---- 102 '''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 103 ---- 104 '' How do I install a Kathrein UFS960 update image? '' 105 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. 106 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 107 * Extract the zip file 108 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ . 109 Note: The USB stick should not be formatted with windows, but a separate program, such as the 110 " HP USB Disk Storage Format Tool" (freeware program). 111 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 112 * Turn off the Receiver and disconnect all USB devices. 113 * Connect the USB stick with the img file 114 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, 115 then the installation begins. Only after that message release the -TV/Radio button- 116 Note: If installation does not start, use a different USB stick. 117 * After successfully installing the receiver will reboot and the installed image should start-up 118 [[br]] 119 [#point8 Top of Page] 120 [[br]] 121 122 ---- 123 '''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 124 ---- 125 If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary. 126 127 [[br]] 128 [#point8 Top of Page] 129 [[br]] 130 131 ---- 132 '''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 133 ---- 134 There are two ways to update your TitanNit version and there are merits to both methods : 135 136 IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image. 137 [[br]] 138 ''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed. 139 Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .'' 140 141 Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update. 142 [[br]] 143 ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.'' 144 [[br]] 145 [#point8 Top of Page] 146 [[br]] 147 148 ---- 149 '''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 150 ---- 151 [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 152 153 [[br]] 154 [#point8 Top of Page] 155 [[br]]
Note: See TracChangeset
for help on using the changeset viewer.