Changeset 39247 for wiki/pages/fr/Installation-Recovery-Mips-Beyonwiz
- Timestamp:
- 10/10/16 00:40:09 (7 years ago)
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
wiki/pages/fr/Installation-Recovery-Mips-Beyonwiz
r37425 r39247 1 [[TranslatedPages]]2 ----3 '''8.071 Beyonwiz''' [=#point8.070] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 7 manufacturer blurb.....8 9 10 ----11 '''8.071 Beyonwiz T4''' [=#point8.071] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])12 ----13 '' How do I install an Beyonwiz T4 Update UBI image? ''14 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])15 * Extract the zip file16 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.17 Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).18 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.19 * Turn off the Receiver and disconnect all USB devices.20 * Connect the USB stick with the IRD file to your Receiver21 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".22 then the installation begins, Only then release the button.23 Note: If installation does not start , use a different USB stick.24 * After successfully installing the receiver will reboot and the installed image should start-up25 [[br]]26 [#point8 Top of Page]27 [[br]]
Note: See TracChangeset
for help on using the changeset viewer.