Ignore:
Timestamp:
01/10/17 06:02:14 (7 years ago)
Author:
aafsvn
Message:

[titan] autoupdate wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed

  • wiki/pages/ru/Installation-Recovery-SH4-Spark

    r37425 r39712  
    1 [[TranslatedPages]]
    2 ----
    3 '''8.051 SPARK''' [=#point8.050] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    4 ----
    5 
    6 Spark is a reseller of the Fulan Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized hardware.
    7 
    8 '''SH4 Spark Contents'''
    9 
    10  * [#point8.051 8.051 SPARK (7111)]
    11  * [#point8.052 8.052 SPARK (7162)]
    12 
    13 '''Additional Info'''
    14 
    15 
    16  * [#point8.053 8.053 Uninstallation]
    17  * [#point8.054 8.054 Update TitanNit]
    18  * [#point8.055 8.055 IRD Download Location]
    19 
    20 
    21 
    22 ----
    23 '''8.051 SPARK (7111)''' [=#point8.051] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    24 ----
    25 '' How do I install a Spark (7111) Update Image? ''
    26   * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
    27   * Extract the zip file
    28   * Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2"
    29      Note: The USB stick should not be formatted with windows, but a separate program, such as the
    30      " HP USB Disk Storage Format Tool" (freeware program).
    31      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    32   * Turn off the device.
    33   * Connect the USB stick with the update file
    34   * hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears,
    35     then the installation will begin, when you see "U LD" in the display release the "OK" button.
    36       Note: If the installation does not start, use a different USB stick.
    37   * After installation "SUCC" appears in the display boot the receiver and the new image should appear.
    38 [[br]]
    39 [#point8.050 Top of Page]
    40 [[br]]
    41 ----
    42 '''8.052 SPARK7162''' [=#point8.052] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    43 ----
    44 '' How do I install a Spark (7162) Update Image? ''
    45   * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
    46   * Extract the zip file
    47   * Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2"
    48      Note: The USB stick should not be formatted with windows, but a separate program, such as the
    49      " HP USB Disk Storage Format Tool" (freeware program).
    50      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    51   * Turn off the device.
    52   * Connect the USB stick with the update file
    53   * hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears,
    54     then the installation will begin, when you see "U LD" in the display release the "OK" button.
    55       Note: If the installation does not start, use a different USB stick.
    56   * After installation "SUCC" appears in the display boot the receiver and the new image should appear.
    57 [[br]]
    58 [#point8.050 Top of Page]
    59 [[br]]
    60 
    61 ----
    62 '''8.053 Uninstalling Titan''' [=#point8.053] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    63 ----
    64 If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
    65 
    66 [[br]]
    67 [#point8.050 Top of Page]
    68 [[br]]
    69 
    70 ----   
    71 '''8.054 Update TitanNit''' [=#point8.054] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
    72 ----
    73 There are two ways to update your TitanNit version and there are merits to both methods :
    74 
    75 IRD offline method see [#point8 Installation / Recovery] and select your Receiver model to show information on how to update titan using an IRD TitanNit image.
    76 [[br]]
    77 ''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed.
    78 Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
    79 
    80 Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
    81 [[br]]
    82 ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
    83 [[br]]
    84 [#point8.050 Top of Page]
    85 [[br]]
    86 
    87 ----   
    88 '''8.055 IRD Download Locations''' [=#point8.055] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
    89 ----
    90 [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
    91  
    92 [[br]] 
    93 [#point8.050 Top of Page] 
    94 [[br]]
Note: See TracChangeset for help on using the changeset viewer.