- Timestamp:
- 03/05/17 06:08:15 (7 years ago)
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
wiki/pages/pl/Installation-Recovery-Mips-Golden-Interstar
r37662 r40221 1 [[TranslatedPages]]2 ----3 '''8.080 Goldern interstar Xpeedlx1/2''' [=#point8.080] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])4 ----5 6 manufacturer blurb7 8 9 10 ----11 '''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])12 ----13 ''How do I install a Xpeedlx1/2 update image? ''14 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])15 * Extract the zip file16 * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.17 Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.18 * Turn off the Receiver and disconnect all USB devices.19 * Connect the USB stick with the update image file20 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.21 22 Note: If installation does not start, use a different USB stick.23 •After successfully installing the receiver will reboot and the installed image should start-up24 [[br]]25 [#point8 Top of Page]26 [[br]]27 ----28 '''8.082 goldern interstar Xpeedlx3''' [=#point8.082] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])29 ----30 ''How do I install a Xpeedlx3 update image? ''31 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])32 * Extract the zip file33 * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.34 Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.35 * Turn off the Receiver and disconnect all USB devices.36 * Connect the USB stick with the update image file37 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.38 39 Note: If installation does not start, use a different USB stick.40 •After successfully installing the receiver will reboot and the installed image should start-up41 [[br]]42 [#point8 Top of Page]43 [[br]]
Note: See TracChangeset
for help on using the changeset viewer.