Ignore:
Timestamp:
May 7, 2017, 6:07:18 AM (3 years ago)
Author:
aafsvn
Message:

[titan] autoupdate wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed
  • wiki/pages/en/Installation-Recovery-SH4-Katherin

    r37662 r40398  
    1 [[TranslatedPages]]
    2 ----
    3 '''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    4 ----
    5 
    6 Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
    7 
    8 '''SH4 Fortis Contents'''
    9 
    10  * [#point8.041 8.041 Kathrein Ufs910]
    11  * [#point8.042 8.042 Kathrein Ufs912]
    12  * [#point8.043 8.043 Kathrein Ufs913]
    13  * [#point8.044 8.044 Kathrein Ufs922]
    14  * [#point8.045 8.045 Kathrein Ufs960]
    15 
    16 '''Additional Info'''
    17 
    18  * [#point8.046 8.06 Uninstallation]
    19  * [#point8.047 8.07 Update TitanNit]
    20  * [#point8.048 8.08 IRD Download Location]
    21 
    22 ----
    23 '''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    24 ----
    25 '' How do I install a Kathrein UFS910 update image? ''
    26  * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
    27  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
    28  * Extract the zip file
    29  * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick.
    30      Note: The USB stick should not be formatted with windows, but a separate program, such as the
    31      " HP USB Disk Storage Format Tool" (freeware program).
    32      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    33  * Turn off the Receiver and disconnect all USB devices.
    34  * Connect the USB stick with the img file to the front USB Port
    35  * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds)
    36    until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button-
    37      Note: If installation does not start, use a different USB stick.
    38  * After successfully installing the receiver will reboot and the installed image should start-up
    39 [[br]]
    40 [#point8 Top of Page]
    41 [[br]]
    42 ----
    43 '''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    44 ----
    45 '' How do I install a Kathrein UFS912 update image? ''
    46  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
    47  * Extract the zip file
    48  * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ .
    49      Note: The USB stick should not be formatted with windows, but a separate program, such as the
    50      " HP USB Disk Storage Format Tool" (freeware program).
    51      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    52  * Turn off the Receiver and disconnect all USB devices.
    53  * Connect the USB stick with the img file
    54  * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
    55    then the installation begins. Only after that message release the -TV/Radio button-
    56      Note: If installation does not start, use a different USB stick.
    57  * After successfully installing the receiver will reboot and the installed image should start-up
    58 [[br]]
    59 [#point8.1 Top of Page]
    60 [[br]]
    61 ----
    62 '''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    63 ----
    64 '' How do I install a Kathrein UFS913 update image? ''
    65  * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
    66  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
    67  * Extract the zip file
    68  * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
    69      Note: The USB stick should not be formatted with windows, but a separate program, such as the
    70      " HP USB Disk Storage Format Tool" (freeware program).
    71      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    72  * Turn off the Receiver and disconnect all USB devices.
    73  * Connect the USB stick with the img file
    74  * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
    75    then the installation begins. Only after that message release the -TV/Radio button-
    76      Note: If installation does not start, use a different USB stick.
    77  * After successfully installing the receiver will reboot and the installed image should start-up
    78 [[br]]
    79 [#point8.1 Top of Page]
    80 [[br]]
    81 ----
    82 '''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    83 ----
    84 '' How do I install a Kathrein UFS922 update image? ''
    85  * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
    86  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
    87  * Extract the zip file
    88  * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
    89      Note: The USB stick should not be formatted with windows, but a separate program, such as the
    90      " HP USB Disk Storage Format Tool" (freeware program).
    91      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    92  * Turn off the Receiver and disconnect all USB devices.
    93  * Connect the USB stick with the img file
    94  * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
    95    then the installation begins. Only after that message release the -TV/Radio button-
    96      Note: If installation does not start, use a different USB stick.
    97  * After successfully installing the receiver will reboot and the installed image should start-up
    98 [[br]]
    99 [#point8 Top of Page]
    100 [[br]]
    101 ----
    102 '''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    103 ----
    104 '' How do I install a Kathrein UFS960 update image? ''
    105  * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
    106  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
    107  * Extract the zip file
    108  * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ .
    109      Note: The USB stick should not be formatted with windows, but a separate program, such as the
    110      " HP USB Disk Storage Format Tool" (freeware program).
    111      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    112  * Turn off the Receiver and disconnect all USB devices.
    113  * Connect the USB stick with the img file
    114  * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
    115    then the installation begins. Only after that message release the -TV/Radio button-
    116      Note: If installation does not start, use a different USB stick.
    117  * After successfully installing the receiver will reboot and the installed image should start-up
    118 [[br]]
    119 [#point8 Top of Page]
    120 [[br]]
    121 
    122 ----
    123 '''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    124 ----
    125 If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
    126 
    127 [[br]]
    128 [#point8 Top of Page]
    129 [[br]]
    130 
    131 ----   
    132 '''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
    133 ----
    134 There are two ways to update your TitanNit version and there are merits to both methods :
    135 
    136 IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
    137 [[br]]
    138 ''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
    139 Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
    140 
    141 Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
    142 [[br]]
    143 ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
    144 [[br]]
    145 [#point8 Top of Page]
    146 [[br]]
    147 
    148 ----   
    149 '''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
    150 ----
    151 [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
    152  
    153 [[br]] 
    154 [#point8 Top of Page] 
    155 [[br]]
Note: See TracChangeset for help on using the changeset viewer.