Ignore:
Timestamp:
Jun 17, 2017, 10:02:07 AM (2 years ago)
Author:
obi
Message:

reset wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed
  • wiki/pages/nl/Installation-Recovery-Mips-Atemio

    r40540 r40542  
     1[[TranslatedPages]]
     2----
     3'''8.061 Mips Atemio''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     4----
     5
     6manufacturer blurb.....
     7
     8
     9
     10
     11
     12----
     13'''8.061 Atemio-Nemesis''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     14----
     15'' How do I install an Atemio 5000 Update UBI image? ''
     16 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     17 * Extract the zip file
     18 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     19    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
     20     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     21 * Turn off the Receiver and disconnect all USB devices.
     22 * Connect the USB stick with the IRD file to your Receiver
     23 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
     24   then the installation begins, Only then release the button.
     25    Note: If installation does not start , use a different USB stick.
     26 * After successfully installing the receiver will reboot and the installed image should start-up
     27[[br]]
     28[#point8 Top of Page]
     29[[br]]
     30----
     31'''8.062 Atemio5200''' [=#point8.062] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     32----
     33'' How do I install an Atemio 5200 Update UBI image? ''
     34 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     35 * Extract the zip file
     36 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     37    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
     38     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     39 * Turn off the Receiver and disconnect all USB devices.
     40 * Connect the USB stick with the IRD file to your Receiver
     41 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
     42   then the installation begins, Only then release the button.
     43    Note: If installation does not start , use a different USB stick.
     44 * After successfully installing the receiver will reboot and the installed image should start-up
     45[[br]]
     46[#point8 Top of Page]
     47[[br]]
     48----
     49'''8.063 Atemio6000''' [=#point8.063] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     50----
     51'' How do I install an Atemio 6000 Update UBI image? ''
     52 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     53 * Extract the zip file
     54 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     55    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
     56     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     57 * Turn off the Receiver and disconnect all USB devices.
     58 * Connect the USB stick with the IRD file to your Receiver
     59 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
     60   then the installation begins, Only then release the button.
     61    Note: If installation does not start , use a different USB stick.
     62 * After successfully installing the receiver will reboot and the installed image should start-up
     63[[br]]
     64[#point8 Top of Page]
     65[[br]]
     66----
     67'''8.064 Atemio6100''' [=#point8.064] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     68----
     69'' How do I install an Atemio 6100 Update UBI image? ''
     70 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     71 * Extract the zip file
     72 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     73    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
     74     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     75 * Turn off the Receiver and disconnect all USB devices.
     76 * Connect the USB stick with the IRD file to your Receiver
     77 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
     78   then the installation begins, Only then release the button.
     79    Note: If installation does not start , use a different USB stick.
     80 * After successfully installing the receiver will reboot and the installed image should start-up
     81[[br]]
     82[#point8 Top of Page]
     83[[br]]
     84----
     85'''8.065 Atemio6200''' [=#point8.065] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     86----
     87'' How do I install an Atemio 6200 Update UBI image? ''
     88 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     89 * Extract the zip file
     90 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     91    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
     92     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     93 * Turn off the Receiver and disconnect all USB devices.
     94 * Connect the USB stick with the IRD file to your Receiver
     95 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
     96   then the installation begins, Only then release the button.
     97    Note: If installation does not start , use a different USB stick.
     98 * After successfully installing the receiver will reboot and the installed image should start-up
     99[[br]]
     100[#point8 Top of Page]
     101[[br]]
Note: See TracChangeset for help on using the changeset viewer.