Ignore:
Timestamp:
Jun 17, 2017, 10:02:07 AM (2 years ago)
Author:
obi
Message:

reset wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed
  • wiki/pages/nl/Installation-Recovery-Mips-Golden-Interstar

    r40540 r40542  
     1[[TranslatedPages]]
     2----
     3'''8.080 Goldern interstar Xpeedlx1/2''' [=#point8.080] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     4----
     5
     6manufacturer blurb
     7
     8
     9
     10----
     11'''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     12----
     13''How do I install a Xpeedlx1/2 update image? ''
     14 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
     15 * Extract the zip file
     16 * Now copy the unzipped firmware folder "xpeedlx3"  to a formatted FAT32 USB stick.
     17    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     18 * Turn off the Receiver and disconnect all USB devices.
     19 * Connect the USB stick with the update image file
     20 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
     21
     22Note: If installation does not start, use a different USB stick.
     23•After successfully installing the receiver will reboot and the installed image should start-up
     24[[br]]
     25[#point8 Top of Page]
     26[[br]]
     27----
     28'''8.082 goldern interstar Xpeedlx3''' [=#point8.082] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     29----
     30''How do I install a Xpeedlx3 update image? ''
     31 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
     32 * Extract the zip file
     33 * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.
     34    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     35 * Turn off the Receiver and disconnect all USB devices.
     36 * Connect the USB stick with the update image file
     37 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
     38
     39Note: If installation does not start, use a different USB stick.
     40•After successfully installing the receiver will reboot and the installed image should start-up
     41[[br]]
     42[#point8 Top of Page]
     43[[br]]
Note: See TracChangeset for help on using the changeset viewer.