Ignore:
Timestamp:
Jun 17, 2017, 10:02:07 AM (2 years ago)
Author:
obi
Message:

reset wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed
  • wiki/pages/nl/Installation-Recovery-Mips-Sezam

    r40540 r40542  
     1[[TranslatedPages]]
     2----
     3'''8.100 Sezam-Marvel''' [=#point8.100] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
     4----
     5
     6manufacturer blurb....
     7
     8
     9
     10
     11
     12----
     13'''8.101 Sezam-Marvel''' [=#point8.101] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
     14----
     15''How do I install a Sezam-Marvel  update image? ''
     16 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
     17 * Extract the zip file
     18 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
     19    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     20 * Turn off the Receiver and disconnect all USB devices.
     21 * Connect the USB stick with the update image file
     22 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
     23
     24Note: If installation does not start, use a different USB stick.
     25•After successfully installing the receiver will reboot and the installed image should start-up
     26[[br]]
     27[#point8 Top of Page]
     28[[br]]
     29----
     30'''8.102 Sezam-1000HD''' [=#point8.102] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
     31----
     32''How do I install a Sezam-1000HD  update image? ''
     33 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
     34 * Extract the zip file
     35 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
     36    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     37 * Turn off the Receiver and disconnect all USB devices.
     38 * Connect the USB stick with the update image file
     39 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
     40
     41Note: If installation does not start, use a different USB stick.
     42•After successfully installing the receiver will reboot and the installed image should start-up
     43[[br]]
     44[#point8 Top of Page]
     45[[br]]
Note: See TracChangeset for help on using the changeset viewer.